System error on reading internal table DYNTAB, screen 7313

Hello,
I'm trying to create a customer master in batch mode. I get this error when saving. If I create the customer on-line, I'm able to create with no errors. When I create using a program, I get the error and have to exit.
Does anyone have a clue on what to do?
Thanks,
Theresa

Looks like its having a hard time doing something with the tabstrip on the screen. Does your XD01 screen look the same as it does during the BDC recording? If not, you may have to compensate. I don't really now exactly what your problem is, but I can make some guesses. During the recording, do you click on the tabs or do you switch tabs by using the tab selector on the right of the tabstrip?
Regards,
Rich Heilman

Similar Messages

System error on reading screen values

Hi ABAP'ers!!
When I try to unblock the vendor account in FK05 (unblock in all company codes) I get an error :
System error on reading screen values
Message no. F2 109
Would appreciate your suggestions/inputs!!
Thanks for your time!

Hi VR,
in FK05 you cannot unlock vendor.through functionality only u can unblock the vendor.
It display error message.
For these changes ( for blocking / unblocking ) user exit will be triggerd.
Regards,
Narasimha

System error: Unable to lock table/view V_T077K_M

Hi,
Not able to work on field selection (OMSG) i am getting an error "System error: Unable to lock table/view V_T077K_M" checked in SM 12 also, but dint get there anything.
please cud you help me in this regard,

contact your basis team, there might be an overflow of the lock table because of mass changes from other users (even for other tables)

Ho to read intern table in update rule?

Hello experts,
I have the following start routine:
PROGRAM UPDATE_ROUTINE.
$$ begin of global - insert your declaration only below this line -
TABLES: /BIC/AZD_ODS_C00.
DATA: ITEM_TABLE TYPE STANDARD TABLE OF /BIC/AZD_ODS_C00
      WITH HEADER LINE
      WITH NON-UNIQUE DEFAULT KEY INITIAL SIZE 0.
DATA: gv_flag type c.
$$ end of global - insert your declaration only before this line   -
$$ begin of routine - insert your code only below this line        -
fill the internal tables "MONITOR" and/or "MONITOR_RECNO",
to make monitor entries
SELECT * FROM /BIC/AZD_ODS_C00 INTO TABLE ITEM_TABLE.
SORT ITEM_TABLE BY /BIC/ZABOOKID ASCENDING.
       LOOP AT ITEM_TABLE.
        AT NEW /BIC/ZABOOKID.
        GV_FLAG = 'X'.
        ENDAT.
       ENDLOOP.
if abort is not equal zero, the update process will be canceled
ABORT = 0.
How can I read intern table ITEM_TABLE in a update rule?
And will gv_flag be still available in update rule?
thanx
hiza
Message was edited by:
        Hiza
Message was edited by:
        Hiza

Hi,
I am just giving you a sample code which I had used
just try to read this will help you
PROGRAM UPDATE_ROUTINE.
$$ begin of global - insert your declaration only below this line -
TABLES: ...
DATA:   ...
$$ end of global - insert your declaration only before this line   -
The follow definition is new in the BW3.x
TYPES:
BEGIN OF DATA_PACKAGE_STRUCTURE.
     INCLUDE STRUCTURE /BIC/CSZRINF001.
TYPES:
     RECNO   LIKE sy-tabix,
END OF DATA_PACKAGE_STRUCTURE.
DATA:
DATA_PACKAGE TYPE STANDARD TABLE OF DATA_PACKAGE_STRUCTURE
       WITH HEADER LINE
       WITH NON-UNIQUE DEFAULT KEY INITIAL SIZE 0.
FORM startup
TABLES   MONITOR STRUCTURE RSMONITOR "user defined monitoring
           MONITOR_RECNO STRUCTURE RSMONITORS " monitoring with record n
           DATA_PACKAGE STRUCTURE DATA_PACKAGE
USING    RECORD_ALL LIKE SY-TABIX
           SOURCE_SYSTEM LIKE RSUPDSIMULH-LOGSYS
CHANGING ABORT LIKE SY-SUBRC. "set ABORT <> 0 to cancel update
$$ begin of routine - insert your code only below this line        -
fill the internal tables "MONITOR" and/or "MONITOR_RECNO",
to make monitor entries
break-point.loop at DATA_PACKAGE.if DATA_PACKAGE-/BIC/ZREMPID GE 5.delete DATA_PACKAGE.endif.endloop.
if abort is not equal zero, the update process will be canceled
ABORT = 0.
$$ end of routine - insert your code only before this line         -
Regards
Rahul

