Synchronising postal addresses to Motorola V3x

Hi,
I have been using iSync with my Motorola V3x for a while now, but I have noticed that if I add a postal address to a contact and then Synchronise in iSync, the address won't copy to the contact on the phone. Birth dates do not copy either. Very frustrating!
I can send the vcard manually from the address book and when I store them on the phone the postal address and birth date are there.
Any ideas?

Can anyone help me?

Similar Messages

Postal addresses not synchronising from Outlook

I just got a Nokia 6303 Classic. I installed PC Suite v 7.1.40.1 and synchronised with Outlook 2007 (SP2) and all went as I expected. I then updated the phone's firmware from v 8.9 to v 9.1 and synchronised again. This time I lost nearly all the postal addresses from my Contacts on the phone. The only two that made it to the phone (out of over 600) are two that have a Business address - and those two have nothing in the 'Name' field so cannot be searched for on the phone! All my other contacts have only a Home address and none of these addresses have syncronised.
How can I get all my contacts' home addresses to synchronise to the phone??
I'm running Windows Vista SP2.

I can't work out how to edit my own post so have to use Reply - sorry.
I found a work-around - I deleted all the contacts from the phone, then synced with Outlook again and this time got the postal addresses.
But I don't want to do this every time as it takes ages - I need to know how to re-sync without losing all the postal addresses.
I tried Ovi suite too but that was awful - and didn't help with the address problem.

How can I modify an incorrect mailing address on my AppleCare Protection Plan certificate? After I registered a new product with AppleCare I realised that I'd entered the wrong postal address and I need to update it to show my correct address.

I need to modify an incorrect mailing address on my AppleCare Protection Plan certificate. After I registered a new product with AppleCare I realised that I'd entered the wrong postal address during the registration process and now I need to update my details to show my correct address. I've been trying for several hours to find a way to modify my address on the AppleCare site, with no success. Any help/advice would be greatly appreciated!

Contacting Apple World Wide for Support and Service
http://support.apple.com/kb/HE57
Apple Contact USA
http://www.apple.com/contact/

Export postal address from address book

Is there a way to export all of my postal address' from my address book to sticky labels for postage?

You should print them (link).

