T.code for viewing stock at storage bin

Hi all,
What is the t. code used for viewing the stock at storge bin?I know this is WM question but your help is appreciated.
Regards,
Shailendra

Hi,
Following are the T-Codes:
LS26   Warehouse stocks per material
LI05    Inventory History for Storage Bin
LX02   Stock List
LX03   Bin Status Report
MB52  List fo warehouse stocks on hand
Regards,
Suresh' D.

Similar Messages

  • No stock at storage bin level

    hello,
    during outbound delivery creation, we need to do picking though transfer order.  but the system cannot find stock at storage bin level....
    how can we create stock at storgare bin level ?
    regds
    pamela

    Please check the stock for that item in LS24. If exists note down the storage type.
    Check whether the Storage type search sequence exists for that particulare storage type in the TO by creating it manually. Create TO --> Click Storage type srch seq in the top and then check whether the storage type exists in the search. If not enter the storage type and push stock figures in the top and enter the qty needed and save it. Hope it helps.
    Edited by: Mohanaselvan Jayaraj on May 3, 2011 10:23 PM

  • What is the T-code for Viewing the Payment Advices....

    Hi,
    What is the T-code for Viewing the Payment Advices....
    Regards
    Sap Guru

    Hi,
    Payment advice creation - FBE1
    Payment advice Change - FBE2
    Payment advice Display - FBE3
    Payment advice Delete - FBE6.
    Assign points if helpful.
    Thanks,
    Vasu..

  • Re : T-code for viewing SD document

    Hai
         I created sales order delivery billing documents. Let me know the t-code for viewing these document.
    Thanks
    mani

    hi,
    To View,
    For Sales Order : VA03
    For Delivery      :  VL03N
    For Billing        :   VF03
    To Change/Edit,
    For Sales Order : VA02
    For Delivery      :  VL02N
    For Billing        :   VF02
    Regards,
    Raghav

  • Same Storage Unit number for both source & destination storage bin

    Hi, I have a requirement to have same Storage Unit number for both source & destination storage bin in transfer order screen.. can any1 suggest how to do it?
    An early response is very much appreaciated

    Hello,
    You absolutely right.
    I've made necessary cust. settings berofe posting goods receipt with storage units:
    Customizing storage units number ranges:
    And storage units customizing:
    And also in Material Master:
    But i don't see the storage unit type number in storage bin:

  • Transaction code for viewing invoice document and Claims document

    Hi Experts,
    Can u please tell me the transaction codes for viewing invoice document and claims document in ECC.
    I am in CRM and i do not know about the ECC transaction codes.
    request you 2 help.
    Thanks and Regards
    Shilpi

    hi,
    MM flow:
    purchase Requestion (ME51)
    Request for Quatation (ME41)
    Quatation from different vendors (ME47)
    price comparision (ME49)
    purchase order send to vendors (ME22)
    goods reciepts (MIGO)
    logistic invoice verification (MIRO)
    SD flow:
    Enquirey (VA11)
    Quatation (VA21)
    sales order processing (VA01)
    delivery (VL01)
    billing (VF01)
    Also follow this link.
    The specified item was not found.
    i hope this will help you out
    -Thanks & regards
    Saurabh Goel

  • Transaction code for viewing Costing Sheet

    Hello Sap Gurus,
    I am a SAP user.Can you suggest me a Transaction code for viewing Costing Sheet.
    Regards,
    Pawan Kumar

    Dear Pawan Kumar,
    For checking the costing sheets related to product cost controlling use KZS2.
    For Costing sheets related to Internal orders use KALK.
    Regards
    Mangalraj.S
    Edited by: Mangalraj.S on Apr 20, 2009 3:06 PM

  • T-Code for reporting stock quantity difference between IM and WM

    Hi All
    I'm probably going to kick myself for asking this quastion but is there a report to show the stock quantity differences between IM and WM?
    I have searched the forum first but cannot find info.
    We have various differences in IM and WM shown in MD04 and LS26. This is usually the result of an unplanned plant to plant transfer not being recipted in at the destination plant.
    If no standard T-code is available, which tables can I join to create my own query?
    Thanks in advance
    Darren

    compare MMBE with LS26
    Make sure you dont enter a storage location and storage type in selection screen of LS26.
    if you post a difference with LI20, then you have just posted a difference within WM, means you moved a quantity from a bin into the difference storate type 998.  The balance of both is still equal to your stock shown in MMBE. You have to clear the difference with IM by executing LI21 transaction. Only then the quantity will disappear from difference storage type and will be adjusted in MM and FI.
    LX23 will only report real inconstencies and will adjust them.
    If you do a MM movement like 303, then this creates a transfer request in WM, this TR needs to be converted into a TO. to move the stock from the bin to the interim storage type for goods issue.
    In your case you created just a negative quant in the interim storage type for goods issue and still have a positive quant in the bin, the balance is equal to the stock shown in MMBE.

