Supervisor Desktop - Real time status shows the deleted agents

Hi All,
Recently we modified only the agent IDs for few agents.In ICM we just edited the previous entry. We have not deleted and re created it. Now the problem is the in "Supervisor Desktop - Real time status" the old entries are also reflecting in logout state. Exit_OPC will help us to remove this stale values. But is there any other metheod to to achieve this without impacting the production?
Regards,
Adithya

Hi David,
Thanks for your response. We cannot reinstall the Supervisor desktop there are multiple supervisors for this team. Will wait and check if the stale entry goes automatically. Please let me know if u come across any other process which will help in doing this.
Regards,
Adithya

Similar Messages

  • CAD Real Time Stats show NA for agent state and call log

    Hello
    For our lab uccx, the agent/users CAD display shows NA for the agent state and call log.  I have
    Not Ready and Log out codes set and have the testers do those actions to generate data.
    I have rebooted the server and have also checked the services page and confirmed
    all the services are running.
    I went through the admin guide to see if I missed any configuration but does not appear so.
    I tried launching the real time stats tool from the UCCX Admin and it launches OK
    but I noticed that it shows not connected.
    Note this is over a VPN to the UCCX.
    So not sure if this is related.  I checked the relase notes and this is the base install
    of UCCX 8.5.  I am going to install the service updates but wanted to see if I can
    get this running before I schedule a maint window to do the upgrades.
    Thanks
    Mike Kana

    Hi
    you might be facing an issue where " uccxcaduser password" gets corrupted , which leads to the issue you are facing right now
    you have to contact TAC to reset that password for you and your issue will be fixed ,100%
    Note : Only TAC can reset this password

  • Skill Group Name is not coming on Cisco CTI Tool Kit real time status

    Hi,
    I have UCCE 9.0.3 in my environment but when supervisor is monitoring agent state on CTI Toolkit Team Real Time Status we are not able to see Skill Group name.
    For your reference I have enclosed screen shot of that.

    Hi,
    first, read this document: Recommended Tracing Levels for Troubleshooting IPCC Issues. Apply the recommended trace levels to the following services:
    CTI OS Server
    CTI Server
    But first take note of the original values (so you can switch back to normal tracing).
    Dump the logs for both the above services: How to Use the Dumplog Utility.
    For instance: dumplog ctisvr /hr 1 /of c:\temp\ctisvr.log
    Post the logs to here.
    G.

  • DTP Born with Incorrect Real-Time Status

    Hi Gurus,
    What am I doing wrong? When I create a DTP for Real-Time Acquisition, I am getting "Real-Time Status" as "Incorrect" even with a DTP Type correctly set for Real-Time. I have no option to change it for following status:
    - New, Without Data Package
    - Ready
    - Transport Package Read
    - Transport Package
    - New Transport Package to be Deleted
    - Stopped
    - Active
    - DTP/Infopackage to be closed
    I am having quiet few problems to set up DTP with Real-Time Data Acquisition.
    Kind Regards,
    Gilson

    Hi
    Not a Guru ,but wanna give it a shot..
    <b>Prerequisites for creating Infopackages</b> -
    Check
    1)The DataSource for which you want to create an InfoPackage supports real-time data acquisition.
    2)If you are transferring data into BI using the service API, you have already created an InfoPackage for initializing the delta process for this DataSource, and have completed the initialization.
    <b>
    Closing Requests in the Monitor for Real-Time Data Acquisition</b>
    <b>Prerequisites</b>
    The daemon is inactive or has errors.
    <b>Procedure</b>
    In the context menu of the PSA or DTP request, choose Close Request
    Barring all those steps mentioned above if I copy you properly ,I put 2 cents on the authorization issue related to RDA.
    Check OSS note- 943898
    IF at all the note applies to you ,since the patch is not released ,have to go ahead with correction instruction.
    Hope it Helps
    Chetan
    @CP..

  • Desktop Real Time on Intel NUC?

