SWFloader causing "transcode" errors

I'm trying to embed an SWF file (dynamic application) into my current mxml file and I'm getting errors (detailed code below). The index.swf that I'm trying to embed is located in my src and my bin-release folders. Why can't it find the swf file? Maybe I'm just not understanding the meaning of the transcoding errors. Please help.
My Code:
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
               xmlns:s="library://ns.adobe.com/flex/spark"
               xmlns:mx="library://ns.adobe.com/flex/mx" minWidth="1000" minHeight="600"
               currentState="CloseArchives">
    <fx:Style source="archive.css"/>
    <s:states>
        <s:State name="CloseArchives"/>
        <s:State name="OpenArchives"/>
    </s:states>
    <fx:Declarations>
        
    </fx:Declarations>
    <s:BorderContainer id="s1" x="0" y="0" width="1000" height="600" backgroundColor="#730F0F" width.OpenArchives="675" x.OpenArchives="325">
            <s:Label text="Map Area" x="0" fontSize="17" fontWeight="bold" color="#FFFFFF"/>
            <s:Button width="42" enabled="true" x="0" y="284" label=">" includeIn="CloseArchives" click="currentState='OpenArchives'"/>
            <mx:SWFLoader x="0" y="0" width="1000" height="600" width.OpenArchives="675" x.OpenArchives="0" id="mapload" source="@Embed(source='index.swf')"/>
    </s:BorderContainer>
    <s:BorderContainer includeIn="OpenArchives" x="0" y="0" width="325" height="600" backgroundColor="#4289AA" id="s2">
        <s:Button x="273" y="287" label=">" width="42" enabled="true" id="OpenArchives" x.OpenArchives="294" y.OpenArchives="289" label.OpenArchives="<" click="currentState='CloseArchives'"/>
        <s:RichText x="10" y="10" text=" Previous Years Information: 2009   Albemarle-Pamlico    Map    Report    Project Photos      Project Name (Before)" width="294" height="578"/>
    </s:BorderContainer>
    <s:transitions>
        <s:Transition id="opening" fromState="CloseArchives" toState="OpenArchives">
            <s:Parallel targets="{[s2]}">
                <s:Fade duration="1000"/>
            </s:Parallel>
        </s:Transition>
    </s:transitions>
</s:Application>
My Errors all for the line where the SWFloader is located:
unable to resolved 'index.swf' for transcoding
Unable to transcode index.swf
Thank you in advance,
Alison

Hi Michael,
Thank you for the tip. I tried making it a full path and received the same error message.
-Alison Page

Similar Messages

Flash Builder Burrito 'unable to resolve ... for transcoding' error css file

Hi,
I am trying to dip my toes into the waters of mobile development with the preview release of flash builder burrito.
I am doing so by trying to port over an application I have built in Flash Builder 4 for the web, by bringing it into a mobile app piece by piece, using the view stack struture peculiar to mobile apps.
I am haivng an issue with my untouched css file that I am trying to use in the app. It's a direct copy from the other app in the same directory structure and yet I have declarations of embedded images of the form:
.topLogo {
url: Embed(source="assets/images/header-logo.png");
Which continually cause:
unable to resolve '/assets/css/assets/images/header-logo.png' for transcoding Flex Style Problem
errors.
It is drving me utterly nuts. The images are there, and if I change the path to an invalid one I get a proper error in the editor, so it IS resolving them, but then these transcoding errors come up and seem to be triggering repeatedly as the problems pane keeps taking the focus away from the editor.
It's driving me nuts.
Anyone know if I've missed something?

Problem solved by turning off Design View (which we never use anyway, useless thing for OO style programming), it's on by default with a new install of Flash builder.
The mobile app looks promising, just waiting on a developer license to see how it goes on an iPad

Transcoding Error with Premiere Elements 7

I have worked with Lightroom and with Photoshop Elements, and I am now trying to use Premiere Elements (7) to create a project of video clips and stills from my Canon DSLR. I can create a DVD with eleven video clips (although it will not play on my old-ish DVD player, just on my computer), but when I add 18 JPEGs (generated from RAW files), I get a "transcoding error" when I try to burn a DVD. Even without burning, when I try Preview, the still images look extremely low-res. Any way I can get this to work?
And, please pardon me for saying it, but I use Lightroom a great deal, Elements somewhat, and I have a pretty new 4 GB RAM Dell with much NTFS disk space, and two decades of doing computer support professionally. Given all of that, Premiere Elements seems to be an atrocious performer - 7 anyway. It takes an incredibly long time to load, and starts flashing "running low on memory" messages shockingly quickly. A glance at forum messages suggests that 8 may not be an improvement. Any suggestions on performance? Lightroom is pretty much lightning fast.

