Swapping the charactersitcs in query

Hi,
I've a query in the following format
Company Code   Material Group Ker Figure1 KeyFigure 2
1000                    AB                   3000          40000
2000                    AB                   5000          60000
3000                    AB                   7000          90000
total                                           15000        190000
when you swap the Material Group to company code then the values for the key figures are coming in percentage. Can we avoid the percentage values?
after swanpping the result will be...
Material Group Company Code   Ker Figure1 KeyFigure 2
AB                   1000                   20%          25%
AB                   2000                   30%          30%
AB                   3000                   50%          45%
total                                           15000        190000
Advance thank you very much. I would really appreciate for your responce.

Hi,
Are you getting percentage symbol beside the keyfigures after swaping?
You have to tell us how these key figures are defined by checking in query designer.
As per my knowledge i don't know a feature which displays % with the change of layout.
If % is getting displayed, please ignore my reply.
But if you are not getting percentage symbol, then it could be because the keyfigures are built based on another keyfigure(could be hidden) and is defined as a constant selection
Regards,
Raghu

Similar Messages

How to use the same POWL query for multiple users

Hello,
I have defined a POWL query which executes properly. But if I map the same POWL query to 2 portal users and the 2 portal users try to access the same page simultaneously then it gives an error message to one of the users that
"Query 'ABC' is already open in another session."
where 'ABC' is the query name.
Can you please tell me how to use the same POWL query for multiple users ?
A fast reply would be highly appreciated.
Thanks and Regards,
Sandhya

Batch processing usually involves using actions you have recorded. In Action you can insert Path that can be used during processing documents. Path have some size so you may want to only process document that have the same size. Look in the Actions Palette fly-out menu for insert path. It inserts|records the current document work path into the action being worked on and when the action is played it inserts the path into the document as the current work path..

Is there any way to prevent the OS from querying the Superdrive when start

Just a random question. Whenever my MacBook Pro starts up (either from sleep or a complete/fresh start, the OS queries the drive slot to see if there is a disc present. While this may be normal behavior, it seems to slow down the start up process. (I rarely ever have a disc in the drive). Just curious if this, in fact, normal, or if there's something awry.

Is there any way to prevent the OS from querying the Superdrive when start
No
he OS queries the drive slot to see if there is a disc present.
How can you tell? Based on the noise it makes?

How to create the layout for query in Bex 3.5

Hi All,
i have one requirement to do layout for query. Report like after passing the variable values and then they will select the required layout. It has to get output according layout selection fields.
i have no idea about how to create layout.
thanks in advance...
Thanks & Regards,
Mallikarjuna.k

Hi Gregor,
In the note 1149346 that you have mentioned, it says -
You must start the input-ready query in change mode.
BEx Analyzer: In the properties of the analysis grid, the switch
"Suppress new rows" must not be set. Furthermore,
the switch "Allow entry of plant values"
must be set in the local query properties.
I have not seen this setting Allow entry of plant values in a query - can you tell what is refers to?

How to find the name of query for a given report

Hi All,
I am having the name of a report and i need to find out the name of query for that report . Plz tell me how to find out the name of the query for a given report.
Thanks.
Regards,
Pooja Joshi.

Use this FM
RSAQ_DECODE_REPORT_NAME
This FM takes program name as I/P and gives Query Name as O/P.
This FM uses the structure AQADEF to fetch the data.
Hope this helps.
Regards
Vinayak

Webi report data & the corresponding BW Query data do not tally.

Hi all,
         I am running a Webi report (XI 3.1) over a universe that is built on an SAP BW Query. The data in the report is regarding sales, and the grand total of the 'Sales Amount' as per the BW Query is about 1Million, which is correct. However, when I run a Webi report based on the same BW query, taking ALL the objects from the query (without any conditions and filters), the 'Sales Amount' figure comes out to be only 50K instead of 1Mn(as above). I'm not sure why this figure is so drastically reduced in the Webi report.
        When I remove some objects from the query, Webi displays the correct figure of 1Mn. But these are the objects that are very much required in the report for multidimensional analysis. Dropping these objects would defeat the purpose of the report. The BW query too includes these objects during its execution and then displays the correct sales figure of 1Mn.
       Any help will be greatly appreciated.
Regards,
Alok.

Hi,
     Yes, I was getting partial results. I got rid of it by unchecking the the options in the 'SQL' tab in the Universe parameters.
     Thanks for the help.
Regards,
Alok.

