Syntax error in ABAP HR program
Hello Experts,
I am new to programming in HR. I am getting a syntax error "PERNR is not defined for the current logical database" with the following piece of code.
TABLES: PERNR.
INFOTYPES: 0002, 0006.
GET PERNR.
PROVIDE * FROM P0002 BETWEEN PN-BEGDA AND PN-ENDDA.
WRITE: P0002-PERNR, P0002-NACHN, P0002-VORNA.
ENDPROVIDE.
Am I missing a statement or something needs to be configured in the system?
Any help will be highly appreciated.
thanks...
Rony.
HI,
your code works perfectly well.. I have added the PNP logical database and selection screen 100... i think you r not added this PNP logical database
*& Report ZTESTPRG *
REPORT ZTESTPRG .
TABLES: PERNR.
INFOTYPES: 0002, 0006.
GET PERNR.
PROVIDE * FROM P0002 BETWEEN PN-BEGDA AND PN-ENDDA.
WRITE: P0002-PERNR, P0002-NACHN, P0002-VORNA.
ENDPROVIDE.
Thanks
mahesh
Similar Messages
-
InfoSet Query: Syntax Error while generating the program.
Dear All,
I have a Query in CRM system which contains an Infoset based on LDB.
The InfoSet Query throws up a Syntax error while generating the program.
So, we are not able to change the Infoset using the Infoset Query through SQ01.
The error is as follows:-
Syntax error in program "AQZZ==/SAPQUERY/CRM_ACTMON1 ".
Error in the ABAP Application Program
The current ABAP program "CL_QUERY_OUTPUT_DEFINITION====CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "AQZZ==/SAPQUERY/CRM_ACTMON1 "
in include "AQZZ==/SAPQUERY/CRM_ACTMON1 " in
line 28:
""CRMT_REPORT_LOCATORLIST" must be a flat structure. You cannot use int"
"ernal tables, strings, references, or structures as components. -"
Please help me arrive at an solution, so that we are able to change the Infoset through the InfoSet Query.
Awaiting your reply as soon as possible.
Thanks and Regards,
Pankaj.There is an error in your query, specifically in the definition of CRMT_REPORT_LOCATORLIST. In the short dump (transaction ST22) you will see more details and the exact location of an error if you just scroll down.
I can't tell more because this problem is specific to your system, to which I have no access. Read the whole dump and look at all the objects mentioned there. -
How to check syntax errors in ABAP Queries
HI Guys,
How to check syntax errors in ABAP queries, Can please provide the T-Codes.
Advande thanks to everybody.
Thanks,
GourisankarHi
with these you can check syntax errors and performance points
Hi
these all are doing t he same thing that is checking the program for better performance
Tools for Performance Analysis
Run time analysis transaction SE30
SQL Trace transaction ST05
Extended Program Check (SLIN)
Code Inspector ( SCI)
Run time analysis transaction SE30 :This transaction gives all the analysis of an ABAP program with respect to the database and the non-database processing.
SQL Trace transaction ST05: The trace list has many lines that are not related to the SELECT statement in the ABAP program. This is because the execution of any ABAP program requires additional administrative SQL calls. To restrict the list output, use the filter introducing the trace list.
The trace list contains different SQL statements simultaneously related to the one SELECT statement in the ABAP program. This is because the R/3 Database Interface - a sophisticated component of the R/3 Application Server - maps every Open SQL statement to one or a series of physical database calls and brings it to execution. This mapping, crucial to R/3s performance, depends on the particular call and database system. For example, the SELECT-ENDSELECT loop on a particular database table of the ABAP program would be mapped to a sequence PREPARE-OPEN-FETCH of physical calls in an Oracle environment.
The WHERE clause in the trace list's SQL statement is different from the WHERE clause in the ABAP statement. This is because in an R/3 system, a client is a self-contained unit with separate master records and its own set of table data (in commercial, organizational, and technical terms). With ABAP, every Open SQL statement automatically executes within the correct client environment. For this reason, a condition with the actual client code is added to every WHERE clause if a client field is a component of the searched table.
To see a statement's execution plan, just position the cursor on the PREPARE statement and choose Explain SQL. A detailed explanation of the execution plan depends on the database system in use.
Extended Program Check
This can be called in through transaction SE38 or through transaction SLIN. This indicates possible problems that may cause performance problems.
Code Inspector (SCI)
You can call the Code Inspector from the ABAP Editor (SE38), the Function Builder (SE37), the Class Builder (SE24), or as a separate transaction (SCI).
