System is accepting deletion batch in PO

Hi All
Suppose i put deletion indiactor for a batch.
Now i am creating a purchase order and if i entered batch which is having deletion indicator.
system is accepting and not even warning message.
system should not take deleted batches in PO.
Can any one explain me to ressolve this issue.
Thanks n Regards
MSK

this is just standard design. Putting a deletion indicator is a human decision. putting a batch into a PO is as well a human decision, which may make the decision for the deletion obsolete, and you have to erase the deletion flag.
The deletion flag is only an indicator for archiving. But archiving program checks whether the batch can be archivied or still has inventory. if the deleted batch still has inventory, then it will not archive the batch. But the deletion indicator is not meant to restrict anything.
when you enter the deletion indicator, then SAP does NOT check whether this batch is contained in an active purchase order either.

Similar Messages

  • How to delete batch input session still in process since year 2000

    Hi All,
    in our productive system we have still batch input session in process from year 2000, and I would like to delete them, but how to do this, because the error message is "Unable to schedule session .....".
    Thanks for your help

    Hi Olivier  ,
    Such error occurs when you are trying to run session in foreground and some error occurs with connection.
    As such these session are not harmful in any way. You can request basis person to remove those sessions.
    Regards,
    Mohaiyuddin

  • SM35, when deleting batches, prevent log from being deleted

    Hello all,
    When manually deleting batches within transaction SM35, we want to prevent the log from also been deleted.  When the pop-up appears asking whether the log should be deleted, we want only No or Cancel to be valid choices. 
    We do some reporting on tables APQL and APQI and we want to ensure that the log information remains in these two tables.
    Does anyone have any recommendations on how to achieve this?
    Thanks
    Bruce

    I created a simple report that deleted the batch session, but left the system log for that session.  This is a program documentation.
    Program Title:    Delete locked BDC sessions in error, keep logs.
    Description:
                      Delete locked BDC sessions in error from table APQI.
                      Selection screen fields will determine which
                      sessions will be deleted.
                      Session logs of deleted sessions will remain in the
                      log table, APQL.

  • Deleted Batch in Production order

    Dear SAPeers,
    I am trying to use a batch that has been deleted both at plant level as well as storage location level in the production order.
    At the time of using a deleted batch a warning message pops up stating the batch is deleted but it still allows us to create and release the production order. I have made this warning message into an error message. But the error message does not reflect at the time of creation of production order it comes at the time of goods issue to production order.
    But the components that have been assigned deleted batches also have backfluch indicator. So we need not issue these components using the goods issue transaction MB1A. While doing operation confirmation itself the components are picked up. They also come with the deleted batch. But they allow posting without giving any error or warning.
    My question is how do we prevent deleted batches to be accepted at the time of production order creation. Secondly even if it allows at the time of creation of production order how do we stop it at the time of confirmation.
    Thanks and Regards
    Srinivasan R

    Dear Please check below links these may be helpful for you.
    [ Goods Movements in the Confirmation Transaction|http://help.sap.com/saphelp_di471/helpdata/en/84/589b3e1f1e7c7de10000000a114084/content.htm]
    [Original Batches in Production|http://help.sap.com/saphelp_470/helpdata/en/0a/22863c983abf12e10000000a114084/content.htm]
    Cheers
    KK

  • Tracking Deleted Batch Input Map from SM35

    Dear All,
    I want to find the details of deleted Batch Input Maps from SM35. e.g. if some one deletes a Batch Input Map from SM35 transaction then I need to find the details of the user along with date and time.
    I tried finding the table but I could not. Please let me know if this is possible some way.
    Regards,
    lalit

    AFAIK this information is not stored in SAP database
    (Check FM BDC_OBJECT_DELETE and include LSBDCF01 form DELETE_SESSION of FG SBDC)
    You may ask system to store it in DBTABLOG "Log Records of Table Changes"
    - (SE11) Activate the general logging for the table - the technical setting of
    the table needs to be adjusted to "Log data changes". To check whether
    it is activated for a table, use transaction AUT01.
    - (RZ10/RZ11) You may also be required to set the profile parameter rec/client on.
    Regards,
    Raymond