Best practice for multiple instances of the same BEX query

Hi there,
I'm wondering what's the best way to use multiple instances of the same BEX query. Let me explain what I mean:
I have a dashboard with different queries feeding different period of time such as: week to date, month to date and so on. One query for each since it is based on a user exit.
For each query I want to show different data in different sections of my dashboard. Per example: sales per directors or sales per customer group, sales per day, sales per week and the like.I tried to connect a simple bar chart via a direct connection but with no success due to the multiple lines generated by the addition of the sales director, customer group, week number and so on.
My question is about the way to connect the different queries efficiently in order to show the different data while avoiding multiple useless lines.
The image above shows the query browser where, per example, for a Month to date query there will be mutiple line for each week as well as one line for each director. If, for two different components, I want to show data per week and data per director or other representation what is the best practice:
Add another instance of the same query and only put the week information and another one will only the director info?
Should I bind those to the excel file and use formulas to make final calculations?
Will there be a performance issues for adding different instances of the same query
I have 6 different queries (read 6 user exit that filters time via user exit).
Depending on the best practices there might be 4 instances for each for a total of 24 instances in the query browser.
I hope my question is clear enough, if not please do not hesitate I'll clarify as much as possible.
Regards,
Steve

Hi Steve,
Might be trying for solution for a long time, If i understood your question clear let me clarify you few points.
You are trying to access the bex query which is designed with the exit's in the background based on the logic and trying to call the entire dimensions and key-figures in a single connection. Then you are trying to map those data in the charts.
Steve, try to make more connections based upon the logic and split them. use the same query but split them by sales per customer group, sales per day, sales per week by making three different connections and try. You can merge the prompts from all connections.
Hope this Helps!!!
Sorry if i misunderstood your question.
--SumanT

I have updated to maverick from mountain lion.initially my mac book pro was snow leopard.the multitrack touch pad swapping the page is not happening in finder,it is only working in safari.please help me how to get that swiping gesture in finder

i have updated to maverick from mountain lion.initially my mac book pro was snow leopard.the multitrack touch pad swapping the page to get back to previous page is not happening in finder,it is only working in safari.please help me how to get that swiping gesture in finder

Hi..
I repled to you here > https://discussions.apple.com/message/25598596#25598596
Please do not start duplicate topics. It makes it that much harder to assist you.

What is the difference between query & query view in BI 7.0 ?

Hi Experts,
What is the difference between query & query view in BI 7.0 ?
Can anyone suggest me on this.
Thanks & Regards
Sameer Khan

Hi Sameer,
Pls find the below URL for Query&Query View
http://help.sap.com/saphelp_nw04/helpdata/EN/26/6de53cce129749893b008c627ede07/content.htm
http://help.sap.com/saphelp_erp2004/helpdata/en/36/18788b6bca5d02e10000009b38f983/content.htm
Thanks,
John

The problem of query in oracle xml db

hello everybody!
I create a table of xmltype,and insert data in it. But I query data ,the problem comes up.
the xml instance is :
<?xml version="1.0" encoding="UTF-8"?>

<CityModel xmlns="http://www.opengis.net/examples" xmlns:gml="http://www.opengis.net/gml" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:xsi="http://www.w3.org/2000/10/XMLSchema-instance" xsi:schemaLocation="http://www.opengis.net/examples city.xsd">
     <gml:name>Cambridge</gml:name>
     <gml:boundedBy>
          <gml:Box srsName="http://www.opengis.net/gml/srs/epsg.xml#4326">
               <gml:coord>
                    <gml:X>0.0</gml:X>
                    <gml:Y>0.0</gml:Y>
               </gml:coord>
               <gml:coord>
                    <gml:X>100.0</gml:X>
                    <gml:Y>100.0</gml:Y>
               </gml:coord>
          </gml:Box>
     </gml:boundedBy>
     <cityMember>
          <River>
               <gml:description>The river that runs through Cambridge.</gml:description>
               <gml:name>Cam</gml:name>
               <gml:centerLineOf>
                    <gml:LineString srsName="http://www.opengis.net/gml/srs/epsg.xml#4326">
                         <gml:coord>
                              <gml:X>0</gml:X>
                              <gml:Y>50</gml:Y>
                         </gml:coord>
                         <gml:coord>
                              <gml:X>70</gml:X>
                              <gml:Y>60</gml:Y>
                         </gml:coord>
                         <gml:coord>
                              <gml:X>100</gml:X>
                              <gml:Y>50</gml:Y>
                         </gml:coord>
                    </gml:LineString>
               </gml:centerLineOf>
          </River>
     </cityMember>
     <cityMember>
          <Road>
               <gml:name>M11</gml:name>
               <linearGeometry>
                    <gml:LineString srsName="http://www.opengis.net/gml/srs/epsg.xml#4326">
                         <gml:coord>
                              <gml:X>0</gml:X>
                              <gml:Y>5.0</gml:Y>
                         </gml:coord>
                         <gml:coord>
                              <gml:X>20.6</gml:X>
                              <gml:Y>10.7</gml:Y>
                         </gml:coord>
                         <gml:coord>
                              <gml:X>80.5</gml:X>
                              <gml:Y>60.9</gml:Y>
                         </gml:coord>
                    </gml:LineString>
               </linearGeometry>
               <classification>motorway</classification>
               <number>11</number>
          </Road>
     </cityMember>
     <cityMember xlink:type="simple" xlink:title="Trinity Lane" xlink:href="http://www.foo.net/cgi-bin/wfs?FeatureID=C10239" gml:remoteSchema="city.xsd#xpointer(//complexType[@name='RoadType'])"/>
     
