System not copies capacity category,splits while confirmation in CO11n

Dear All,
While confirmation with capacity category and splits,by default system not copies the capacity category and splits maintained in the production order.
Thanks,
Satyajit

HI
Goto OPK0 and your confirmation profile and then under the default tab and default select the propose for quants and services
or go to OPK4 and select your order type and under operation individual entry select the propose services and quants .
Check and revert
Regards
Anupam Sharma

Similar Messages

By product not getting posted to stock while confirming the order

Hi PP gurus,
I am facing a problem. The scenario is : My client is running foundry for manufacturing castings. In case a) He gets pattern as a free issue material from the customer for manufacturing casting. In this case he charges only the rework charges from . In this what need to be done: My doubts are:
1) What type of material should the pattern be made( free issue material or HALB) because for free issue material i cannot make a routing.
2) How the above process of charging only the service fro customer be carried out.
3) If i make the BOM of casting as Pattern as one line item & Used pattern as a by product whose value is negative. When i confirm the production order for casting only casting comes to stock , the by product doesnt come to stock.
What should i do.
I really need help for these queries. Whoever answers i will give him 10 points.I am at client site i need a quick solution to it.
Regards
Ashish Khurana

Hi Ashish,
When you confirm the prod order for the fert, the fert material will be posted the unrestricted use stock & to move the byproduct ie p003, you have to use the 531 movement.
use migo, GR , enter the reservation no. (you can get the reservation no. form the prod order of the FERT). & then 531 mvnt,
After this byproduct will be posted.
Also ensure that "clear open reservations" indicator is not selected when you do confirmation of the prod order.
Regards,
SDs

System not checking the source list while creating Scheduling Aggrement

Dear Gurus,
when i create a PO for a material(XYZ) which is not having a vendor(100) in the source list the system throws me a error message sayin that the vendor(100) is not maintained i the Source list.
but the same is not happenin when i create a Scheduling aggrement.
Can you please advice me which setting i am missin here?
Thanks...
Kumar

Hi,
Are you trying to create the Scheduimg agreement for the same plant as that of the Purchase order?
As "Source list mandatoty" check box is in the plant specific view of Material master,it is possible that it is not ticked in case both the plants are different.
Please check & advise.
Thanks & regards,
Kaveri

System not stopping when shutting down while lid is closed.

Hi everyone.
I have a problem. When I try to shutdown my system, and immedeately after that I close my lid, the system don`t want to stop. It just keeps on working with the backlight on, but it is not responding, and the screen stays black. After that I have to stop/reboot the system using my power button. I can`t find anything in my logs. Can you, guys, point me where the problem could be?
My machine is Dell Studio 1555 with Ati Radeon video card. If you need any information, I will post it.
Regards.
P.S. I seem to have that problem only when I am running X Window System, with and without Compiz.
Last edited by Gruntz (2010-12-23 10:07:14)

Your MBA is going into deep sleep. When you restart, the MBA is loading the sleep image and not doing a complete reboot. When you MBA wakes up, how much battery charge do you have remaining.
Deep sleep is enabled if your battery is draining or near empty.
SmartSleep allows you to set the threshold of battery charge remaining, let's say 20%, when your MacBook will write the contents of memory to disk.

Capacity Requirement in each capacity category

Hi experts,
I have some queries about capacity category in project as follow scenario:
1. I have a work center NLE0001 including 2 capacity category that are PERSON and MACHINE.
2. Then I assign this work center to a internal activity in PS. In detail, I enter work in this activity about 200 HR. So when I execute report of project structure (CN41N), the report represent that each capacity category in work center is 200 HR. It means total work of this activity is 400 HR. Please refer to report as follow:
- Project Definition
---WBS
Internal Activity (Work: 200HR)
Person Capacity (Work: 200HR)
Machine Capacity (Work: 200HR).
My question is that could you clarify why system calculate the capacity category like that??
Thank you!!!

Can anybody help me this problem???