  • How to create a error message for Deleted batch while creating a PO

    Hi ,
    Can any body tell me how to create error message for a deleted batch while creating a PO in ME21n,
    when a PO is created for a deleted batch at GI &GR lebel it is showing  a error message,
    but i want to show a error message while doing the PO creation.
    Thanks,
    Sachhi

    in badi  me_process_po_cust u can  put this message
    METHOD if_ex_me_process_po_cust~check.

  • BAPI to delete Batch number

    Hi,
    Can anyone let me know the BAPI to delete the Batch Number when ever a particular Material document is reversed for a year.
    (Batch Number that was created as part of Material Document Creation and Each Batch Number is used only for one Material Document number)
    Points for sure..
    Thanks,
    Ponraj.s.

    Ponraj,
    BAPI_BATCH_CHANGE              Change Batch   
    BAPI_BATCH_CREATE              Create Batch   
    BAPI_BATCH_DELETE              delete batch
    Amit.

  • How do I reorganize my photos on iPad 2?  I need to move (not copy) photos from one album to another.  When I use the copy function to another album, and then try to delete an image from the original album, the system wants to delete the photos from all a

    How do I reorganize my photos on iPad 2?  I need to move (not copy) photos from one album to another.  When I use the copy function to another album, and then try to delete an image from the original album, the system wants to delete the photos from all albums.  Please help.

    You can't do it directly on the iPad - the new album functionality basically only allows you to copy photos into those new albums, you can't move them. The way that I think of it as working is that you are just creating pointers to the photos in those new albums, so if you then delete the original photo on the iPad you therefore automatically delete all the pointers to it.
    If you want to re-organise your albums then you will need to do it on your computer and then sync those albums over to the iPad

  • When I select text, system wide, and delete it, why is the succeeding text then selected?

    When I select text, system wide, and delete it, why is the succeeding text then selected?
    This doesn't happen all the time, but it's happened enough for me to notice it and get super annoyed by it.
    Here's an example. If I have the following text:
    The quick brown fox jumps over the lazy dog.
    And I highlight quick brown and then press delete, I get: (The red shows the selected text)
    The fox jumps over the lazy dog.
    So when I then start typing, more text is removed than I want. Sometimes this effect carries over, so that the next couple words are selected once I start typing.
    It's wonderfully annoying. So I was wondering if anyone else was experiencing such issues or if anyone might have an idea on how to get rid of this problem.
    Thanks.

    Ooops. I haven't updated my sig in a while. I'm on 10.8.2 and it happens on a late 2008 Alu Macbook.

  • How i check the :SYSTEM.FORM_STATUS is DELETE OR REMOVE

    hi master
    SIR how i check my :SYSTEM.FORM_STATUS is DELETE OR REMOVE
    please gide me idea
    thanking you
    aamir

    hello,
    As the online documentation says, :SYSTEM.FORM_STATUS can take 3 different values:
    CHANGED
    NEW
    QUERY
    There is no status for a record that has just been removed. Only the PRE-DELETE, ON-DELETE and POST_DELETE triggers fire on this record.
    Francois

  • Systems Preference is deleting an account in my Users

    My Users & Groups, in Systems Preference, is "deleting an account" in order to clean this device back to its factory default settings, and its been going on for about 20 hours. How long does it take?  Thanks!

    Hi Ralph,
    If you're looking to have that second Adobe ID you created completely erased, you'll want to email your request to our Privacy team.  They can explain the risks of doing so. 
    If you'd like those two accounts merged under a single Adobe ID, our customer service department can help with that: http://helpx.adobe.com/contact.html
    Please let me know if there's anything else we can help with!
    -David

  • Hi folks, you might know how to fix this: my wifi shows (no hardware installed) then I went to system preferences and deleted the wifi connection, I went also to system information and I can not see wifi listed on Network, how can I create a new wifi ?

