Support pack roll back

Hello All,
We have had problems with SP14 regarding web dynpro. We are now trying to get back to SP12 ( the one we were on before we upgraded to SP14). What is the easiest way to roll back a patch?
Thanks

Hi Vijay,
first, what problems do you have? Did you upgrade your NWDS to SPS14 (2.0.14), too, and redploy the WebDynpro projects based on this NWDS version?!
Second, I don't think that there's an official "rollback". The best "rollback practice" is to have a backup of your system before upgrading (that should be done in general). SAPINST in the background will use SDM to deploy everything (I think), but I don't know if it's possible to have it working with the setting "deploy even if the to be deployed version is older than the already deployed one" (sounds a bit different, but at the moment I don't have a SDM in front of me).
Third, eventualls you should open an OSS message with the detailed problem description (if my "first" hint didn't help). Maybe there are workarounds provided by SAP, at least errors could be killed in later versions...
Hope it helps
Detlev

Similar Messages

Roll Back Support Packs

HI Experts,
I have applied add-on ST and I want delete it. As of I know I think some of the things needs to be deleted from on table PAT01, PAT03 AND TEPSIN. Unfortunately, I have never done it. So, Can any one help me regarding this with some helpful steps?
Thanks,
I will reward points

Hi Afi,
With the Support Pack, many objects have been updated or added.
I assume, that there is no easy way to delete an already implemented support package.
If it's required, I assume, that you need make a point in time recovery.
Why do you want the delete the support pack?
Best regards,
Ruediger

I have rolled back to firefox v3.6.19 as v5 does not support 'no script', 'download status bar', or 'forecastfox', or at least i was unable to get them to work. v5 is no good imo.

For the second time in as many months I have had to roll back to version 3.6.19 as the new firefox (versions 4 or 5) was unable to use 'no script', 'forecastfox' or 'download status bar'. I hope mozilla will continue to support v3.6.19 until my issues have been resolved. Also the after one or two clicks on any of the aforementioned extensions on the add-on bar/page caused v5 to hang.

Create a new profile as a test to check if your current profile is causing the problems.
See Basic Troubleshooting: Make a new profile:
*https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Twonkybeam is not supported - how can I roll back to version 6?

I use TWONKYBEAM for tv streaming to my WD player - Firefox 7 doesnt support it - how can I roll back to Firefox 6?

Downgrading the iOS is not supported at all.

After downloading service pack 1 for Windows 7 Firefox did not respond anymore (I got the startscreen, but could not do anything, it "hang"), after a roll back Firefox did work again: are Firefox and SP1 incompatible?

After implementing SP1 for Windows 7 Firefox "hang"(I got the startscreen, but could not do anything: no response). After a roll back removing SP1 Firefox works again.
I installed SP1 also some months ago and had the same problems, also then this was solved also by a roll back removing SP1.
Does Firefox have problems in combination with SP1? How to solve this? Thanks.

Followed the given advice: installed SP1 again, ran Firefox in safemode, disabled other running programs as mutorrent, still Firefox didnt work. I had internetconnection (after restarting mutorrent this did work, the app telling me what the weather outside is worked) but no Firefox: as previous time I got the start screen, but could not browse the internet.
I also tried to start the Internet Explorer and it also looked as if that application had problems (but that can also be because I did not use it for a while - old version or whatever - and it is not my standard browser).
Have again performed a roll back in order to remove SP1, now Firefox works again.
If somebody has advice it would be very welcome!