  • T.code for checking stock at WM level

    Hi Gurus,
                   I want to check the warehouse stock at Storage type level in previous week,Can any one give me T.Code where we can satisfy this requirement
    Regards
    Narayana

    Narayana,
    There is no std SAP WM report which will show you this. I will take some calculating to get a total for all movements for a material/ST/Bin/etc. I did it in excel and it took some time, but I'm sure you could write a basic query / ABAP report to get this.
    Good luck.
    Hein

  • T-Code to view stock report

    Dear Frndz,
    What is the T-code to view the system in-stock report.
    Regards,
    Srini

    Hi,
    In MMBE, enter material name, plant & storage location and click execute.
    Double click on the storage location, you will get a complete list with the different categories in which the stock is available (unrestricted stock/ blocked stock/ sales order stock, etc...)
    Regards,
    Ashok

  • Report on Stock in storage bin

    Dear Guru
    My client wants a report where in MF60 they will get the required quantity to be transferred from raw storage location  to production location.They want a report in which the stock to be transferred  from raw storage location is in which storage bin.
    Is there any standard report for this
    regards
    sam

    Hi,
    You can also use this report : LS26 to get an overview display per material.
    Or you can use LS03n per WM,storage stpe, storage bin to get history.
    Thanks
    Silas

  • Create the stock in storage bin level

    Hai all
         while i am doing transfer of order it is asking that storage unit type and the material stock is not maintained in storage bin .
    can anybody tell me how to maintain the stock in bin level .please help me is there any tcode for that
    regards
    satish

    Dear Satish
    A storage type generally contains several storage spaces or slots. These are called storage bins in Warehouse Management (WM). The storage bin is the smallest available unit of space in a warehouse. The storage bin therefore describes the position in the warehouse where the goods are or can be stored.
    Since the address of a storage bin is frequently derived from a coordinate system, a storage bin is often referred to as a coordinate. The coordinate 01-02-03 for example, can refer to a storage bin in row 1, stack 2, and level 3.
    You assign each storage bin to a specific warehouse number and storage type according to its location. You must also assign each storage bin to a storage section.
    You can also define the following additional characteristics of a storage bin:
             --> Maximum weight
             --> Total capacity
             --> Fire containment section
             --> Storage bin type (for example, for small or large pallets)
    With certain stock placement strategies, the storage bin type plays a significant role in optimizing the automatic search for a storage bin in connection with the pallet type. For example, you can define the WM putaway strategy to place large industrial pallets into a specific large bin type and smaller pallets into small bins.
    <i><b>For information on how to define storage bins, call up the Implementation Guide (IMG) for Warehouse Management and see under Master Data --> Storage Bins .</b></i>
    Generally speaking, you can use any combination of letters and numbers for a storage bin coordinate with the exception of certain alphanumeric characters that are used for stock placement strategy P (according to pallet or storage unit type).
    When goods are placed into storage, the system selects coordinates in ascending order according to specific sort criteria, and assigns the next available storage bin based on the coordinate structure you define for creating bins.
    Thanks
    G. Lakshmipathi

  • How to clear stock from storage bin and delete bins?

    Hi All
    For the development of prototype we have made some dummy warehouse structure and made stock movements with dummy bins. Now we wanted to go for real implementation. Before we made actual configurations, we wanted clear all dummy data. Can anyone suggest the standard process for clearing the stock, storage bins?
    Thanks
    Sasidhar Gupta

    Hi Sasidhar.
    is it non production system.
    If yes you can move all this stock in some other storage type as dummy with dummy name.
    and you can use all built as actuals.
    or do PI and remove all stock from system as not actual stock .
    and if its non production system then why are u worrying about all this. Let it be and start building your system as you require.
    Regards
    Suraj

  • List of stock by storage bin

    Hi,
    I need to display a list of materials by storage bin. How to display in this list the quantity and valuation of stock for each material and for each storage bin.
    Thanks for your comments and suggestions.

    Am not in front of the system, but if am right MBEW has fields called valuation area which is plant, matnr you should find in both tables.
    Check by doing the join of the said fields, if the system does not allow joins on MBEW table then use abap statements to read value.
    Hope the above helps.

  • WM::system is not placing the stock another storage bin

    hi friends
         system is not check fill the stock to another bin ..system is placing the stock in same bin...what are the cofiguration required?
    with regards
    dinesh
    Edited by: code acess on Jun 15, 2011 10:47 AM
    Edited by: code acess on Jun 15, 2011 10:48 AM

    hi SAP FC
                       Iam using putaway strategy is "L" ..storage is determing in the system ..every thing is working fine except placing  stock to another bin
    with regards
    dinesh
    Edited by: code acess on Jun 15, 2011 11:18 AM

Maybe you are looking for