SUM function not working correctly (not a rounding issue)

OK.
So in the E-column, I have a list of statistics going from E4 through E11. E12 is supposed to give the sum of the preceding numbers within that range.
         E
4     34000
5      7000
6      7000
7    30500
8      7000
9      3000
10          0
11    1500
The sum of these numbers should appear in the next row, E12, where I have the formula: "SUM E4:E11". However, whereas E12 should be giving me $91,000, it's instead giving me $57000. There's nothing that I can see that is wrong with my formula. If I modify one of the cell amounts, the 57000 will change by the amount I changed the cell. But there's no reason on earth it should be giving me 57000. I thought maybe there is an issue with how large a cell number can be, but if I change the 0 to a 1 in E10, it outputs 57001 to E12.

I cannot confirm your problem.
When I add: "34000+7000+7000+30500+7000+3000+1500" in the spotlight (top right of the menu bar),  the total of is 90,000
Using Numbers, I also get 90,000
=SUM(E1:E8)
There is something wrong with your data.
Please post a screenshot

Similar Messages

  • The calendar sync is recently not working correctly, not display "All events" but it only displays the last six months for my individual entries. My repeating entires do go back further, though. How do I fix?

    I have an iPad 5.1.1. The calendar sync has started to not work correctly. I have it checked "All events," but it only displays the last two months for my individual entries. My repeating entires do go back further, though. How do I fix?

    HI Jason269. Thanks for your reply, however I wrote that I already have "All events" checked. If All Events is checked and it doesn't diaplay all events, how do I fix? It seems this is a common issue, as I have read many others on here state the same problem.
    I believe my problem occurred when I synced my iMac calendar to my iPad calendar using yahoo. Yesterday, I unsynced them on my iMac controls. When I checked my iPad calendar, all of my old entries reappeared - but only for five seconds and disappeared again. So, the data is saved and still there but cannot be displayed, even when I have All events checked. In fact, it only shows my individual entries for the last two months, but does show all my recurring entries. If I switched to last six months, I will see everything for the last six months. If I switch back to all events, it is only for the last two months.
    As I mentioned, others on here have expressed exactly the same issue, including the two month example and having used yahoo.
    For legal purposes, I need to be able to use the information from my indidual calendar entries in an upcoming court case. So I really need to fix this ASAP!

  • Not working correctly, not connecting to ford sync since 3.1.2

    I have a first gen ipod touch and ever since I downloaded 3.1.2, i get a messed up screen sometimes while playing music and my ipod will not connect to my sync in my edge anymore. any tips?

    Apparently this is a problem with the iPhone 3.1 OS not working with Ford Sync. I have a Ford Fusion and I have had problems ever since updating my iPhone to 3.0.
    From Ford:
    If your device has been updated to Apple firmware version 3.1 (or greater), then you will experience an INDEXING concern which may limit functionality of the device with SYNC, including longer indexing times (e.g., 30 minutes). Note: Earlier versions of the iPhone firmware are not affected. The Ford SYNC Team is aware and has been in communication with the Apple team regarding the concern. We will post an updated response once more information is known. We appreciate your patience and would like to offer the following recommendations for continued usage of SYNC and your device:
    -Use the AutoPlay feature. SYNC will still playback content on the device that is on the "Now Playing" list of the device. Media control will be limited to the Play, Pause, Next and Previous Track.
    -If the device supports Bluetooth Audio, connect to the device with SYNC BT Audio/Media Stream. Media control will be limited to Play, Pause, but can also be controlled directly on the device.
    -Use the Line In input to connect to the device headphone audio jack. The media will need to be controlled on the device directly.
    -Transfer unprotected contents to a USB flash drive. SYNC supports playback with full media control of iTunes formatted unprotected media.
    -Allow some additional time for the device to index.
    If you have any additional questions, you may also contact our SYNC Support team via chat, e-mail, or phone. Thanks.
    Source:
    http://boards.synccommunity.com/n/pfx/forum.aspx?tsn=1&nav=messages&webtag=fords yncmb&tid=1987

  • Ipod not working correctly, not frozen, nothing on it.