Overdelivery % ignores while confirmation with capacity category and splits

Dear all,
System ignores Over-delivery % while confirmation with capacity category and splits only.
Note:
1.Error message set for overdelivery in OPK4.
2.Check box for Unlimited Overdelivery in material master(Work Scheduling View) as well as in the production order is OFF.
Thanks,
Satyajit

Hi,
Set in OPK4=>
1)Overdelivery = Error when overdelivery tollerance is exceed.
Set in material MM02= in Work scheduling
1)Maintian Underdelivery Limit and Overdelivery Limit
2)Remove Tick of Indicator: Unlimited (Indicator: Unlimited Overdelivery Allowed)
Overdelivery tolerance limit=> Percent by which the quantity that is posted to goods receipt may exceed the production order quantity.
Indicator: Unlimited Overdelivery Allowed=> Indicator that specifies whether the quantity actually delivered may infinitely exceed the required production order quantity.
With Regards,
Ashish

While updating my iphone, I am receiving a notice that itunes is not available. Is system not avaialbe and should I just try later?

while updating my iphone, i recevied a message that iTunes was not availabel and to try later. Is the system not available or is there something wrong with my computer

Hey csumner1,
Thanks for the question. I understand you are receiving a "Not enough free space" alert when attempting to sync your new iPhone 4s. The following article may help to resolve your issue:
iOS: "Not enough free space" alert when trying to sync
http://support.apple.com/kb/TS1503
Resolution
Try disconnecting and reconnecting your device, then syncing again to solve this issue.
Orphaned files may remain on your iOS device if it is physically disconnected while syncing music, podcasts, videos, or photos. This can prevent iTunes from syncing the iOS device on subsequent sync sessions. When this happens, the Capacity indicator in iTunes may report a large amount of "Other" disk usage for the iOS device. To resolve this issue:
1. Turn off the music or photo sync option in iTunes for the device.
2. Click Apply to sync the changes to the device.
3. Turn the music and photo sync options for the device on again.
4. Click Apply again to try to sync the device to iTunes.
          - If the 'Not enough free space' alert appears, continue to step 5.
5. Turn off the automatic syncing functions for the iOS device. To do this:
          - Select the iOS device from the iTunes window and click the Summary tab.
          - Deselect "Automatically sync when this device is connected" and select the "Sync only checked songs and videos" checkbox.
          - Click Apply to sync the changes to the device.
          - Reduce the amount of data that is being synced to the device and resync the device. For example, if syncing your Music library exceeds the memory capacity of the device, choose "Selected playlists" to transfer rather than "All songs and playlists" under the Music tab in iTunes.
If the 'Not enough free space' alert appears, continue to step 6.
6. Restore using iTunes.
Thanks,
Matt M.

CO11N-While Goods Movement System Not Allows Column/Field COST CENTER

Dear Friends,
While doing confirmation of PP/PM Order and doing goods movement the system not allows the Column/Field of COST CENTER.
Thanks and Regards,
Satyajit
PP/PM

Dear Thyagarajan,
1.I think the Planner Gruop will be at order level.
2.If I assigned the different Valuation Categories then I need to assign no.of G/L accounts.
Plz look for my senerio->I have a single Mnt.Order in which different operations carried out from different departments like civil,electrical,mechanical.Its like one project in PS.Now I assiged different Workkcenter/Cost Centers to respective operations.Now after confirmation,when I look the Cosing Report system shows the activity Cost departmentwise as its linked to workcenter/cost center,but material cost how it will get posted different departments?
Manually by 261->Order+Costcenter...I can post it but there is problem in Auto Goods Movement
Plz correct if wrong.
Thanks and Regards,
Satyajit

Executive Information system not activated in COPA

Hi gurus
Gone live in feb 08.
Not activated information system in COPA.
If they activate now in AUG 08. whether standard SAP CO Reports will pick up data from FEB 08 .
Thanks and Regards

Hi,
For me, it looks that you have gone live with COPA sans COPA Reports. If it is so, all data might have gone to COPA from Feb 08 onwards. Check the records in the table CE1XXXX where XXXX stands for your operating concern thru SE11/SE16.
Hope this helps,
Cheers

