Strange Access Connections toolbar icon

Can anyone explain what the X means in this screenshot? I am online and able to surf, so not sure what it means. Thanks

WiFi signal detected, but you're not connected.

Similar Messages

Access Connections and Tools won't install properly

I have followed advice uninstalled the wireless driver, access connections, hotkey, power manager. . Reinstalled all ( latest versions) except access connection. Wireless connections work correctly and all hot keys function appropriately ( including Fn +F5 ). Then I let TVSU download Access connections. An icon is placed in the task tray. Clicking on it nothing happens. Also none of the hot keys work including the blue ThinkVantage key. Once I uninstall Access connection I am back in business with the wireless connection and the hot keys working. ( for all these installs I turned off the Microsoft virus scanner and the firewall).
Have similar problem with ThinkVantage tools in that I get the Icon in the task tray and then the program freezes. No problem in reinstalling PC doctor5
T60 series2007 Windows XP professional pack3.

Hi dulverton,
I find lenovo drivers and software rather eccentric; since they need to be installed in a particular order to work properly.
First uninstall your wireless driver and access connections, thereafter reboot your system. Then install wireless driver first, again reboot, subsequently install access connections, reboot again.
Further this is the order in which the following drivers must be installed for each of them to function desirably:-
1) Lenovo PM driver
2) Lenovo System Interface Driver
3) Hotkey driver
4) Wireless driver software [reboot]
5) Access Connections [reboot]
Hope it helps.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel

Need help with thinkvantage access connection

Here a log file with new access connection:
Connection status:  Disconnected
Cause:  Driver disconnected while associating.
Error code:  229378
Recommended actions:
Verify that the encryption settings (WEP/TKIP/AES) specified in this profile match those expected by the wireless network.
Verify that the wireless adapter in your computer has not been restricted from accessing the radio channels being used by the wireless network.
If the problem persists, contact your network administrator and provide the troubleshooting information below.
Adapter Details
Adapter name  11a/b/g Wireless LAN Mini PCI Express Adapter
Adapter type  Wireless LAN
Adapter speed  54.0 Mbps
Driver/Firmware version  7.6.0.96/ N/A
Adapter status  Enabled
Connection Status  Disconnected
Disable unused cards?  Yes
TCP/IP Settings
DHCP enabled?  Yes
Append parent suffixes of the primary DNS suffix?  Yes
Register connection's DNS suffix in registration?  Yes
Register connection's DNS suffix in DNS registration?  Yes
Enable LMHOSTS Lookup?  No
NetBIOS setting  "Default"
Wireless Settings
Network name (SSID)  linksys
Connection type  Access point
Wireless mode  Auto
Security encryption  None
System Information
System model  7732CTO
BIOS version  7LETB7WW (2.17 )
Operating system version  Windows Vista, Service pack 2
Access connections version  5.31
Access Point scan list
Network name (SSID)              Wireless mode MAC address                   Signal strength Channel
linksys                          802.11g        00:1C:10:54:65:B6              24%            11
Global Settings
Network
Allow all users of this system to switch to any existing location profile  -> No
Allow the wireless LAN radio to be turned off when inactive  -> No
Allow selection of location profiles with Fn+F5 On Screen Display menu  -> Yes
Enable autodeletion of unused profiles  -> Yes
Notifications
Show ThinkVantage Access Connections status icon in task tray  -> No
Show wireless status icon in task tray  -> No
Display the progress indicator window when a profile is being applied  -> Yes
Preferences
Enable sound effects  -> Yes
Do not show balloon tips from the Access Connections system tray icon  -> Yes
Show WiMAX page as default on Main GUI  -> No
Automatic location profile switching list
Include Ethernet connections in automatic switching and prompt me to save Ethernet ports  -> Yes
When no other connections are available, connect through Wireless WAN or WiMAX  -> No
Wireless priority list
Selection    Priority     Location profile name                                            Connection order                 Connection details
No                  1     linksys                                                          Wireless LAN                     SSID: linksys
Log File
Debug Log is enabled
It didn't happen when I use old version. Can anybody help me?