Photoshop Elements/Premiere 9 OEM Bundle not installing. Rolls back at end

I have a toshiba satellite T135 with AMD Turion Neo X2 Dual Core processor L625, 4 GB RAM, ATI Radeon HD 3200 graphics operating on Windows 7 64 bit Home Premium edition.
I am trying to install adobe photoshop elements 9 and adobe premiere elements 9. It gets to the end where it is almost done. Icon on desktop, and then it decides to rollback the installation. I tried many of the suggestions on this forum: copied disc info to folder on c drive. Started with a clean boot. That actually made it worse because it also caused the computer to blue screen.
Here are come windows errors that pop up at the end:
prior to clean boot installation:
Files that help describe the problem:
C:\Users\Sara\AppData\Local\Temp\WERDE2B.tmp.WERInternalMetadata.xml
C:\Users\Sara\AppData\Local\Temp\WERF841.tmp.appcompat.txt
C:\Users\Sara\AppData\Local\Temp\WERFB5D.tmp.WERDataCollectionFailure.txt
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\windows\system32\en-US\erofflps.txt
Post clean boot installation:
Problem signature:
Problem Event Name:                        BlueScreen
OS Version:                                          6.1.7600.2.0.0.768.3
Locale ID:                                             1033
Additional information about the problem:
BCCode:                                               1000007e
BCP1:                                                    FFFFFFFFC0000005
BCP2:                                                    FFFFF80002CD3670
BCP3:                                                    FFFFF88002FD37F8
BCP4:                                                    FFFFF88002FD3060
OS Version:                                          6_1_7600
Service Pack:                                       0_0
Product:                                               768_1
Files that help describe the problem:
C:\Windows\Minidump\031611-44912-01.dmp
C:\Users\Sara\AppData\Local\Temp\WER-103569-0.sysdata.xml
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\windows\system32\en-US\erofflps.txt
Please help me get this software installed. Frustrating that a legit well known piece of software has so many problems just getting installed.

I am trying to install a new purchased version of PSE 9 and havin the same issues. It simply rolls back when near the end of the installation process.   I am on hold with phone support now, but from the sounds of things here on this forum, Adobe is aware of the issue but has no suggestions to fix it.
This is the first time in my life that I have had issues with installing a new, purchased piece of software.
C'mon Adobe Support, time to answer us on this and get it solved, or perhaps you would offer us refunds?

Roll back for GW 8.0.3

Good morning,
When updating to GroupWise 8.0.3, my customer raised the question/concern about roll back to the GroupWise 8.0.2 HP3 in case something goes wrong. Are there any options to do so in 8.0.3? This is a cluster environment, SLES10SP4/OES2SP3 GroupWise 8.0.2 HP3, I assume that on the Nodes where the agents run, we could simply move a PO to a Node that has not yet been updated, however; what happens with the Primary Domain if something goes wrong.
Thank you ahead of time.

* dschaldenovell,
it's just a service pack, so you could manually downgrade the RPMs and that's it. But to be honest, I wouldn't expect any problems, and if, Novell support should be able to resolve them quickly.
Uwe
Novell Knowledge Partner (NKP)
Please don't send me support related e-mail unless I ask you to do so.

SAP Kernel patch/Support pack Sequence

Hi,
I wanted to know if i need to follow up any order in applying latest kernel patch & Support Pack.
I have installed WAS 6.40 SR1 & want to upgrade to SPS 16. Before applying support pack do i need to apply latest
kernel ?
Is there any side effects for applying latest kernel patch ?
Kindly help me
Thanks,
ramki

Ramki, as other posts say the kernel update is part of SPS16 & should always be applied. But as to the order... it will most likely come down to business requirements and preference & may change for you from stack to stack.
Be sure to test first in your DEV environment (or similar) & always check the known issues notes which should tell you any patch to kernel dependancies that may dictate what order you have to install things (782140 is the note for WAS6.20, sorry don't have the WAS640 note number handy).
In terms of side effects? In my experience (4.0b - ecc6) the kernel will either work or not work (ie system will or wont start!) If it dosn't work roll back to the previous version (also keep a copy of the exe directory!) & things should all be OK.
Generally we always apply the kernel after the patches where I work (just fits in better with managing downtime on prod systems). However last time we patched the SPAM queue we defined was very large & not compatible with our R3Trans release when using the downtime minimised option (this was stated in the known issues note I mentioned earlier). So the kernel update was done 2-3 weeks before we rolled the patches in, once again just to manage prod system downtime better.
Hope that helps a little
Danny

Doing a Roll Back for Transport Request

Hi,
I have a situation where I wanted to bring all of my objects (IDoc Type, Message Type etc...) under single request but when I did that, I am unable to test my Inbound Function Module (Custom). It gives me an error saying "Interface for this function module is incorrect". But before changing the transport request, everything was working fine.
So, can somebody tell me how to roll back the changes done in Transport Organizer?
Thanks,
Venkat.

