Switch fremwork for EA-HR Globle status of off.

hi,
I am working for ESS/MSS implementation project.
while implementing BADI "HRASR00PROCESS_REF_NUM" we are getting message
HRASR_DEF active badi implemention does not exist.
After analysis of issue found that in SFW1 EA-HR is active but Global status of off, so we are getting message implementation is not called.
If we try to change will ask for Key.
As we are already running on EHP2 i.e EA-HR is 602.
MANY THANKS !

Need to activate EA_hR fremwork

Similar Messages

How to Control authorization for users with certain status for level 2 WBS Element

Dear All,
Is there any standard way or enhancement available to control authorization for users with certain status for WBS Element i.e. for example
Pre-requisite:
There is only 2 level of project i.e.
Lev_ WBSE_______Description
1___ 7-14.E_______summay outage controller
2___ 7-14.E.2310__ Plant/unit # 2310
2___ 7-14.E.2310__ Plant/unit # 2220
Project Controller (authorization role assigned "Z_PS_OP7_OTGCON_C") have all project level authorization
Plant/Unit Controller (authorization role assigned "Z_PS_OP7_PLNTOTG_C_2310") have only level 2 authorization with enhancement that we did in system by Z table.
User ID_ Plant #
123345_ 2310
122455_ 2220
Issue:
After System Status released and User Status approved the WBS basic date for Plant/Units should be restricted from updating/changing by Plant/Unit Controller level and only project controller should have this authority.
Solution required:
Can any one tell how to control this scenario either by standard or enhancement available to control authorization
BR
Saqib Usman

Hi,
Did you explore SAP Enhancement CNEX0002 Using Transaction CMOD?
Thank you and regards,
Varshal Kachole
The SCN Rules of Engagement

The App Store said I needed to switch countries so I clicked the button and it switched it for me but now I can't update my apps but when I try to change it through settings it still says the country is the u.s. I don't know what to do to change it back

The App Store said I needed to switch countries so I clicked the button and it switched it for me but now I can't update my apps but when I try to change it through settings it still says the country is the u.s. I don't know what to do to change it back

See > Change your iTunes Store country
Here > http://support.apple.com/kb/HT1311
If necessary Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

Process flow for the Mid-year Status Changes based upon the Qualifying Even

Hi Experts,
I'm looking some information for the process flow for the Mid-year Status Changes based upon the Qualifying Events. Basically, I need to know, what would be the impact of these changes on various info types (Via IT0014 - Deduction changes & so forth) and the things that needs to be considered during it's Configuration and the things that needs to be checked due to the occurrence of the change. I would greatly appreciate any kind of help/document.
Thanks a bunch in advance,
Thanks,
Exertive.

Hello guys,
Can anyone has any kind of input on this? Basically, I need to know the procees for Mid-year status changes based upon Qualified events. Any kind of help is greatly appreciated.
Thanks,
Exertive.

I have an iPod touch 4 generation. Would I be able to switch it for an iPod touch 5 generation?

I have an iPod touch 4 generation. Would I be able to switch it for an iPod touch 5 generation?

Apple will only give you a 10% recycling discount if you turn in an old iPod when you purchase a new one. Better off selling it yourself.
Apple - Recycling Program for iPod and Mobile Phones