Welcome to the forum.
First, editing Video is far more intense on the computer, than even very large images in PS. The resources issue can likely be overcome by the tips in this ARTICLE.
Also, with any resources issues, remember that these can be physical RAM, and also the Windows Virtual Memory (Page File). The size, location and management of the Page File can be very important, especially if one has many other programs and Processes stealing resources unnecessarily.
Last, let's talk about the burning (and Transcoding) of a DVD-Video. First place to look would be the size of your still images. You cannot display more pixels, than the Frame Size of your Project. Unless you are doing a lot of animation, having them any larger than the Frame Size is a waste. The quality will actually be better, if you do your resizing in PS, and not letting PrE do it for you. This ARTICLE will give you some tips. Having to process large stills will rob your system of necessary resources.
As for the burned DVD-Video not playing in a set-top player, and only a computer, the most likely causes of this are the blank media itself, and too high a burn speed. I strongly recommend using Verbatim, or Taiyo Yuden media, and recommend against using Memorex, TDK, recent RiteK or any store brands. I also would use slower speed media, as PrE will try to get the fastest burn, based on the speed of the blank media and the burner. Slower is better. I can manually assign the speed in my authoring program, and choose a speed at least half of the max.
Good luck,
Hunt

Transcoding error Premiere Elements 2.0

I'm having trouble with burning to a DVD. I keep on receiving a transcoding error that reports that Adobe failed to return a video frame and it's cancelling the operation.
Most of the time the burn process fails at about 42 % although the last time I tried it failed at 28%. The movie is about 77 minutes long, the hard drive has about 36 Gb free which seems adequate to me. I've been through the movie almost frame by frame, it took a long time but couldn't see anything that might cause problems although I'm no expert One thing I did notice was that there were three clips that had not been rendered and resisted all attempts, instead of a Red/green line it was grey, is this normal and could this be the problem?
I have also tried to export the movie as a AVI file and create another project but again when trying to burn I got the same transcoding error.
Any guidance would be appreciated.
John

Have you tried this?
http://www.adobeforums.com/webx/.59b5f52c
Based on the information you've provided though, my first guess would be that you don't have enough free, defragmented space -- particularly if your source files are something other than DV-AVIs captured from a miniDV camcorder.

Transcoding error with Premiere Elements at 50% encoding point

I am getting a transcoding error at exactly the 50% encoding point multiple times. I have reduced the amount of video to burn and also tried burning to a file with no success. I have even purchased a 1 TB hard drive, re-installed Windows XP and the Premiere Elements software to make sure I had enough hard drive space and still am getting the error. Any other ideas.

These messages are not necessarily about PrEL, but read for the ideas
Long File Names or odd characters cause problems
Read http://forums.adobe.com/thread/588273
And #4 Here http://forums.adobe.com/thread/666558
And This Message Thread http://forums.adobe.com/thread/665641
Photo Scaling for Video http://forums.adobe.com/thread/450798
-Too Large May = Crash http://forums.adobe.com/thread/879967

Transcoding Error Premiere Elements 10

I would like to start by saying what a great forum this is, I am so glad I found it. The information here is...well, a little overwhelming at first.
I am new to elements 10, three weeks ago. I am trying to create a slide show of mainly stills (4320x3240) and a couple of clips (1280x720). I have a blueray player so to maximize the quality of stills on the tv I would like to output to Share/Disc/AVCHD and burn to a DVD disc. I start the project with the preset of NTSC/AVCHD/1920 x 1080 because the pixel size is square as I believe my pics are. I have taken Bill Hunt's recommendations to heart and resized my pics to 1080 tall, which will make them 1440 wide. The reason I don't use the 1440 x 1080 preset is because it is not square pixels. Is this correct?
The problem I am having is once the project gets larger, 50 stills, 2 short clips, transitions, titles, etc. I end up getting a "Transcoding error" while trying to burn it to a DVD. When I try to burn a smaller project half that size, it completes fine and I have the best looking pictures on my TV. Is the transcoding error possibly caused by lack of system resources or is there something else I am doing completely wrong? My system meets and slightly exceeds the recommended specs for Premiere Elements 10.

