SunMC 3.6.1 Agent and zones

Hi folks,
I'm wondering how to handle zones with SunMC 3.6.1. We're planning to use zones in the future, mostly whole root zones. As far as I understood, I need to install the agent in the global zone and in the local zone afterwards. Is this correct?
Thanks in advance

1. How does the container manager link with SunMC.
Does monitor info go to the sunMC server ?SCM is one of the optional components you're prompted to add when you're installing SunMC Server and Agents. The way it works on the Server is that SCM adds an extra web interface, and it relies on the SunMC for host lists and a place to store it's data (i.e the graphs shown in the SCM web interface are actually coming from the SunMC Oracle database).
On the Agent side, all that happens when you say "y"es to SCM during install is that it adds a hidden module to the Agent that collects container/zone-type data, and can do the bidding of the SCM web interface (i.e. make/destroy Zones, alter CPU pools and container shares etc)
Do you only have to install the container manager
on the global zone ?Yes, it's only required for the SunMC Agent in each global zone. It's that Agent that can "see everything" about the containers and zones that are running.
Regards,
[email protected]
http://www.HalcyonInc.com

Similar Messages

  • Question for register Oracle agent inside Zone

    Hi All,
    There is a question about register an Oracle agent inside zone:
    Let�s say S1, S2 be the global zone for the hosts of a pair of Sun cluster, and zone1, zone2 as the non-global zone respectively.
    Zone1 and zone2 with the zone path /dbzone, and the oracle binary is installed in zone1 and zone2�s local disk, with path /home/oracle/10.2 as the ORACLE_HOME.
    Therefore, the corresponding path to the host S1 and S2 is /dbzone/root/home/oracle/10.2.
    And when we register the Oracle HA resource, with input the oracle home as �/home/oracle/10.2�, it will prompt that the directory is not contain required Oracle file.
    And if we change to �/dbzone/root/home/oracle/10.2�, it will prompt with error when create resource, with the message, S1:zone1, path �/dbzone/root/home/oracle/10.2� not exist.
    We currently to solve the problem by moving the oracle binary to SAN disk, with mount point name �/u01/oradata/portal/oracle/10.2� on the both global and non-global zone.
    I would like to ask that is there any missing syntax or any document about how to register ORACLE_HOME inside zone�s local disk?
    Thanks,
    Cheung

    Cheung,
    You probably haven't got the init<SID>.ora file in both ORACLE_HOME/dbs directories or something like that. Have a look at /var/adm/messages on both these zones and the global zone and see if there are any more hints as to what is missing.
    Regards,
    Tim
    ---

  • UCCX 7.0.1SR5 to 8.0 upgrade while also adding LDAP integration for CUCM - what happens to agents and Historical Reporting data?

    Current State:
    •    I have a customer running CUCM 6.1 and UCCX 7.01SR5.  Currently their CUCM is *NOT* LDAP integrated and using local accounts only.  UCCX is AXL integrated to CUCM as usual and is pulling users from CUCM and using CUCM for login validation for CAD.
    •    The local user accounts in CUCM currently match the naming format in active directory (John Smith in CUCM is jsmith and John Smith is jsmith in AD)
    Goal:
    •    Upgrade software versions and migrate to new hardware for UCCX
    •    LDAP integrate the CUCM users
    Desired Future State and Proposed Upgrade Method
    Using the UCCX Pre Upgrade Tool (PUT), backup the current UCCX 7.01 server. 
    Then during a weekend maintenance window……
    •    Upgrade the CUCM cluster from 6.1 to 8.0 in 2 step process
    •    Integrate the CUCM cluster to corporate active directory (LDAP) - sync the same users that were present before, associate with physical phones, select the same ACD/UCCX line under the users settings as before
    •    Then build UCCX 8.0 server on new hardware and stop at the initial setup stage
    •    Restore the data from the UCCX PUT tool
    •    Continue setup per documentation
    At this point does UCCX see these agents as the same as they were before?
    Is the historical reporting data the same with regards to agent John Smith (local CUCM user) from last week and agent John Smith (LDAP imported CUCM user) from this week ?
    I have the feeling that UCCX will see the agents as different almost as if there is a unique identifier that's used in addition to the simple user name.
    We can simplify this question along these lines
    Starting at the beginning with CUCM 6.1 (local users) and UCCX 7.01.  Let's say the customer decided to LDAP integrate the CUCM users and not upgrade any software. 
    If I follow the same steps with re-associating the users to devices and selecting the ACD/UCCX extension, what happens? 
    I would guess that UCCX would see all the users it knew about get deleted (making them inactive agents) and the see a whole group of new agents get created.
    What would historical reporting show in this case?  A set of old agents and a set of new agents treated differently?
    Has anyone run into this before?
    Is my goal possible while keeping the agent configuration and HR data as it was before?