    I'm exploring small form factors to run RTOS, but don't have the need for FPGA (i.e. CPU only).  Just curious if anyone has tried to install LabView Desktop Real Time on any of the new Intel NUC SFF-PCs, such as the DN2820FYKH?  If so, are all the necessary devices (especially ethernet) supported?  Thanks.
    -Joe

    Joe,
       I'm trying to do this same thing - Building the world's smallest NI RealTime System using the Intel NUC - D54250WYKH.
       Its been an uphill battle...
       The compatibility list states the 4th generation Intel processors (in my case, an i5) in this unit is supported, but in the next month or two Intel will be releasing the the 5th generation which is currently not on the compatibility list..
       Anyone from NI care to tell us when this might happen? 
       My troubles have been around the ethernet port. The D54250WYKH has only 1 ethernet port and its the l218V chipset - This chipset is not on the currently supported list..
       Once again, Anyone from NI care to tell us when this might happen? 
       I actually need 2 ethernet ports for my application on the NUC, but have been having a terrible time finding an ethernet expansion card for the miniPXIe expansion ports that use the supported chipsets. I found 1, but it doesn't work even though it passes the "NI PC RT Evaluator" software test...   
       I'm now looking at an adaptor that converts the miniPCIe port back to the PCI format. I give this about a 50% chance of working... It's due to be delivered this Friday...
       Does any know of a PCI card that is supported by NI RealTime with 2 ethernet ports?
    Barty

  • About a month ago a song randomly appeared in my songs list and when I tried swiping to the left to delete the song it wouldn't slide over to show the delete button. The delete slide appears with all of my other songs except that one. P.S. iCloud is off.

    About a month ago a song randomly appeared in my songs list and when I tried swiping to the left to delete the song it wouldn't slide over to show the delete button. The delete slide appears with all of my other songs except that one. The ICloud songs are turned off and it wasn't iTunes Radio. 2 more songs like this have appeared and I can't delete them from both my iPhone or my computer (they don't even show up on my computer). If somebody knows how to fix this that would be amazing! Thank You.

    Have you:
    - Restore from backup. See:                                                
    iOS: Back up and restore your iOS device with iCloud or iTunes
      - Restore to factory settings/new iOS device.            
    If a PC
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

  • Every time I press the delete tab in Safari it either returns to my previous web page or crashes? Drivinh me nuts!

    Every time I press the delete tab in Safari it either returns to my previous web page or crashes?

    Launch the Console application by entering the first few letters of its name into a Spotlight search. If that doesn’t work, then in the Finder, press the key combination shift-command-U. The application is in the folder that opens.
    Look under User Diagnostic Reports for crash logs related to Safari, WebProcess, or PluginProcess. Select the most recent one of each and post the contents -- the text, please, not a screenshot. For privacy’s sake, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.)

  • HDS Real time tables shows negetive figures

    cisco real time tables throwing  strange number(figure)  for offered calls every
    mid night between 00:00 and 00:05. (Table name Call_type_real_Time)
    Kindly note we have problem with the real time data in the CISCO database, it gives number of calls received in negative figures during early
    hours of the day .Appreciate to comment  if any one comes across the same ? Any suggesion

    our set up (version) as follows
    ICM 7.0_SR4;CTIOS7.0(0)SR2& ES13/ES25
    CCM4.1(3)SR4d
    CVP3.1(0),SR2 & ES3

  • My creative cloud desktop app does not show the programmes installed

    My creative cloud desktop app does not show the programmes installed so I cant update lightroom or any other programme, have unistalled and reinstalled but no change

    Hi Roni-
    If you updated the desktop installer and the screen is blank: try this:
    Rename the opm.db file.
    Close the Creative Cloud application if it's running.
    Navigate to the OOBE folder.
    Windows: [System drive]:\Users\[username]\AppData\Local\Adobe\OOBE
    Mac OS: /User/<username>/Library/Application Support/Adobe/OOBE folder
    Rename the opm.db file to opm_old.db
    Launch Creative Cloud
    (help finding hidden files on mac:http://helpx.adobe.com/x-productkb/global/access-hidden-user-library-files.html.)

  • In deleting an i message  the previous message remains on the screen but with the time stamp of the deleted message . how do i fix this?

    in deleting an i message  the previous message remains on the screen but with the time stamp of the deleted message . how do i fix this?