As Steve says, Scale the Still Images, prior to Import. The quality will be better, if you use a program, like Photoshop, or Photoshop Elements. This ARTICLE goes into more detail, plus will tell you how to use Actions, and Automate To>Batch, to Scale entire folders, almost instantly.
With HD-lite material, going to SD, there are some choices, and also compromises, that will need to be made. The choice of workflow might depend on how one likes to work, and possibly on some testing.
One workflow would be to edit the HD-lite material in a Project, that matches perfectly, and then Export/Share to DV-AVI. One would then create a New Project for DV SD, Import that material into it, along with your Still Images Scaled to the DV SD Project. This leaves ALL Still Image Scaling to PS/PSE, and the quality WILL be better. The downside is that your HD-lite material will be down-rezzed, but that will have to happen somewhere, so PrE is not a bad place to do it. The Projects will also edit smoothly.
Another, and a variation on # 1 would be to follow the guidelines in this TUTORIAL on down-rezzing from HD to SD, by Jeff Bellune.
A third workflow would be to create an HD Project, that matches your Source Footage, and also to Scale the Still Images to match THAT Frame Size. Edit, as is needed, then output to DV-AVI for the SD/DVD material. Then, one would create a New Project, for DV SD, and Import that DV-AVI into it, for any touch-up, and the final authoring to DVD-Video. The downside to this method is that one would be letteing PrE do the down-rezzing of the Still Images too, and PS/PSE is much better suited.
Good luck, and welcome to the forum.
Hunt

PE7 transcoding error

    I'm having an issue burning my latest project to blu-ray. At the 33% - 35% completion mark, PE7 fails and returns a "transcoding error - PE failed to return a video frame."   I've gone through my content multiple times, and the timeline is fluid and complete. When I preview the movie on the title composition page, it plays without error.
     Any suggestions on how to figure out which video file is corrupt? Does the completion percentage correlate with the length of the timeline? i.e. - if my movie is 12 minutes long, and my transcoding error is at 33%, should I be looking around the 4:00 minute mark?
     Thank you for your help.

     The camcorder is a Sony HRD-SR10 camcorder. My computer has 90GB free on the hard drive, is a 3.2 GHz dual core processor with a blu-ray burner and 4GB RAM. I have successfully burned 15 minute blu-ray movies via PE7 on this computer before. As for presets, I cannot recall exactly, but they remain the same as the settings I used in my previous movie.
     I went through every frame of the timeline, and it is without a single gap. Here is the only thing I can speculate: I have two sequences in my 12 minute movie where I scroll through high resolution still photos (10+ megapixel and over 4 MB per shot). I have read in the forums that I should down-size these shots, as they can cause a transcoding error. I will attempt this shortly (when I can find the time with my work schedule). My only hesitation is that I have done the same still sequencing in the past with high-res photos, and it never caused a problem.
Thank you for your help.
-Evan

I am trying to install current Firefox 3.6, as I am currently running an older Firefox on my Windows ME, but I keep getting this error message: "Setup has caused an error in SETUP.EXE Setup will now close."--Please help?

I have downloaded all IP changer Privacy software I have purchased and am trying to install it, and although it is made to work with WindowsME that I am currently using on my computer, it now says it requires Firefox 3 or above to be able to install the software. Therefore, I am trying to update my Firefox to current 3.6 but once Firefox 3.6 downloads it doesn't install. Instead I just keep getting the same error message: Setup has caused an error in SETUP.EXE. Set up will now close. Several times, I have also tried restarting the computer as the error message also recommended But I just still keep getting the same error message when I try to update/install Firefox 3.5. Please help/advise on how I can fix this problem. Many thanks in advance!