Error at Motorola v3x

HELP!!!
I installed a J2ME application on my Motorola v3x.
when i run the application i get the following error:
"Cannot create player"
The code seems to be OK, I checked it on some Sony Ericsson emulators. I didn't find a suitable emulators for my motorola device.
Here is the code:
package videoPlayer;
import javax.microedition.midlet.*;
import javax.microedition.lcdui.*;
/** A simple video player MIDlet using JSR 135 - Mobile Media API */
public class VideoPlayer extends MIDlet implements CommandListener
     private Command exitCommand;
     private Command playCommand;
     private Command contentTypeCommand;
     private Display display;
     private TextField textField;
     public Form form;
     private Gauge gauge;
     private static final int GAUGE_LEVELS = 4;
     private static final int GAUGE_MAX = 12;
     private static final String DEFAULT_URL = "http://localhost/test.mpg";
     public VideoPlayer() {
          display = Display.getDisplay(this);
          form = new Form("Video Player");
          textField = new TextField("Video URL", DEFAULT_URL, 100, TextField.ANY);
          gauge = new Gauge("Acquiring video", false, GAUGE_MAX, 0);
          exitCommand = new Command("Exit", Command.EXIT, 2);
          playCommand = new Command("Play", Command.SCREEN, 1);
          contentTypeCommand = new Command("Supported media types", Command.SCREEN, 2);
          form.addCommand(playCommand);
          form.addCommand(exitCommand);
          form.addCommand(contentTypeCommand);
          form.setCommandListener(this);
          form.append(textField);
     public void startApp(){
          display.setCurrent(form);
     public void pauseApp(){
     public void destroyApp(boolean unconditional){
     public void commandAction(Command c, Displayable s){
          if(c == exitCommand){
               destroyApp(false);
               notifyDestroyed();
          else if(c == playCommand){
               gauge.setValue(0);
               form.append(gauge);
               VideoCanvas videoCanvas = new VideoCanvas(this);
               videoCanvas.initializeVideo(textField.getString());
          else if (c == contentTypeCommand){
               String url = textField.getString();
               int position = url.indexOf(':');
               String protocol = url.substring(0, position);
               SupportedTypes typesUI = new SupportedTypes(this, protocol);
               display.setCurrent(typesUI);
     public void updateGauge(){
          int current = gauge.getValue();
          current = (current + GAUGE_MAX/GAUGE_LEVELS);
gauge.setValue(current);
package videoPlayer;
import javax.microedition.lcdui.*;
import javax.microedition.media.*;
import javax.microedition.media.control.*;
import java.io.*;
/** Acquires the video content and renders it */
public class VideoCanvas extends Canvas implements CommandListener, PlayerListener, Runnable {
     private VideoPlayer parent;
     private Display display;
     private Player player;
     private VideoControl videoControl;
     private String url;
     private Thread initializer;
     private Command close;
     private Command rePlay;
     public VideoCanvas(VideoPlayer parent){
          super();
          this.parent = parent;
          display = Display.getDisplay(parent);
          close = new Command("close", Command.SCREEN, 1);
          addCommand(close);
          setCommandListener(this);
     public void initializeVideo(String url){
          this.url = url;
          initializer = new Thread(this);
          initializer.start();
     public void run(){
          try {
               player = Manager.createPlayer(url);
               parent.updateGauge();
               player.addPlayerListener(this);
               player.realize();
               parent.updateGauge();
               player.prefetch();
               parent.updateGauge();
} catch (IOException ioe) {
               Alert alert = new Alert("IOException thrown", ioe.getMessage(), null, AlertType.ERROR);
               display.setCurrent(alert);
} catch (MediaException me) {
               Alert alert = new Alert("MediaException thrown", me.getMessage(), null, AlertType.ERROR);
               display.setCurrent(alert);
          playVideo();
     public void playVideo(){
          try {
// Get the video control and set it to the current display.
videoControl = (VideoControl)player.getControl("VideoControl");
if (videoControl != null) {
                    videoControl.initDisplayMode(videoControl.USE_DIRECT_VIDEO, this);
               parent.updateGauge();
               int cHeight = this.getHeight();
               int cWidth = this.getWidth();
               videoControl.setDisplaySize(cWidth, cHeight);
               display.setCurrent(this);
               videoControl.setVisible(true);
player.start();
} catch (MediaException me) {
               Alert alert = new Alert("MediaException thrown", me.getMessage(), null, AlertType.ERROR);
               display.setCurrent(alert);
     /** Paints background color */
     public void paint(Graphics g){
          g.setColor(128, 128, 128);
          g.fillRect(0, 0, getWidth(), getHeight());
     public void playerUpdate(Player p, String event, Object eventData) {
          //add "Replay" option when video is finished
          if (event == PlayerListener.END_OF_MEDIA)
               if (rePlay == null)
                    rePlay = new Command("re-play", Command.SCREEN, 1);
                    addCommand(rePlay);
     public void commandAction(Command c, Displayable s) {
          if(c == rePlay){
               try{
                    player.start();
               } catch (MediaException me) {
                    Alert alert = new Alert("MediaException thrown", me.getMessage(), null, AlertType.ERROR);
                    display.setCurrent(alert);
          else if(c == close){
               player.close();
               parent.form.delete(1);
               display.setCurrent(parent.form);
               url=null;
               parent=null;
}

I downloaded and installed the SDK of Motorola and when i run my application i get the error:
"createPlayer() filed"
I added to my code the following lines:
String[] types = Manager.getSupportedContentTypes(protocol);
          for(int i = 0; i < types.length; i++) {
               append(new TextField("http", types, 20, TextField.ANY));
When i run the RAZR_v3x Emolator i get that the only video format which it supports is .mng, but i checked in Motorola web site about this device and i saw that it supports MPEG4, WMA, MP3 and Real Video/Audio files.
Do you something about that??
Thanks

Can anyone tell me a postal address to allow me to...

