Strange email effect...help?

Can someone tell me why if I scroll down to the bottom of a long email message, then simply move to the next [long] email message (without scrolling back to the top of the message), I find myself far down the next message's body rather than at the start? Or, if not why this happens, can anyone tell me a fix to this little annoyance?
Thanks

A workaround is to display messages in their own individual windows rather than at the bottom of the Message Viewer window. (To close the message "pane" at the bottom of the M.V. window, either drag the divider bar with the dot all the way to the bottom or double-click on it. Then double-click on a message in the M.V. list to open it in its own window.)
Alternately, you can open more than one M.V. window at a time, & achieve much the same effect.
Personally, I like the message-in-its-own-window option much better than seeing them squeezed into the M.V. list, I guess because so few of the messages I get are short enough to fit into the M.V. pane. It would be perfect for me if the message windows had "next" & "previous" buttons ... maybe that will appear in the next version....

Similar Messages

  • E72 - strange email issue - help required

    Started having a strange problem with my email today. On all accounts set up (hotmail, googlemail, ovi) but not on mail for exchange, my inboxes are emptying themselves completely so that there are no messages in the inbox and then re-populating themselves with all messages, then emptying again and so on. It is happening in a continuous cycle. Emails are all there, then one by one deleted before my eyes, the back again one by one, and then they go etc.. 
    Haven't seen this problem mentioned before. Anyone have any ideas? It's been working fine for over a month until today.

    Thanks hadimassa. Been looking here and on the the messaging board, but can't see any of those threads discussing this. Can you point me in the direction of one please. Any solutions posted anywhere? Tempted to try and delete my email accounts from nokia messaging and then re-add them to see if that helps, but don't know if that will open a whole new can of worms. It's literally happening on a 5 minute cycle, which is just eating up data and battery, so need to try and solve pretty urgently.

  • Strange "strobe" effect when doing slow motion

    hi
    after using fcp for a year now, i strangly encountered a problem in a video i need to deliver in 2 days.
    whenever i did a 50% slow motion i get a strange "strobe" effect. when the frame is more or less static then you wont be able to see it but when the camera pans or the object in the frame moves it is very disturbing.
    this is only noticable when viewed on a tv set, not on my display.
    i thought it was in the encoding so i did the whole "export using QT" again, this time making sure its 2 pass VBR 6.8 to 8 mbps. still there.
    i am working on a Pal system without a monitor so i burned the video onto a dvd using dvdsp (as usual) and then played it in a pal dvd player and tv but this strobe thing is still there.
    b.t.w the interlace option on the "export using QT" was set as auto, the same as always.
    i didnt do anything different this time but still i get that problem. what could it be ? all the settings in fcp settings are set to 100% quality and the video is fully rendered.
    i appriciate your comments and help.
    thanx
    nir evron

    hi jim and thanx for the quick reply...
    i used to do my slo-mo in fcp without any problems till today.
    b.t.w - im editing DV PAL.
    i dont have motion so i'm stuck to fcp.
    any suggestions ?
    thanx
    nir

  • Strange email addresses during setup

    Hi all,
    Have a question that has stumped both Apple and Verizon representatives. I received my iPhone 6 plus today, and at a point during setup it asks me for my iCloud ID and password. After accepting that, it takes me to the screen asking which backup to use. After selecting the most recent (or any for that matter) it took me to a screen asking for the password associated to a completely random and strange e-mail address I have never seen. The Apple repeesentative finally told me to skip this step. I agreed, and when taken to the next step it again asked me for the password to the email address associated with purchases except it was a different strange email. I once more skipped, only to see another e-mail that I have no knowledge on and do not know anyone associated with it. Both Apple suggestions do not appear to be viable, as I never back up or sync from other computers and I haven't added any other emails to my account. I toyed with the idea that maybe I had received a floor model, but I don't think that's the case as it arrived in the original, plastic wrapped package. I realize this was long-winded, just wondering if anyone had any ideas on the cause. I searched and didn't find anything remotely related, which makes this even stranger. thanks in advance to anyone who might have a suggestion.
    MIke

    If you are on WiFi only then it should not cost anything...BB10 devices are capable of all data-level services via WiFi only. However, what is not controllable is what actually happens when you are traveling. For example, if you leave your Mobile Network running for roaming voice services, then there is of course some possibility that something will traverse that network instead of the WiFi network (out of range, for example). But, of you are really concerned, one way to be certain would be to keep all Data Services off while you are strictly in voice mode (e.g., not near any WiFi). When you are on WiFi, turn your Mobile Network services off and turn on Data Services. That way, you can be sure that no data services will ever traverse the Mobile Network.
    However, that may be overkill...but there is no way for us to know what your carrier nor the carrier on which you are roaming might or might not do.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Strange Side Effects