    I was doing some more research looking at the DB schema for UCCX 8.
    Looking at the Resource table in UCCX, it looks like there is primary key that represents each user.
    My question, is this key replicated from CUCM or created locally when the user is imported into UCCX?
    How does UCCX determine if user account jsmith in CUCM, when it’s a local account, is different than user account jsmith in CUCM that is LDAP imported?
    Would it be possible (with TAC's help most likely) to edit this field back to the previous values so that AQM and historical reporting would think the user accounts are the same?
    Database table name: Resource
    The Unified CCX system creates a new record in the Resource table when the Unified CCX system retrieves agent information from the Unified CM.
    A Resource record contains information about the resource (agent). One such record exists for each active and inactive resource. When a resource is deleted, the old record is flagged as inactive; when a resource is updated, a new record is created and the old one is flagged as inactive.

  • I teach Continuing education classes to Real Estate agents and I need to issue them certificates at the class, whihc need to be signed by me and it needs to contain their info on the certificate. The certificate is currently saved in a word format.What i'

    I teach Continuing education classes to Real Estate agents and I need to issue them certificates at the class, whihc need to be signed by me and it needs to contain their info on the certificate. The certificate is currently saved in a word format.What i'm trying to accomplish is to do a "mail merge " ( as some classes i have as many as 150 attendees) for the document, digitally sign each one with my signature on the certificate and then e-mail it out to the respective attendees. can this be done? if so How?

    This is the step that I took after inputting my signature.
    On the right, after saving my document, I click "Get Others to Sign."  I was confused because it says that it's powered by EchoSign.  Like I stated before, my clients are able to sign this document when I send it to them, but it is returned to me with their signature (not in the signature field, but at the end of the document), and my signature is missing.  I tested this on myself - my signature is missing when they receive it. 

  • SQL Server Agent and Jobs and executing @EventData

    I have a SQL Server Agent Job and within it a Job Step which states "Execute Report Subscriptions" and a command which has...
    exec msdb.dbo.sp_start_job '6FF53AED-855F-43AB-9FB7-064062B8012E' --9:07 subscription
    GO
    WAITFOR DELAY '00:08';
    Now, I find within SQL Server Agent the Job  '6FF53AED-855F-43AB-9FB7-064062B8012E' and its step command which is...
    exec [ReportServer].dbo.AddEvent @EventType='TimedSubscription', @EventData='ca4e5410-2758-4a1a-9b06-513821e0d962'
    How can I drill-down further into the @EventData 'ca4e5410-2758-4a1a-9b06-513821e0d962' to see what it does? I do not see 'ca4e5410-2758-4a1a-9b06-513821e0d962' within SQL Server Agent and Jobs or am I way off base here as to what exactly the @EventData
    parameter seems to be?
    Thanks for your review and am hopeful for a reply.

    Hi ITBobbyP,
    According to your description, you need to know the what does SQL Server Reporting Services do when fire a subscription, right?
    When you create a subscription several things are added to the RS server
    A row is placed in the Subscriptions table identifying the name of the report, along with parameter settings, data driven query info and so on to process the subscription
    A row is placed in the Schedule and ReportSchedule tables with the timing of the subscription
    A SQL Server Agent job is created to control the scheduled execution of the report, and this is stored in the sysjobs and sysjobsteps of the MSDB database.
    When the subscription runs several things happen
    The SQL Server Agent job fires and puts a row in the Event table in the RS catalog with the settings necessary to process the subscription
    The RS server service has a limited number of threads (2 per CPU) that poll the Event table every few seconds looking for subscriptions to process
    When it finds an event, it puts a row in the Notifications table and starts processing the subscription
    Please refer to the links below to see the details.
    http://blogs.msdn.com/b/deanka/archive/2009/01/13/diagnosing-and-troubleshooting-subscriptions.aspx
    http://blogs.msdn.com/b/deanka/archive/2010/02/16/troubleshooting-subscriptions-part-ii-using-the-report-services-trace-log-file.aspx
    Regards,
    Charlie Liao
    TechNet Community Support