BBP_MON_SC: System Error: SC not in Table GT_LIST_HEADER

Hello,
We are in SRM -Ext Classic.
When i go to BBP_MON_SC: and look for a SC - yes i can find it .
Once i am in...
If i click on any of the tabs: Display SC.Item overview, messsages etc.,
I get a error message...
System Error: SC not in Table GT_LIST_HEADER
Any suggestions please?
regards
Srini

Hello
Is it happening for all SCs? Did you checked the status of shooping cart in BBP_PD?
Regards
Kiran

Read internal table with key not equal to

Hi,
How can I read internal table with key not equal to some other field.
Basically in read statement we can read only fields equal to others fields.

Hi,
Test the following Code you can Use Loop at for this But not Read Table
DATA: BEGIN OF it_test OCCURS 10,
f1(4),
f2 TYPE i,
f3(2),
END OF it_test.
DATA: it_test2 LIKE STANDARD TABLE OF it_test WITH HEADER LINE.
it_test-f1 = '1000'.
it_test-f2 = 10.
it_test-f3 = 'B'.
APPEND it_test TO it_test.
it_test-f1 = '2000'.
it_test-f2 = 10.
it_test-f3 = 'A'.
APPEND it_test TO it_test.
it_test-f1 = '1000'.
it_test-f2 = 10.
it_test-f3 = 'B'.
APPEND it_test TO it_test.
it_test-f1 = '1000'.
it_test-f2 = 10.
it_test-f3 = 'A'.
APPEND it_test TO it_test.
it_test-f1 = '1000'.
it_test-f2 = 40.
it_test-f3 = 'A'.
APPEND it_test TO it_test.
LOOP AT it_test INTO it_test WHERE f3 NE 'A'.
WRITE: / it_test-f1, it_test-f2, it_test-f3.
ENDLOOP.
Kind Regards,
Faisal

DAC: "error while reading repository table". Please help!

Hi everybody,
I copied DAC directory from server to a workstation.
DAC client on server machine runs normally.
When trying to run DAC client on the workstation, I get an error message "Error while reading repository table".
I tried to find any DAC log file to get some additional information, but I couldn't.
The connection in DAC seems to be configured properly (test connection successful).
The only difference I found between server and workstation is that there are two Oracle homes installed on the workstation and one - on the server.
Thanks,
Alex

So you can read the tables now? Good to know.
Just as a hint: if you "tnsping" your data source from a command window, you'll see which path and file is used, so you can find out which home.
TNS Ping Utility for 32-bit Windows: Version 11.1.0.6.0 - Production on 04-MAR-2009 16:42:43
Copyright (c) 1997, 2007, Oracle. All rights reserved.
Used parameter files:
C:\Oracle\product\11.1.0\client_1\network\admin\sqlnet.ora <--- my 11g home is used and not the 9i or 10g which also reside on this machine.
@DAC client can't connect to server: i.e. the icon stays red?
- Is your server up and running? (I don't want to start a flame war, but it happens to the best of us)
- Did you go through the steps here? http://download.oracle.com/docs/cd/E12513_01/doc/bic.101/e12653/dac_configure.htm
Cheers,
C.