Good evening folks,
I've had a pretty horrible time dealing with BT customer services recently. I've needed to contact them because my broadband has for quite a few months now has been dropping constantly, and even when it recovers it's often at a disgracefully low speed (for example as I write this I've got a .15 meg connection).
I've made umpteen telephone calls and had many difficult conversations with people with accents that I find difficult to understand or be understood. I've tried verbally to explain that I now want to complain, especially as no one will take ownership beyond the duration of the call for fixing my problem. I finally managed to get an engineer to attend earlier this week, who couldn't find anything wrong, and the connection is back to its old tricks of constantly dropping. The thought of having to deal with BT's customer services again is actually a source of considerable anxiety and is making me feel I'll on occasion. I've had enough and want to complain in writing by recorded delivery, including my MP, but I can't find a postal address anywhere on the website.
Can anyone help? Does anyone have for example got an address for a chairman or other suitably senior person?

IMJolly,
i ran the checker and got this
Telephone Number xxx on Exchange CAMBUSLANG is served by Cabinet 14
Featured ProductsDownstream Line Rate(Mbps)Upstream Line Rate(Mbps)Downstream Range(Mbps)Availability Date High Low High Low
FTTC Range A (Clean)
54.5
54.5
18
18
31-May-14
FTTC Range B (Impacted)
54.5
54.5
18
18
31-May-14
WBC ADSL 2+
Up to 7.5
4.5 to 11
Available
WBC ADSL 2+ Annex M
Up to 7.5
Up to 1
4.5 to 11
Available
ADSL Max
Up to 4.5
3.5 to 7.5
Available
WBC Fixed Rate
2
Available
Fixed Rate
2
Available
Other Offerings
Fibre Multicast
31-May-14
Copper Multicast
Available
John,
Yes we have one extension, but it is not currently used. My wife complains that the noise on that line is very poor.
Ectophile,
Thanks for address.

Brand New Macbook Air. How to update iPhoto without giving postal address?

I have a brand new New Macbook Air. Since the same day I bought it I keep getting software update notifications for iPhoto and iMovie, but when I try to download them Apple asks for my postal address and phone numbers. This is outrageous. Apple will not allow me to leave any address fields blank. No way are they are going to get my address to put on their database, I would rather switch off iPhoto and iMovie update notifications, but can't see a way to do this. Can anyone help?

Have you tried calling Apple Care? They're very helpful and could help you trouble-shoot this.
I agree with you-- one should not have to give one's credit card and address information, unless one wants to, to get an update.
Even on a purely practical level, there are people who do not have credit cards.
One other thought-- these are updates, right? Or, are they pitches for a new version of the software programs-- which could have to be purchased? If they are new progrms, in which case, you would have to supply credit card and address to buy them.

Customer services postal address?

I want to send a formal complant letter to BT but can not find an postal address anywhere! You would think they are hiding on purpose...
Does anyone have a postal address for customer services? I do not want to use the email link as that will most likely lead to yet more pointless telephone conversations with people that cannot help.
thanks in advance.

Hi Guys,
Thanks for posting. I'm sure I can help with any complaints you might have. Utopian, did you receive any further responses from us? Can you check your junk folder just in case it's slipped in there. The address posted by Pasha is correct but if you want to drop me an email to [email protected] I'll be happy to look into any queries you might have.
Ta
David
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

Does the 8310 display full postal addresses?

Hello, I have just synchronized my blackberry 8310 with the desktop manager. It has imported all of my contacts onto my phone however, I can not get the phone to display the entire postal address for my contact....it will only display the city and postcode. Is there a way to change the settings to display this?

did you try to fill in the address manually ?
I have many fields for the Home address :
- Address 1
- Address 2
- City
- State/Prov.
- Zip/Postal Code
- Country
if it works that way, it means you have to set up the synchronization betweeb your WAB (Windows Address Book) and the Blackberry. There's a screen in your Blackberry Desktop Manager to tell which field in the WAB goes to which field in the Blackberry contact.
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Table for Email and Postal Address for payers

Hi ,
I would like to know how to download email address and postal address of list of payers i have. Which is the table that has this data?

