Sync a BlackBerry Remember Folder AFTER it's been created

I can imagine in the urgency of planning a BB "LACKberry" 10 native app IN THE EARLY DAYS (in truth, not too long ago) with designated people planning the roadmap of an app native to the upcoming BB 10, yet the with pressure from the higher-ups to CRANK SOMETHING OUT QUICKLY:
SCENARIO HYPOTHETICAL:
AMAZING THAT PEOPLE, SITTING IN LITTLE OFFICES CONFIGURING A NATIVE BB 10 APP WITHOUT THINKING OUTSIDE OF THE BOX. That is to say, that I can envision a bunch of people coming in with their coffee early in the morning way back when the pressure was on to "get something out there quickly to integrate in the new BB10" and no one thinking that if, in the creation of this new BB Remember App, that if you're going to make it native and a power app in relation to other parts of the BB 10 OS body SO CONSUMERS WOULD NOT LOOK ELSEWHERE (say in BB App World) for a memo/task/productivity app), that ANY AND ALL OPTIONS would be insisted upon for the convenience and high power user.
BUT, SUCH WAS NOT THE CASE HERE, as I have delved DEEP AS POSSIBLE into the all options that BB Remember does and "what it could do", yet BEREFT how limited this app really is in every sense of the word. Does anyone get tired of recommending apps outside of native BB apps when BlackBerry should be all inclusive so that the natural tendency is to not look elsewhere? To those who have BlackBerry in their blood, who wish not to look in app world all the time and want to be an all-BlackBerry-only con/pro-sumer, it is just sad...
"The Dilemma":
I'm finding it impossible to take an existing BlackBerry Remember Folder and edit it to "Sync". By default in 10.1 (Since AT&T is always last at giving an official update), I've 20 folders. When I click on edit, to edit for example, the name of the folder and color (Can't believe how limited these color choices are), if you pull down further my "Sync To" is grayed out.
Is there any way to change this? What this means that ONLY at the start of creating a new folder (Infancy stage of creation of a Remember Folder and color) can you use the pull down as to whether or not the folder is going to sync, in this case, my only available option is Evernote when there should be a SLEW OF SYNC OPTIONS.
Critical thought: But any existing ones I cannot edit to sync with anything "after" the fact. Maybe I am doing something wrong, but there's not a whole lot of use here as in BBOS was with my 4,780 memos and tasks that were perfectly synced together. In the twenty folders now with over 3,600 current entries, I am not going to create a "new" folder and jam them all into one and not have them segregated into folder sections just for the sake of syncing when they should sync 'at will' from and at any time and to any cloud service I choose or locally on the BB 10 device as well, e.g., "the media card"...
Just crazy. No thought-arresting sense, mitigating the love and passion that each native app should be planned for inside of the blood and veins of a BB device, so that people NEVER,....NEVER, look elsewhere...
Yes, I own a LACKberry... Z10

I thought I was the only user having probs with the BB Remember app., it rarely features in the forums and as yet I've had no helpful replies. My prob is that since upgrading to 10.2.0.424 the facility to order by due date does nothing, the tasks simply remain in alphabetical order. The help video shows a button to enable a due date, I don't have this but I am able to add a due date - just wont show tasks in due date order, although it will order by last am ended date or created date! Any help/ suggestions appreciated.

Similar Messages

What do i do with my downloads in my downloads folder after software has been updated? do i move it to trash? or??

what do i do with my downloads in my downloads folder after software has been updated? do i move it to trash? or??

So it would be safe to just delete them? the reason why i ask is because for example when i first stared using youtube on my macbook pro(OSX Lion) it required the flash update. I updated flash but the download still remained in the download file on the dock. So it would be safe to delete once it was updated correct?

CUP: Delete user certain time after request has been created

Hi,
Is it possible to define in CUP a delete account workflow that once the request has been created user deletion waits some time (i.e 1 month) before user is finally deleted? We would need a workflow without any approver.
Delete User request creation >> 1 month >> User is deleted
Thanks in advance. Best regards,
Imanol

Hi,
Automatically deleting user IDs after a specific # of days is not possible in CUP. However, while creating the stage, you can define the wait time and then trigger the escalation. You can make the escalation to the Security Manager who can immediately take up the proper action, i.e., deleting the ID or making it inactive.
Infact, this is the reason why it is recommended to have an alternative approver.
Hope this addresses your question.
Regards,
Raghu

Can I delete Original Media folder after its all been transcoded?