    My ipod was connected to this ipod dock and all of the things on my ipod were completely erased, pictures, songs, everything. Since then it has been not working properly. When i try to update my ipod i wont let me. iTunes keeps giving me this message that says that i have to restore my ipod back to factory settings. I dont know how to do that. The ipod shows up on my computer desktop but not in Itunes. Also when i connect it to the computer the "do not dissconect" sign shows and does not go away.
    also i was wondering does apple have an Email where I could Email them abut my ipod trouble or do i have to call the number?
    what do i do? thankyou so much for taking the time to help me out.

    Check out these troubleshooting guides.
    Restoring your iPod.
    iPod does not appear in iTunes (Mac).
    If you have your iPod set to automatically transfer songs, right click on the iPod in iTunes, select options and if you have a check mark in the box marked “enable disk use”, remove it and your iPod should automatically disconnect after it’s finished transferring music. If it's set for manual transfer of songs, then you have to manually disconnect the iPod. You can just right click on it and select eject, or just drag it to the trash.
    There is no email for tech support, only telephone support. Unless you have AppleCare, it's only one support issue that's free, and within the first 90 days of purchase.
    This explains.
    Complimentary support.
    Mac Mini Super Drive; 1GB RAM; 20 Cinema Display; Airport Extreme; Maxtor 250GB ext hd   Mac OS X (10.4.3)   iPod 60GB (video); iPod 60GB (colour); 4GB nano.

  • Freebusy lookups via OWA not working correctly (notes coexistence)

    Hi,
    We're performing a migration from notes to exchange 2013, and are currently using contacts for the resource mailboxes that are still in notes.
    When looking up freebusy information via outlook, all is ok, but when we query the rooms (contacts) via OWA, we get the status unavailable.
    It looks like a timeout, since querying the freebusy is being performed correctly (quest coex freebusy server).
    If I'm correct there was a timeout that can be configured for crossforest ews lookups in earlier exchange versions.
    Is this still the case in Exchange 2013 CU3? And if so, where can I configure it?

    Hi,
    I recommend that you refer to the following methods to troubleshoot the issue:
    1.Please run EXRCA to check the availability information.
    https://testconnectivity.microsoft.com/
    2.Exchange Web Services is used to retrieve the availability information, you can use Internet Explorer to verify that we have access to the Highlighted URL from below:
    In addition, here is a similar thread for your reference:
    Booking room shows "No Information" Status in OWA
    Hope this helps!
    Thanks.
    Niko Cheng
    TechNet Community Support

  • Activity Monitor not working correctly / not listing processes

    When I open Activity Monitor, it does not display a list of processes. The CPU usage works in the bottom of the window as does the disk usage. None of the other graphs display any graphing/data.
    I have rebooted, relaunched AM and I selected "all processes" but it still doesn't show processes.
    I used the terminal command "top" and can see processes in the terminal window.
    thanks for any assistance,
    Harold
    imac 2.8 dual core/24"/2gb/os10.5.5

    Thanks for the quick reply. I couldn't find the activity monitor preferences file you specified, in the Preferences directory. Here's what I've done: I rebooted from an older backup image on my external drive that I made using superduper. The activity monitor app worked from this disk image. I copied the AM app into my current drive, where it showed as a copy.
    I rebooted, and attempted to use this copy. It wouldn't let me due to file permissions problems of some sort. I opened the current version of AM and now it works.
    I'm not sure what fixed the problem, but Activity Monitory now seems to be working OK.
    thanks,
    Harold

  • Superdrive not working correctly (not reading CD-Roms)

    Since installing Snow Leopard last year, I have found that my intel iMac no longer reads CD-Roms (commercial music CDs). It will still read/write to DVD-Rs, read and play DVDs, read/write to CD-Rs. Any ideas? I'm not fond of spending $200+ for a new internal Superdrive, when I can pick up a new slimline DVD read/write combo unit for $30.....