Are you getting any error message while connecting to ds..?
Are you able to go online on wired computer...?
Are you able to go online on any wireless computer on your network..?
Open the router setup page and under the wireless tab,Change the Channel width to 20MHz only and Channel to 11-2.462GHz and click on save settings...Under the Advanced Wireless Settings...Change the Beacon Interval to 75,Change the Fragmentation Threshold to 2304,Change the RTS Threshold to 2304 and Click on Save Settings...
Now,check.

X220 - Access Connections Wireless issue - Driver disconnected while associating

I am trying to connect to our wireless network at work. I have verified that my settings are correct with the other X220s that we have connecting to our network. When the connections fails and I select "help me fix this" I get four error messages.
Thanks in advance if anybody has any ideas.
Connection status:  Not connected
Cause:  The driver disconnected while associating.
Error code:  229378
Recommended actions:
The selected wireless network is out of range or unavailable. Move to a location that is closer to the access point and try again.
Verify that the encryption settings (WEP/TKIP/AES) specified in this profile match those expected by the wireless network.
Verify that the wireless adapter in your computer has not been restricted from accessing the radio channels being used by the wireless network.
Verify that the wireless network name (SSID) is specified correctly. The SSID is case sensitive.
If the problem persists, contact your network administrator and provide the troubleshooting information below.
Adapter Details
Adapter name  Intel(R) WiFi Link 1000 BGN
Adapter type  Wireless LAN
Adapter speed  54 Mbps
Driver/Firmware version  14.0.1.2/ N/A
Adapter status  Enabled
Connection Status  Not connected
Disable unused cards?  No
TCP/IP Settings
DHCP enabled?  Yes
Append parent suffixes of the primary DNS suffix?  No
Register connection's DNS suffix in registration?  No
Register connection's DNS suffix in DNS registration?  Yes
Enable LMHOSTS Lookup?  No
NetBIOS setting  "Default"
Wireless Settings
Network name (SSID)  Harvest
Connection type  Access point
Wireless mode  Auto
Security encryption  802.1x/WPA2/AES/EAP
Internet Settings
IE Settings
Home page  http://www.fyifdi.com/default.aspx
Proxy settings
Automatically detect settings?  No
Use automatic configuration script?  No
Bypass proxy for local addresses?  No
System Information
System model  42872VU
BIOS version  8DET46WW (1.16 )
Operating system version  Windows 7, Service pack 1
Access connections version  5.85
Access Point scan list
Network name (SSID)              Wireless mode MAC address                   Signal strength Channel
EnGenius1                        802.11g        00:02:6F:6E:C5:6A              23%            1
                                 802.11g        30:37:A6:C8:5B0              48%            11
                                 802.11g        00:23:33:21:9B:80              95%            1
                                 802.11g        00:14:A8:7E:60:40              25%            3
Duket Architects Planners        802.11g        00:21:29:92:57:B9              25%            6
Global Settings
Network
Allow Windows users without administrator privileges to create and apply location profiles  ->No
Allow the wireless LAN radio to be turned off when inactive  -> Yes
Enable autodeletion of unused profiles  -> No
Disable the Peer to Peer community feature  -> Yes
Allow selection of location profiles with Fn+F5 On Screen Display menu  -> Yes
Notifications
Show ThinkVantage Access Connections status icon in task tray  -> No
Show wireless status icon in task tray  -> No
Display the progress indicator window when a profile is being applied  -> Yes
Show Access connections Gauge in task bar  -> Yes
Preferences
Enable sound effects  -> No
Enable animations  -> Yes
Do not show balloon tips from the Access Connections system tray icon  -> Yes
Do not show balloon tips from the Access connections Gauge  -> Yes
Automatic location profile switching list
Include Ethernet connections in automatic switching and prompt me to save Ethernet ports  -> No
Preferred Location Of WLAN  -> No
When no other connections are available, connect through Wireless WAN or WiMAX  -> No
Wireless priority list
Selection    Priority     Location profile name                                            Connection order                 Connection details
Yes                 1     Harvest                                                          Wireless LAN                     SSID: Harvest
Log File
Debug Log is disabled
Solved!
Go to Solution.