  • Mapping del credere agent and consignment stockist in sap sd

    Dear Gurus
    My client has trading business with IOCL company acted as a del credere agent and consignment stockist. Generally, IOCL sending the material our company go down. we do the business with the customers and we are paying the amount to the IOCL in advance and we are taking the money from the customer. For doing this business we are getting from the IOCL. we are also maintaining RG23D register. Our go downs are registered as depot. But we are not selling the material directly, please tell me how can we map this scenario.
    Regards
    thirupathi

    hi,
    Sales office is termed as an internal organisation element in SAP. ie:- Its a representation of the company at a specified geography.
    The distributor is always a customer for the business. The operations of the distributor are completely different from the company. Hence, mapping distributor as a sales office is completely ruled out.
    The distributors can be taken as a DISTRIBUTION CHANNEL in the org structure.
    All the distributors are created as customers in a specific sales area.
    Secondary sales is a business activity happening from the distributor to the dealer.
    So, in any business automation(not only SAP) we need not automate this activity.
    This would be automated by the distributors. We can only frame business regulations in domain for the secondary sales but not automate it.
    Reward if helpful.
    regards,
    sriram

  • Link scanner agent and loader agent pop ups that won't go away

    Link scanner agent and loader agent pop ups won't go away.  How do I get them to stop?

    the same thing has been happening to me for a while, it doesnt seem to affect anything but i would like to get rid of it, i feel like it might be a bug.

  • My Intermedia Web agent and Clipboard doesn't work!

    Hi,Simon
    I'v just downloaded the Intermedia Web agent and Clipboard plugin from OTN a few days ago.But both of it don't work when I install it.Would you please help me look for the reason?
    My operating system is Windows 2000 Professional,and my web server is OAS 4.0.8.1,and my database is 8i.
    When I visit these address"http://host:port/intermedia/^about"and "http://host:port/intermedia/admin",the browser returns to me a error page.
    When I connect to host in Clipborad,it returns to me an error message which says"The following error was received from the intermedia web agent,<HTML><HEAD><TITLE>Invalid host specified</TITLE></HEAD><BODY>The request did not specify a valid virtual host</BODY>
    I don't know if this web agent can work with OAS 4.0.8.1 and if OAS 4.0.8.1 can run in the Windows 2000 Professional.
    Thanks
    null

    Hi,Simon,
    Thank you for your help!I have sent my application information to your product manager by email!
    But the error stll appears.When I typed the whole domain name in the host area of Clipborad,the error message changed to "An application error has occured,please try again!".When I typed the address"http://My host:port/intermedia/~about"(I have substituted ^ with ~ )"and "http://My host:port/intermedia/admin",it still returns an error page which says"HTTP 500 Server internal error......"like before!
    Also,I found other errors about OAS.One Application cannot add the second Cartridge,it returns an error:"OWS-09103:Cartridge section'[Application wscWRBApp" when I do it.So I suspect the reason is my operating system platform,I will try to reinstall it now.
    Regards!
    Reemon                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • Access Manager Policy Agent and Oracle AS

    Hi,
    my system uses Oracle Application Server. The security dept use Sun Access Manager. I need to integrate the security of the Oracle system with the policy agent. Where this gets a little confusing is that one of my developers tells me that this is difficult to implement and that Sun arent planning on supporting the Oracle AS in future.
    What I would like is some clarification from the horses mouth so to speak. In particular is it possible to integrate the policy agent and Oracle AS, and are Sun committed to supporting and developing for this.
    Thanks,
    Andy.

    "Where this gets a little confusing is that one of my developers tells me that this is difficult to implement"
    "it is NOT an implementation but an integration ! difficult ? why ?"
    "and that Sun arent planning on supporting the Oracle AS in future."
    There is a PA 2.2 for Oracle 10g ! It is the latest version(2.2 I mean). I don't see any reasons why Sun should not continue. But it is ONLY my point of view...
    "What I would like is some clarification from the horses mouth so to speak. In particular is it possible to integrate the policy agent and Oracle AS, and are Sun committed to supporting and developing for this."
    Of course it is possible because you can find the PA that will integrate your Oracle AS with a Sun AM.
    1) Please read the documentation.
    http://docs.sun.com/app/docs/coll/1322.1
    Download the one for Oracle and read also the user guide.
    PA are very easy to integrate if you know what you do... Espec. und. the AM auth and sso... If you can be helped by a AM guy from your comp. it is welcome... It is a j2ee agent and of course the PA will make what is necessary to redirect you to AM at login time and later to auth. your request...2)
    2) Download the soft and do the job :-)
    Product Downloads
    Sun Java System Access Manager Policy Agent 2.2 for Oracle Application Server 10g
    http://www.sun.com/download/products.xml?id=455d52ed
    I did plenty of int. with Sun/Bea/Tomcat AS(don't forget there are also webserver agents like Apache PA) with AM and it is not a big deal. Not Oracle, but it is an AS and I don't see why it should be difficult...
    Hope this helps a bit.