    Hi,
    I recently re-organized my Flex projects. I took them out of
    the Flex Builder 3 default folder and put them in an easier
    location. However when I did this I experienced some strange side
    effects. First of all, the ContentAssist does not seem to work
    anymore, and I've tried for several different projects. Also, the
    'Outline' view displays a '!' for root and doesn't display any
    other nodes.
    Also, what seemed stranger is that some code had to be
    tweaked to work again that was working fine before the switch.
    Because there was an old copy of a Site and a new copy, it seemed
    like the 2 merged and so some code was old and some was new.
    So basically I am curious whether there might be some config
    files or something that was altered negatively in the move. I tried
    cleaning all of the projects without any luck.
    Thanks in advance,
    Jesse

    "released87" <[email protected]> wrote in
    message
    news:gqg2vh$5mc$[email protected]..
    > Hi,
    >
    > I recently re-organized my Flex projects. I took them
    out of the Flex
    > Builder
    > 3 default folder and put them in an easier location.
    However when I did
    > this I
    > experienced some strange side effects. First of all, the
    ContentAssist
    > does not
    > seem to work anymore, and I've tried for several
    different projects. Also,
    > the
    > 'Outline' view displays a '!' for root and doesn't
    display any other
    > nodes.
    >
    > Also, what seemed stranger is that some code had to be
    tweaked to work
    > again
    > that was working fine before the switch. Because there
    was an old copy of
    > a
    > Site and a new copy, it seemed like the 2 merged and so
    some code was old
    > and
    > some was new.
    >
    > So basically I am curious whether there might be some
    config files or
    > something that was altered negatively in the move. I
    tried cleaning all of
    > the
    > projects without any luck.
    Did you create a workspace in the new location? I have about
    5 work spaces
    in different locations, and I don't have any of these
    problems. Also, did
    you import the projects into your new workspace?

  • Why am I suddenly getting a strange banding effect when printing.

    I've been using Adobe Photoshop CS5 for the last two years and I've started getting a strange banding effect on my prints.  Photoshop seems to be the only application that is effected.  I print on a large format printer, my drivers are up to date, if I print a smaller size and fit to page (test print) the print is ok.  When I print to full size I start having the problem. 

    However, when something starts acting weird suddenly, that is usually a sign to re-set your Photoshop preferences.
    Preferences files vary by name and location for each version of Photoshop.
    To re-create the preferences files for Photoshop, start the application while holding down Ctrl+Alt+Shift (Windows) or Command+Option+Shift (Mac OS). Then, click Yes to the message, "Delete the Adobe Photoshop Settings file?"
    Mac OS
    Important: Apple made the user library folder hidden by default with the release of Mac OS X 10.7. If you need access to files in the hidden library folder to perform Adobe-related troubleshooting, see How to access hidden user library files.

  • Strange email problem; it started only loading unread emails, but from 3 months ago. It is now loading new emails too, but no emails in the past month, read or unread. It's gmail, set up through the phone, I've restarted restored

    Strange email problem; it started only loading unread emails, but from 3 months ago. It is now loading new emails too, but no emails in the past month, read or unread. It's gmail, set up through the phone, I've restarted restored and updated firmware, deleted the account, anything I could think of, but it's just not accurately downloading the most recent emails.

    The answer is very simple: You were not the original owner of the phone. Target sold you a phone that had been returned. You can verify the date of the original sale here: Apple - Support - Check Your Service and Support Coverage. I suspect you will find that the warranty expiration date is not one year from the date that you bought it.

  • Hi, I recently got the iPhone 6, a bit of mucking around with iMessage, over it to be honest. When i message from my macbook air my recipients receive my message from my email. HELP! it never used to do this. its so annoyingly frustrating.

    Hi, I recently got the iPhone 6, a bit of mucking around with iMessage, over it to be honest. When i message from my macbook air my recipients receive my message from my email. HELP! it never used to do this. its so annoyingly frustrating.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem(s)?
    After testing, reboot as usual (i.e., not in safe mode.)

  • After effects help & adobe air

    i'm in the after effects cs5 application (creative suite production premium) on a power mac 10.5.8 and when i go to the help pull down and click on after effects help, i get the following error message:
    don't even know what abobe air is. i'm assuming the after effects help has to run through this app. is this something i need to install and what does it do? i hate hate running unnecessary programs. thanks.

    You can use After Effects Help without using the AIR application. You can either use the HTML version of After Effects Help on the Web or the  PDF version of After Effects Help.
    For information on how to fix this problem with the AIR application, see the Community Help Client forum.