DAC: error while reading repository table

Hi everybody,
I installed DAC (copied from server to a workstation).
When trying to run DAC client on the workstation, I get an error message "Error while reading repository table"
The connection seems to be configured properly (test connection successful).
DAC client on server machine starts normally.
What can be a problem?
Thanks,
Alex

Hello again!
Has anybody seen this problem?
What can it be?
Where can I find DAC logs?
Cheers,
Alex

Read internal table from report.

Hi all.
I want to know is it possible to read internal table from report without modifying the report. is there any function module by which we can run the report and read data from internal table?
Thanks.

hi
hope it will help you.
<REMOVED BY MODERATOR>
Read table doesn't allow ne operator.
It reads only one record...Either by index or key.
READ TABLE MY_TAB INDEX 1.
READ TABLE MY_TAB WITH KEY CODE = 'ATG'.
these are the results for SY-SUBRC checks after read table
SY-SUBRC = 0:
An entry was read.
SY-TABIX is set to the index of the entry.
SY-SUBRC = 2:
An entry was read.
SY-TABIX is set to the index of the entry. This return code can only occur when you use the COMPARING addition. For further detauls, refer to the COMPARING section of the additions
SY-SUBRC = 4:
No entry was read.
The value of SY-TABIX depends on the table type and whether the BINARY SEARCH addition was specified.
If the table is a SORTED TABLE or a table sorted in ascending order of the type STANDARD TABLE with the BINARY SEARCH addition, SY-TABIX refers to the next-highest index.
Otherwise, SY-TABIX is undefined.
SY-SUBRC = 8:
No entry was read.
This return code only occurs with a SORTED TABLE or a STANDARD TABLE with the BINARY SEARCH addition. SY-TABIX is set to the number of all entries plus 1.
Reading records with keys
http://help.sap.com/saphelp_47x200/helpdata/en/fc/eb35f8358411d1829f0000e829fbfe/content.htm
Reading lines with Index
http://help.sap.com/saphelp_47x200/helpdata/en/fc/eb3730358411d1829f0000e829fbfe/content.htm
Edited by: Alvaro Tejada Galindo on Feb 19, 2008 5:43 PM

Reading internal tables

Hi all
i am using internal table itab1,
i want to add the similar contents of itab1 from itab2 into itab3
how to do it?
thanks
raghvendra bhanap

