SWL SC only considers partial amount of Internal Order

Greetings, Experts.
We are using SRM 4.0 - Classic and use Portal for creating SC.
We have an Internal Order no. 1111 in the backend with original budget as 1000 GBP and unassigned budget as 700 GBP (1000 less 300 assigned to already created PO's). The Internal order is created for Controlling Area CA01 which has PDR as the currency.
We create SHOP WITH LIMIT (SWL) SC in USD currency with this internal order as account assignment. Reason of using USD (instead of GBP which is the Internal order currency) is - we want PO in USD because Vendor currency is USD. The resultant PO will have account assignment = F(order) and Item Cat=D (service).
For simplicity sake assume that 700 GBP = 1200 USD.
When we specify limit amount as 1200 USD in SWL SC, the system throws error that this amount exceeds the budget. Not only this, say for any amount more than 300 USD, the system keeps on throwing this error and we can not create the SC.
In essence, we can not use the full unassigned amount to crete SWL SC.
The system allows to create SC if Limit amount is less than 300 USD.
We have tested -
1) If we create SHOP SC (as against SWL), the system allows full unassigned amount of internal order.
2) If we create stand-alone PO in the backend, the system allows full unassigned amount of internal order.
Please help in resolving - why the system does not allow full unassigned amount of internal order while creating SWL SC?
Thanks and regards
Vilas

Hi
<b>Please go through the following SAP OSS Notes -></b>
Note 640369 - Incorrect values in dropdown in account assignment details
Note 1027656 - Simplified pricing:wrong price calculation in SC using prod.
Note 1038241 - Simplified pricing: Follow-on note to note 1027656
Note 1034949 - Wrong price in SC when a product has multiple conditions
Hope this will help.
Regards
- Atul

Similar Messages

Error while settling Internal Order to CWIP asset using T-cdoe KO88

Hi experts,
While settling the amount from Internal Order to particular CWIP asset, i am getting the following error
"Define a number range for settlement documents"
Kindly provide me the solutions how to go about it.
Thanks in advance
Bashyam

Hi,
Go to T.Code KANK
Click on "Maintain Groups" (F6)
Assign a suitable number range to object KOAO
Regards,
Kenneth

Internal Order Related Issue

Hi Gurus,
We are having a requirement wherein we need to capture the Actual and Planned amount(In Internal Order) for a order group.
After doing a short R&D on this, we came to know that the transaction code S_ALR_87012993 (Which gives a detailed report of Actual and Planned for a particular order group along with all the cost elements) contains the necessary details...
Does COSP Table contains the Actual vs Planned data of a order group? if that is the case, how can we get that.
Is there any Function Modules to capture the details?
Waiting for your replies...

Hi,
I don't know if there is any suitable FM but you can use the following approach to write your own. You can run SQL trace (transaction ST01) for report S_ALR_87012993. This will give you a list of all SQL queries used in this report. Usually, it's not that hard to figure out how to combine data returned by SQL queries to get wanted result.
Cheers

Bapi for changing internal order settlement rules

Hi
I'm looking for BAPI to add/ modify settlement rules in internal order (like in tc KO02). BAPI_ALM_ORDER_MAINTAIN seems not working, and there's only BAPI_INTERNALORDER_CREATE and GETITEM in internal order group ( there's no MAINTAIN ).
Is there another BAPI to do this? of FM?
regards
Wojciech.

Thanks for help but this links points to discussions abut creating internal order. I want to change one. BAPI_INTERNALORDER_CREATE does not allow to change orders ( i've just tested it.)
regards
wojciech

Capital goods partial amount posting.

I hav one issue of client. requirement is, he has to pass 50% amt on capital goods to registers (RG23C) and 50% to hold account. Amount is going to respective accounts but only AED amount is not going properly. AED amt is going 100% of vendor invoice value to RG registers whereas it also have to go 50% as like other ( BED, or Ecess)
Plz give me some idea where we maintain such settings for partial amounts.
Regards
Inder Pal

Hi Inder
Check the following link
http://help.sap.com/saphelp_47x200/helpdata/en/48/71edea2cd411d4ae1900105a16d13d/frameset.htm
Thanks
G. Lakshmipathi