Firefox 2.0.0.20 is the last ever version of Firefox for Win98 / SE / ME.
You can get it from here, but you are better off using K-Meleon (derived from Firefox) or Opera instead an old version of Firefox:
[ftp://ftp.mozilla.org/pub/firefox/releases/2.0.0.20/win32/en-US/]
You can try KernelEx to get Firefox 3+ to work, but it would be very slow with an old PC of less than 750Mhz. 3.5 and later supposedly doesn't work.
http://sourceforge.net/projects/kernelex/

A view, function and TO_DATE causing an error.

I have the following statement which calls a view, VW_DIST_RPT_WORK_LIST which in turn calls a function which returns either 'Null' or a date string e.g. '07 Oct 2003' as a VARCHAR2 (alias PROJECTED_DELIVERY_DATE).
Statement:
SELECT CUSTOMER_NAME, PROTOCOL_REFERENCE, SHIPPING_REFERENCE, CUSTOMER_REFERENCE, COUNTRY, PROJECTED_DELIVERY_DATE, STATUS, NOTES,
TO_DATE(PROJECTED_DELIVERY_DATE)
FROM VW_DIST_RPT_WORK_LIST
WHERE EXPECTED_DESP_DT IS NOT NULL
AND UPPER(PROJECTED_DELIVERY_DATE) NOT LIKE('NULL%')
AND EXPECTED_DESP_DT <= TO_DATE('07/10/2003', 'DD/MM/YYYY')
AND TO_DATE(PROJECTED_DELIVERY_DATE) <= TO_DATE('31/12/2003', 'DD/MM/YYYY') --< Problem here
I need to be able to specify a date filter on the PROJECTED_DELIVERY_DATE field and hence used the TO_DATE(PROJECTED_DELIVERY_DATE) <= TO_DATE('31/12/2003', 'DD/MM/YYYY') but this is generating an ORA-01858: a non-numeric character was found where a numeric character was expected.
I think the problem lies with the fact that this field can contain 'Null' which cannot be converted to a date using TO_DATE. I've tried adding a NOT LIKE ('NULL%') statement to catch any nulls which may be creeping in bu this doesn't solve the problem.
I've added TO_DATE(PROJECTED_DELIVERY_DATE) to the select above to determine if the nulls are being caught and if the TO_DATE in performing the conversion correctly which it is on both counts.
Any ideas anyone ?

The answer provided above by Monika will work for this situation. However, you should seriously think whether you should be using a string for date datatype. Ideally, you should rewrite the function that returns PROJECTED_DELIVERY_DATE and change the return type to DATE. The least you should do is to return NULL (instead of the string 'NULL') from the function. Oracle handles nulls perfectly, there is no reason you should write code to handle nulls;
One more thing. Looking at the type of error you are receiving, it seems that you are using rule based optimizer. Why do I think so? Because, in rule based optimizer, the conditions are evaluated in a specific order (viz, bottoms-up for AND clauses). To show this, look at the following simple demonstration. I did this in Oracle 8.1.6 (also in 9.2.0.4.0 on Windows).
-- Check the database version
select * from v$version;
BANNER
Oracle8i Enterprise Edition Release 8.1.6.1.0 - Production
PL/SQL Release 8.1.6.1.0 - Production
CORE 8.1.6.0.0 Production
TNS for Solaris: Version 8.1.6.0.0 - Production
NLSRTL Version 3.4.0.0.0 - Production
-- Create the test table
create table test (a number(2));
insert into test(a) values (0);
insert into test(a) values (1);
insert into test(a) values (2);
insert into test(a) values (3);
insert into test(a) values (4);
insert into test(a) values (5);
insert into test(a) values (6);
insert into test(a) values (7);
commit;
-- See that I have not analyzed the table. This will make use of RULE based optimizer
select * from test
where a > 0
and 1/a < .25;
and 1/a < .25
ERROR at line 3:
ORA-01476: divisor is equal to zero
-- Look at the query clause. Even though I specifically asked for records where a is positive
-- the evaluation path of rule based optimizer started at the bottom and as it evaluated the
-- first row with a=0, and caused an error.
-- Now look at the query below. I just re-arranged the conditions so that a > 0 is evaluated
-- first. As a result, the row with a=0 is ignored and the query executes without any problem.
select * from test
where 1/a < .25
and a > 0;
A
5
6
7
-- Now I analyze the table to create statistics. This will make the query use the
-- cost based optimizer (since optimizer goal is set to CHOOSE)
analyze table test compute statistics;
Table analyzed.
-- Now I issue the erring query. See it executes without any problem. This indicates that
-- the cost based optimizer was intelligent enough to evaluate the proper path instead of
-- looking only at the syntax.
select * from test
where a > 0
and 1/a < .25;
A
5
6
7
Does the above example seem familiar to your case? Even though you had the AND UPPER(PROJECTED_DELIVERY_DATE) NOT LIKE('NULL%') in your query, a record with PROJECTED_DELIVERY_DATE = 'NULL' was evaluated first and that caused the error.
Summary
1. Use dates for dates and strings for strings
2. Use cost based optimizer
Thanks
Suman