Hi,
This is a documentation regarding reading internal tables.
Hope this will be useful...
When the size of the record or the number of records in the internal table is large, doing a linear search is time consuming. It is always a good practice to search a record by binary search (Always Sort the table before doing a binary search). The difference is felt especially in the production environment where the live data is usually huge. As of release 4.0 there are new types of internal tables like SORTED and HASHED which can be effectively used to further reduce the search time and processing time.
e.g.     Do not use the following statement:-
Select matnr from mara
Into table i_mara
Where matnr in s_matnr.
     Select matnr werks from marc
          Into table i_marc
          For all entries in i_mara
          Where matnr eq i_mara-matnr.
     Loop at I_mara.
          Read table i_marc with key matnr = I_mara-matnr.
     Endloop.
Instead use the following statement:-
     Select matnr from mara
          Into table i_mara
          Where matnr in s_matnr.
                                   Select matnr werks from marc
                                        Into table i_marc
                                        For all entries in i_mara
                                       Where matnr eq i_mara-matnr.
                                   Sort I_marc by matnr.
                                   Loop at I_mara.
                                        Read table i_marc with key
matnr = I_mara-matnr
binary search.
                                   Endloop.
It is a good practice to search records from internal tables using a binary search. But extreme caution needs to be applied as it may either increase the time or may cause run time termination if it is not sorted.
Always the sort the internal table by the required keys before performing a binary search.
e.g.     Do not use the following statement:-
Select matnr from mara
Into table i_mara
Where matnr in s_matnr.
     Select matnr werks from marc
          Into table i_marc
          For all entries in i_mara
          Where matnr eq i_mara-matnr.
     Loop at I_mara.
          Read table i_marc with key matnr = I_mara-matnr binary search.
     Endloop.
Instead use the following statement:-
     Select matnr from mara
          Into table i_mara
          Where matnr in s_matnr.
                                   Select matnr werks from marc
                                        Into table i_marc
                                        For all entries in i_mara
                                       Where matnr eq i_mara-matnr.
                                   Sort I_marc by matnr.
                                   Loop at I_mara.
                                        Read table i_marc with key
matnr = I_mara-matnr
binary search.
                                   Endloop.
It is a general practice to use           Read table <itab>     This statement populates all the values of the structure in the workarea.
The effect is many fold:-
     It increases the time to retrieve data from internal table
     There is large amount of unused data in work area
     It increases the processing time from work area later
It is always a good practice to retrieve only the required fields. Always use the syntax      Read table <itab> transporting f1 f2 FN           If just a check is being performed for existence of a record use      Read table <itab> transporting no fields
e.g.     Do not use the following statement:-
data: i_vbak like vbak occurs 0 with header line.
data: i_vbap like vbap occurs 0 with header line.
Loop at i_vbak.
     read table i_vbap with key
vbeln = i_vbak-vbeln binary search.
     If sy-subrc = 0 and i_vbap-posnr = 00010.
     endif.
Endloop.
Instead use the following statement:-
data: i_vbak like vbak occurs 0 with header line.
data: i_vbap like vbap occurs 0 with header line.
Loop at i_vbak.
                              read table i_vbap transporting posnr with key
vbeln = i_vbak-vbeln binary search.
                              If sy-subrc = 0 and i_vbap-posnr = 00010.
                              endif.
Endloop.
There are many ways in which a select statement can be optimized. Effective use of primary and secondary indexes is one of them. Very little attention is paid especially to the secondary indexes. The following points should be noted before writing a select statement:-
     Always use the fields in the where clause in the same order as the keys in the database table
     Define the secondary indexes in the database for the fields which are most frequently used in the programs
     Always try to use the best possible secondary index in the where clause if it exists
     Do not have many secondary indexes defined for a table
     Use as many keys both primary and secondary as possible to optimize data retrieval
As of release 4.5 it is now possible to define the secondary index in the where clause using %_HINT.
e.g.     Do not use the following statement:-
     Assuming a secondary index is defined on the field vkorg in table vbak
     Select vbeln vkorg from vbak
          Into table i_vbak
          Where vbeln in s_vbeln.
     Loop at i_vbak.
          Case i_vbak-vkorg.
          When IJI1.
          When IJI2.
          Endcase.
     Endloop.
Instead use the following statement:-
                                   Select vbeln vkorg from vbak
                                        Into table i_vbak
                                        Where vbeln in s_vbeln and
                                             Vkorg in (IJI1,IJI2).
                                   Loop at i_vbak.
                                        Case i_vbak-vkorg.
                                        When IJI1.
                                        When IJI2.
                                        Endcase.
                                   Endloop.

SELECT-OPTIONS can u use it to read internal table ?????

Hello All,
   I am trying to read an internal table with the select-options statement. I am getting a syntax error so i am hoping i am just coding it incorrectly. Can someone tell me what is wrong here is the if statement :
if p_begdte in t_rpt-datab and
       p_enddte in t_rpt-datbi.
    else.
       exit.
    endif.
thanks scott

This is not working?
tables: a916.
* Beg valid date *
data text021(29).
selection-screen begin of line.
selection-screen comment 1(30) text-021 for field p_begdte.
selection-screen position 32.
select-options: p_begdte for a916-datab default '20041101' to
'99991231'.
selection-screen end of line.
* End valid date *
data text022(29).
selection-screen begin of line.
selection-screen comment 1(30) text-022 for field p_enddte.
selection-screen position 32.
select-options: p_enddte for a916-datbi default '20041101' to
'99991231'.
selection-screen end of line.
start-of-selection.
<b>Loop at t_rpt.
if t_rpt-datab in p_begdte
and t_rpt-datbi in p_endte.
* do something
else.
exit.
endif
Endloop.</b>
Regards,
Rich Heilman