The Code Inspector indicates possible problems. However, note that, especially with performance issues: There is no rule without exception. If a program passes an inspection, it does not necessarily mean that this program will have no performance problems.
reward if usefull -
Syntax error in SAP-standard program
Hi experts,
i am facing syntax error in sap standard program.how i can solve that error .
Error in include LFKPZTOP and errro is at line 70.
please help me ASAP.
Thanx & Rgds
ZebaHello Zeba,
go to include LFKPZTOP and check in line 70.
if you are not able to solve that.
post the same line, so that we can understand what is error.
as of my checking the error is "iban is already defined in the include structure bus0bk ,
but i think it dosn't effect your programing.
Regards!
Edited by: Prasanth M on Feb 10, 2009 5:04 PM -
Syntax Error when generate print program in HRFORMS
Dear All,
I created form for payslip using HRFORMS, the name form is ZPS_TPI_01. When I activate the form, the error raised: Generated print program contains a syntax error
Diagnosis
Generated print program /PYXXFO/ZPS_TPI_01_PRNT conains a syntax error in line 9 of include /PYXXFO?ZPS_TPI_01_PAYR.
I have already apply note 878168 but it is not work.
Please advise me.
Thank you,hi,
can you let me know for which country are you trying to generate the HR form for payslip?
There are certain countries for which payslip isnt supported.
For such countries you get a similar error.
Thank you,
Jose -
Syntax Error while running "RFBILA00" program
Hello,
I am encountering some issues while trying to run reports that use table "FAGLFREESEL". The below error is for report "RFBILA00":
Short Text
Syntax error in program "RFBILA00 ".
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLALDB" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "RFBILA00 " in include "RFBILA00
" in
line 46:
""FAGLFREESEL" muß eine flache Struktur sein. Interne Tabellen, Referen"
"zen, Strings und Strukturen sind als Komponenten verboten."
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
Error in the ABAP Application Program
The current ABAP program "SAPLALDB" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
Any sugestions on how to fix this would be greatly appreaciated.
Thank you!Hello Constantin,
As the message suggests, FAGLFREESEL should be a Structure. CHeck in your system whether it has been created as a sturcture.
Have you checked SAP Service marketplace for the SAP Note. There are couple of SAP notes available for 2013 for few countries. Check whether anything applicable to your country.
If not, raise a OSS note with SAP.
BR
Amitash -
Syntax error in standard SAP program.
Can someone help me. I'm getting the following error while executing
"Include /sapboq/bos_lbos01top, No component exists with the name /sapboq/mitem. Check the program SAPLBOS01"
Error in the ABAP Application Program
The current ABAP program "BS01_SALESORDER_GETDETAIL=====FT" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "SAPLBOS01 " in include
"/SAPBOQ/BOS_LBOS01TOP " in
line 9:
"No component exists with the name "/SAPBOQ/MITEM". ."
Edited by: nithinrayal on Jul 12, 2010 9:54 PMHi,
Go to txn SE38 and display program "BS01_SALESORDER_GETDETAIL=====FT". Then do a syntax check. It should tell you what is the error.
I guess its some support pack that is missing. Try contacting SAP for this.
Regards
Prasenjit -
Hi All,
We are facing syntax erro with ABAP query.
We have a infoset/query which is perfectly working in one system and we downloaded the both infoset and query from this system.But the same query when it is uploaded to other system is not working.
Infoset is not giving any syntax error while activation. Morever, the generated report struture is also different from the other system. In old system, report was having one include for declaration and other for data retrieval process etc.
Can you please help us to resolve this issue?
ThanksHi,
The query generated is based on the table structures available as they are used, etc.
So please check if there is any difference in the fields available in the tables used, LDB used if any.
In addition, may be few of the properties of the SAP query and info set does not get copied properly.
and after activating the info set only, activate the query, etc...check them once again.
Regards,
Santhosh. -
Error in ABAP Objects program - SAP BI
Dear All,
While trying to update infoobject /BIC/ZGROSSPRI in an ODS in BI through an update routine, a syntax error is thrown when I am trying to define a variable of type tys_TG_1-/BIC/ZGROSSPRI. How is it possible to define a variable of type target field(Infoobject) ?
For instance,
DATA: VALUE TYPE tys_TG_1-/BIC/ZGROSSPRI.