Switch statement for AS3 - Flash CS3

Hey guys, I currently have a code of a switch statement for as1- as2.
This is it:
switch (int(Math.random() * 20))
    case 0:
        hint = "The total amount of confusion in this world remains constant. It just gets shifted around.";
        break;
    case 1:
        hint = "If you experience poor performance, adjust the quality settings in your preference menu option.";
        break;
    case 2:
        hint = "Anticipation of death is better than death itself.";
        break;
    case 3:
        hint = "At the core of all well-founded belief lies belief that is unfounded.";
        break;
    case 4:
        hint = "The problem with instant gratification is that it takes too long.";
        break;
    case 5:
        hint = "Never let your schooling interfere with your education.";
        break;
    case 6:
        hint = "Beware of geeks bearing gifs.";
        break;
    case 7:
        hint = "Collaboration is essential: It allows you to blame someone else.";
        break;
    case 8:
        hint = "Read my MIPs - no new VAXes.";
        break;
    case 9:
        hint = "Where is the sea, said the fish, as they swam through it.";
        break;
    case 10:
        hint = "You can safely blame any bugs on Aoedipus, who is too busy grinding battlegrounds to do QA on her own work.";
        break;
    case 11:
        hint = "Anything worth doing is worth overdoing.";
        break;
    case 12:
        hint = "There is more to life than increasing its speed.";
        break;
    case 13:
        hint = "Don\'t worry, this will take about as long as the time it takes to play a 2v2 match with 4 ret pallies.";
        break;
    case 14:
        hint = "There is nothing worse than the brilliant image of a fuzzy concept.";
        break;
    case 15:
        hint = "If you are not part of the solution, you are part of the precipitate.";
        break;
    case 16:
        hint = "Two wrongs don\'t make a right, but three lefts do.";
        break;
    case 17:
        hint = "The heresy of today is the logic of tomorrow.";
        break;
    case 18:
        hint = "It\'s not that life is so short, it\'s just that you\'re dead a really long time.";
        break;
    case 19:
        hint = "Those who love sausage, the law, and holy canon should never watch any of them being made.";
        break;
    case 20:
        hint = "What if there were no hypothetical questions?";
        break;
} // End of switch
hint = "HINT: " + hint;
This code is for a dynamic tet with the var 'hint' (No ' ' )
But in as3 there is no var and I am having trouble converting it to AS3 coding, can someone show me the correct conversion of the code to make it work with AS3. I will make the instance name 'hint'.
Thank you ahead of time.

In addition to what other guys said, if you still want to use switch it should be:
switch (Math.round(Math.random() * 20)) - this will cover all the possible integers.
Nevertheless, I believe using switch in this case is not as efficient and scalable as using, say, array.
1. array index access is faster than switch.
2. if you need to make additions, you will need to make additions in switch while with array you just need to add/subtract member
3. if you will need to switch to a more dynamic model (say, getting hints from xml) - it will not be possible with switch
4. you may need a greater degree of randmization (Math.random is not as random as one may think) in which case resorting/reordering array is much simpler and faster.
So, I suggest you switch to the following code:
var hints:Array = [];
hints[0] = "Anticipation of death is better than death itself.";
hints[1] = "Anything worth doing is worth overdoing.";
hints[2] = "At the core of all well-founded belief lies belief that is unfounded.";
hints[3] = "Beware of geeks bearing gifs.";
hints[4] = "Collaboration is essential: It allows you to blame someone else.";
hints[5] = "Don\'t worry, this will take about as long as the time it takes to play a 2v2 match with 4 ret pallies.";
hints[6] = "If you are not part of the solution, you are part of the precipitate.";
hints[7] = "If you experience poor performance, adjust the quality settings in your preference menu option.";
hints[8] = "It\'s not that life is so short, it\'s just that you\'re dead a really long time.";
hints[9] = "Never let your schooling interfere with your education.";
hints[10] = "Read my MIPs - no new VAXes.";
hints[11] = "The heresy of today is the logic of tomorrow.";
hints[12] = "The problem with instant gratification is that it takes too long.";
hints[13] = "The total amount of confusion in this world remains constant. It just gets shifted around.";
hints[14] = "There is more to life than increasing its speed.";
hints[15] = "There is nothing worse than the brilliant image of a fuzzy concept.";
hints[16] = "Those who love sausage, the law, and holy canon should never watch any of them being made.";
hints[17] = "Two wrongs don\'t make a right, but three lefts do.";
hints[18] = "What if there were no hypothetical questions?";
hints[19] = "Where is the sea, said the fish, as they swam through it.";
hints[20] = "You can safely blame any bugs on Aoedipus, who is too busy grinding battlegrounds to do QA on her own work.";
hint = hints[int(Math.random() * hints.length)];
// OR
hint = hints[Math.round(Math.random() * (hints.length - 1))];

Switch support for NAC CCA for 6500 series switch

per the 4.0 document "switch support for Cisco NAC" there is a note that says
Catalyst 6000/6500 on IOS do not support mac-notification
Does this mean you cannot deploy layer 2 OOB mode, as snmp notification to the CAM will not happen with the 6k platform?