* dschaldenovell,
it's just a service pack, so you could manually downgrade the RPMs and that's it. But to be honest, I wouldn't expect any problems, and if, Novell support should be able to resolve them quickly.
Uwe
Novell Knowledge Partner (NKP)
Please don't send me support related e-mail unless I ask you to do so.

Apple Mobile Device Service installation rolls back

Hey there,
I've been having problems installing iTunes 9 or even 8 on my computer. While running the iTunes setup, part of the installation rolls back and when I launch iTunes after that, I get the message saying that
"This iPod cannot be used because the required software is not installed. Run iTunes installer to remove iTunes, then install iTunes again."
However, the installation doesn't work no matter how many times i reinstall it. I've fully uninstalled everything related to apple and used the microsoft's utility to check if they were properly uninstalled before reinstalling itunes, but I still got the same message.
I found out that Apple Mobile Device Service was not installed and that was the problem. When i extracted AppleMobileDeviceService.msi from the iTunes installer and ran it, it rolled back too. So I used the /l*v command to create an installation log and this is the error.
DIFXAPP: INFO: opening HKEY_USERS 'S-1-5-21-4128058654-1677487342-2165978628-1007\Software\Microsoft\Windows\Curr entVersion\DIFxApp\Components\{9AA3828A-F852-11DB-8E29-6C6B55D89593}' (User's SID: 'S-1-5-21-4128058654-1677487342-2165978628-1007') ...
DIFXAPP: INFO: ENTER: DriverPackageInstallW
DIFXAPP: INFO: usbaapl.inf: checking signature with catalog 'C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers\USBAAPL.CAT' ...
DIFXAPP: INFO: Driver package 'usbaapl.inf' is WHQL signed.
DIFXAPP: ERROR: Create Driver Store entry failed. (Error code 0x6E: The system cannot open the device or file specified.)
DIFXAPP: INFO: Successfully removed '{9AA3828A-F852-11DB-8E29-6C6B55D89593}' from reference list of driver store entry ''
DIFXAPP: INFO: RETURN: DriverPackageInstallW (0x52)
DIFXAPP: ERROR encountered while installing driver package C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers\usbaapl.inf
DIFXAPP: InstallDriverPackages failed with error 0x52
DIFXAPP: RETURN: InstallDriverPackages() 82 (0x52)
Action ended 17:15:17: InstallFinalize. Return value 3.
Can anyone help me please? Any help will be appreciated =P
Cheers

I have recently been fighting my system to get itunes to recognise my iphone and i ran into a similar problem.
I couldnt uninstall the old version of apple mobile device support, and installing the new itunes over the top did not seem to help either.
But i found a work around.
Try opening the itunes.exe install package with winrar. (www.winrar.com, its a free program) and then extracting only the applemobiledevicesupport.exe file.
Reboot your system, run that file and then reboot again.
It should work.
If it doesnt, then good luck to you :P
-Adam

Glitches in address fill-ins with nicknames; default font problem; plus other glitches in Thunderbird 31.3.0 and 31.4.0; can I roll back to an earlier version?