    Mariamne,
    The plot unfolds... Look for any copy-protection notices on the faces of your problematic commercial discs. If you find any, stop here and post back. If you don't, please continue.
    Load a problematic original commercial CD into the optical drive. Once it mounts, check the file sizes of the individual tracks, which should be somewhere in the range of 30-50 MB per file. Do this via a Finder window. (You won't be able to view the file sizes via iTunes unless you first import the files.) If the sizes are in this range, then continue. If not, stop and post back.
    Launch iTunes and from the iTunes menubar, choose iTunes>Preferences. Click on the Advanced tab in the preferences window and then click on Importing. Make note of your preferred import setting so you can reset it again later. There select Import Using AIFF Encoder and check the four boxes below. Next click on the Burning tab and select the Audio CD burn option. Click Okay to close the window and then import the CD. The imported file sizes in iTunes should match the CD file sizes of the original disc. if they do, please continue. If not, stop and post back.
    Attempt to play the imported files with iTunes. If successful, eject the original CD and attempt to burn a blank CD. Check play on the burned CD once it mounts to the desktop, using iTunes.
    Please post back with your results.
    Gary
    ps: What type of computer are you dealing with here? Is it a Powermac G4 or an Intel iMac?

  • ITunes Store Pages not working correctly

    Since a few days ago iTunes Store (on full page) is not working correctly. The "pictures at the top" do NOT rotate any more (usually every 10 seconds or so before) often with blanks too. Also when clicking on an Lp information the box appears but Blank too. I have tried all the usual methods - permissions and disc checks etc. If I use small page (not full) it seems to work OK. The problem began after Safari 5 arrived. Anyone else having iTunes problems like this? (Similiarly the Dictionary Application with Wikipedia is not working correctly - but thats another issue!). Any answers out there??
    Message was edited by: Dave Jelfs

    This issue has now been completely resolved with the introduction of iTunes 9.2 Everything up and running again - thank you Apple! (Still an issue with Dictionary app/Wikipedia not functioning correctly, this has not been resolved)

  • Function keys are not working correctly

    I've been looking all over the various threads and I can't find an answer that solves my problem.
    Here are the details:
    I bought the computer in the U.S. where I live.
    I have a iMac 2.4GHz intel Core 2 Duo  EMC 2133 with a 20" screen. Bought it new in February 2008.
    I have Mac OS X 10.5.8  (I am waiting for my order for OS Snow Leopard to come in!!)
    I have been using a wireless mouse and Keyboard (Love not having cords!)
    Recently, my wireless keyboard got a short and quit working. I went down to the apple store and got a new wireless keyboard.
    I had the computer with me at the genius bar so, yes, the apple employee saw exactly what I have.
    I took it all home got the thing all put back together and got the new keyboard paired up and working with the computer.
    Here are the problems:
    Went to go use the function keys while using iTunes and found they weren't working properly. The F10, F11 and F12 do not control the volume of sound as the keyboard indicates they would, they instead activate dashboard, spaces, and application windows. 
    Following the advice of other threads, I looked over in the system preferences and made sure the "Use all F1, F2 etc." box was unchecked (it was unchecked), things still didn't work.
    I tried the fn key but it appears to not work at all it has no effect on the functioning of the function keys.
    I went under keyboard shortcuts in system preferences and found the F10, F11 and F12 keys, it confirms that those keys control spaces, dashboard and application windows as they are performing but shows no options to either reassign to volume control (as marked on the keyboard) or make the fn key work.
    I've gone back and forth trying various combinations of checked and unchecked boxes to see if anything would work, so far I've come up with nothing.
    A couple more important or interesting facts:
    Yes I have turned off and taken the batteries out of the old keyboard. My bluetooth connection currently shows it as disconnected.
    I have restarted the computer.
    One thing I find odd; when I go under preferences and go to Keyboard and Mouse when I go under the section "Bluetooth" it shows Bluetooth mouse with the name of the mouse and the battery level. BUT nothing is showing up under bluetooth Keyboard, I can't figure out how to change this and don't know if it is contributing to the problem.
    When I go under the bluetooth logo on the top bar I find the mouse and both keyboards referenced, the old keyboard is shown as disconnected and the other two are connected. I have tried to update the device's name but it doesn't seem to let me.
    I have double clicked on the device under bluetooth and it shows the new keyboard as discoverable, paired and connected. Hence, I am using the new keyboard to write this inquiry.
    Please, any assistance would be of great help. I have tried to be thorough in order help narrow the possible problem. Thanks!!