  • How to automate checking status of Replication agent and Replication queue in CQ5

    As part of monitoring the status of replication agents and replication queue, is it possible to automate the checking process?
    We can check them from GUI, but from a monitoring perspective we are loking for a mechanism where the status can be checked continuously and we are alerted whenever there is some issue.
    1. Check status of replication agent (enabled/disabled)
    2. Check status of replication queue (if the queue is blocked)
    Thanks in advance
    nkrao

    you can pull the queue from the page the same way the UI gets the list
    in the table:
    curl -u admin:admin
    "http://localhost:4502/etc/replication/agents.author/publish/jcr:content.queue.json?agent=p ublish"
    and then use a shell library like ticktick.sh to parse the json
    response. A sample of how to get the bundles loaded and installed from
    CQ using the ticktick library can be found here
    https://github.com/kristopolous/TickTick
    http://ruben42.wordpress.com/2012/04/24/using-ticktick-sh-to-parse-json-responses-from-ado be-cq5-5/

  • Patchadd and zones??

    I feel dumb asking this question especially since I think its due to my lack of knowledge with zones. I am using Solaris 10 with only a global zone, at least thats what I think? I ran a "zoneadm list" and only listed "global".
    I have downloaded uwc [yes I posted something similar on the JMS forum] patch 118540-42 and have tried to add it with patchadd. I get an error saying " Package SUNWuwc from directory SUNWuwc in patch 118540-42 is not installed on the system" and the patch does not install [I can not see it with showrev -p nor in /var/sadm/patch]. I also tried the "-G" option but no difference.
    Then I tried using Solaris Management Console 2.1 using its patch tool. Action -> add patch and I get an error saying "Some or all of the software packages that patch 118540-42 patches are not installed on the target host.".
    So I decided to look for SUNWuwc with pgkinfo and there is no listing, in fact none of the Java comm suite is found [nor most of the stuff in /opt and /usr/local ]. Yet I know JES is all in /opt and is working fine. I have never created a zone on this system and thought I had installed everything to just a global zone. I have had this system running for over a year and some updates have happened [just not sure what changed].
    So I am wondering is there another way to add patches with Sol 10? another flag or utility? Is there a way to know what zone one is working in? or has installed stuff to. Is there a way at this point to stop using zones altogether?
    Maybe I am missing a Sol 10 patch?
    I had also run into a file /var/sadm/install/gz-only-packages and sure enough all my installed packages were listed here [all the JES stuff and web server etc]. I thought this meant "global zone only" and I only have a global zone??? so why can I not patch??
    Apologies for the confusion [and lack of more details], although I have worked with Solaris for years this new 10 version and zones is a bit confusing for me. Plus the problem might not be zones related at all :^)
    Thanks in Advance
    -James

    try zoneadm list -vc
    this shows all zones on the system, whether they are configured, running or not running.
    Next, try to get the 10-recommended patches from sunsolve.sun.com and add those, but do it in single-user mode.
    /tony

  • Reporting Agent and Download Scheduler

    Hello All,
        I have an issue with the Reporting Agent and Download scheduler.  I am on BW 3.5.  I am not familiar with the setup myself (I inherited it), and I would like some basic information.
       Essentially it was working fine until we added some new settings.  Now, the Download Scheduler freezes mid-run - just stops - and I am guessing this has to do with the new settings that were created (not by me - again, I just inherited all this).
       Any help, suggestions, links to white papers (Google was NOT helpful) anything at all on this ancient technology would be appreciated.
       Thanks.
    Dave

    Hi Nagesh,
    Chech whether the user or role is specified in your web template settings.
    Check this link for further details:
    http://help.sap.com/saphelp_nw04/helpdata/en/4b/ddb057ca3aa447b0d5aff7ea2408d3/frameset.htm
    Regards,
    Prema

  • Agent and Supervisor Desktop Updates

    With version 7.x of UCCX, if we did an update to our UCCX server, the updated agent and supervisor desktops downloaded automatically the next time a user logged on.
    Last night I updated our 8.5.1 server to the latest build.  I went to run the agent and supervisor and it just gave me a message that I had to install the latest version.  It doesnt appear to auto update.  Is there a way to make that work.

    Hi John,
    Did you run the "Cisco Unified CCX Client Configuration tool " after upgrading your UCCX system. If not please run it and relaunch the CAD or CSD, they will get automatically get upgraded.
    Hope this helps.
    Anand
    Please rate helpful posts !!