I am unhappy with the recent upgrade to Thunderbird 31.3.0 and now 31.4.0. My bottom line question is whether I can roll back to the previous version, which was working well for me.
The problems I have encountered include:
1. I used to be able to enter a single letter in many cases in the address field, and the autocomplete would fill in the entry that I always use with that single letter. That function has been lost, as has auto fill-in based on the nicknames I have entered in my Address Book. I see there is another thread on this problem (https://support.mozilla.org/en-US/questions/1036962), but no satisfactory answer so far. Entering a single letter now pulls up completely unrelated address entries that may not even have that letter as part of the name, address or nickname for that unrelated address. I have created new nicknames to try to adapt to this problem, but even these new nicknames no longer work with the 31.4.0 upgrade yesterday, forcing me to create yet more complex and hard-to-remember nicknames to pull up my frequent addressees. This is all very frustrating to me, as I depend on speed and ease when creating messages.
2. Also, I used to be able to enter a single letter in the address field and then use the mouse to click on the "To:" symbol to the left of the next address line to change the next entry to "Cc:"; doing so would then cause the complete address to fill in in the "To:" address field, and make the next field ready for an entry. That no longer works. If I use that technique, the shortcut that I entered in the first field gets included along with the address (if I'm lucky enough to have the address itself selected now, given the problems I've mentioned above). I now have to press "Enter" in order to get the address in the first field to "take" correctly, and then have to click on the "To:" symbol for the next line as a separate action. Just another inconvenience with the new version.
3. While still on the subject of addresses, personally I see no reason why the address and subject fields should now be colored blue by default rather than appearing as blank, white fields. I far prefer the old look. And I suspect that changing from the blue color to a nice, clean, white field takes time and computer resources that slow things down.
4. The default font (Times in my case) no longer "takes" when replying to or forwarding messages. I've checked Tools/Options/Composition, and Times is still shown as my default font. However, when I start to type (in a reply with the original message quoted or in a forwarded message), the result is "Variable Width". In order to get Times, I need to highlight the block of text after typing, including the lead-in to the quoted message or the header of the forwarded message, and select "Times" when "(mixed)" shows up. This is a big pain; I often forget to do so and end up having to edit the Unsent Message (which I check before sending) as New and correct the font.
5. A minor problem: I rely on the reminder to attach a message which shows up when an "attachment-related" word is entered in the body of the message. It has been a wonderful feature of Thunderbird that has prevented me on many occasions from sending off messages without the attachments. However, in the new versions, even if I have indeed added the attachment, a pop-up comes up on sending the message saying there has been no attachment and asking if I want to add one. It's easy enough to just click "No", but it's yet one more unnecessary and distracting step that this new version is requiring of the user.
I'm really sad to see these various changes/glitches. I love Thunderbird and it bothers me deeply to find myself mired in so many new problems that slow down my work. I would be grateful for any suggestions and advice, and, particularly, for any information as whether I can roll back to the version prior to 31.3.0 that was working well for me.

Thank you, Zenos. I tried rolling back to v31.2.0, since I had not encountered problems prior to December. However, that didn't help. So I followed your valuable suggestion to revert to v24.6; that seems to have done the trick.
I would like to mark this problem as "Solved" -- the rollback seems to have worked. However, since my original post was a complex mix of things, before I do that, should I post the individual problem sets that I had noted (address fields/nicknames problems -- numbers 1-3; default font problem -- number 4; attachment reminder problem -- number 5) as separate issues which have not been solved?
Do you know if these various issues are being worked on? I'm glad to have the temporary fix of rolling back to an earlier version, but I'd like to get back on the current update schedule at some point if and when these problems have been corrected.
Thank you again!

How do I roll-back to the previous version of Firefox? An auto update occurred and now one of the programs used at the office (ACT! v6.0 SwiftMail) won't run with the browser.

The office I work in uses a very old version of ACT!, an accounting package. This package has a component called SwiftPage, an antiquated email system that enables us to email from the ACT DB. SwiftPage runs via the web browser.
Firefox just did an auto update (that I will have to find out how to turn off) and now SwiftPage won't run as it is not compatible.
Can I "roll-back" my version of Firefox or do I have to uninstall and try to re-install an older version?
HELP!