Dear Vinod,
Addresses of both Customers & Vendors is stored in ADRC tabbe. ADRC is master table of all Addresses in the system.
From KNA1 take Customer Code & Address field.
From ADRC take list of all address. Here Address Number field is same as Address field in Csutomer Master.
In Excel run Vlookup on above two files with Address & address numbers feilds as common.
Hope the above is useful..
Reward if you like to..
Thanks,
Jignesh Mehta
Mumbai
98700 10230

Gconsync drops postal addresses with big Address Book changes?

After many years of procrastinating, I've thrown a lot of contacts into my Address Book just in time to send Christmas cards. I've configured Address Book to talk with Gmail, which causes gconsync to run once an hour.
I've observed that when I do large amounts of changes in Address Book, like a dozen or so in an hour, the postal addresses of random contacts get lost at the Google end. Once this happens, efforts to fix the contacts one-by-one seem pointless. I have to save/export my Mac Address Book, delete contacts at both ends, then reload from my backup to make things right.
Anyone else seen this behavior?

Finally fixed it. I am quite sure one of your address books is messed up. To fix it:
1. Figure out which address book is messed up. I have three, iPhone, iPad, iMac. Shut off iCloud on one of them and try address book updates on the other two. When the problem disappears, you will know which address book is messed up.
2. Next fix the address book on the errant device. I did it by restoring, WITHOUT using a backup. Can't use a backup because the same error will be there. This is a pain because you need to reorganize your aps, logins etc. So, you might want to try shutting off iCloud and removing the address book from the device. Then turn iCloud back on. It will load a new address book. I don't know if this will fix the problem. Might be hidden files that have the problem.
3. This, by the way, also caused a huge power drain for me. You can tell if you have the same problem by opening address book and checking if it is continually trying to sync.
Bob
[email protected]

Postal address listed in reverse order

My postal addresses in my adress book are now in reverse order, in other words listed zip first, state, city, street?
It only changed on my iphone? My Mac is fine, my iPad too. Any ideas?
Bobby

Check Settings>General>International>Region Format and make sure that it's set to your location.

Parsing Postal Address

I'm writing a web-based application and I need to parse the line 1 of an address. I was wondering if there is an API to do this for me. I didn't see anything in the JavaDocs. I need to parse the address and then validate it. The validation isn't as necessary since I have access to a database and can check for addresses and.or closely matching addresses already. I just need to make sure I'm getting the correct information from the text field.
So any tips on parsing a US Postal address?
thanks

If I asked that question, it is just because I happen to work in the field of semantic extraction and this is definitely not a simple question.
Still, since this is 'only' about postal addresses, you might be able to program some filters :
- one for the Zip code with that kind of use :
ZipCodeFilter myZipCodeFilter = new ZipCodeFilter();
boolean foundZipCode = myZipCodeFilter.isZipCode(myString);
- a filter for the towns. For this one the best way is to find a lexicon somewhere on the web that contains all US town names. Best luck on that.
- for the street address, this is a lot trickier. You have to have a good idea about how they normally look like. When given a street address, you want to verify that it follows a certain given pattern. That is possible only if you already have found the street number, the street type (boulevard, street, road, avenue and all their other written forms, bd, st, rd, av...) and finally the street name itself.
This is really not simple so you really would be better off giving a definite pattern to your users.
Hope this helps and is not completely out of the subject.

HT201401 Postal address

I've just registered to send my i phone for a service. However I did not see a postal address I am supposed to send my faulty device too?

You will have to restore your phone to get rid of it.

Change postal address

I would like to know how to change my postal address please... I can't do it on my account, there is just the option for e-mail address. Thank you

You will have to ring EE and speak to customer service then.

Synchronising postal addresses to Motorola V3x

Similar Messages

Maybe you are looking for