  • Agent and TNSListener service can not run when system starting

    The Agent and TNSListener services can not run automaticaly when system startes.If run Agent service by hand in control panel,system prompt 3221356559 error message.If run TNSListener service in control panel,system prompt none.But after refresh,TNSListener service is not running.How can i do next?Thanks very much!

    geno.nullfree wrote:
    I'm not sure but since it's saying there's a library issue, you could try running:
    # ldconfig
    Failing that you could try a:
    # pacman -Rns slim
    # pacman -Syu slim
    I tried both "ldconfig" and "pacman -XXX", but the problem is still there.
    Maybe I need use another way to recompile slim in my machine.
    But I have no time to test it now, I will try it another day.
    Thx for replies.

  • Some computers download and install the two approved updates, others only download Windows Update Agent and not the approved updates.

    Some computers download and install the two approved updates, others only download Windows Update Agent and not the approved updates.

    UN-successful Windows Update Log:
    2014-05-07 09:33:56:180
    1036 e70
    Misc ===========  Logging initialized (build: 7.6.7600.256, tz: -0400)  ===========
    2014-05-07 09:33:56:220
    1036 e70
    Misc  = Process: C:\Windows\system32\svchost.exe
    2014-05-07 09:33:56:221
    1036 e70
    Misc  = Module: c:\windows\system32\wuaueng.dll
    2014-05-07 09:33:56:180
    1036 e70
    Service *************
    2014-05-07 09:33:56:221
    1036 e70
    Service ** START **  Service: Service startup
    2014-05-07 09:33:56:222
    1036 e70
    Service *********
    2014-05-07 09:33:56:544
    1036 e70
    Agent  * WU client version 7.6.7600.256
    2014-05-07 09:33:56:545
    1036 e70
    Agent  * Base directory: C:\Windows\SoftwareDistribution
    2014-05-07 09:33:56:546
    1036 e70
    Agent  * Access type: No proxy
    2014-05-07 09:33:56:547
    1036 e70
    Agent  * Network state: Connected
    2014-05-07 09:33:57:315
    1036 e70
    Setup Service restarting after SelfUpdate
    2014-05-07 09:33:57:545
    1036 e70
    Setup Client version: Core: 7.6.7600.256  Aux: 7.6.7600.256
    2014-05-07 09:33:57:592
    1036 e70
    Report CWERReporter::Init succeeded
    2014-05-07 09:33:58:326
    1036 e70
    Report ***********  Report: Initializing static reporting data  ***********
    2014-05-07 09:33:58:376
    1036 e70
    Report  * OS Version = 6.1.7601.1.0.65792
    2014-05-07 09:33:58:376
    1036 e70
    Report  * OS Product Type = 0x00000030
    2014-05-07 09:33:58:394
    1036 e70
    Report  * Computer Brand = Hewlett-Packard
    2014-05-07 09:33:58:444
    1036 e70
    Report  * Computer Model = HP Compaq 4000 Pro SFF PC
    2014-05-07 09:33:58:455
    1036 e70
    Report  * Bios Revision = 786H7 v02.00
    2014-05-07 09:33:58:504
    1036 e70
    Report  * Bios Name = Default System BIOS
    2014-05-07 09:33:58:554
    1036 e70
    Report  * Bios Release Date = 2011-01-31T00:00:00
    2014-05-07 09:33:58:554
    1036 e70
    Report  * Locale ID = 1033
    2014-05-07 09:34:03:562
    1036 f08
    Report REPORT EVENT: {082D455B-6E51-4238-A997-1D27D9214A72}
    2014-05-07 09:33:58:565-0400 1
    199 101
    {0011B9ED-9189-4D58-BE25-FA2F13FC3D6C}
    1 240005
    SelfUpdate Success
    Content Install Installation successful and restart required for the following update: Windows Update Aux
    2014-05-07 09:34:03:614
    1036 f08
    Report CWERReporter finishing event handling. (00000000)
    2014-05-07 09:34:42:049
    1036 e70
    Agent ***********  Agent: Initializing Windows Update Agent  ***********
    2014-05-07 09:34:42:049
    1036 e70
    Agent ***********  Agent: Initializing global settings cache  ***********
    2014-05-07 09:34:42:049
    1036 e70
    Agent  * WSUS server: http://csd26.csd.local:80
    2014-05-07 09:34:42:049
    1036 e70
    Agent  * WSUS status server: http://csd26.csd.local:80
    2014-05-07 09:34:42:049
    1036 e70
    Agent  * Target group: CO
    2014-05-07 09:34:42:049
    1036 e70
    Agent  * Windows Update access disabled: No
    2014-05-07 09:34:42:063
    1036 e70
    DnldMgr Download manager restoring 0 downloads
    2014-05-07 09:34:42:089
    1036 e70
    AU ###########  AU: Initializing Automatic Updates  ###########
    2014-05-07 09:34:42:089
    1036 e70
    AU AU setting next detection timeout to 2014-05-07 13:34:42
    2014-05-07 09:34:42:090
    1036 e70
    AU AU setting next sqm report timeout to 2014-05-07 13:34:42
    2014-05-07 09:34:42:090
    1036 e70
    AU  # WSUS server: http://csd26.csd.local:80
    2014-05-07 09:34:42:090
    1036 e70
    AU  # Detection frequency: 22
    2014-05-07 09:34:42:090
    1036 e70
    AU  # Target group: CO
    2014-05-07 09:34:42:090
    1036 e70