I share your pain with same Intel WiFi Link 1000 bgn. After many, many hours yesterday I am now solidly running Wireless N at 144 Mbps on a LinkSys E4200, 99% reception from 30 feet away.
Previous to yesterday I could not get 'N' to work at all.
First, if you have a newer dual frequency Router, this Intel adapter only supports 2.4ghz..
1. I am using Access Connections 5.85, Windows 7
2. Router: 2.4 Ghz Network Mode: Mixed
3. On my LinkSys router Channel: Auto NEVER worked for either 'G' or 'N'. I picked channel 4 by chance and things got better. No further experiments.
3. Channel Width: Auto (20mhz or 40mhz).
4. Earlier forums indicate WPA2-P and AES must be selected. That's what I am running.
5. Numerous references to "power" conflicts. Set all Power Management to Maximum Power.
(Control Panel -> Device Manager ->Network Adapters -> Intel WiFi Link 1000 bgn -> Power Management)
(Access Connections -> Wireless Settings -> 4. Advanced Configuration-> Maximum Performance)
If you followed these steps, Wireless G should be working stabily for you now.
Now for the secret sauce to make Wireless N work: go to http://communities.intel.com/message/82098#82098
See Feb 3, 2010 post How to get 5100 AGN to connect at N speed?
I am indebted to this guy.
Save the instructions! For some reason my EDGE 14 wireless totally quit this week and that's what sent me down this wireless rabbit hole again. At least this time I was able to make N mode work for the first time.
Frustrated but relieved,
Lew

Access Connections icon on the left side instead of the right side on taskbar

As stated in the title of this post the icon of Access Connection 5.72 is on the left side. The only way to have it correctly on the right side is to go to 'Toolbars' on the task bar -> uncheck Access Connections -> apply -> recheck Access Connections -> apply -> ok
Lenovo, please fix this

@kingskawn,
Could you let me know where can I obtain this SCCM software so I may try to replicate this bug?
Also do update the TVAC to the latest version.
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-73682
I understand you are using Update Retriver to download the software but there are some delays in the Update Retriver compared to the Lenovo Support site. Therefore try installing the latest TVAC and then install the SCCM software and see the bug still occur.
//JameZ
Check out the Community Knowledge Base for hints and tips.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
X240 | 8GB RAM | 512GB Samsung SSD

Access Connection Tray Icon disappear

Hi, I got a problem on a T61p model 8889-AB5 owned by my boss. The ThinkVantage Access Connections tray icon was disappeared occasionally. It is noticed that below registry keys were missed and I needed to add them back to get the tray icon displayed.ACTray=C:\\Program Files\\ThinkPad\\ConnectUtilities\\ACTray.exeACWLIcon="C:\\Program Files\\ThinkPad\\ConnectUtilities\\ACWLIcon.exe This T61p hardware was checked by Lenovo service center on July 2008; no problem was found and the Win XPP was reinstalled from recovery CD afterward. Does anyone encounter similar problem? Thanks, Eric

And still no improvements in version 6.11!
Can we expect a fix for this?

I get a no service msg and a USB connected to itunes icon on the home page. How can i get past this so i can access and unlock my phone?

i get a no service msg and a USB connected to itunes icon on the home page. How can i get past this so i can access and unlock my phone?

DFU Mode / Recovery Mode / Unable to Update or Restore
http://support.apple.com/kb/HT1808

Access Connections icon in taskbar

Can someone tell me how to retrieve my wireless icon signal bar in the taskbar. I think I turned off access connections being shown in the taskbar and cannot find how to turn it back on....help!

Open Access Connections, switch to Advanced view and click on the Tools tab.
Click on Global Settings, then the Notifications tab. The settings you want are there.