    Hendry
    Just thought I'd let you know.  Our suspicions were correct, it was the OS. After I installed Snow Leopard (10.6.8) all the problems were corrected.  I also updated the RAM from 1 gb to 6 gb. The mac is working all around better. Sorry it took so long to get back to everyone. My superdrive had pooped out. Rather than replace it I got an external drive from OWC connected with firewire 800.  So far everything is running very well, as far as I can tell this external drive is better than the original superdrive. My superdrive has always acted funny, infact I returned the first mac I got after a week because its superdrive was also malfunctioning. Anyway, all that to say everything seems to be fully functioning again.
    Roy
    Re: Function keys are not working correctly 

  • I have a manual that contains headings and index entries that contain less than and greater than characters, and . The Publish to Responsive HTML5 function escapes these correctly in the main body of the text but does not work correctly in either the C

    I have a manual that contains headings and index entries that contain less than and greater than characters, < and >. The Publish to Responsive HTML5 function escapes these correctly in the main body of the text but does not work correctly in either the Contents or the Index of the generated HTML. In the Contents the words are completely missing and in the index entries the '\' characters that are required in the markers remain in the entry but the leading less than symbol and the first character of the word is deleted; hence what should appear as <dataseries> appears as \ataseries\>. I believe this is a FMv12 bug. Has anyone else experienced this? Is the FM team aware and working on a fix. Any suggestions for a workaround?

    The Index issue is more complicated since in order to get the < and > into the index requires the entry itself to be escaped. So, in order to index '<x2settings>' you have to key '\<x2settings\>'. Looking at the generated index entry in the .js file we see '<key name=\"\\2settings\\&gt;\">. This is a bit of a mess and produces an index entry of '\2settings\>'. This ought to be '<key name=\"&amp;lt;x2settings&amp;gt;\" >'. I have tested this fix and it works - but the worst of it is that the first character of the index entry has been stripped out. Consequently I cannot fix this with a few global changes - and I have a lot of index entries of this type. I'm looking forward to a response to this since I cannot publish this document in its current state.  

  • HT2216 I am on OSX 10.7.5 and recently had to reinstall it due to 'mail' not working correctly.  That problem was resolved but now my I can't use the 'right click' function on the apple usb mouse.  Any clues?

    I am on OSX 10.7.5 and recently had to reinstall it due to 'mail' not working correctly.  That problem was resolved but now my I can't use the 'right click' function on the apple usb mouse.  I only have a previous version re-install disc as I bought the latest OSX off the app store.  Any help gratefully received?

    Hmmm, no, no drivers needed, now it sounds like a bad install... unless you might have some old Mouse software installed???
    If 10.7.0 or later...
    Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
    If that doesn't help Reinstall the OS.

  • Brush function not working correctly PS Elements 11 for Mac

    The brush is not working correctly in that I cannot drag the brush.  It allows only spot healing, not dragging the brush.  Didn't use to have this problem.  Now do.  Not sure what has changed.  Thank you!