Probably, the configuration guide will give you better idea about your problem.
http://www.cisco.com/en/US/products/hw/switches/ps708/products_configuration_guide_book09186a00803f5611.html

Method calls in switch and for statements

I have 2 questions concerning method calls in switch and for statements. Consider these two chunks of code:
1)
     switch (foo.getIntegerValue()){
          case 1:
          case 2:
     }My question is, is getIntegerValue() being called for every case statement (since it has to compare with each case) or is the method called only once?
2)
for (Foo bla : xyz.compileFoos()) {
}Is compileFoos called once or on every iteration?
I assume it gets called only once but I would like to be sure. The reason I ask is of course to avoid multiple method calls.
any help is appreciated

sdb2 wrote:
I have 2 questions concerning method calls in switch and for statements. Consider these two chunks of code:
1)
     switch (foo.getIntegerValue()){
          case 1:
          case 2:
     }My question is, is getIntegerValue() being called for every case statement (since it has to compare with each case) or is the method called only once?
     Once, and the value returned compared to each "case" in turn.
2)
for (Foo bla : xyz.compileFoos()) {
}Is compileFoos called once or on every iteration?
I assume it gets called only once but I would like to be sure. The reason I ask is of course to avoid multiple method calls.
any help is appreciatedAlso once, and the returned list/set/array is iterated over.

BTE is for automatic payment transactions:status

hi,
anybody know about the BTE for automatic payment transactions: status?
Thanks,
KG

Hi,
Check the link for the steps to implement the Badi with example..
http://www.sapdevelopment.co.uk/enhance/enhance_badi.htm
/message/1388342#1388342 [original link is broken]

The possibility to hide for displaying a user status in work order

Hello gurus,
I have following issue:
It is possible to hide only for displaying a user status in a work order when it's active?
br,
Laurentiu

See my [recent post|https://forums.sdn.sap.com/click.jspa?searchID=25309331&messageID=7376021] which references user-exit STATTEXT.
PeteA

