Suitable JVM not found

hi,
i was trying to install "Sun Java[tm] Studio Standard 5 update 1" when an error occured:
"a suitable JVM could not be found". i have JDK5.0 and JRE1.5.1.0_02. i tried to poiint to the <JAVA HOME DIR> but it doesn't work. what shall i do?
thanx.

Have you tried manually installing the JRE version supported by the exact version of P6 you are running?
For P6v7 I believe it should be 1.6 Update 14
http://www.oracle.com/technetwork/java/archive-139210.html

Similar Messages

CNA 6 InstallShield Wizard will not install with a JVM not found message

I ran CNA 5.5 up until last week when Java 7 71 update hit. When I tried to launch, I received JVM Not Found, that was all. So I figured it was time to install CNA 6, however during the install process I now get a pop up box stating InstallShield Wizard will not install with a JVM not found message. No other error messages, no logs, and the installation ceases. Tried installing CNA 5.8.9.1, and CNA 5.5 again, all stop at the same point with the same message. Anyone else see this issue?

When you start Network Assistant, Java determines whether the resources it needs are available. If they are not, Java displays the message Could not create Java Virtual machine, and the session ends. To overcome this problem, open the file C:\Program Files\Cisco Systems\CiscoSMB\Cisco Network Assistant\startup\startup.properties (the default installation path), and modify this entry:
JVM_MAXIMUM_HEAP=1024m
Replace 1024m with a lower setting that does not exceed the available RAM. There is no way to foresee what value will work. Try 512m , and lower it further if necessary. You can use the dial peer tag range 2500 to 2999 out-of-band to define your own dial peers.
If the Network Assistant InstallShield wizard fails to start, it is likely that the temporary folder location defined through the environment variables TMP and TEMP has some problem. Assigning a correct temporary folder location can fix such problems.
Source: http://www.cisco.com/c/en/us/td/docs/net_mgmt/cisco_network_assistant/version6/relnotes/ol32368.html#pgfId-840748

Jvm not found while installing netbeans

Hi All
I installed jdk1.5 in window XP. and run a symple program(success).
And then i tried to install Netbeans 5.0 or any other version,
I am getting error that JVM not Found.
Kindly help me , what I am missing.
thanks

The release date has slipped. We've found some issues which must be fixed before we can release on Windows. Hopefully we will have it soon.
I understand that there is a high level of anticipation. I appreciate everyone's patience.
Thanks,
Ashesh Parekh
Oracle9iAS Product Management.

I am getting a JVM not found error when i try to install tune transfer

this is what i am getting when after i install the program tune transfer...i updated my java and i am still getting the message....any thign would help thank you
(Apr 6, 2007 10:25:07 PM), Install, com.installshield.product.service.product.PureJavaProductServiceImpl$Installer, err, ProductException: (error code = 601; message="JVM not found")
STACK_TRACE: 8
ProductException: (error code = 601; message="JVM not found")
at com.installshield.product.actions.JVMResolution.install(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallPro duct.checkUninstallerJVMResolution(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallPro duct.install(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer. execute(Unknown Source)
at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
at java.lang.Thread.run(Thread.java:613)

> i updated my java ... message="JVM not found"
Open System Profiler and click on Frameworks
The list of Java items and versions should look like this

"jvm not found" on tunes transfer install----PLEASE HELP

hey all! very new to mac ownership (been using my new pro for only a few hours now!) and im trying to install tunes transfer to get all my jams from my pod to my new machine, but i keep getting the "jvm not found" error. how can i correct this?? im not very technical so if anybody could explain this to me in the simplest way possible i would greatly appreciate it! thanks in advance!
-John

The only Tunes Transfer I can find is a Windows app, but assuming you've found a Mac version somewhere...
The error means it can't find your installation of Java. My first guess would be that TT is looking for an older version of Java than the one that's installed on MacOS X these days.
Since moving music from iPods back to computers is not supported by Apple, I won't recommend any alternative applications by name. But you might try googling for iTunes spelled backwards

JVM not found when trying to install NetBeans

Hi all,
I'm a new SUN Certified Java Programmer and I would like to use NetBeans IDE. j2sdk1.4.1_01 seems to be correctly installed on my system (Windows XP Home Edition) (I can see the little Java animation on the download section of this site) and when I run the NetBeans installer I got a message that says "no corresponding JVM found" :'(
My Java teacher has told me to create a JAVA_HOME variable in the system environnement variables and to give it the value "D:\j2sdk1.4.1_01" (Windows XP and sdk are installed on D:\). I've done it but... nothing!
Does anyone have a little idea on how to solve this problem???
Thanks
JadB

Actually, I think the phrase "No JVM found" means the JRE environment has not been setup properly. Most suspicious point is that Tomcat 4/5 doesn't recognise the location of JRE on some Windows platforms. Default location of JRE is C:\program files\java\... and you should notice that there is space in the path which may not be acceptable by some install wizards. You are recommended download a separated copy of JRE and install it on a recognised path, such as C:\J2RE\ . Remember, you should uninstall the previous copy of JRE cobundled with J2SE package before taking any action.