So i remember reading that most footage you import should be transcoded. Though Final Cut Pro "works natively with formats like h.264 and dslr movs, it is better to have it optimized into Pro Res and transcoded." Having listened to that, I have Optimized all of my media that I have importated however now I have double the media in my FCP Events folders because I have both Original Media and Transcoded media. This leads me to a few questions...
1) Can I delete the Original Media folder if all my my media is transcoded? How will this effect my timeline and projects? Will this free up space? How can I verify all of my clips have bene transcoded?
2) Can I delete the Transcoded Media and go back to using the Original Media? Will this mess up my timeline and projects that I have started editing or will it revert the media in my projects back to the Original? Which would run faster/better performacne Original Or Transcoded? I shoot all of my footage on a Canon 7d DSLR 24/30 fps 1080p, H.264.
3) What workflows have you used so that you dont dobule anything? If this project is a loss, what should I be doing in future events when importing? Should I send to Compressor and transcode there BEFORE I import into FCP. That way I am only importing the Transcoded stuff?
Thoughts?
Mike

1- Yes, you can delete the Original Media folder, FCP will only read from your Optimized Media folder then. But move it to the trash first, then launch FCP X and test it out, before emptying the trash.
2- Yes, again, test it as I mentioned in 1 above. Once you remove either Original or Optimized, it's gone, that's it.
3- Always let FCP do the transcoding, doing it in Compressor gains you nothing. You shold base your decision to optimize on the hardware you're using and the amount of storage space you have available. H.264 is super compressed. ProRes uncompresses it and is more of it's natural file size.

How to add a virtual disk into a 'guest VM' after VM has been created?

Well, it was easy when one need to add a virtual disk before creating a guest VM. All need to do was to edit the template and click on disk tab and create a virtual disk.
However the challenge comes after created a 'guest VM'. I need to add additional virtual disk into this 'guest VM'.
This is what I did.
Click on Repositories tab --> Under repositories--> Virtual Disks. There is a green "+" sign. Click on it. It says create virtual disk. Follow the instruction, I enter the virtual disk name, size, and select if it is spare or non-spare. Hit ok. Well, everythings seems fine.
Next, I click on the "blue folder" icon which indicated import virtual disk. It asked me about Virtual disk download location.
According to the manual, http://docs.oracle.com/cd/E27300_01/E27309/html/vmusg-repo.html#vmusg-repo-vdisk
Virtual Disk download location: The URL for the virtual disk file. The URL protocols supported are HTTP, HTTPS, and FTP. For example:http://example.com/vdisks/myvdisk.img
How can I determine what is the URL in my case?
Where is the newly created virtual disk located? Isn't it supposed to be in Oracle Server? But it doesn't have a http server running there.
Please help.
Thank you.

Virtual disks can only be added and removed at runtime from a PVM. You don't even need to know anything special. Just create the vdisk and use the VMs settings to occupy another slot with the new vdisk.
But as I said… this works only with PVMs, not HVMs. In case of a HVM, you will need to shut down the VM and add the disk afterwards, then fire it back up.
The little folder with the blue down arrow is for importing an existing vdisk file from a web- or ftp server. If you have already created the vdisk, you won't need that.

Loading photo to slide show after movie has been created

Hi Everyone,
I created a slide show on iMovie and thought I was done so I created a movie through the Media Share feature (to eventually burn on iDVD). Then, I realized there was one photo I hadn't yet included; so I went back and tried to insert that photo but it won't let me. Does iMovie know that you've already "finalized" a project and not let you make any changes to it after that? Is there any way around this without having to do the entire show over again?
Thanks,
Jen

Hey Dazlari,
I'm so sorry but I actually can't remember what I did! I haven't used iMovie for over a year. I'm not that tech savvy though so it couldn't have been that hard to do :-)
Keep experimenting...I hope you figure it out!
Best wishes,
Jen

How to add new folder in Aperture thats been created on hard drive?

Hey
This is probably a simple answer, but here it goes.
I manage all my photos in directories such as this:
2007
01 - January
02 - February
03 - March
etc..... however I just added the 2007 foler and all its subfolders to my drive tonight, however I can't sem to figure out how to easily add it to Aperture in order to read from those folders?
Thanks a lot

also, you can decide to ignore the import panel entirely, and import the folders by dragging and dropping them in your project list. if you drag multiple folders at once, they will be imported as multiple projects.
holding the Command and Option keys while doing this will result in a "referenced files" import. By default (without modifiers) the images get "managed" (i.e. copied into database).
my structure on HD is similar to yours. What I do in AP is that I create a blue folder first, name it 2007, and then drag folders from the mac os finder on that blue folder.
experiment with this and you'll find that it is much faster, gives more flexibility, and involves less repetitive actions than using the import folder.
one last thing: this action sees AP generating an error message, but the image that is said "not imported" still is, and all should function properly...
HTH
max

Billing Plan: order changes possible after FAZ has been created?

Hi together,
I've got a question regarding the billing plan functionality. Is it possible to change the order in case the FAZ is already created? Everytime when I try this the system increases the down payment value and a new FAZ will be created. Even when I enter a free of charge material the system creates a new FAZ with value 0... That#s strange, isnt'it?
Thanks for your help, Christian

Hi Stefen,
We can do this ...but you can not look those fields .but you can through error messgaes . this you can do from user eixts or using BADI's. write code in such manner once if document delivey after that if user want to change any data just through error messages for him.
Thanks,
saleem

Table does not Exist in Unix OS after it has been created In HTML_DB

I created a table in HTML_DB and can see the table fine in my HTML_DB application. However, when I go to the Unix OS and try to look up the database using SQL*Plus, I am getting an error saying the table does not exist. Any help as to why this is happening would be appreciated.
Kelly

When I go to the Unix OS, I then try and search for the table in the exact schema that I used in >HTML_DB.I don't see what the Unix OS has to do with it here...do you mean you're connecting via SQLPlus?
If you're connecting via SQLPlus, which schema are you connecting to? (i.e. are you certain you're connecting to the same schema that the table was created under when you were connected to Application Express).