    AU  # Approval type: Scheduled (Policy)
    2014-05-07 09:34:42:090
    1036 e70
    AU  # Scheduled install day/time: Every day at 3:00
    2014-05-07 09:34:42:090
    1036 e70
    AU  # Auto-install minor updates: Yes (User preference)
    2014-05-07 09:34:42:105
    1036 e70
    AU Initializing featured updates
    2014-05-07 09:34:42:116
    1036 e70
    AU Found 0 cached featured updates
    2014-05-07 09:34:42:116
    1036 e70
    AU Successfully wrote event for AU health state:0
    2014-05-07 09:34:42:117
    1036 e70
    AU Successfully wrote event for AU health state:0
    2014-05-07 09:34:42:117
    1036 e70
    AU AU finished delayed initialization
    2014-05-07 09:34:42:117
    1036 e70
    AU AU setting next sqm report timeout to 2014-05-08 13:34:42
    2014-05-07 09:34:42:117
    1036 e70
    AU #############
    2014-05-07 09:34:42:117
    1036 e70
    AU ## START ##  AU: Search for updates
    2014-05-07 09:34:42:117
    1036 e70
    AU #########
    2014-05-07 09:34:42:291
    1036 e70
    AU <<## SUBMITTED ## AU: Search for updates [CallId = {5AA2F00A-8964-4543-A740-EC45C5FD5752}]
    2014-05-07 09:34:42:341
    1036 f08
    Agent *************
    2014-05-07 09:34:42:341
    1036 f08
    Agent ** START **  Agent: Finding updates [CallerId = AutomaticUpdates]
    2014-05-07 09:34:42:341
    1036 f08
    Agent *********
    2014-05-07 09:34:42:341
    1036 f08
    Agent  * Online = Yes; Ignore download priority = No
    2014-05-07 09:34:42:341
    1036 f08
    Agent  * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0
    and DeploymentAction='Uninstallation' and RebootRequired=1"
    2014-05-07 09:34:42:341
    1036 f08
    Agent  * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
    2014-05-07 09:34:42:341
    1036 f08
    Agent  * Search Scope = {Machine}
    2014-05-07 09:34:42:341
    1036 f08
    Setup Checking for agent SelfUpdate
    2014-05-07 09:34:42:342
    1036 f08
    Setup Client version: Core: 7.6.7600.256  Aux: 7.6.7600.256
    2014-05-07 09:34:42:349
    1036 f08
    Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
    2014-05-07 09:34:42:392
    1036 f08
    Misc Microsoft signed: Yes
    2014-05-07 09:34:44:669
    1036 f08
    Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
    2014-05-07 09:34:44:676
    1036 f08
    Misc Microsoft signed: Yes
    2014-05-07 09:34:44:754
    1036 f08
    Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
    2014-05-07 09:34:44:777
    1036 f08
    Misc Microsoft signed: Yes
    2014-05-07 09:34:44:781
    1036 f08
    Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
    2014-05-07 09:34:44:788
    1036 f08
    Misc Microsoft signed: Yes
    2014-05-07 09:34:44:837
    1036 f08
    Setup Determining whether a new setup handler needs to be downloaded
    2014-05-07 09:34:44:855
    1036 f08
    Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\Handler\WuSetupV.exe:
    2014-05-07 09:34:44:862
    1036 f08
    Misc Microsoft signed: Yes
    2014-05-07 09:34:44:862
    1036 f08
    Misc WARNING: Digital Signatures on file C:\Windows\SoftwareDistribution\SelfUpdate\Handler\WuSetupV.exe are not trusted: Error 0x800b0001
    2014-05-07 09:34:44:862
    1036 f08
    Setup WARNING: Trust verification failed for WuSetupV.exe. It will be deleted and downloaded, error = 0x800B0001
    2014-05-07 09:34:44:863
    1036 f08
    Setup SelfUpdate handler update required: Current version: 7.6.7600.256, required version: 7.6.7600.256
    2014-05-07 09:34:44:873
    1036 f08
    Setup Evaluating applicability of setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~x86~~7.6.7600.256"
    2014-05-07 09:34:44:932
    1036 f08
    Setup Setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~x86~~7.6.7600.256" is already installed.
    2014-05-07 09:34:44:933
    1036 f08
    Setup Evaluating applicability of setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~x86~~7.6.7600.256"
    2014-05-07 09:34:45:048
    1036 f08
    Setup Setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~x86~~7.6.7600.256" is already installed.
    2014-05-07 09:34:45:048
    1036 f08
    Setup Evaluating applicability of setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~x86~~7.6.7600.256"
    2014-05-07 09:34:45:234
    1036 f08
    Setup Setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~x86~~7.6.7600.256" is already installed.
    2014-05-07 09:34:45:235
    1036 f08
    Setup SelfUpdate check completed.  SelfUpdate is NOT required.
    2014-05-07 09:34:48:415
    1036 f08
    PT +++++++++++  PT: Synchronizing server updates  +++++++++++
    2014-05-07 09:34:48:415
    1036 f08
    PT  + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL = http://csd26.csd.local:80/ClientWebService/client.asmx
    2014-05-07 09:34:48:424
    1036 f08