System error -no entry in table T093 for the chart of depreciation or ccode

When checking Depreciation Areas of Company Codes in overview for experts (transaction SPRO) I first get a warning message inconsistent rounding entries were corrected.
After saving once in the maintenance transaction (as recommended in the help text) I get the following system error: there is no entry in table T093 for the chart of depreciation or company code. I checked table T093 and all entries are in there!
What else I have to correct?
Regards
Cordula Speh

hi ,
yours is customizing problem only, check all steps once again in customizing. T093 is initial customizing for asset accounting. just go through below things and check based on this order all customizing.
1.     Copy Reference Chart of Accounts Depreciation / Depreciation Areas.
2.     Specify Description of Chart of Depreciation (COD).
3.     Copy / Delete Depreciation Areas.
4.     Creation of 0 Tax Codes for Non-Taxable Transaction.
5.     Assign Tax Codes for Non-Taxable Transactions.
6.     Assign COD to Company Code.
7.     Specify Account Determination.
8.     Create Screen Layout Rules.
9.     Define Number Intervals.
check one by one and if you find anything missedout do it, i think max you prblm solve, if not give some more details about your problem.
thanks and regards
vk.

Error while extending internal table

Hi,
We have a data load going on from one ODS to another, this is a daily load but for but last few days data load is failing saying
"Runtime Error: TSV_TNEW_PAGE_ALLOC_FAILED - You attempted to extend an internal table, but the required space was not available. "
What all measures can be taken to make this load happen regularly?
Regards,
Kironmoy Banerjee.

Hi ,
Please check below threads.
http://forumsa.sdn.sap.com/click.jspa?searchID=32822064&messageID=4660903
http://forumsa.sdn.sap.com/click.jspa?searchID=32822064&messageID=6806983
http://forumsa.sdn.sap.com/click.jspa?searchID=32822064&messageID=6794034
http://forumsa.sdn.sap.com/click.jspa?searchID=32822064&messageID=5618979
http://forumsa.sdn.sap.com/click.jspa?searchID=32822064&messageID=8059962
http://forumsa.sdn.sap.com/click.jspa?searchID=32822064&messageID=6678629
http://forumsa.sdn.sap.com/click.jspa?searchID=32822064&messageID=5989583
Hope it helps.
Thanks & Regards,
Ramnaresh.P.

Runtime error in Dynamic internal table with AMOUNT and Quantity Fields..