SMS_STATE_MIGRATION_POINT Health check failed for port 80 with status code 500

My SMS_STATE_MIGRATION_POINT gets a red cross because the health check of the SMS_STATE_MIGRATION_POINT is “sometimes” failing. I don’t understand why its fails sometimes? Any suggestions.
gr, Iwan
Health check operation succeeded SMS_STATE_MIGRATION_POINT 4/15/2010 2:51:29 PM 22044 (0x561C)
Completed availability check on local machine SMS_STATE_MIGRATION_POINT 4/15/2010 2:51:29 PM 22044 (0x561C)
Call to HttpSendRequestSync succeeded for port 80 with status code 200, text: OK SMS_STATE_MIGRATION_POINT 4/15/2010 2:56:29 PM 22044 (0x561C)
Health check operation succeeded SMS_STATE_MIGRATION_POINT 4/15/2010 2:56:29 PM 22044 (0x561C)
Completed availability check on local machine SMS_STATE_MIGRATION_POINT 4/15/2010 2:56:29 PM 22044 (0x561C)
Checking store for cleanup of failed or stale state stores... SMS_STATE_MIGRATION_POINT 4/15/2010 3:01:29 PM 22044 (0x561C)
Call to HttpSendRequestSync failed for port 80 with status code 500, text: Internal Server Error SMS_STATE_MIGRATION_POINT 4/15/2010 3:01:29 PM 22044 (0x561C)
Health check request failed, status code is 500, 'Internal Server Error'. SMS_STATE_MIGRATION_POINT 4/15/2010 3:01:29 PM 22044 (0x561C)
STATMSG: ID=6207 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_STATE_MIGRATION_POINT" SYS=SWAMS0083 SITE=P01 PID=13560 TID=22044 GMTDATE=Thu Apr 15 13:01:29.777 2010 ISTR0="500" ISTR1="Internal Server Error" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 SMS_STATE_MIGRATION_POINT 4/15/2010 3:01:29 PM 22044 (0x561C)
Completed availability check on local machine SMS_STATE_MIGRATION_POINT 4/15/2010 3:01:29 PM 22044 (0x561C)
Call to HttpSendRequestSync succeeded for port 80 with status code 200, text: OK SMS_STATE_MIGRATION_POINT 4/15/2010 3:06:29 PM 22044 (0x561C)
Health check operation succeeded SMS_STATE_MIGRATION_POINT 4/15/2010 3:06:29 PM 22044 (0x561C)
Completed availability check on local machine SMS_STATE_MIGRATION_POINT 4/15/2010 3:06:29 PM 22044 (0x561C)
Call to HttpSendRequestSync succeeded for port 80 with status code 200, text: OK SMS_STATE_MIGRATION_POINT 4/15/2010 3:11:29 PM 22044 (0x561C)
Health check operation succeeded SMS_STATE_MIGRATION_POINT 4/15/2010 3:11:29 PM 22044 (0x561C)
Completed availability check on local machine SMS_STATE_MIGRATION_POINT 4/15/2010 3:11:29 PM 22044 (0x561C)
Call to HttpSendRequestSync succeeded for port 80 with status code 200, text: OK SMS_STATE_MIGRATION_POINT 4/15/2010 3:16:29 PM 22044 (0x561C)
Health check operation succeeded SMS_STATE_MIGRATION_POINT 4/15/2010 3:16:29 PM 22044 (0x561C)
Completed availability check on local machine SMS_STATE_MIGRATION_POINT 4/15/2010 3:16:29 PM 22044 (0x561C)
Call to HttpSendRequestSync succeeded for port 80 with status code 200, text: OK SMS_STATE_MIGRATION_POINT 4/15/2010 3:21:29 PM 22044 (0x561C)
Health check operation succeeded SMS_STATE_MIGRATION_POINT 4/15/2010 3:21:29 PM 22044 (0x561C)
Completed availability check on local machine SMS_STATE_MIGRATION_POINT 4/15/2010 3:21:29 PM 22044 (0x561C)
Call to HttpSendRequestSync failed for port 80 with status code 500, text: Internal Server Error SMS_STATE_MIGRATION_POINT 4/15/2010 3:26:29 PM 22044 (0x561C)
Health check request failed, status code is 500, 'Internal Server Error'. SMS_STATE_MIGRATION_POINT 4/15/2010 3:26:29 PM 22044 (0x561C)
Completed availability check on local machine SMS_STATE_MIGRATION_POINT 4/15/2010 3:26:29 PM 22044 (0x561C)

I'va got the following event in my security event log this is strange because the Windows Firewall is off and the problem is not always there, 8 out 10 time the health checks passes.
Log Name:      Security
Source:        Microsoft-Windows-Security-Auditing
Date:          4/15/2010 7:01:27 PM
Event ID:      5159
Task Category: Filtering Platform Connection
Level:         Information
Keywords:      Audit Failure
User:          N/A
Computer:      ********
Description:
The Windows Filtering Platform has blocked a bind to a local port.
Application Information:
Process ID:  13560
Application Name: \device\harddiskvolume2\programs (x86)\microsoft configuration manager\bin\i386\smsexec.exe
Network Information:
Source Address:  0.0.0.0
Source Port:  9000
Protocol:  17
Filter Information:
Filter Run-Time ID: 0
Layer Name:  Resource Assignment
Layer Run-Time ID: 36

Email alerts for CPU and Memory status of CUCM

Hi All,
can anybody help me here?
Will RTMT trigger the daily email notification for CPU and Memory status of CUCM? If yes, kindly let me know the procedure.
Thanks in advance !!!!