    PT WARNING: Cached cookie has expired or new PID is available
    2014-05-07 09:34:48:424
    1036 f08
    PT Initializing simple targeting cookie, clientId = 97287ab2-5824-44d2-bf93-8a98da659f77, target group = CO, DNS name = c18714.csd.local
    2014-05-07 09:34:48:424
    1036 f08
    PT  Server URL = http://csd26.csd.local:80/SimpleAuthWebService/SimpleAuth.asmx
    2014-05-07 09:34:48:454
    1036 f08
    PT WARNING: GetCookie failure, error = 0x8024400D, soap client error = 7, soap error code = 300, HTTP status code = 200
    2014-05-07 09:34:48:454
    1036 f08
    PT WARNING: SOAP Fault: 0x00012c
    2014-05-07 09:34:48:454
    1036 f08
    PT WARNING:     faultstring:Fault occurred
    2014-05-07 09:34:48:454
    1036 f08
    PT WARNING:     ErrorCode:ConfigChanged(2)
    2014-05-07 09:34:48:454
    1036 f08
    PT WARNING:     Message:(null)
    2014-05-07 09:34:48:454
    1036 f08
    PT WARNING:     Method:"http://www.microsoft.com/SoftwareDistribution/Server/ClientWebService/GetCookie"
    2014-05-07 09:34:48:454
    1036 f08
    PT WARNING:     ID:cb5babad-3a1d-4e6b-946e-736ed4746e3f
    2014-05-07 09:34:48:464
    1036 f08
    PT WARNING: Cached cookie has expired or new PID is available
    2014-05-07 09:34:48:464
    1036 f08
    PT Initializing simple targeting cookie, clientId = 97287ab2-5824-44d2-bf93-8a98da659f77, target group = CO, DNS name = c18714.csd.local
    2014-05-07 09:34:48:464
    1036 f08
    PT  Server URL = http://csd26.csd.local:80/SimpleAuthWebService/SimpleAuth.asmx
    2014-05-07 09:35:06:497
    1036 e70
    AU Forced install timer expired for scheduled install
    2014-05-07 09:35:06:497
    1036 e70
    AU UpdateDownloadProperties: 0 download(s) are still in progress.
    2014-05-07 09:35:06:497
    1036 e70
    AU Setting AU scheduled install time to 2014-05-08 07:00:00
    2014-05-07 09:35:06:498
    1036 e70
    AU Successfully wrote event for AU health state:0
    2014-05-07 09:35:14:236
    1036 f08
    PT +++++++++++  PT: Synchronizing extended update info  +++++++++++
    2014-05-07 09:35:14:236
    1036 f08
    PT  + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL = http://csd26.csd.local:80/ClientWebService/client.asmx
    2014-05-07 09:35:20:118
    1036 f08
    Agent  * Found 0 updates and 79 categories in search; evaluated appl. rules of 859 out of 1494 deployed entities
    2014-05-07 09:35:20:194
    1036 f08
    Agent *********
    2014-05-07 09:35:20:194
    1036 f08
    Agent **  END  **  Agent: Finding updates [CallerId = AutomaticUpdates]
    2014-05-07 09:35:20:194
    1036 f08
    Agent *************
    2014-05-07 09:35:20:209
    1036 f08
    Report CWERReporter finishing event handling. (00000000)
    2014-05-07 09:35:20:209
    1036 f08
    Report CWERReporter finishing event handling. (00000000)
    2014-05-07 09:35:20:209
    1036 bb8
    AU >>##  RESUMED  ## AU: Search for updates [CallId = {5AA2F00A-8964-4543-A740-EC45C5FD5752}]
    2014-05-07 09:35:20:209
    1036 bb8
    AU  # 0 updates detected
    2014-05-07 09:35:20:209
    1036 bb8
    AU #########
    2014-05-07 09:35:20:209
    1036 bb8
    AU ##  END  ##  AU: Search for updates [CallId = {5AA2F00A-8964-4543-A740-EC45C5FD5752}]
    2014-05-07 09:35:20:209
    1036 bb8
    AU #############
    2014-05-07 09:35:20:210
    1036 bb8
    AU Successfully wrote event for AU health state:0
    2014-05-07 09:35:20:210
    1036 bb8
    AU Featured notifications is disabled.
    2014-05-07 09:35:20:211
    1036 bb8
    AU AU setting next detection timeout to 2014-05-08 11:19:46
    2014-05-07 09:35:20:211
    1036 bb8
    AU Setting AU scheduled install time to 2014-05-08 07:00:00
    2014-05-07 09:35:20:212
    1036 bb8
    AU Successfully wrote event for AU health state:0
    2014-05-07 09:35:20:212
    1036 bb8
    AU Successfully wrote event for AU health state:0
    2014-05-07 09:35:25:183
    1036 f08
    Report REPORT EVENT: {C1B39107-F517-4477-AAE3-9B1F1D6002BF}
    2014-05-07 09:35:20:193-0400 1
    147 101
    {00000000-0000-0000-0000-000000000000}
    0 0 AutomaticUpdates
    Success Software Synchronization
    Windows Update Client successfully detected 0 updates.
    2014-05-07 09:35:25:183
    1036 f08
    Report REPORT EVENT: {669B9537-BB71-4190-BA58-A97F725AE4D8}
    2014-05-07 09:35:20:194-0400 1
    156 101
    {00000000-0000-0000-0000-000000000000}
    0 0 AutomaticUpdates
    Success Pre-Deployment Check
    Reporting client status.
    2014-05-07 09:35:25:184
    1036 f08
    Report CWERReporter finishing event handling. (00000000)
    2014-05-07 09:37:32:440
    1036 f08
    Report Uploading 3 events using cached cookie, reporting URL = http://csd26.csd.local:80/ReportingWebService/ReportingWebService.asmx
    2014-05-07 09:37:32:454
    1036 f08
    Report Reporter successfully uploaded 3 events.