Access connection icon won't allow shrinking of the Sidebar (thick wide icon)

this one is wierd but I can't get it fixed I just installed new HDD with everything fresh Win 7/64 sp1. This ACCESS CONNECTION (v. 5.97) icon won't allow me to shrink sidebar ,even thou in my old HDD I'm able to shrink it. Whole new install is same as on old HDD. I UNLOCK the side taskbar,remove the access connection,then LOCK the taskbar. Then I add ACCESS CON. and the sidebar widens again. helpppp pls :-) How can I fix that ugly wide icon? :-) seriously, its bad
Solved!
Go to Solution.

...never mind....downgraded Access Connection to 5.93 and could shrink the sidebar.....good example of how newer doesn't always mean better :-)

Hello I have an Iphone 3, but I had a problem with the wifi connection when I want to connect the wifi icon is gray and I can choose to access the wifi

hello
I have an Iphone 3, but I had a problem with the wifi connection when I want to connect the wifi icon is gray and I can choose to access the wifi

Read here:
http://support.apple.com/kb/ts1559
If nothing works, you most likely have a hardware issue.

Loosing T530 AC (Access Connections) + PM (Power Manager) Icons after Sysprep

Lenovo T530 (Windows 7, x64 SP1) Sysprep OOTB generalized
After the Sysprep, the system looses the Icons from the Access Connections (Version 5.85) and the Power Manager (Version 6.32) in the Taskbar. I can get them back, if i'll do a right click at the task bar and choose the AC and PM manually.
Is there a possibility that the symbols retained after the sysprep?
Solved!
Go to Solution.

Probably because the tools aren't added to the taskbar in "Default" user. Did you added the tools to the taskbar in Audit mode?
Though sysprep will not keep some settings. You may need to use `unattended.xml` to configure scripts to add those tools to the taskbar.
Just another question: does the PM tool appears in its factory state?

R51 - Access Connections vs win xp wireless

Hi!
I've been using ThinkPads for years but this is the first time I have posted to the Lenovo forum.
I just installed ThinkVantage Access Connections on my very old R51 (2004 but still going strong!) using the new and improved SystemUpdate. After re-booting I was unable to make the wireless connection to my home network. Strange, as it was working just fine before using the old IBM Access Connection. After muddling around some I tried uninstalling my wireless card and letting win xp do an auto-reinstall after re-booting. Well that did the trick - I can now connect wirelessly to my home network and the internet.
However, Access Connections thinks that my wireless drivers are still improperly installed. My systray wireless icon shows a strong connection but the Access Connection icon indicates I am not connected. I've decided to ignore Access Connections (removed it from my systray) and just let win xp manage my wireless connections. But if there is a way to fix this I would like to go back to using Access Connections. The old version was working just fine in managing my different wireless connection profiles.
Browsing the forums it looks as if a number of others are having similar issues with Access Connections and their wireless network connections. I wonder if Lenovo needs to put out a fix via System update.
ThinkCentre M51 (8143-WNV): Intel Pentium 4 (HT), 4 GB RAM, 40 GB 7200 RPM SATA HDD, PCI Tower (4x5), Intel GMA 900, 48x32x48x16x CD-RW & DVD combo, Broadcom Gigabit Ethernet, Win XP Pro, US Robotics voice/data modem PCI, USB 2.0 PCI card

Hello Aras, welcome to Lenovo Forums!
Please download the newest versions of power manager, hot key driver, wlan, lan driver and Access Connections.
Then uninstall first AC, wlan driver, hotkey driver and power management driver.
Reboot.
Then reinstall, using the following installation sequence:
powerManagement driver
hotkey-driver
wlan-driver
Access Connection.
Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
Please insert your type, model (not S/N) number and used OS in your posts.
I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
English Community Deutsche Community Comunidad en Español

Access Connection Suddenly stopped working...