Hi Hariharan,
In addition to Atul's link please refer the below mentioned link CPU and Memory usage
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/managed_services/cucm_health.html#wp1101115
Tx,
Hope this helps
Shalu

Values for various work order status

Hi Guys,
In AUFK table(which is the order master data table), there is a field ASTNR, which indicates the order status.
But I couldn't get any values for each status of the orders.
If anyone knows the status and the value for the corresponding status of the order, please let me know.
</b> I specifically want the value of ASTNR, for which the status is Closed </b>.
Points will be awarded for helpful answers...
Thanks and regards,
SP.

Hey,
ASTNR is not the field you should be evaluating for your requirement. You should look into the system/user status tables of the work order.
The system status master table is TJ02T and the user status master table is TJ30T. To derive the user statuses assigned to work order you need to know the status profile assigned to the work order type.
The various statuses assigned to a work order in its entire life cycle can be found in the table JEST.
In your case first get the user status code from the TJ30T table and then get all records from JEST for the derived user status code. JEST-OBJNR contains the work order number.
~Kiran

Text Mail for every change in status

Dear All,
I know how to trigger mail with smart form for change in status. But I want to trigger sort of alert through mail to respective user. Which will intimate user for change in new status. How can I do that?
In SCOT -> SMTP i have changed PDF to TEXT.
Regatrds,
Nikhil

You can setup a mail action in the action list with the CRM configuration in SPPFCADM for the respective message types. I do recommend that if you have a CRM person there that they be the one to make the adjustments and it should be something that they would be able to understand as all the Service Desk and Maintenance Optimizer and ChaRM are just CRM Transactions so you can create an unscheduled mail option with a SmartForm back-end that triggers when the status is changed which will result in an email - these can be specifc to the partners but you must have the email addresses setup in the BP Employee Role and in the SU01 User record for the same.
Sorry that I can't be more specific but there are a number of actions, programming and conditions to setup to make this work. Hopefully you do have a CRM person around that you can borrow for a little to help you along.

BAPI for knowing the Billing Status of DMR(Resource Related Billing)

Dear All,
I need to know the Billing Status of a Debit Memo Request from the External System.
The Document Flow will be:
Sales Order>DP91>DMR Creation(DR)[VA01]-->Debit Memo Creation(L2)[VF01]
From the external system I need to know whether the DMR has been billed or not.
I have used one BAPI "DISPLAY_DOCUMENT_FLOW_ALV"
in which it was asking to specify a value in the Input Parameter"IV_TITLE_STATUS_SET".
Tell me if this is the correct BAPI and if so what value we need to specify in the Input Parameter.
Needless to say points will be given for helpul replies.
Regards,
Raj Kumar Reddy.

Hi,
You are correct that stauts is updated in table VBUK and VBUP.
However, a sales order does not determine a billing status for delivery related billing, field
VBUP-FKSTA is only determined for delivey.
So, it is correct behavior that VBUP-FKSTA = BLANK when searching VBUP with
VBUP-VBELN = sales order number.
Just because of above reason, you will not find billing status field in VA03 -> goto header/item;
you could only find billing status field for delivery in VL03N -> status overview.
It seems that you are trying to find out sales orders that have been fully deliveried and fully billed, am I right? As far as I know, there is no directly table/field/tcode that could meet your requirement.
You could consider following workaround:
firstly, get a list of deliveries that have been fully billied(search VBUP with VBUP-FKSTA = C or search VBUK with VBUK-FKSTK = C);
Secondly, using these deliveries to search table VBFA to find out related sales orders.
Hope this helps.
Best regards,
Crystal

Switch fremwork for EA-HR Globle status of off.

Similar Messages

Maybe you are looking for