    Hey everyone in Apple world!
    I figured out how to fix the flashing yellow screen problem that I've been having on my MBP!  Yessssss!!!
    I found this super handy website with the golden answer: http://support.apple.com/kb/HT1379
    I followed the instructions on this page and here's what I did:
    Resetting NVRAM / PRAM
    Shut down your Mac.
    Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.
    I went through the 6 steps above twice, just to make sure I got rid of whatever stuff was holding up my bootup process.  Since I did that, my MBP boots up just like normal.  No flashing yellow screen anymore!!   
    (Note that I arrived at this solution when I first saw this page: http://support.apple.com/kb/TS2570?viewlocale=en_US)
    Let me know if this works for you!
    Elaine

  • Multi-camera real-time editing skips the main video window ahead about a minute since update.

    I'm working on a 2-camera edit, which I've done numerous multi-camera edits on this machine before with no problem, but now when I am playing back the footage with the multi-camera window and select the other camera, the footage in the main window (the one that shows the footage going on the timeline) jumps ahead about a minute.  It doesn't matter which camera is choosen, it causes either to jump ahead about a minute in that main window making it almost impossible to edit.
    The footage doesn't jump ahead in the smaller, individual camera windows on the left, just the main window.  I'm not 100% sure, but I believe this problem just started occuring since the most recent update to Premiere Pro CC.  I installed that update last night and wasn't having this problem prior to that.
    How can I remove the most recent update to test this theory?
    Specs:
    Premiere Pro CC 7.2.0 (46)
    Win 7 64-bit
    2x NVidia GTX 560 Ti
    16GB RAM
    120GB SSD (OS)
    2TB RAID 0 (Storage)

    Kendall,
    Great video showing exactly what you're experiencing.  Thanks!  Wow, something definitely seems severely wrong when nothing has changed on your machine except the version of PPr.  Just a couple random thoughts (that probably won't make a difference):
    1. Are you using Multi-cam Clips (i.e. created the way most Adobe tutorials teach you to create them), or are you using a Nested Sequence with Multi-cam Enabled (i.e. the way most on this forum would recommend)?
    2. Does life get better when you exit Dropbox completely (or if you uninstall it)?
    3. Do you have other items, like Dropbox, running?  Close them all?
    4. Does the same thing happen with different kinds of footage formats?
    5. What version of Anti-virus?  Try turning it completely off?
    Again, you've probably considered the last two, but if not, it's the first thing I might try.
    For what it's worth, I'm running CC 7.1 on Windows 7 64-bit and I'm not experiencing this issue.  Not that it's ideal, but I performed the same test you show above while I was running Microsoft Outlook (a few emails open and 3 reminders), Chrome (about 15 instances with 2 or 3 tabs each).  Also, background programs running:  Microsoft OneNote (desktop version), Bluetooth and WiFi running, Spyder3 monitor calibration utility, CineForm Status viewer (a constantly running service of GoPro Studio) and Webroot Secure Anywhere.  Even under these quick and dirty testing conditions, multi-cam is working great for me in 7.1 (I use Nested Sequences; not Multicam-clips).  I had a real problem back in July/August that may have been brought about by using Multi-cam clips.  I switched to using Nested Sequences, instead, and I haven't had that type of issue since.
    I hope there is something helpful for you in all of that.
    Best luck!

  • UCCX 10.5 Real Time Report shows "Not Connected"

    Hi,
    UCCX 10.5 HA over LAN.
    As per the title, RTR shows Not connected for both nodes and no data shown for all reports. all services are In service in both nodes. 
    Any Ideas?
    Regards.

    Hi Mohamed,
    Are you accessing this via the IE or FF? If so which version?
    The Real time reporting on UCCX connects to the RMI port 6999 to pull the information on the Engine. If there are no port blockages or if there are no issues with the browsers, then it is a problem with the configuration files in root holding this information which needs in depth analysis.
    A restart of the Engine also should help. I know that everything is IN SERVICE, but I have noticed a lot of issues on UCCX 10.5 when there are stuck calls on the system, it impacts RTR with the midnight stats reset.
    The reset of the Engine is bound to clear all the stuck calls in the system and this may be a side effect of the stuck calls on the system especially if the RTR was working before you noticed the problems.
    Regards,
    Arundeep

  • Execute a VO '4' times and show the result in single table at once.