Photoshop CS4 for Mac What can cause the error: Plug-in failed to load - NO VERSION

With Photoshop CS4 for Mac I install the Kodak Plug-in DIGITAL GEM Airbrush Professional v2.1.0. When Photoshop starts I get an error:
Plug-ins that failed to load:
   DIGITAL GEM Airbrush Professional v2.1.0 NO VERSION - - from the file “DigitalAIRProv2.plugin”Flash:
   Connections
   Kuler
This plug-in works fine on my Mac Pro with Photoshop CS4 and OS 10.6 but fails on a new Macbook Air.
Reinstalling the plug-in did not make any difference. What can cause this error?

Thanks Chris, That was my first thought too but this same plug-in works on another installation of CS4. This is a Mac installation and the plug-in is Universal so it should work. Is there any other possible cause for this error? Would Photoshop refuse to load a plug-in in a low memory situation?
Also, The Flash extensions:Connections and Kuler are working OK, I just copied a little more out of the System Info report than I needed to.

Adobe Premiere Elements 2.0 - Transcoding Error???

Hello, I'm having this problem with Adobe Premiere Elements 2.0... Every time I try to burn this movie to a DVD (1x JPG 1607x886, 7x VOB Video Files - 6 are about 50 mins long and one is 5 mins), I have also made a menu for it. But when it gets to 15.63% on the second encoding I think, I get this 'Transcoding Error'? What does it mean and what do I do to fix it? Any help would be very much appreciated... I uploaded a picture of the problem here:
http://www.fotothing.com/photos/335/3353d27d34c7b04db3f64a7c1525810f.jpg?ts=1228215011
Thanks for any help you might give :)

You may have to remux the VOBs using VideoRedo Plus. Remuxing is relatively fast and can correct problems with VOBs that you have in Premiere Elements 2.0.
Is there audio for the entire movie?
You might also have a problem with DVD markers or the menu. The only way you are going to find out is to remove them and try burning.

DESADV01 E1EDP07 segment per line item causes EDIFACT error

When a Sales Order has the PO Number + Date populated, the subsequent outbound Delivery IDoc (DESADV01) contains a parent E1EDP07 segment for every child line item segment (E1EDP09). For a SO without PO Date, the IDoc is created with a single E1EDP07 with multiple child E1EDP09 segments. This is standard SAP - do you need to code around this?
The first scenario causes an error in EDIFACT mapping, as a limit of 9 RFF segments is allowed (E1EDP07 is a level 1 segment). Partner systems reject this.

Hi,
Segment field should be optional, so check the posting keys in OB41, check the GL account which hit this posting and check the FIeld status in OBC4 and make the segment field as optional.
while posting the transactions you can check in more then Profit center and segment details will be updated in the postings.
try out, this might help. check the new ledger document types also.
Regards,
Padma

Does anyone know what is causing this error please?