  • I forgot my apple password  and i forgot the security q , and i think somebody hacks my email . please help

    i forgot my apple password  and i forgot the security q , and i think somebody hacks my email . please help!!!
    this is it ([email protected])

    Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
    A
    1. iOS- Forgotten passcode or device disabled after entering wrong passcode
    2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    3. Restoring iPod touch after forgotten passcode
    4. What to Do If You've Forgotten Your iPhone's Passcode
    5. iOS- Understanding passcodes
    6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    7. iOS - Unable to update or restore
    Forgotten Restrictions Passcode Help
                iPad,iPod,iPod Touch Recovery Mode
    You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
    You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
    Also, see iTunes- Restoring iOS software.
    Alternatives for Help Resetting Security Questions and Rescue Mail
         1. Apple ID- All about Apple ID security questions.
         2. Rescue email address and how to reset Apple ID security questions
         3. Apple ID- Contacting Apple for help with Apple ID account security.
         4. Fill out and submit this form. Select the topic, Account Security.
         5.  Call Apple Customer Service: Contacting Apple for support in your
              country and ask to speak to Account Security.
    How to Manage your Apple ID: Manage My Apple ID

  • Please rate the After Effects Help pages you find useful

    You may have noticed that Adobe employees and Community Experts hanging in this forum keep pointing users to the relevant sections in After Effects Help on the Web. The reason for this is, of course, that the quality of explanations, visual examples, video tutorials and other materials in those pages is much higher than what anyone could quickly type in a forum reply. Personally, I think AE help has experienced a drastic overhaul in the last few years, to become a great, community-driven, user-focused resource.
    if you find these pages helpful, you can in return help the documentation team by stating which pages you find useful by using the buttons at the bottom of each page.

    You should also leave comments to tell us what other information you'd like to see... or to leave a tip, link, or technique of your own.
    After Effects CS4 Help

  • I need to replace the nano SIM card tray of my brand new Ipad Air, but here in Brazil it has been impossible...How can I contact the US apple store through email to help me?

    I need to replace the nano card SIM  TRAY of my brand new IPad air, but here in Brazil it has been impossible...How can I contact the US apple support through email, to help me?

    Visit an ASP or dealer

  • This is detailed: I lost my touch pad scroll ability on my desktop when I installed Firefox, I am having a terrible time trying to sync my new Android tablet to my desktop, my desktop Firefox is acting very strangly (I need help trying to use it)

    My Vista Home Premium desktop has not used Firefox for a long time. I just loaded it as well as on my Honeycomb Android. The statement that I made pretty much says what my problem is. I can use both of them at the same time and use a router with the air Verizon card installed.
    I'll repeat my question: This is detailed: I lost my touch pad scroll ability on my desktop when I installed Firefox, I am having a terrible time trying to sync my new Android tablet to my desktop, my desktop Firefox is acting very strangely (I need help trying to use it)

    My Vista Home Premium desktop has not used Firefox for a long time. I just loaded it as well as on my Honeycomb Android. The statement that I made pretty much says what my problem is. I can use both of them at the same time and use a router with the air Verizon card installed.
    I'll repeat my question: This is detailed: I lost my touch pad scroll ability on my desktop when I installed Firefox, I am having a terrible time trying to sync my new Android tablet to my desktop, my desktop Firefox is acting very strangely (I need help trying to use it)

  • Strange email address while restoring from iCloud!

    Hey
    I am restoring my data from iCloud to my new iPhone 5S but while I am restoring they tell me to enter the password for emails idk and when I click cancel they show me another email address until I reach to mine.
    what's happening? and why I am seeing like 4-5 emails adresses before I reach mine?
    Thanks!

    Thanks for ur reply
    My problem is when I am restoring from iCloud and when they ask me to enter my password they ask me to enter the password for email I don't know and when I click skip I see another strange email until I reach to my email and enter my password to start syncing my data from iCloud. So I mean that why they are showing me strange emails addresses that I don't know and I have to write their password so from where did that email address come?

  • HT201363 I have requested the email to help me with forgotten security questions several times over many days but I do not get the email; now I cannot use my account without knowing the security question answers?

    I have repeatedly requested the email to help with forgotten security question passwords but never receive it; I cannot access my account for purchases with out the answers; how can i fix this?

    Hello Jamped,
    It sounds like you are doing the correct process to reset your security questions, but you are not getting the email at your recovery address. I recommend checking your spam folder first. If it is not there I would next reach out to
    our iTunes Account Security team who may be able to help if you can verify your account info:
    Apple ID: Contacting Apple for help with Apple ID account security
    http://support.apple.com/kb/HT5699
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

Maybe you are looking for

  • Using explain plan

    Hi, I am quite new to use explain plan in oracle. I want to know what are the important factors that we should emphasize to optimize a SQL query. Thanks in Advance, Dilip

  • Table used in procedure

    is it possible to know the table A used in Some procedure

  • MFT-5031_Error occurred while reading metadata of file

    Am facing the error below while using OMFT to transfer files to a remote FTP server. Error occurred while reading metadata of file. Action Check the adapter properties and try again. If the problem persists, contact Oracle Support Services. Error Des

  • Profit Center default

    Hi, Present setting in the system Profit center 100 updated in material master record MM01. Price difference account in obyc PRD updated with 30000 against valuation class In 3KEH against GL 30000 - profit center 200 is defined In 3KEI against GL 300

  • MacBook OSX 10.5.5 shuts down after 30 minutes of inactivity

    If I leave my MacBook unattended, it shuts down after exactly 30 minutes. It asks me if I'm sure I want to Logout. This also happens when I've got iTunes running and listening to music but away from my computer for the 30 minutes. I've tried changing