    Is this happening after upgrading to Yosemite?
    If yes, please see:
    Photoshop Elements doesn't respond when you use editing tools in Mac OS X 10.10
    Thanks,
    Anwesha

  • ** Filtering is not working correctly in ALV (REUSE_ALV_GRID_DISPLAY)

    Hi Friends,
    We have one Z report that output is displayed in ALV. We are using the standard FM 'REUSE_ALV_GRID_DISPLAY. 
    We have requirement to remove leading zeros for the field like Material Number (MATNR), Equipment Number (EQUNR) etc. We did the changes by applying the field catalog properties as below.
    lw_fieldcat-lzero = space.
    lw_fieldcat-no_zero = 'X'.
    After this, the MATNR and EQUNR is displayed correctly in the ALV. (Leading zeros are suppressed). But, when we do filter for these fields, in the filter window it displays all the values with leading zeros.
    1. We don't understand why it is showing in the Filter widow with all leading zeros. All it shows all the records instead of unique items.
    Later on, we removed the above fieldcat coding. Then, we have called the CONVERSION_EXIT routines (in the domain) for the fields to remove leading zeros.
    Now, the MATNR and EQUNR is displayed correctly (without leading zeros) in ALV. When we do filter, it is also doing filtering correctly. But, when we do filter which have EQUNR having long values (after zero suppression), it is not working correctly. i.e no items are displayed in the ALV.
    Not only for this items. If we filter character columns which have long text, it is not filtering correctly.
    2. It is not able to understand why the filtering is not working for long items. But in the standard report, the filtering is working correctly.
    We are using SAP ECC 6.0.
    Friends, can you clarify the about doubts. It is surprising for me.
    Kind regards,
    Jegathees P.
    Our customer is asked to remove the leading zeros for the numeric field

    Hi Clemens Li
    I agreed on your point. When we define the Internal table the type for element EQUNR & QUMNR , we are referring the SAP data element for EQUNR, QMNUM field.
    Our doubt is even though we refer the standard data element, in the ALV display, it shows with leading zeros and also it creates problems in the filtering and in the filter window all values instead of unique nos.
    Hi Abhii
    I have given below the fieldcat coding.
    Friends, can you kindly clarify the above said problems. Since we use SAP ECC 6.0 any notes or patches apply is required. ( this is the basic functionality in ALV, that is my doubt).
        wls_fieldcat-col_pos   = wpv_pos.
        wls_fieldcat-fieldname = wpv_champ.
        wls_fieldcat-tabname   = wlc_tabname.
      wls_fieldcat-seltext_s = wls_fieldcat-seltext_m
        wls_fieldcat-seltext_l = wpv_libelle.
        wls_fieldcat-ddictxt   = 'L'.
        wls_fieldcat-no_out    = wv_no_out.
        APPEND wls_fieldcat TO gt_fieldcat.
    Kind regards,
    Jegathees P.