I recently ran sfc /scannow. It completed without giving me any notifications other than a number of:
"Files that are required for Windows to run properly must be copied to the DLL cache."
I was prompted to insert my XP SP3 installation CD and click on 'retry'.
The scan lasted for around 40 minutes then closed.......at no stage was I advised that it had been unsuccessful.
When I restarted my computer directly afterwards, half way through booting a 'please wait' appeared, as if something was taking place.
I thought all had gone well until I looked in Event Viewer later. There are approximately 90 Windows File Protection entries there mostly with the following information:
The system file ........ could not be copied into the DLL cache. The specific error code is 0x800b0100 [No signature was present in the subject]. This file is necessary to maintain system stability.
Does anyone know what causes that error and what I need to do to resolve it please?

Thank you very much for helping.
I have already tried to run the Microsoft Fix it from there for XP SP3, the os I have>>>>>>>"This troubleshooter does not apply to your system. We're sorry, but this troubleshooter is not compatible with your current system's configuration."
That was the only Microsoft information I could find on the specific error code I received: 0x800b0100......although the article applies to Microsoft Updates, I thought it might cover this too.
I have now run SFC three times, but errors still showed in Event Viewer.
I regularly run Chkdsk, last few times no errors.
I am actually having my computer checked for malware right now by specialist malware removers......all the malware scans I regularly run have given me the all clear for some time (McAfee Stinger, Hitman Pro, Malwarebytes - MBAM, TDSSKiller) but there has
been malware on my computer in the past, which was removed (not serious I was told).
In two of the scans the techs asked me to carry out there are
hundreds of dll cache entries under
Files/Folders - Created Within 30 Days on the date I run SFC.
I am waiting for this to be confirmed, but it looks to me as if SFC was actually successful to a large extent and the entries in Event Viewer are some failures (not all as I previously thought)?
I also have a serious problem in relation to Microsoft Updates (please see my other question).

HELP: Spent hours/days trying to fix transcoding error in DVD burn

I'm at my wit's end. Been 'round and 'round online help, troubleshooting randomly, etc. After my movie is edited in Premiere Elements 3.0 I try to burn it in Create DVD. Each time I try I get transcoding error at 31.69% and the message that Adobe has failed to return a video frame. I've gone over the rendered video and especially at about the 34-minute mark but cannot find problem.
I took original footage in Flip camera, converted the file to .wmv with Prism Video Converter, as I always do, and the first version of this movie burned with no trouble. I came back and added a clip, also in .wmv format, and now it won't burn. Seriously, I'm going crazy and would love to be able to chat by phone so someone can walk me through it. This video is for a workshop that I lead and people are waiting for it.
Can anyone help me?
Nora

Well, gentlemen, I awoke this morning to the same error in the same spot.
So I combed the entire timeline again and did actually find and fix a couple of gaps which I'd somehow overlooked the first two times (can't imagine how that happened). Burned it again and same error, same place. Really, this is killing me.
So all I need now is to know how to successfully export/burn it to a folder or other media. Then maybe I can re-load it into Adobe or burn directly to DVD from remote place. I'm trying now to burn it to 8.(?)G folder because when I tried burning it to 4.7G folder it didn't work.
Any other suggestions for getting this movie onto another form of media so I can go from there?
Thank you
Nora

[svn:fx-trunk] 11999: Fixed: ASC-3889 - Using setting in a for loop causes Verify error

Revision: 11999
Revision: 11999
Author:   [email protected]
Date:     2009-11-19 11:37:09 -0800 (Thu, 19 Nov 2009)
Log Message:
Fixed: ASC-3889 - Using setting in a for loop causes Verify error
Notes: emit pop after callstatic to a void function to balance the stack.
Reviewer: jodyer+
Testing: asc,tamarin,flex checkin tests
Ticket Links:
    http://bugs.adobe.com/jira/browse/ASC-3889
Modified Paths:
    flex/sdk/trunk/modules/asc/src/java/macromedia/asc/semantics/CodeGenerator.java

Blacklisting the ahci module does indeed get rid of the error. Would be nice to figure out why it was conflicting with the ahci module though.
I have not yet tried the 173xx drivers, but the latest drivers for the Quadro FX 580 are the 256.53 drivers according to nvidia.
Posted at the nV forums (http://www.nvnews.net/vbulletin/showthread.php?t=155282), so we'll see what they suggest.

SWFloader causing "transcode" errors

Similar Messages

Maybe you are looking for