Try loading and using the add-on from this link: https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/
Many add-ons do in fact work if you force them to run. The procedure to roll-back is given in this article: [[installing previous versions of firefox]]
Unfortunately the official Firefox policy is that you downgrade to 3.6 which is supported for a while longer, and not the now unsupported Firefox 4. If after installing and running the ''add-on compatibility reporter'' you still have problems there are ways around the official policy.
I think it is absurd that Firefox 4 may be used by tens of millions of users one day and a few days later those that upgrade to Firefox 5 should be not only told not to use a now unsupported browser, if they need to revert due to problems, but are actually obstructed in attempts to do so. See also [/questions/840397#answer-205154]

Folders rolling back in finder view in 10.6 connected to a 10.6 server.

I have a server 10.6 with all updates and some times when i connect from 10.6.8 clients by AFP some folders roll back automatically any ideas?

By default the Windows Server 2008 will not have the Line Printer Daemon Service installed and running. With the Server 2008 configured with the Print Services role you need to select the TCP/IP Print Server (LPDSVC) service which allows computers that are using the Line Printer Remote (LPR) service to print to shared printers on this server. The Select Role Services wizard also creates an inbound TCP exception on port 515 for LPD in the Windows Firewall with Advanced Security.
With this enabled you should then be able to use the LPD queue you created on the Mac's to print to the Windows shared queue. Note that the Queue Name on the Mac will be the name of the share used on Windows. A good tip is to keep the share name short and without spaces.
Note that when you type the IP followed by \HP4015, you are connecting via RPC/SMB. For Windows this is known as Point & Print and while the Mac can connect to this same queue, you cannot use the same procedure. Instead you can use the Windows icon within the Add Printer browser to browse the workgroup then the computer name. When selected you often have to enter user credentials saved on Windows to then see the printer share. When the queue creation is completed you then can print but often have to authenticate every time you print. This is why LPD is preferred. The other thing is that with SMB connections, you often cannot use the vendors driver for consumer products. But if this HP is a LaserJet that supports PostScript then there won't be the same limitation.
Pahu

TS1398 My iPhone 5s can no longer use Internet on a wifi network. I've reset everything, how can I roll back to iOS 7?

My iPhone 5s can no longer use Internet on a wifi network. I've reset everything, how can I roll back to iOS 7?
i Was considerinf buying a macbook pro, but am reconsidering spending such an amount of money on a company that can screw up such a basic function. I mean you can have your iOS 8 back if this is what it means, I don't want to use your health Kit app.

You cannot 'roll back' your iOS. That's never been supported or allowed by Apple (with only one exception).
Use this article: iOS: Troubleshooting Wi-Fi networks and connections - Apple
It's not the iOS. It may be a setting on your iPhone or the wi-fi network, or a hardware issue. But it's not the iOS. If it was, then everyone's iPhone 5S using the same iOS would not be working, and that's not the case.
Troubleshoot your issue.

Desperate for easy way to roll back 5.1 firmware to a previous version?

The company I work for uses a proprietary iPod Touch app for data management. I have a 3rd gen iPod Touch that I updated to firmware 5.1. I don't think many people in the company keep up with firmware updates like I do. However that may now be to their advantage because we had an app software update about the time the firmware update happened and my app no longer works like it should - I am one of very few employees, nation wide, that has this problem. I think it has to do with an incompatability of the app software and the 5.1 firmware. I really need to be able to use the app to it's fullest capacity. Its been weeks and the company hasn't fixed the problem so I'm seeking answers of my own.
Is there a simple way to roll back the firmwareto 5.0 or before the cloud software came out (I don't know what version that would be)??? or is it permanent?
I use a Microsoft based notebook for my iPod/iTunes managment so answers gear to a Mac won't necessarily make sense to me.
Thank you!!

"apple" doesnt support downgrade of any software..but there are other ways to do it..u know wat i mean rite

Support pack roll back

Similar Messages

Maybe you are looking for