Help! suitable marker not found

Hello- I get an error that says "Suitable marker can not be found in the required layer". I'm using DVDSP 4, creating a dual layer dvd, set my break point as Automatic, and building my project as an .img. I have 5 separate tracks in the dvd. Any help?

Hi pnicolas,
Welcome aboard.
Suitable marker is in fact a place for the layer break. Unforunatly DVDSP at this stage doesn't offer you places where a marker could be placed.
The manual has some detail on approximating how to locate this position. But it does require you placing a marker in that position. And in this case you don't have a chapter marker in an eligible position.
If you are not so sure on the technique. Then you can estimate where you think the half way point in the project is either via a bit budget or using half way point of all your tracks etc. And then placing a liberal dose of markers in the area and do a test build to see if you get past your dialogue box.
Cheers

JWSDP Install Error - No suitable JVM found!

Hi there,
I am trying to install JWSDP on my machine. I do have jdk1.3.1_08 installed on my machine. However, when I try to install the downloaded exe for webservices in DOS prompt, it runs a series of check for the JVM
and finally comes up with the message that no suitable JVM was found.
I tried the -is:javahome <JAVA_HOME_DIR> option too.
Still the same msg.
Should I have jdk1.4X installed?
What am i missign here????
Thanks

Never mind. Fixed it.
Incase someone is interested - installed jdk1.4.2.
The next issue that I had was with ant build NoClassDefFound.
For this, added some of the ant.jar, optional.jar, xerces.jar etc., to
the classpath AND edited ant.bat file to remove double quotes around the parameters in runAnt section.....now it has built successfully...on to the next step now..

Driver class not found?

I'm using Java SE 6 and NetBeans 5.5, and I'm trying to connect to a JavaDB database that I created through NetBeans, but when I try to load the driver using Class.forName("org.apache.derby.jdbc.EmbeddedDriver") I get a ClassNotFoundException. The same thing happens when I try to use ClientDriver instead of EmbeddedDriver. And, when I right-click that driver in the Runtime pane and select Connect Using. . . I get the same error ("suitable driver not found"). Maybe I'm missing something extremely obvious, but I can't for the life of me figure out what it is. I've scoured all of the tutorials I can find on Sun's website, gone through various books on Java and databases, uninstalled and reinstalled all of my Java-related software, even tried different syntax, but I still can't get it to work.
Any thoughts? I'm sorry in advance if this is a dumb question or it's already been answered, but I've been wracking my brain on this for a couple days now and it's starting to drive me a little crazy. . .

The class needs to be in your RUNTIME classpath so that the class loader can find it. I emphasized runtime because this important point seems to miss some people.
At any rate, your drivers are not in your runtimer classpath. Hence the error message.

Sun One on Win2k "Suitable JVM could not be found"

Installing SunOneStudio 4 CE, I get the error message:
A suitable JVM could not be found. Please run the installer again using the option -is:javahome <Java Home Dir>
Question: what directory do they want? the j2SDK? the JVM? where is the JVM?
I tried pointing it to the j2SDK140 directory, but to no avail.

open up dos prompt, type in the program path of ffj with -is:javahome C:\pathToYourJSDK
ex:
C:\>ffj_ce_win32 -is:javahome C:\j2sdk1.4.1
mpatel

Netbeans says "A suitable JVM could not be found", where to get one?

Hi,
I am trying to install Netbeans 4.1 on WinXP, and whenever I try, I get an error saying that a suitable JVM could not be found. Where can I get a suitable JVM? I scoured the site, but couldnt find anything to indicate where to download a JVM.
Meldra

hey sup i had that same error abotu the suitable JVM. i went to that site you linked to and i download the link under NETBEANS but when i install that theres a part that tell you to find the NETBEANS directory. but i need that to have NETBEANS so there should be a NETBEANS directory. So... what can i do now...