    Hi,
    I want to execute single a VO query multiple times with different parameters and show the results together in a Table at once
    In Detail
    I have a table to which is associated with a VO.
    The VO contains SQL whose WhereClauseParameters need to be dynamically binded.say headerId and lineId
    Select ... from ....where headerId = :1 AND lineId = :2
    I have to pass these 4 values and show all the results in a single table
    headerId lineid
    H1 ............... L1
    H1 ............... L2
    H2 ............... L1
    H2 ............... L2
    I understand that i need to bind parameters dynamically and exceute the VO.
    As i have 4 different set of parameters, the view object will be executed 4 times.
    I want to show all the results together in a single table.
    How can I do it.
    thanks,
    Gowtam

    Hi Mani,
    Thanks a lot for the patience and detailed solution.I will try it out and tell you the status.
    Meanwhile, I have 2 questions on this solution(just curious)
    I will give you the snapshot of the table
    Table - ModelInfo
    Model......Tube..... Float....Size......Col5.....Col6.......Col7.......
    M1............T1.......... F1. .....1..........C15......C16.....C17.....
    M1............T1...........F1.......2..........C25......C26.....C27.....
    M1............T2......... .F2.......1..........C35......C36.....C37.....
    M1............T2...........F2.......2..........C45......C46.....C47.....
    M2............T1.......... F1. .....1..........
    M2.............T1..........F1.....2.........Cn5.......Cn6........Cn7
    .<continues...>
    .<till>
    .Mn............Tn..........Fn.......n........Cxy.......Cpq.......Crs....
    Question 1:
    if you notice this data,
    The Columns 5 to 7 are dependent on Combination of Model,Tube,Float and Size.
    Hence will this query work properly(without mixing up data from other Pk combination) and will it be efficient?(I Know this is a stupid qst, still double checking..As your solution assumes that each row is unique for Model only..which is not true)
    Select ...From....Where
    Model in(M1,M2,..Mn) AND Tube in(T1,T2..Tn) AND Float in(F1,F2,....Fn) and Size in(1,2...n).
    In short, will C15,C16 and C17 appear only with M1,T1,F1,1..I believe it will.
    Question 2:
    As I told,
    Third party program will return Array of Objects.
    Each object will have a variable called Flow along with
    Model,Tube,Float and Size.
    Flow is not stored in the database(can not be stored due to functional reasons).I want to show this Flow also along with other columns fetched from the DB for all 100+ rows.
    How can I do it?
    I will give u the scenario(with just 2 rows)...please check(Flow is not stored in DB)
    Third Party object : ObjModel
    Model......Tube..... Float....Size......Flow
    M1............T1.......... F1. .....1..........100
    M1............T1...........F2.......2...........200.
    M1............T2.......... F1.......1..........300
    M1............T2...........F2.......2..........400
    My concern is,
    After the VO executes and shows other 6 columns, it should show Flow appropriately.(associated with each object in the array)
    I understand that I need to have a Transient attribute in VO called[b] Flow.But I don't know how to perform the two tasks simultaneously..
    Task1:Your solution on showing table columns
    Task2:Showing Transient data for each object returned from program.
    thanks,
    Gowtam

  • Agent Real Time Status Events

    In my environment we are having a Avaya definity setup having a AES and CMS setup.
    ICM receives real time Agent Status from CMS and Call status report from AES.
    Whenever I check the Agent status in Procmon PIM I can see the realtime agent status.
    However when I check the PIM logs I see the HashIn records and setLogOn records every 10 seconds interval.
    In CTI we receive the Agent State Event every 10 seconds.
    My question is which events from AES/CMS update the realtime status to ICM.
    The updates that I see HashIn/SetLogOn/AgentState events is it dependent on CMSRefreshRate as its set to 10 seconds.               
    Thanks
    Alok

    Is this happening to multiple agents or just one?
    david

  • BB Desktop Software 610_b038 only shows the borders of the windows

    Hi after upgrading to the last version of de Desktop Software, the Windows doesn't seem to appear. I only see the main frames of the windows, but everything inside it's transparent. the software seems to work, because it's detecting the device, connecting, pop up some windows for some confirmation, but I don't see anything at all but the borders of the Desktop.
    Any ideas what can be doing this ?

      Yes I actually only set up the back up for one user and that's the one I cannot see the status of the back up or further documentation.  I accidently logged on as the second user and that's how I saw the screen looked different showing status etc.  In fact for the second user I didn't select ENABLE back up, but that's the user it appears to be running correctl on Screenshot 1 is the user I set up the back up for and screenshot 2 is the user I didn't.  Data and status of a runing back up show on user 2 but not user 1.      

Maybe you are looking for