Cannot save form error after form has been created

I've created a form and fucntions well.
It has been saved as a interactive pdf.
When people with just the acrobat reader open the file and click anywhere on the form a window pops up stating that
" you cannot save form..." then the OK button appears
You are able to enter data into the fields and print, but can only save the form as a blank copy.
Any help would be much appreciated.

You need to reader enable the form in Adobe Acrobat. Click on Advanced >
Enable Usage Rights in Adobe Reader and Click Save Now. You can then save a
reader enabled version of the form and users will be able to save their data
in the form.

How do I insert additional text into a form after it has been created? - Acrobat Pro XI

I am trying to add additional text and fields into the middle of a form I have previously created. I can copy and paste the information in there but it does not shift the lines below it down. Is there any easy way to accomplish this without having to recreate the entire form?
I appreciate any help I can get.
~Shannon

If you need to make such changes to the layout of the form, you should go back to the source document, edit it, and generate a new PDF. You can then replace the pages of the old document with the new pages. Any fields that you've already added will be retained and can be move to their new positions and you can add any new ones you need.

Adobe X Standard cannot load/create EuroRoman.ttf font after file has been created using AutoCAD LT 2015. File was loaded and refereneced with Distiller X. Font has been installed to Win7

Need suggestion on how to get Adobe X to create/load the font. Others in the office can create the same Adobe file with no issues. Help please.

You have the required Xorg drivers and those errors appear to be expected (https://www.virtualbox.org/ticket/4789). As a matter of fact, Xorg is terminating successfully. Just to make sure, is your ~/.xinitrc setup correctly?

Create Letter after applicant has been created WS00400019

Hello,
Firstly i would like to find out if it is possible for this subworkflow to be processed in the foreground, because when it is executed it gives me an error stating that "Error when defining successor for node 0000000004. I've checked the binding and there are no errors found.
Secondly is the business object application with the event created, correct for this workflow.

[Check SAP HELP Document 1|http://help.sap.com/erp2005_ehp_04/helpdata/EN/04/92897146f311d189470000e829fbbd/frameset.htm]
[SAP Help Document2|http://help.sap.com/erp2005_ehp_04/helpdata/EN/04/92895746f311d189470000e829fbbd/frameset.htm]

Adding elements to a Dialog after it's been created using a resource string

I can add elements using add but not with a resource string.
The following works in ExtendScript Toolkit but not in Photoshop. Any idea why?
var window_res = "dialog { \
     orientation: 'row', \
     alignChildren: 'top', \
     preferredSize: [500, 500], \
var btnPnlResource = "Panel { \
     orientation:'row', \
     text: 'Build it', \
     testBtn: Button { text:'Test' }, \
     buildBtn: Button { text:'Build', properties:{name:'ok'} }, \
     cancelBtn: Button { text:'Cancel', properties:{name:'cancel'} } \
var w = new Window(window_res, 'Testing');
w.panel = w.add(btnPnlResource);
w.show();
The error I'm getting is Server Interface error "
As a side note: I copied the code from Javascript Tools Guide but I had to remove ""btnPnl: " from the beginning of the btnPnlResource string. Otherwise you get "btnPnl: is unknown or invalid in this context" error.

Actually Paul, it doesn't look like its the bounds that make your code work. Just changing the P in Panel to lowercase p does the trick:
var btnPnlResource = "panel { \
     orientation:'row', \
     text: 'Build it', \
     testBtn: Button { text:'Test' }, \
     buildBtn: Button { text:'Build', properties:{name:'ok'} }, \
     cancelBtn: Button { text:'Cancel', properties:{name:'cancel'} } \
That must be a bug, no?

Printing Purchase Orders after they have been created using BAPI_PO_CREATE1

Hi
We have a requirement to develop a Z program to to alloow certain users to create and print "special" dummy Purchase Orders (PO).
Using BAPI_PO_CREATE1 I have been able to create the PO no problem. But how on earth do you get them to physically print out ?
BAPI_PO_CREATE1 is meant to be an alternative to ME21N. In ME21N you can create a "PO message" which is actually a print output of the PO) and have it sent to the spool, depending on config. However, you can't use BDC with ME21N.
I expected the BAPI to have some sort of table/structure to pass print parameters that emulated ME21N's PO message, but there is none.
Anybody done this ?
cheers Hugh

Well, if you had your PO output configured to print immediately when the PO is created, then the BAPI call would result in a printout.
But if you don't want to always print a PO when a new document is created, you could set up a new output type for 'print immediately' and then attach a condition in the output configuration that checks if a certain criterion is met (so for instance if the PO was created via the BAPI), and only if this condition is met would the processing continue.
That way, you could keep the current PO output process (on request only), and have a conditional output that'd only be processed for POs created by the BAPI.

Sync a BlackBerry Remember Folder AFTER it's been created

Similar Messages

Maybe you are looking for