Calculation of partial amount

My problem is How the total amount of the invoice can be found and partial amout...and how to calucalte it
it is stated that enter will be there in BSEG-REBSG..but hwen i goto that table the DMBTR value is filled...
can anyone explain below part...
FI documents would be internally numbered. So, program to generate .txt file should provide for preventing invoices from being captured for more than the payable amount. For example, if amount credited to vendor is Euro 10,000 vide FI (and invoice verification in MM) document number 330000567. If partial amount of Euro 2000 has already been paid against this invoice, system should prevent user from entering this invoice with amount of more than Euro 8000 that is still payable.
Program should look for (field / table) REBZG / BSEG (Number of the Invoice the Transaction Belongs to) in vendor line items (posting key 31 & 25, 50). System populates this field with invoice number against which partial amount is paid or other adjustment (debit memo amount, for example) happens. Please remember that system does not update this field when entire invoice amount is settled in the last out going payment/other adjustment document.
Program should calculate balance amount to be paid based on:
1. Vendor credited & expense debited vide (posting key 31,32,34 -39) for given invoice number (Document type K0,K1,KI, Number range 34,11,12) MINUS
2. Partial payment/ other adjustments, as per REBZG / BSEG referred above, made against the invoice number entered.
Program should prevent entry for an amount that is more than the balance amount to be received (calculated as per points 1 and 2 above).
It follows that if the balance calculated is full amount of the invoice (i.e. partial payments have not been received or other adjustments not done), then program should allow entry for the full invoice amount. (This will be relevant in case of MRP invoices).
After once it validates..it will send a txt file ..with entries given...

dear i dont know much about FI but in this case of partial payment u have to search for the document in BSID and BSAD .
If it is the case of partial payment then BSID-BELNR doc u will find a field BSID-REBZG in which you will find the refrence field which is havving the BSAD-BELNR location . this is how it is mapped .
what is your ful req is not much cleared to me ,
rgd aryan

Invoice Reduction-Vendor error: only a higher amount invoiced is allowed

Hi,
I am trying to replicate the "Invoice Reduction" Scenario (for both Price and Quantity Variance scenario).
1) Created a PO for 25 PCE and made GR for 10 PCE (10 USD/PCE).
2) Entering Invoice for 25 PCE and Amount 2500 USD and I have selected correction ID as Vendor Error: Reduce Invoice. So when the document is posted system should generates the Invoice document and Credit memo.
But I am getting the error as mentioned in subject.
Please find below the Error description:
Vendor error: only a higher amount invoiced is allowed
Message no. M8582
Diagnosis
The item amount in the invoice of 100.00 is smaller than the item amount of 2,500.00 suggested by the system.
System response
You currently cannot enter an amount that is smaller than that expected by the system. This would lead to a credit memo for the vendor.
Procedure
You can change the default values to correspond to the invoice and then post the invoice.
Regards,
Hari.

Hi,
Please check if the PO is GR based invoice verification is checked.
since the GR is only done for the partial qty while you enter the invoice and reducing it system is giving the error.
If vendor sends a higher amount /qty when compared to PO you can try for a reduction.
for more information on when and how an invoice reduction need to be done,please check the below link.
http://help.sap.com/erp2005_ehp_04/helpdata/EN/a8/b99284452b11d189430000e829fbbd/frameset.htm
and http://help.sap.com/erp2005_ehp_04/helpdata/EN/d6/36451bca1a4a81b974bb9114e41458/frameset.htm
and
http://help.sap.com/erp2005_ehp_04/helpdata/EN/a8/b9975e452b11d189430000e829fbbd/frameset.htm
Regards,

Partial amount unblock through t code MRBR, it is possible - MRBR

HI FICO Expert,
I want to release partial amount unblock through t code MRBR, it is possible ?
Example :
At the time of Vendor Invoice booking total amount booked in BLOCKED FOR payment amount Rs 10000/-
now i want to release only Rs 9000/- balance in blocked for payment Rs 1000/-
Thanks
Kamlesh

Hi Kamlesh,
No, it's not possible. You can only remove payment block code in MRBR.
You might be able to respond to requirement by manipulating payment block and payment terms in FB02.
If it's inadequate, it will require a custom development.
regards,
Eddgar

Billing for partial amount

Hi Friends,
I need to do billing for partial amount where the quantity is only 1. As I know the solution for this is activating billing plans and giving the required % in Sale order. But I dont know what will be my % of billing until the time of billing. So I want to do billing for only part of the amount and should be able to do 2nd billing again for the balance amount and for the same 1 qty.
Is this possible? If so how?
Kumar

Hi Kumar,
You can try this way. Create this item as a value item in the sales order.Copy the item category "WKN" and rename it , but in the billing relevance maintain as "I" and If item is relevant for delivery , maintain that indicator and assign the billing plan to the item category. Now once you are in the sales order, system will propose the value as "0" to be billed on a particulat date. Once you are at billing, you will be knowing how much you have to bill the customer, now you come back to the sales order and change the value in the billing plan. And in item category(VOV7) MAINTAIN Completion rule as"E", So the item will be completed only when you fully invoice the customer or if you dont want that maintain item is complete at first reference. Kindly please let me know If you need any more information on this.
Regards,
Ram Pedarla

Can't settle an internal order by amount

My company wants to settle internal orders to a fixed asset by amount instead of equivalence number or %.
Can anyone describe in detail how to do this please.
Thanks and regards
Walter