A suitable JVM could not be found?

I installed 1.4.1_02 and then I tried install Studio (ffj_ce_win32.exe) and all I get is this error that says : A suitable JVM could not be found. Please run the install again using the option -is:javahome <JAVA HOME DIR>. I tried that too, but I still get the same error. What do I need to do now?
Thanks

Hi,
have a look at this post:
http://forum.java.sun.com/thread.jsp?forum=54&thread=379829
I think your problem might be covered there
-- HSC --

Classes not found on jvm 1.3 and 1.4

Hi,
I have java programs and when running and I traced with truss appear the following:
stat64("/program/java/text/resources/DateFormatZoneData_es_ES.class", 0xF3680778) Err#2 ENOENT
stat64("/program/java/text/resources/DateFormatZoneData_es_ES.properties", 0xF36802E8) Err#2 ENOENT
("/program/java/text/resources/DateFormatZoneData_en_US.class", 0xF36802E8) Err#2 ENOENT
("/program/java/text/resources/DateFormatZoneData_en_US.properties", 0xF36802E8) Err#2 ENOENT
Why not found this classes? Its a bug?
The jar of jvm includes the classes DateFormatZoneData_es and DateFormatZoneData_en, but DateFormatZoneData_es_ES and DateFormatZoneData_en_US not found.
The jvm by default running java programs with en US
If I running the java with the options:
-Duser.language=en -Duser.region=
then the jvm not prove to find nothing class.
Where I find those classes? In which jar?
Help!
Thanks,
Jorge

Hi [email protected],
Please let us know the product, you need assistance with.
Regards,
Anit Kumar

JBO:33001 bc4j.xcfg file not found in class path

Hi,
I am yet another victim of the age-old error JBO:33001 bc4j.xcfg file not found in class path, When i have my BC4JApp.jar in Tomcat Web-inf/lib directory. All the other jar files and class files in my webserver-application web-inf classes and lib directory works.
But Tomcat server is not able to read this bc4j.xcfg file. I can see in my jar file that this bc4j.xcfg exists and in the specified package directory. still the problem persists. My BC4JApp.jar is perfectly working when i use JDeveloper. but not when i use tomcat4.0 and call a JSP using BC4JApp.jar from browser (My environment is Jdeveloper3.2, Tomcat4.0+IIS in middle tier and oracle 8i as DB, everything on windows2k)
I have gone through almost all the threads possible that relates to this error in this form. None of them have a answer except to say "put the file in classpath". and last reply is "will fix in jDeveloper 9i. So what happens to us who are working in Jdeveloper 3.2?
1. I have this file in my jar file.
2. I also tried creating a seperate directory manually, with the same name as my package under web-inf/classes, web-inf/lib , just under web-inf directory and atlast under approot directory also. I tried having my package directory containing bc4j.xcfg in these folders one at a time and also tried having this directory in all these folders at the same time.
Still no solution.
Itz frustrating that neither proper documentation nor a right url page nor i am aware of available addressing this. page links given in above threads only gives me the wonderful page of ie's "Page cannot be displayed".
Is there a answer to this error and my problem. If this doesn't work, then i have to all the way develop from scratch creating my jsp using JDBC calls and Stored packages etc.
I don't want to give up on this Jdeveloper at this final moment because if this bc4j.xcfg file is found, my application will work perfectly. on these final moments, if this doesn't work, i am frightened to imagine to develop my application in standard way. Atlast, if thatz the option left,we have to do that bcos our production date is close by.
Please can some one in this forum or Jdeveloper help me to solve this problem. I am desperate and very urgent.
Waiting for a reply from Jdev team very much...
( I just posted in the other thread which is pretty old, dated backto May 2001, which was relevant to this error. Just to make sure it is noticed, I am posting it seperately too)
Thanks
Hari(2/3/02)