The error is :
E:Field "_ty_s_TG_1-/BIC/ZGROSSPRI" is unknown. It is neither in one of the
specified tables nor defined by a "DATA" statement. "DATA" statement.
tys_TG_1-/BIC/ZGROSSPRI is already defined in the Class section as below
TYPES:
BEGIN OF tys_TG_1,
InfoObject: ZGROSSPRI Gross Price in Statistical Currency.
/BIC/ZGROSSPRI TYPE /BIC/OIZGROSSPRI,
END OF tys_TG_1.
Moderator message: please use a more meaningful subject line next time!
Edited by: Thomas Zloch on Apr 10, 2010 7:03 PMHi,
Please use :
DATA: VALUE TYPE /BIC/OIZGROSSPRI.
-Vikram -
Syntax error in ABAP query after implement patch
Dear All,
After implement patch from SAPKA46C39 to SAPKA46C53, we have syntax error in our query.
our SAP release version is 46C.
The error in query is -The data object "R01" does not have a component called "046" -
We don't found any SAP notes that match for our error.
Anyone ..please help...
Thanks a lot...
BuditutaHi,
The query generated is based on the table structures available as they are used, etc.
So please check if there is any difference in the fields available in the tables used, LDB used if any.
In addition, may be few of the properties of the SAP query and info set does not get copied properly.
and after activating the info set only, activate the query, etc...check them once again.
Regards,
Santhosh. -
Error in Abap Application Program
I am getting following dump .
The current ABAP program SAPMSSY1 had to be terminated because it has come across a statement that unfortunately not executed.
Error analysis: An RFC call (Remote Function Call) was sent with the invalid user ID "JLIANG ". Or the calling system is not registered as trusted system in the target system.
It also saying The function module "SLIM_CONTROL_USMM" is called,
but cannot be found in the library.
above error I am getting how to correct the error.Hi,
Try to put this kind of questions in ABAP general forum for a prompt reply.
First check the Remote Connection using the Tcode SM59 and that the user is correct or not. The user must be existing in the Remote System.
For the second part of the program you need to check in the destination system whether the function module is existing or not. Also check whether the latest ABAP SP has been applied or not.
Hope this will help.
Thanks,
Samantak. -
Syntax error in program "SAPLXRSA " -SENT
Hi Guys,
I have done user exit in R/3 datasource when I do the test extraction using RSA3 and geting the data without any error. I've transport the requet to Test Box and tried to do the extraction in TestBox and getting the below SYNTAX Error message. Kindly advise it's very URGET. Thanks in advance.
ShrtText
Syntax error in program "SAPLXRSA ".
What happened?
Error in ABAP application program.
The current ABAP program "SAPLRSAP" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
In program "SAPLXRSA ", the following syntax error occurred
in the Include "ZXRSAU01 " in line 21:
"Field "ZOXPRO0043" is unknown. It is neither in one of the specified t"
"ables nor defined by a "DATA" statement. "DATA" statement."
Author and last person to change the Include are:
Author "SAPCHEOLENG "
Last changed by "CCEV200 "
What can you do?
Please eliminate the error by performing a syntax check
(or an extended program check) on the program "SAPLXRSA ".
You can also perform the syntax check from the ABAP/4 Editor.
If the problem persists, proceed as follows:
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
is especially useful if you want to keep a particular message.
Error analysis
In program "SAPLXRSA ", the following syntax error occurred:
"Field "ZOXPRO0043" is unknown. It is neither in one of the specified t"
"ables nor defined by a "DATA" statement. "DATA" statement."
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If you cannot solve the problem yourself and you wish to send
an error message to SAP, include the following documents:
1. A printout of the problem description (short dump)
To obtain this, select in the current display "System->List->
Save->Local File (unconverted)".
2. A suitable printout of the system log
To obtain this, call the system log through transaction SM21.
Limit the time interval to 10 minutes before and 5 minutes
after the short dump. In the display, then select the function
"System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, select the Editor function "Further Utilities->
Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
System environment
SAP Release.............. "640"
Application server....... "hawk"
Network address.......... "137.132.12.22"
Operating system......... "HP-UX"
Release.................. "B.11.23"
Hardware type............ "ia64"
Character length......... 8 Bits
Pointer length........... 64 Bits
Work process number...... 0
Short dump setting....... "full"
Database server.......... "hawk"
Database type............ "ORACLE"
Database name............ "QAS"
Database owner........... "SAPR3"
Character set............ "en_US.iso88591"
SAP kernel............... "640"
Created on............... "Oct 16 2006 20:35:55"
Created in............... "HP-UX B.11.23 U ia64"
Database version......... "OCI_920 "
Patch level.............. "153"
Patch text............... " "
Supported environment....