     <dateCreated>2000-11</dateCreated>
</CityModel>
I query it:
set long 50000
SELECT extract(value(X),
'/CityModel/gml:boundedBy/gml:Box/gml:coord')
FROM city X;
ERROR:
ORA-31011: XML 语法分析失败
ORA-19202: XML 处理
LPX-00601: Invalid token in: '/CityModel/gml:boundedBy/gml:Box/gml:coord' 时出错
未选定行
when query it again:
set long 50000
SELECT extract(value(X),
'/CityModel/boundedBy/Box/coord')
FROM city X; (it has no namespace)
EXTRACT(VALUE(X),'/CITYMODEL/BOUNDEDBY/BOX/COORD')
has no result.
thank you very much!

<?xml version="1.0" encoding="UTF-8"?>

<CityModel xmlns="http://www.opengis.net/examples" xmlns:gml="http://www.opengis.net/gml" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:xsi="http://www.w3.org/2000/10/XMLSchema-instance">
<gml:name>Cambridge</gml:name>
<gml:boundedBy>
<gml:Box srsName="http://www.opengis.net/gml/srs/epsg.xml#4326">
<gml:coord>
<gml:X>0.0</gml:X>
<gml:Y>0.0</gml:Y>
</gml:coord>
<gml:coord>
<gml:X>100.0</gml:X>
<gml:Y>100.0</gml:Y>
</gml:coord>
</gml:Box>
</gml:boundedBy>
<cityMember>
<River>
<gml:description>The river that runs through Cambridge.</gml:description>
<gml:name>Cam</gml:name>
<gml:centerLineOf>
<gml:LineString srsName="http://www.opengis.net/gml/srs/epsg.xml#4326">
<gml:coord>
<gml:X>0</gml:X>
<gml:Y>50</gml:Y>
</gml:coord>
<gml:coord>
<gml:X>70</gml:X>
<gml:Y>60</gml:Y>
</gml:coord>
<gml:coord>
<gml:X>100</gml:X>
<gml:Y>50</gml:Y>
</gml:coord>
</gml:LineString>
</gml:centerLineOf>
</River>
</cityMember>
<cityMember>
<Road>
<gml:name>M11</gml:name>
<linearGeometry>
<gml:LineString srsName="http://www.opengis.net/gml/srs/epsg.xml#4326">
<gml:coord>
<gml:X>0</gml:X>
<gml:Y>5.0</gml:Y>
</gml:coord>
<gml:coord>
<gml:X>20.6</gml:X>
<gml:Y>10.7</gml:Y>
</gml:coord>
<gml:coord>
<gml:X>80.5</gml:X>
<gml:Y>60.9</gml:Y>
</gml:coord>
</gml:LineString>
</linearGeometry>
<classification>motorway</classification>
<number>11</number>
</Road>
</cityMember>
<cityMember xlink:type="simple" xlink:title="Trinity Lane" xlink:href="http://www.foo.net/cgi-bin/wfs?FeatureID=C10239" gml:remoteSchema="city.xsd#xpointer(//complexType[@name='RoadType'])"/>

<dateCreated>2000-11</dateCreated>
</CityModel>
SQL>create table city of xmltype;
then insert the data into the table
and query:
set long 50000
SELECT extract(value(X),
'/CityModel/boundedBy/Box/coord')
FROM city X; (it has no namespace)
EXTRACT(VALUE(X),'/CITYMODEL/BOUNDEDBY/BOX/COORD')
and I query it again:
set long 50000
SELECT extract(value(X),
'/CityModel/gml:boundedBy/gml:Box/gml:coord')
FROM city X;
ERROR:
ORA-31011: XML 语法分析失败
ORA-19202: XML 处理
LPX-00601: Invalid token in: '/CityModel/gml:boundedBy/gml:Box/gml:coord' 时出错
未选定行
ma oracle is 10g
thank you very much!
Message was edited by:
user508129

Error in saving large value with the data input query

Hi,
I am trying to save a large value in 0Quantity using the data input query into a realtime infocube
e-g
123456789.1234
Error says too many digits.
When i try to save 8 digits before the decimal point ,no error, if it is 9digits before decimal it's thro' error.
Is there any limitation before the decimal.
i know that 0Quantity can take 17 digits including the sign.
Any suggestions.?
regards,
ram

try budgetting in thousands in stead of units? (setting on query itself)
D

Extracting the Logical sql query for the specified report in OBIEE 11g

Hi ,
I want to extract the logical SQL Query for the Particular report in OBIEE 11.1.1.5.
Any pointers related to this will be very helpful.
Thanks,
Sonali

for a try please add Logical sql view to ur report it will dispaly the Logical sql for that Report..
Hope it will helps you.