    Hi folks, you might know how to fix this: my wifi shows (no hardware installed) then I went to system preferences and deleted the wifi connection, I went also to system information and I can not see wifi listed on Network, how can I create a new wifi or simply solve this, I have tryied shotdown pressing keys like P and R, option, etc. Please help me .

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Some how I have deleted the system Preferences application. I had already deleted everything from the trash bend before I realized system pref. was deleted. How can I recover or get it downloaded?

    Somehow I have deleted the system Preferences application. I had already deleted everything from the trash bend before I realized system pref. was deleted. How can I recover or get it downloaded? Everything has been transferred to my new mac pro, but would like to give this old mac to son-in-law.  Can I download system preferences back into this old mac? 
    Sidney Jean Bienvenu

    How Restore Deleted or Missing OS X Components
    A few of the basic OS X installed applications can be restored from the Optional Installs installer located in the Optional installs folder on your Installer DVD.  However, if what you need is not there then follow the instructions below.
    How to Use Pacifist to Restore Deleted or Missing OS X Components
    Insert the OS X Installer DVD into the optical drive.  Use a simple utility like TinkerTool to toggle invisibility so you can see invisible items.  Alternatively, open the Terminal application in your Utilities folder and at the prompt enter the following:
    defaults write com.apple.finder AppleShowAllFiles Yes
    Press RETURN.
    To turn off the display of invisible files repeat the above command substituting No for Yes.
    The install packages are located in the /System/Installation/ folder on the DVD.
    Download the shareware utility Pacifist. Use it to extract a fresh copy of the missing item(s) from the file archives on your OS X installation DVD. The file archives are in the /System/Installations/ folder (use Go to Folder option in the Go menu of the Finder.)
    Here are Four Basic ways to use Pacifist (courtesy of George Orville.)
    Drag a .pkg icon onto the Pacifist window .....proceed to step 7.
    Click on “Open Package ....” and navigate to package desired and click “Open” in the open/save window.....proceed to step 7.
    Insert Mac OS X installer CD and when it mounts, navigate to .... Menu->Go->Go to Folder. In the path field enter or paste ....
    /Volumes/disc name/System/Installation/Packages (where disc name is the name of the CD/DVD that you inserted.)
    Click on the  "Go" button ..... • Drag a .pkg to Pacifist..... proceed to step 7.
    The package you'll need will have to be discovered by trial and error, but for most applications you should start with the Essentials.pkg and/or Additional Essentials.pkg.
    D. Insert your Mac OS X install disk 1 .... and open Pacifist.
    1.          In Pacifist, select "Open Mac OS X Install Packages" ... dialog may appear asking for disk 2, then disk 3 and finally disk 1 again.... {if DVD is not used)...If “Stop Loading” is selected...the procedure will stop!!!
    2a. When loading is complete, a new window appears, click the triangle to display contents of each package...Select item and proceed to step 7.
    2b.          or click the “Find” icon in the Pacifist window and type the name of the software you need.
    3.          In the list that comes back, click the top most entry for the item that you want. ..... that is the one for the English language.
    4.          On the top of the Pacifist window, click “verify” .... you will probably be prompted for your password.
    5.          Enter checks for.... “verify permissions” and “verify file contents.” and click “verify” ....enter password when prompted.... you will get back output which may look like this:
              20 files were scanned. 20 of 20 files were present on the hard disk. 0 of 20 files had file permissions that did not match those specified in the package. 0 of 20 files had checksums that did not match those specified in the package.
    6.          Click “close”. Go to step 7.
    Extract or Install........
    7.          In the Toolbar (upper left), you now have the option to extract or install. Click a file in the lower list and those two icons will be enabled.
    8.          If “Extract to...” is selected.... navigate to the location where the file will be placed, select “choose”, select “extract” in new dialog that appears,authenicate , if prompted, click “OK”.
    9.          In the next dialog, click “Extract”.
    10.          If “Install” is selected... dialog will appear with the location/path of the installed software. Click “Install”
    11.          Type in your password, click “OK”
    Pacifist will begin to extract files.
    12.          In steps 8/10ß.... you also have the choice to “cancel”
    Notes:          Pacifist may find that a file it is installing already exists on the hard disk. Pacifist will present you with an alert panel....
    Stop
    Leave original alone
    Update .....
    Default selection
    Replace .... (Replace option should only be used on full install packages)