Hi All,
For those who are following this thread, I got a solution for this error with the help of Jdev Team.
This solution may work, if you have deployed your application in Tomcat4.0.1. This is the environment in which I work and tested.
As you may be aware, Tomcat ignores value in CLASSPATH variable.
To see any files that are existing or newly deployed, it has it own way of detecting it.
Addition information on Tomcat working, you can follow this link,
http://jakarta.apache.org/tomcat/tomcat-4.0-doc/index.html
Coming to point, Tomcat has got five classloaders and each classloader invoked, looks in their related directories for files in following order.
1. /WEB-INF/classes of your web-application
2. /WEB-INF/lib/*.jar of your web application
3. BootStrap classes of your JVM (Tomcat's $JAVA_HOME/jre/lib/ext)
4. System class loader classes($CATALINA_HOME/bin/bootstrap.jar,CATALINA_HOME/lib/tools.jar)
5. $CATALINA_HOME/common/classes
6. $CATALINA_HOME/common/lib/*.jar
7. $CATALINA_HOME//classes
8. $CATALINA_HOME/lib/*.jar
So All your individual application related files should be deployed in your application's WEB-INF/classes or WEB-INF/lib directory accordingly.
If your application files are unpacked, they should be deployed or copied under WEB-INF/classes directory
if the files are within a jar, they should be under WEB-INF/lib directory.
If your Jar-files contains bc4j components, then those jar files should be deployed under WEB-INF/lib directory. Also,do the next step to copy all relavant BC4J runtime libraries under lib directory.
IMPORTANT: Please remember to copy and paste all the required BC4j runtime libraries in the Same WEB-INF/lib directory along with your application jar files. This is the real reason which can solve this JBO:33001 to disappear. It worked for me.
To configure your directory for tag-lib uri's, use web.xml to set the taglib-uri attribute.
Put your web.xml and DataTags.tld in the WEB-INF directory.
Your simple web.xml may look like as follows.
<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE web-app
PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"
"http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app>
     <taglib>
          <taglib-uri>
               /webapp/DataTags.tld
          </taglib-uri>
          <taglib-location>
               /WEB-INF/DataTags.tld
          </taglib-location>
     </taglib>
</web-app>
You may then modify this web.xml to suit further requirements of your application.
Remember to stop and restart the Tomcat Server (service) by using shutdown and startup scripts after updating any jar files/class files/ JSP or source files deployed in Tomcat.
Sometimes, only this helps even though your context's reloadable attribute is set to true in Tomcat Server's server.xml file.
Hope this above information helps you to solve this error in Tomcat environment. My Sincere thanks once again to Juan and Jdev team for their help and efforts to solve this problem.
Thanks
Hari

KEU5 – It does not found senders (emisor) for segment.

Dear Expert Sap
Please, I try to explain the following scenary :
I had created one purcharse using ME21N transaction, that it had one service and imputation on cost center (CeCo)
I had created document using ML81N and accepting.
I can lookup posting document FI and it is correct.
I can lookup posting document profit center cost
But it did not create posting on COPA. Because It did not have configuration or specified OKB9: Cost Ctr (KSTAR) assigned - > Cost element master (KOSTL).
When I am excuting this report S_ALR_87013611 - Cost Centers: Actual/Plan/Variance.
I are seing income as statistical posting under cost centres.
Cost centres cannot have 'real' income postings. It is correct.
Because Cost Ele category is equal “12” and (Cost Ele category 11 or 12) are posted AS statistical on cost centers.
Finally:
Bussines need that "posted as statistical on cost centers" => it should create on COPA.
We are thinking that we can using a cycle in KEU5 transacction.
But whem we are executing transaction KEU5 son it get this message:
– It does not found senders (emisor) for segment.
Unfortunately, I am not found one note oss.
Could you check this and recommend the best option? or could you recommend any note oss, please?
All your recomendations will be welcome.
Thanks a lot for your recomendation and help.
Best regards,
Gustavo Hermoza

Thank you very much for your answer, Ronghua!!!
I am thinking about your recomendation about using substitucion (OKC9) to derivate the PAOBJNR as reael account assignment.
It will probably be good idea but Step(Okc9) does not derivate or move characteristics to RKE_GET_ACCTNR Function. Because we dont not know this characteristics.
We had reviwed cost line items for cost center and we are seeing that all document are Material Document and this document dont have fields to derivate characteristics.
Another alternative:
Transaction KA02 change category element.
Field change CElem Category is not possible (transaction data already exists)
Diagnosis
To ensure the consistency of existing data, you can only change object CElem Category if no transaction data exists in the change period; that is, neither plan data nor actual data has been posted.
As transaction data already exists, it is not possible to change objects in this time period.
Procedure
If you still want to change the object, select a suitable change interval by choosing "Edit -> Analysis period...".
I want to show this post it is good.
Profitability segment - ERP SD - SCN Wiki
Thanks a lot for your recomendation and help.
Best regards,
Gustavo Hermoza

Suitable JVM not found

Similar Messages

Maybe you are looking for