Database................. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE
10.2.0.."
SAP database version..... "640"
Operating system......... "HP-UX B.11"
Memory usage.............
Roll..................... 16128
EM....................... 12569760
Heap..................... 0
Page..................... 65536
MM Used.................. 1716768
MM Free.................. 2470608
SAP Release.............. "640"
User and Transaction
Client.............. 220
User................ "CCEENGG"
Language key........ "E"
Transaction......... "RSA3 "
Program............. "SAPLRSAP"
Screen.............. "SAPMSSY0 1000"
Screen line......... 6
Information on where terminated
The termination occurred in the ABAP program "SAPLRSAP" in
"CALL_DATA_CUSTOMER_FUNCTION".
The main program was "RSFHGEN2 ".
The termination occurred in line 96 of the source code of the (Include)
program "LRSAPF06"
of the source code of program "LRSAPF06" (when calling the editor 960).
Source Code Extract
Line
SourceCde
66
CALL FUNCTION BW_BTE_CALL_BW204010_E
67
EXPORTING
68
I_DATASOURCE = L_DATASOURCE
69
I_UPDMODE = P_UPDMODE
70
TABLES
71
I_T_SELECT = P_T_SELECT
72
I_T_FIELDS = P_T_FIELDS
73
C_T_DATA = P_T_DATA
74
C_T_MESSAGES = L_T_MESSAGES
75
EXCEPTIONS
76
OTHERS = 1.
77
DESCRIBE TABLE P_T_DATA LINES L_LINES.
78
MESSAGE S408 WITH L_LINES.
79
Handle BTE-Exit error messages
80
IF SY-SUBRC <> 0.
81
P_SUBRC = SY-SUBRC.
82
IF 1 = 2. MESSAGE E021 WITH ''. ENDIF.
83
MESSAGE_WRITE 'E' 'R3' '021' 'BW_BTE_CALL_BW204010_E' '' '' ''.
84
ENDIF.
85
IF NOT L_T_MESSAGES IS INITIAL.
86
PERFORM WRITE_BTE_EXIT_MESSAGES TABLES L_T_MESSAGES
87
CHANGING P_SUBRC.
88
ENDIF.
89
ENDIF.
90
ENDIF.
91
92
Call Customer-Exit
93
DESCRIBE TABLE P_T_DATA LINES L_LINES.
94
MESSAGE S407 WITH 'EXIT_SAPLRSAP_001' 'CMOD' L_LINES.
95
CLEAR SY-SUBRC.
>>>>>
CALL CUSTOMER-FUNCTION '001'
97
EXPORTING
98
I_DATASOURCE = L_DATASOURCE
99
I_ISOURCE = L_12B_SOURCE
100
I_UPDMODE = P_UPDMODE
101
TABLES
102
I_T_SELECT = P_T_SELECT
103
I_T_FIELDS = P_T_FIELDS
104
C_T_DATA = P_T_DATA
105
C_T_MESSAGES = L_T_MESSAGES
106
EXCEPTIONS
107
RSAP_CUSTOMER_EXIT_ERROR = 1
108
OTHERS = 2.
109
DESCRIBE TABLE P_T_DATA LINES L_LINES.
110
MESSAGE S408 WITH L_LINES.
111
112
Handle Customer-Exit error messages
113
IF SY-SUBRC <> 0.
114
P_SUBRC = SY-SUBRC.
115
IF 1 = 2. MESSAGE E020 WITH ''. ENDIF.
Contents of system fields
Name
Val.