Hello,
Access Connection application version: 5.42
Build: 6JC725WW
I have a T400 with Win7 64 bit. Everything has been working fine since new, juat about a month. Today for no apparent reason the Access Connection application drops my wireless connection about 1 minute after I turn on the laptop. It shows all green bars as it has since new and works just fine for about a minute then the screen blinks, goes black for a fraction of a second then comes back with the green bars all grfay and a red circle and line on top of the wireless icon. The task bar as the bottom of the screen also turns light gray.
The Access Connections application shows no available wireless networks where before there were at least a dozen from around my neighborhood.
Here's the strange part, about 3 minutes later after this happens the laptop screen blinks again, the light gray task bar turns back to normal and I get a wireless connection via "Windows Wireless Service". The other strange thing is the connection name is the same as my location profile but with a "2" after it. It was "Indy" and now in the OS wireless configuration it shows the connection as "Indy 2".
Anyone know what might be going on here? I'm pulling my hair out trying to figoure out why the Access Connection application has stopped working correctly.
One other thing, the wireless connection is working as I'm submitting this post on the machine in question. What's odd is when I do an FN F5 to turn the wireless "on" or "off" the window that appears clearly shows that the radio is "off". Attempts to turn it on only close the window but doing an FN F5 again clearly shows it is still off. How could it be off if I'm able to browse the internet and see my home network?
There seems to be a problem with this ThinkVantage Access Connection application. Can I uninstall it? I'm not really a big fan of running software that "sort-of" works and it appears this app is buggy.
Thanks,
Bob

Hi!
Because the AP WAP200 are powered with POE, all clients may losts connection at the same time only for an electrical failure on the SF302 switch. Check your hardware and ensure that the power supply is working properly. Check also the connection cable to the power line and to the switch
Regards

I'm having strange random connection failures. Are there ineffieciency in my config?