Maybe you are looking for

  • [SOLVED] KDE: usb automount puzzle

    Hi, I've got two Arch KDE boxes. One of them runs fine, on another I can mount any usb device no longer. $ lsusb Bus 002 Device 008: ID 04e8:342c Samsung Electronics Co., Ltd Bus 002 Device 010: ID 13fe:3e00 Kingston Technology Company Inc. Flash Dri

  • Problem in Procedure compilation

    CREATE OR REPLACE PROCEDURE leave_emp (p_id IN employees.employee_id%TYPE) IS BEGIN DELETE FROM employees WHERE employee_id = p_id; log_execution; END leave_emp; While i am compiling the above procedure, i got the below error: CREATE OR REPLACE PROCE

  • Generating a different sequence for 32 different  warehouse....!!!!

    We have got around 32 different warehouse where various material are stored...... I have to design a form in such a way that i generate a different sequence number for the materials stored in 32 different ware house ex name:suhail pwd:123 warehouse:

  • Why won't my 4S open jpg images in email?

    A friend emails me images on my phone as JPGs, but they won't open on my 4S.  They open just fine on my desktop. I can't find anything in settings that would be preventing it.  Thanks.

  • Ie sucked, firefox 4 sucks, pluigin-container.exe sucks, chrome?

    i used ie7 ie8 then turned to firefox 3.xx and saw the light. frefox 4.xx im back in the darkness. windows explorer firefox.exe plugin-container.exe everthing hangs cpu is at 100% if i kill firefox.exe process the plugin-container.exe procerss dies a