HI,
as mentioned above, if the "amount settlement" indicator is set in the settlement profile that is assigned to your CO-order you can go to KOB5, select the order/line items you want to settle tick "final settlement" and maintain the settlement rule by entering "amounts" to be settled not only "percentage" or " equivalence numbers".
best regards, Christian

Internal Order settlment with Fixed amount

Hi. I'm having hard time. Please help me out.
Requirement:
I need to create settlement rule for Internal order.
When I do so, I need to define Fixed amount in OBJECT CURRENCY.
Given Condition:
Object Currency and Contorolling Area Currency is DIFFERENT.
(Controlling area currency is EURO, while Object currency is country local currency.)
Problem that I'm facing now:
When I try to create a settlement rule, it allows only Controlling area currency
for fixed amount, even though I need to create it with Object currency.
(Directly, the Field name is indicated as "Amount in EUR".
You know, usually we have 2 fields; 1 for value, 1 for currency. But in this case,
it seems that we have only 1 field for 1 fixed currency, which is Controlling area currency)
Is there any way to solve this issue?
I've looked into Settlement profile and Investment profile (for AuC order),
but both of configuration just had an indicator to enable fixed amount settlement,
but nothing about currency.

There is not a perfect solution, however you can check OSS note 769818 for some helpful hints. It sounds like you want to use this for settlment of investment measures. If that's the case, you may want to consider using line item settlment intead of summary settlement. You have a little more flexible with that type of settlement and it may get you closer to what you want.
thanks,

Internal Order Settlement by Amount

Dear Experts,
I have created a real internal order which has settlement profile by amount.
Now the scenario is, if I am booking an expense to this order in 1st month say of Rs. 1000, i want it to settle only Rs. 200/- to COPA in that period. again in next month i would again settle say Rs. 500 to COPA.
But, when I am settling the order in first month with Rs. 200, order gets settled completely. hence, the message is coming that the sender completely settled.
pl. suggest me that correct way to do this..
Thanks in Advance.
Warm Regards,
Sayu

Hi,
Now I could do the settlement by amount, but now the problem is that the system is allowing me to settle more than the debits in the order.
e.g. Debits to Order are 1000
in 1st period i have settled 800
in 2nd period, it is allowing to settle more than 200.
Regards,
Sayujya

Internal Order not allowing to decrease budget amount

Dear Experts
We have to close Internal Order no. 800001526 but system is not allowing to decrease budget amount from Rs. 2606000
Regards
Ajeesh

Hi Ajeesh,
I happen to go with Manikumar, because in the recent post we see either actuals/commitments Zero only, but when we see at your first screen, there we see total value (either actual/commitment) as 5212000, which is double of your budget i.e. 2606000, that's why there it is giving negative budget value of -2606000 (i.e. 2606000-5212000) which implies your budget has exhausted.
So when you post with 5212000, system hasn't stop you as you might have not had availability control or had tolerance limit for more than 200%.
Please if at all it is testing server, why don't you create one more order and check?
Regards...
Jose

Automatic carryforward only allowed for amount 0

On 4.7, we are attempting to process a payment for on a FY2007 Purchase order using MIRO. We are now in our FY2009 year but we are receiving the error message FMCF101 - Automatic carryforward is only allowed for amount 0. What could be the cause of this?
The PO was created on 03/21/2007. A goods receipt for the total quantity of the PO was entered on 06/27/2007. Two invoices were successfully processed on 02/28/2008 but when we attempt the final 3rd invoice for 06/30/08, we receive the error message.

If you have Periodic Based Encumbrance Tracking PBET active and you use the GR/IR updating in OFUP as well as you use the invoices to determine the CF level, then you MUST carry forward the GR - which in FM are considered invoices (same value type 54).
Trying to reduce the GR without having carried forward the GR is not valid and you will get the error "Automatic carryforward is only allowed for amount 0".
The only possibilities to avoid this error are:
1. Carry forward the GR from the previous fiscal year to the one being modified.
2. In OFUP do not use the invoice to determine the carry forward level.
3. Do not update both the GR and IR but only the IR
4. Do not use PBET. To update the GR in the previous FY or update it in the current FY without carry forward, contradicts PBET.

Internal order valid only for a given period

Dear All
I s there are way to maintian a validity period for a statistical order ??? We want our marketing budget to be broken down based on the month, based on an internal order which is only valid for a month.
Thank you
Gayani

Hi,
Go to KO02, enter to the order, then Menu - Edit - Lock - Set (to unlock Menu - Edit - Lock - Undo).
You can do it also for multiple I/O via KOK4.
Regards,
Eli

SWL SC only considers partial amount of Internal Order

Similar Messages

Maybe you are looking for