Dear friends,
I am attempting write a dymanic Select Statement (with joins).
And the sleect query looks like this..
SELECT (LT_SEL_LIST)
INTO CORRESPONDING FIELDS OF
TABLE <DYN_TABLE>
FROM (LT_FROM_LIST)
WHERE (LT_WHERE3).
Here the into table is a dynamically created internal table..
which is created by ...this
CALL METHOD CL_ALV_TABLE_CREATE=>CREATE_DYNAMIC_TABLE
    EXPORTING
      IT_FIELDCATALOG = IT_OUTPUT2[]
    IMPORTING
      EP_TABLE        = DY_TABLE.
the it_output2 contains the the fieldcatlog information of dynamically given fields :-
like:-
       TABNAME
       FIELDNAME
       DATATYPE
       LENG
       INTTYPE
       ROLLNAME
       DECIMALS
       REFTABLE
       REFFIELD
i mean the internal table is constructed with reference to all the bove metadata.
Problem:- This query run fine with all the fields Except AMOUNT AND QUANTITY fields....
When the selection list contain VBAK-NETWR or MSEG-MENGE..It throws a runtime error.
"The data read during a SLECT access couldnt be inserted into the target field,either conversion is not supported for
the target field's type or the target field is too short."
after this I even tried to construct the dynamic table with CFILEDNAME and QFIELDNAME in the Fieldcatalog.
so now my fieldcatlog looks like this:---
LOOP AT IT_DD03L..
IF IT_DD03L-DATATYPE = 'CURR'.
       TABLEFIELD-CFIELDNAME = IT_DD03L-FIELDNAME .
       ENDIF.
   IF IT_FIELDCAT3-DATATYPE = 'QUAN'.
       TABLEFIELD-QFIELDNAME = IT_DD03L-FIELDNAME .
ENDIF.
       TABLEFIELD-TABNAME     = IT_DD03L-TABNAME.
       TABLEFIELD-FIELDNAME   = IT_DD03L-FIELDNAME.
       TABLEFIELD-DATATYPE    = IT_DD03L-DATATYPE.
       TABLEFIELD-INTLEN      = IT_DD03L-LENG.
       TABLEFIELD-INTTYPE     = IT_DD03L-INTTYPE .
       TABLEFIELD-ROLLNAME    = IT_DD03L-ROLLNAME.
       TABLEFIELD-DECIMALS    = IT_DD03L-DECIMALS.
       TABLEFIELD-REF_TABLE   = IT_DD03L-REFTABLE.
       TABLEFIELD-REF_FIELD   = IT_DD03L-REFFIELD.
APPEND TABLEFIELD.
CLEAR TABLEFIELD.
ENDLOOP.
Note:- this is a test code so ignore performance issues...
Please help me with some code ...to avoid the Runtime erorr.
Thanks,
jeevan.

Hi Jeevan,
Why are moving only few fields from DD03L table to your field catalog? Why don't you use move-corresponding? The following code works for me in ECC6.0.
data: it_dd03l type table of dd03l initial size 0,
      ls_dd03l type dd03l,
      lt_fldcat TYPE lvc_t_fcat,
      ls_fldcat TYPE lvc_s_fcat,
      ls_where(72) TYPE c,
      lt_where LIKE TABLE OF ls_where,
      lt_fld LIKE TABLE OF ls_where,
      lt_data_dy TYPE REF TO data.
field-symbols: <ft_data> TYPE STANDARD TABLE.
select * into table it_dd03l from dd03l
    where tabname = 'VBAK'
      and ( fieldname = 'VBELN' or fieldname = 'NETWR' ).
check sy-subrc eq 0.
loop at it_dd03l into ls_dd03l.
move-corresponding ls_dd03l to ls_fldcat.
append ls_fldcat to lt_fldcat.
move ls_dd03l-fieldname to ls_where.
append ls_where to lt_fld.
if ls_dd03l-fieldname = 'VBELN'.
    clear ls_where.
    concatenate ls_dd03l-fieldname ' <> ''''' into ls_where.
    append ls_where to lt_where.
endif.
endloop.
check not lt_fldcat is initial.
CALL METHOD cl_alv_table_create=>create_dynamic_table
      EXPORTING
        it_fieldcatalog           = lt_fldcat
      IMPORTING
        ep_table                  = lt_data_dy
      EXCEPTIONS
        generate_subpool_dir_full = 1
        OTHERS                    = 2.
    IF sy-subrc <> 0.
      RAISE no_configuration_data.
    ENDIF.
    ASSIGN lt_data_dy->* TO <ft_data>.
check sy-subrc eq 0.
select (lt_fld) from VBAK into corresponding fields of table
    <ft_data>
    where (lt_where).
Thanks
Bala

Error Passing an internal table between BSP pages

Any time there is data in the internal table and I try to pass it from one BSP page to the next I get an Web error. I've heard that it is possible to pass an internal table from one page to the next. can anyone point me in the right direction here?

You can do this with the navigation object only if the table is very small. Overwise it overflows 2+KB limitation of URLs.
Alternative ideas is to use server side cookies (search forum for many examples).
If stateful, just hang stuff of your application class.

System error on reading internal table DYNTAB, screen 7313

Similar Messages

Maybe you are looking for