  • Key Figure calculation in Abap is not working correctly - Overlooping

    Hi,
    I wrote a logic to calculate the ratio of key figure but it is not working correctly
    For example I have a requirement to split 1 Product into Several new Products and also the Net Amount will be splitted to these several new products as well. The total Amount of the new product will be equivalent to the Net Amount.
    So far my Logic is splitting the product to several new products but the amount is incorrect as the calculation is over looping.
    Sample
    A PRODUCT has Net Amount 1000. And this product needs to be splitted into 3 new products. Each of this new product is assigned a ratio of 0.3, 0.2 and 0.7 respectively. total sum of the ratio is 1.
    PRODUCT1 0.3 = 1000 * 0.3 = 300
    PRODUCT2 0.2 = 1000 * 0.2 = 200
    PRODUCT3 0.7 = 1000 * 0.7 = 700
    The total amount of this new products is 1000.
    Now my logic is working this way.
    PRODUCT1 0.3 = 1000 * 0.3 = 300
    PRODUCT2 0.2 = 1000 * 0.2 * 0.3 = 60
    PRODUCT3 0.7 = 1000 * 0.2 * 0.3 * 0.7 = 42
    Only the PRODUCT1 is working correctly and there is overlooping for the remaining products
    Logic used
    DATA: t_data TYPE data_package_structure OCCURS 0 WITH HEADER LINE.
    DATA: t_newdso LIKE /bic/newdso OCCURS 0 WITH HEADER LINE.
    DATA: t_olddso LIKE /bic/olddso OCCURS 0 WITH HEADER LINE.
    DATA: amount LIKE data_package-netamount.
    DATA: zidx LIKE sy-tabix.
    REFRESH t_data.
    LOOP AT data_package.
      zidx = sy-tabix.
      MOVE-CORRESPONDING data_package TO t_data.
      REFRESH t_newdso.
      SELECT * FROM newdso INTO TABLE t_newdso WHERE prod =
      data_package-prod.
      SORT t_newdso BY prod.
    *LOOP AT T_NEWDSO.
      READ TABLE t_newdso WITH KEY prodh4 = t_data-prod.
      IF sy-subrc EQ 0.
        LOOP AT t_newdso.
          t_data-prod = t_newdso-/bic/znew_mp.
          t_data-material = t_newdso-material.
    *T_DATA-NETAMOUNT = T_DATA NETAMOUNT * T_NEWDSO-/BIC/ZSP_RATIO.*
          APPEND t_data.
        ENDLOOP.
      ELSE.
        REFRESH t_olddso.
        SELECT * FROM olddso INTO TABLE t_olddso WHERE prod =
        data_package-prod.
        SORT t_olddso BY prod.
        READ TABLE t_olddso WITH KEY prodh4 = t_data-prod.
        t_data-prod = t_olddso-prod.
        t_data-material = t_olddso-material.
        APPEND t_data.
      ENDIF.
      MODIFY data_package INDEX zidx.
    ENDLOOP.
    REFRESH data_package.
    data_package[] = t_data[].
    thanks
    Edited by: Matt on Sep 27, 2010 2:25 PM - added  tags

    Hi,
    I am not really good at debugging Abap code since I am a newbie. however  I have tried to add CLEAR T_DATA before the first loop.
    REFRESH T_DATA.
    LOOP AT DATA_PACKAGE.
    ZIDX = SY-TABIX.
    MOVE-CORRESPONDING DATA_PACKAGE TO T_DATA.
    and before the second loop and select statement and at the end of the loop.
    REFRESH T_NEWDSO.
    SELECT * FROM NEWDSO INTO table T_NEWDSO WHERE PROD =
    DATA_PACKAGE-PROD.
    SORT T_NEWDSO BY PROD.
    READ TABLE T_NEWDSO WITH KEY PROD = T_DATA-PROD.
    IF sy-subrc EQ 0.
    LOOP AT T_NEWDSO.
    but then not all data are being fetched.
    thanks
    Edited by: Bhat Vaidya on Sep 28, 2010 8:33 AM

  • LaserJet Pr0 200 color MFP M276nw Touch Screen not Working correctly

    Hello, I'm having an issue with a LaserJet Pr0 200 color MFP M276nw Touch Screen not Working correctly. I have followed the instructions to reset the printer, but now am unable to select 'English' as my language because every time I select the 'English' option 'Spanish' is selected. I am then given two options to select 'Si' or 'No' both of which can not be selected on the touch screen?
    Anybody know of a way round this?

    Hi @dnhowes ,
    I see that you are having issues with the touch screen not working correctly. I will do my best to help you.
    Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector) This ensures the printer is receiving full power and may help this situation.
    Was it the Nvram reset back to factory settings that you tried or a hard reset?
    Try selecting the option on the display a little higher above the icon to see if that helps. Some touch screens are finicky.
    I find that on the Lab printers when I am selecting different menus.
    If the issue continues, please call our technical support at 800-474-6836 for further assistance. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

Maybe you are looking for