Can we implement the custom sql query in CR for joining the two tables

Hi All,
Is there anyway to implement the custom sql query in CR for joining the two tables?
My requirement here is I need to write sql logics for joining the two tables...
Thanks,
Gana

In the Database Expert, expand the Create New Connection folder and browse the subfolders to locate your data source.
Log on to your data source if necessary.
Under your data source, double-click the Add Command node.
In the Add Command to Report dialog box, enter an appropriate query/command for the data source you have opened.
For example:
SELECT
    Customer.`Customer ID`,
    Customer.`Customer Name`,
    Customer.`Last Year's Sales`,
    Customer.`Region`,
    Customer.`Country`,
    Orders.`Order Amount`,
    Orders.`Customer ID`,
    Orders.`Order Date`
FROM
    Customer Customer INNER JOIN Orders Orders ON
        Customer.`Customer ID` = Orders.`Customer ID`
WHERE
    (Customer.`Country` = 'USA' OR
    Customer.`Country` = 'Canada') AND
    Customer.`Last Year's Sales` < 10000.
ORDER BY
    Customer.`Country` ASC,
    Customer.`Region` ASC
Note: The use of double or single quotes (and other SQL syntax) is determined by the database driver used by your report. You must, however, manually add the quotes and other elements of the syntax as you create the command.
Optionally, you can create a parameter for your command by clicking Create and entering information in the Command Parameter dialog box.
For more information about creating parameters, see To create a parameter for a command object.
Click OK.
You are returned to the Report Designer. In the Field Explorer, under Database Fields, a Command table appears listing the database fields you specified.
Note:
To construct the virtual table from your Command, the command must be executed once. If the command has parameters, you will be prompted to enter values for each one.
By default, your command is called Command. You can change its alias by selecting it and pressing F2.

Is there a way to swap the Fn key and left Ctrl key

Is there a way to swap the functions of Fn key and left Ctrl key on the keyboard. I'm used to other keyboards where the keys are switched and I keep pressing Fn when I want to press Ctrl. I figure I'll get used to it eventually, but when I use the laptop in a docking station with a regular keyboard the control key is in one spot and undocked with the Lenovo keyboard the function key is there instead, which makes it hard to get used to.
If not is there a way to disable the Fn + Space bar function that changes the screen resolution. The programs I use use control + space heavily and my screen resolution keeps changing when I don't want it to.
It's a small thing I know, but very maddening.

Thanks, I took the survey. It's interesting the questions on there were asking about location of keys like page up and page down. I find the position of those keys are not that important to me because I don't use them that much and don't seem to mind looking at the keyboard to find them. Also they are almost always in different spots depending on whether you are on a desktop or laptop keyboard so I guess I'm used to unconsciously switching depending on which keyboard I'm on.
But the left control key is one of the most heavily used, at least by developers like me (control+c to copy, control+v to paste, and control+space for code assist, shift + control + f to format code, shift + control + r to find resources, etc...). I have to hit that Ctrl button 1000 times a day. And the key is in the bottom far left corner on every keyboard (desk top and laptop) I've ever seen until now. Having to remember to look down at the keyboard to find the key is proving difficult and I think is actually hurting my productivity. Especially control+space (when you are expecting a popup to automatically complete the line of code you're working on and instead the screen blinks, resizes and your whole editor loses focus it really breaks your flow of thought, so thanks a million for helping me turn off the silly screen zoom feature).
Hopefully I'll get used to it like with the other keys like page up and page down although I've had the laptop for two weeks and it's proving difficult. If I had know that Thinkpads have this layout and how maddening it would be to get used to it I probably wouldn't have bought it, even though everything else about it is great. It's amazing how such a small thing can become such an irritant.
Well thanks again, and if anybody from Lenovo engineering is reading this post, my vote is for some bios setting on the T61P that swaps the functions of Fn and Left control key. It would save me a lot of grief anyway.

How to change the font in query builder window in Reports 6i?

Hi
I am facing the old problem again and again, which is I can not find any way to change the font in query builder window in Reports 6i. The current font is so bad for alignment and ordering each part of SELECT statement. Is there any way to change this to COURIER NEW for example?

No, but I suggest using a different editor which does allow a different text option and just pasting it in.

Swapping the charactersitcs in query

Similar Messages

Maybe you are looking for