I've been having strange, random connection failures and I'm trying to eliminate possible causes.
What happens is while I'm browsing on the net over wifi, a link will at random not connect to the site, but instead fault to the ISP error page. It happens with highly reliable sites like google, or ebay, or whatever. If I direct connect to the cable modem, the problem site is immediately available.
I'm sitting <6 feet from a 871W router (with antenna). There's one router in my building and others are at my neighbors.
Below is the conf file. Just to imagine how rediculious this problem is, here's a screen shot from a web page. This shows a web page I visited, and after clicking on a link (an embedded youtube video), the error showed up within the page itself.
Why would only some URLs fail to connect? Is there inefficiencies in my config?
    Building configuration...
    Current configuration : 4750 bytes
    version 12.4
    no service pad
    service timestamps debug datetime msec
    service timestamps log datetime msec
    no service password-encryption
    hostname TooterTurtle
    boot-start-marker
    boot-end-marker
    logging buffered 51200 warnings
    no logging console
    aaa new-model
    aaa authentication login default local
    aaa authorization exec default local
    aaa session-id common
    clock timezone NewYork -5
    clock summer-time NewYork date Apr 6 2003 2:00 Oct 26 2003 2:00
    dot11 syslog
    dot11 ssid TooterTurtle
       vlan 2
       authentication open
       authentication key-management wpa
       guest-mode
       wpa-psk ascii 0 [my wifi password]
    no ip source-route
    no ip gratuitous-arps
    ip cef
    no ip dhcp use vrf connected
    ip dhcp excluded-address 192.168.10.1 192.168.10.10
    ip dhcp excluded-address 10.0.0.1 10.0.0.10
    ip dhcp pool vlan1
       import all
       network 192.168.10.0 255.255.255.0
       dns-server 192.168.10.1
       default-router 192.168.10.1
       domain-name Ethernet
    ip dhcp pool vlan2
       import all
       network 10.0.0.0 255.255.255.0
       domain-name WiFi
       dns-server 10.0.0.1
       default-router 10.0.0.1
    ip dhcp pool MrWizard
       host 192.168.10.100 255.255.255.0
       hardware-address 0011.0917.66fa
       client-name MrWizard
    ip dhcp pool MasterShake
       host 192.168.10.101 255.255.255.0
       hardware-address 0022.681c.fbcc
       client-name mastershake
    ip auth-proxy max-nodata-conns 3
    ip admission max-nodata-conns 3
    no ip bootp server
    ip domain name mydomain.com
    ip ddns update method ccp_ddns1
     HTTP
      add [zone edit account and url]
      remove [zone edit account and url]
    username admin privilege 15 secret 5 [encrypted secret]
    archive
     log config
      hidekeys
    no ip ftp passive
    ip ssh version 1
    bridge irb
    interface FastEthernet0
     description AdminInterface
    interface FastEthernet1
     description MrWizard
    interface FastEthernet2
     description Belkin
    interface FastEthernet3
    interface FastEthernet4
     description ComcastCableModem
     ip address dhcp
     ip verify unicast source reachable-via rx allow-default 100
     no ip redirects
     no ip unreachables
     no ip proxy-arp
     ip nat outside
     ip virtual-reassembly
     speed auto
     full-duplex
    interface Dot11Radio0
     no ip address
     no ip redirects
     no ip unreachables
     no ip proxy-arp
     encryption vlan 1 mode ciphers tkip
     encryption vlan 2 mode ciphers tkip
     ssid TooterTurtle
     speed basic-1.0 basic-2.0 basic-5.5 basic-6.0 basic-9.0 basic-11.0 basic-12.0 basic-18.0 basic-24.0 basic-36.0 basic-48.0 basic-54.0
     station-role root
    interface Dot11Radio0.1
     description TootersWiFi
     encapsulation dot1Q 2
     no cdp enable
     bridge-group 2
     bridge-group 2 subscriber-loop-control
     bridge-group 2 spanning-disabled
     bridge-group 2 block-unknown-source
     no bridge-group 2 source-learning
     no bridge-group 2 unicast-flooding
    interface Vlan1
     description EthernetOnly
     no ip address
     no ip redirects
     no ip unreachables
     no ip proxy-arp
     ip nat inside
     ip virtual-reassembly
     bridge-group 1
    interface Vlan2
     description WiFiOnly
     no ip address
     bridge-group 2
    interface BVI1
     description EthernetOnly
     ip address 192.168.10.1 255.255.255.0
     ip nat inside
     ip virtual-reassembly
    interface BVI2
     description WiFiOnly
     ip address 10.0.0.1 255.255.255.0
     ip nat inside
     ip virtual-reassembly
    ip forward-protocol nd
    ip route 0.0.0.0 0.0.0.0 FastEthernet4
    ip http server
    ip http authentication local
    no ip http secure-server
    ip http timeout-policy idle 60 life 86400 requests 10000
    ip dns server
    ip nat inside source list 101 interface FastEthernet4 overload
    ip nat inside source list 102 interface FastEthernet4 overload
    ip nat inside source static tcp 192.168.10.100 80 interface FastEthernet4 80
    ip access-list extended vlan1
     deny   ip 10.0.0.0 0.0.0.255 any
     permit ip any any
    access-list 100 permit udp any any eq bootpc
    access-list 101 permit ip 192.168.10.0 0.0.0.255 any
    access-list 102 permit ip 10.0.0.0 0.0.0.255 any
    no cdp run
    control-plane
    bridge 1 protocol ieee
    bridge 1 route ip
    bridge 2 protocol ieee
    bridge 2 route ip
    line con 0
     no modem enable
    line aux 0
    line vty 0 4
     transport input telnet ssh
     transport output telnet ssh
    scheduler max-task-time 5000
    end