  • Delete Batch in Material Master

    Dear Gurus,
    Please help me while i removed the Batch managment check mark in views (Sales: General Data & Plant data) of material master system show error [Batch management requirement cannot be changed; choose
    Message no. M3530]
    i already put the mark of deletion with (MSC2N) in all batches against this material.
    Waiting your fast response.
    Regards
    Aamir

    Hi,
    1:  Check the Status of Article in MMBE for total batches of the article.
    2:  There should not be any open Purchase Order Use SE16 & Table EKPO Give the Article 
         Number for which we have to find the Open Pos; Alternatively ME2M can also be used
    3:  There should not be any Sales Order. Use SE16 & Table VBAP Give the Article Number for
         Which we have to find the Open Sales Orders
    4:  There should not be any Purchase Requisition. Use SE16 & Table EBAN Give the Article
         Number for which we have to find the Open PRs
    5:  There should be no Stock in Transit MB5T
    6:  There should be no Plant availability Stock MB53
    7:  There should be no Reservation MB25
    8:  Previous Period Stock should be zero. Use MM03 with Plant Stock & Storage Loc. View.
         If Stock Exists follow the Procedure:
    u2022     If previous period stocks exist, we can make a withdrawal posting as follows. Post the same amount to current period stock (for example, using movement type 561) so that previous period stock and current period stock are identical.
    u2022     Make a withdrawal posting in the previous period for the stock together with posting date (for example, using movement type 562).
    9:  Stock requirement should be zero MD04
    10: There should be no open Delivery Use SE16 & Table LIPS
    11: There should be no open Warehouse Transfer Request Use SE16 & Table LTBP or LTAP
    12: The Batch Corresponding to the plant for the article has to be set for deletion indicator
          Tcode: MSC2N
    13: Once the batch deletion indicator is set, Archive all batches for the article.
    If any of the above Stock Exists it has to be closed; If Any of the stock exists we cannot uncheck the batch management indicator.
    After closing all the open items; the related business documents viz Purchase Orders, Delivery, etc have to be archived.
    Regards
    AM

  • Automatic deletion batch valuation type from PO after cancellation GR

    Hi, colleagues
    I need your guidance.
    The problem is:
    We have batch management with different valuation types.(valuation type is connected to batch) In mm03 valuation category is "X".
    Process:We make standart Purchase order, then MIGO where we put batch(with automatic valuation type for this batch) then we make cancellation of GR and try to make GR with another batch and valuation type. System gives mistake: m7043.
    As I understand, when we made GR firstly, system have written this  valuation type into PO and the following GR for this PO can be only with this valuation type.
    Have you any ideas how to make automatic! deletion of valuation type from PO after cancellation? Fields batch and valuation type in PO are hidden and users must not change it in PO.
    Mabe there are some notes or you can provide some other ideas?
    Thanks in advance
    Regards

    Pavlo Sydorenko wrote:
    As I understand, when we made GR firstly, system have written this  valuation type into PO and the following GR for this PO can be only with this valuation type.
    No. In standard, if you will do GR for batch number XXX, then system will not update the same batch number in PO (neither batch field nor valuation type field).
    At the time of making PO leave the batch and valuation type field as blank.
    Then check. I've checked the scenario. System is allowing to do GR with other batch number.

Maybe you are looking for