SY-SUBRC
0
SY-INDEX
1
SY-TABIX
1
SY-DBCNT
0
SY-FDPOS
0
SY-LSIND
0
SY-PAGNO
0
SY-LINNO
1
SY-COLNO
1
SY-PFKEY
SY-UCOMM
SY-TITLE
Report for the extractor call
SY-MSGTY
S
SY-MSGID
R3
SY-MSGNO
407
SY-MSGV1
EXIT_SAPLRSAP_001
SY-MSGV2
CMOD
SY-MSGV3
100
SY-MSGV4
Active Calls/Events
No. Ty. Program Include Line
Name
5 FUNCTION SAPLRSAP LRSAPF06 96
CALL_DATA_CUSTOMER_FUNCTION
4 FORM SAPLRSAP LRSAPF06 96
CALL_DATA_CUSTOMER_FUNCTION
3 FORM GP3PDR0GQDXJ0ZOA35DPGNCU80M GP3PDR0GQDXJ0ZOA35DPGNCU80M 274
PROCESS_DATA_PACKAGE
2 FORM GP3PDR0GQDXJ0ZOA35DPGNCU80M GP3PDR0GQDXJ0ZOA35DPGNCU80M 170
DATA_TRANSFER
1 EVENT RSFHGEN2 RSFHGEN2 59
START-OF-SELECTIONHello Raja,
I think some objects should still lying in the dev. server which are yet to be transported, also try to deactivate and reactivate the project for user exit for BW and transport it .
Also manually request can be created for transporting object "ZOXPRO0043" into quality environment and transport it .
Let us know the output for the same.
Hope that helps.
Regards
Kapadia
***Assigning points is the way to say thanks in SDN.*** -
Syntax error in program "SAPLRPAP"
The following syntax error occurred in the program SAPLRPAP :
"The type "4b>#þ" is unknown."
Error in ABAP application program.
The current ABAP program "SAPFHPIN" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
Due to this error, we can longer create an account using transaction code SU01, can anyone help me to figure out what made this program to have a syntax error and how can I resolve it. Thanks
Appreciate your assistance!Hi Jaypee,
Please send the message no.
Regards
Krishnendu -
Syntax error in program "SAPLMEGUI "
Hi Experts
I experienced the below run time error with tcodes me23n / me2n etc
The following syntax error occurred in program "SAPLMEGUI " in include
"OI_LMEGUICIOI_EXG " in
line 132:
"The data object "L_MEPOITEM" does not have a component called "OIEXGNU"
"M"."
Can you please suggest solution?
Warm regards
ramSivaI think the syntax error in a standard program can only be solved by SAP.
If it is caused by own coding in a user exit, then contact the ABAPer who did this.
the dump usually shows the user who last changed the coding -
Syntax error in program "HINCALC0 ".
Hi,
After applying the Snote -1474958 along with the Prerequisties (Snote -1455387,1425161,1452218,1456076,1459813,1459875,1475735), when we exec the TC PC00_M40_CALC we are getting the abap dump.
Runtime Errors SYNTAX_ERROR
Date and Time 23.08.2010 13:06:31
ShrtText
Syntax error in program "HINCALC0 ".
What happened?
Error in ABAP application program.
The current ABAP program "????????????????????????????????????????" had to be
terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
In program "HINCALC0 ", the following syntax error occurred
in the Include "PCSECIN0 " in line 155:
"Field "80CCF_DEDMT" is unknown. It is neither in one of the specified "
"tables nor defined by a "DATA" statement. "DATA" statement."
Author and last person to change the Include are:
Author "SAP "
Last changed by "BASIS_USER "
Error analysis
In program "HINCALC0 ", the following syntax error occurred:
"Field "80CCF_DEDMT" is unknown. It is neither in one of the specified "
"tables nor defined by a "DATA" statement. "DATA" statement."
Trigger Location of Runtime Error
Program ????????????????????????????????????????Hi Ramana,
While applying the snote we are getting error below
Yellow light for the status Object PCFDCIN0- Corrections incompletly copied:see change display.
Green Light for the Status Object PSDECIN0 - Changes Can be copied
Green Light for the Status Object PSDECIN1 - Changes Can be copied
Regards,
KARAN.
Maybe you are looking for
-
Since upgrading to Yosemite I have a problem with Font Book now being EXTREMELY slow in loading. Under Mavericks the collection list shows up almost immediately and the full font list comes up in about 10 seconds for about 15 seconds to load the 617
-
Acrobat update will not allow me to accept. Just quits.
Acrobat update will not allow me to accept terms. Just quits.
-
Problems with goods movements cancelling network confirmations
Hello experts, I'm having some problems with goods movement when cancelling network confirmations. I assign a component for a operation in the project builder (CJ20N). Then when I execute a confirmation for that operation in CN25 everything works cor
-
I have downloaded Firefox to my laptop, which crashed, and could not be restored by my backup software. All files reside on an external hard drive, including Firefox. I had not exported my favorites prior to the crash. How do I import those favorites
-
I am totally PSE8 illiterate. Is it possible to take, for example, a picture of my 4 year old grandaughter and put my younger granddaughter's face (from a different picture) into it?