I removed the ip router 0 0 to no great effect, which I consider to be a win.
I'm guessing that since overload is what--I understand--translates the one outside to the many inside IPs, that the suggestion to have only one overload configured means I should combine the two ip ranges into one.
I deleted 10.0.0.0 network. Changed the bridge references to 1 and vlan references to 1. Now wifi and ethernet should all be using the same internal network? That's the idea, right? Any more fat?
[EDITED]
dot11 syslog
dot11 ssid TooterTurtle
   vlan 1
   authentication open
   authentication key-management wpa
   guest-mode
   wpa-psk ascii 0 [my passphrase]
no ip source-route
no ip gratuitous-arps
ip cef
no ip dhcp use vrf connected
ip dhcp excluded-address 192.168.10.1 192.168.10.10
ip dhcp pool vlan1
   import all
   network 192.168.10.0 255.255.255.0
   dns-server 192.168.10.1
   default-router 192.168.10.1
   domain-name Ethernet
ip auth-proxy max-nodata-conns 3
ip admission max-nodata-conns 3
no ip bootp server
ip domain name [my url]
ip ddns update method ccp_ddns1
HTTP
add http:...[zoneedit]
remove http:[zoneedit]
no ip ftp passive
ip ssh version 1
bridge irb
interface FastEthernet0
description AdminInterface
interface FastEthernet1
description MrWizard
interface FastEthernet2
description Belkin
interface FastEthernet3
interface FastEthernet4
description ComcastCableModem
ip address dhcp
ip verify unicast source reachable-via rx allow-default 100
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat outside
ip virtual-reassembly
speed auto
full-duplex
interface Dot11Radio0
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
encryption vlan 1 mode ciphers tkip
ssid TooterTurtle
speed basic-1.0 basic-2.0 basic-5.5 basic-6.0 basic-9.0 basic-11.0 basic-12.0 basic-18.0 basic-24.0 basic-36.0 basic-48.0 basic-54.0
station-role root
interface Dot11Radio0.1
description TootersWiFi
encapsulation dot1Q 2
no cdp enable
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 spanning-disabled
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
interface Vlan1
description EthernetOnly
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat inside
ip virtual-reassembly
bridge-group 1
interface BVI1
description EthernetOnly
ip address 192.168.10.1 255.255.255.0
ip nat inside
ip virtual-reassembly
ip forward-protocol nd
ip http server
ip http authentication local
no ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
ip dns server
ip nat inside source list 101 interface FastEthernet4 overload
ip nat inside source static tcp 192.168.10.100 80 interface FastEthernet4 80
ip access-list extended vlan1
permit ip any any
access-list 100 permit udp any any eq bootpc
access-list 101 permit ip 192.168.10.0 0.0.0.255 any
no cdp run
control-plane
bridge 1 protocol ieee
bridge 1 route ip

Access Connections issues w L512

I have a Lenovo L512 - 444CTO, running Windows 7, i5 processor, 4gb ram, 500gb hd
it has the adapter 11b/g/n wireless LAN mini-PCI express Adapter II
both at my home and at my office, both of which have wireless internet, it will log on initially and get good signal and work, but within ~10 minutes of being on the internet, it for no reason stops working. The Access Connections menu says that it is still connected with strong signal. But the small "network" icon in the bottom right shows the yellow-triangle exclamation point, and says "no internet access," despite the fact that all other computers at both the home and office continue to work without interruption.
it is not a problem with the networks, as multiple other computers on the same network in both places work without interruption.
this laptop was purchased because i have online live synchronous classes this spring for my Graduate program, and I need to be able to get online and stay online to participate in them.
Any ideas as to why this might be happening or possible solutions would be greatly appreciated.
there is no firewall on either of the wireless providers that I use, and i have checked that the wireless radio is turned on. the troubleshooting for the network icon tells me it finds nothing it can do.
Solved!
Go to Solution.

Hello mate,
It's possible that you need to deselect the option "Allow the wireless LAN radio to be turned off when inactive" found under Global settings.
Launch Access Connections>Tools>Global Settings. Deselect it and see if that fixes your problem.
Knowledge is of two kinds. We know a subject ourselves, or we know where we can find information on it.
ThinkPad T510 4313-CTO Windows 8 x64 - Intel Core i7-620M - NVIDIA NVS 3100M - 8GB RAM - 240GB SSD- Intel Centrino Ultimate-N 6300 - Gobi 2000.
ThinkPad Helix 3697-CTO Windows 8.1 x64 - Intel Core i7-3667U - Intel HD Graphics 4000 - 8GB RAM- 256GB SSD - Intel Centrino Advanced-N 6205 - Ericsson C5621gw

Strange Access Connection​s toolbar icon

Similar Messages

Maybe you are looking for

Strange Access Connections toolbar icon