IW32 - Capacity category does not exist or cannot be selected

We are getting the bellow error upon exiting IW32, could you please tell us how to resolve
Capacity category does not exist or cannot be selected
Message no. CY374

Hello Ehsan,
This message also appeared for the first time after we applied EHP5, a note has been released regarding (Message CY374)see SAP note 1547467 for resolution and implement note 1504266 .
regards
Spencer

HT202157 My Apple TV stopped preparing update about 1/4 of the way into the update. The system says do not unplug your Apple TV while updating. I have waited 24 hours... No change. What do I do?

My Apple TV stopped preparing update about 1/4 of the way into the update. The system says do not unplug your Apple TV while updating. I have waited 24 hours... No change. What do I do?

You can't do much else besides pull the plug. If it causes further problems you should be able to restore as below:
Get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore.
On the other hand you may be able to simply start the update again. If however the update continues to fail, you should try the restore routine above.

Split of activities and quantity while confirming production order

hi gurus,
Our scenario is that suppose if we have to confirm 10 nos of a finished product.
and 10 operations are there.
here we have to confirm each no. for each operation. and quality checks are there for these operations .
now the quality people has to confirm the quantities and production people has to confirm the timings of activities(like set up , machine and labour ) .
i will be thank ful to you if some one helps me regarding this
thanks in advance
Kalyan

Hi Kalyan,
Do as below:
In OPK4, do the following for your order type--
1) On the second tab page (general individual entry), select 'partial confirmation' as the confirmation type.
2) On the third tab page (operation indiv. entry), tick 'propose' quantity and 'propose' activity.
Now, go to OPK0. Here, either change in the existing active profile or create another profile and tick it as active. Then, inside the profile, do the following:
1) On the first tab page (are selection), for the detail area 'activities' select "Activities: activity 1 - actitivity 6 (table control)
2) On the second tab page (default), select 'partial confirmation' as the confirmation type. Also select 'immediate proposal' for quantities and services
I am assuming that the production would carry out confirmation in CO11N.
After doing this, whenever QM would do the confirmation of activities, then proportionately the activities would be confirmed. This would be partial confirmation. After this, production people would access CO11N and do final confirmation. At this time, enter anmy changes in the activity values. You will be able to see a table giving actual and planned values for activities. If there are no changes, then just post the final confirmation.
Make sure that when QM confirms, it is a partial confirmation.
Carry out the process now and tell me in case of any issues.
Regards,
Shrenik

Time Machine does not cope well with nearly-full disk

Although Time Machine is supposed to delete old backups when the disk fills up, under some circumstances it does not cope well with a disk-full condition.
Hardware: iMac (mid 2007)
OS: Mac OS X version 10.6.8 (Snow Leopard)
Processor: 2.8 GHz Intel Core 2 Duo
Memory: 2 GB 667 MHz DDR2 SDRAM
The other day I noticed that I had not had a successful Time Machine backup in over a day. Backups were taking a long time to run (4 hours or more), during which time the backup disk was chattering constantly and the disk showed "Estimating index time" in the Spotlight menu (even though I had excluded the disk from Spotlight indexing). When the disk finally stopped chattering, the backup finished with no visible errors but Time Machine continued to state that the last successful backup was yesterday. The backup disk was nearly full, but I had assumed that Time Machine was designed to cope with this situation by deleting old backups.
A complete annotated log file of the incident and my observations can be found here: http://bentopress.com/backup.log.zip
Here are some of the interesting entries from the system.log file:
Sep 7 16:22:14 Bento-iMac com.apple.backupd[56515]: Starting standard backup
Sep 7 16:22:14 Bento-iMac com.apple.backupd[56515]: Backing up to: /Volumes/My Backup Disk/Backups.backupdb
Sep 7 16:23:07 Bento-iMac com.apple.backupd[56515]: No pre-backup thinning needed: 100.0 MB requested (including padding), 137.2 MB available
Sep 7 16:25:49 Bento-iMac com.apple.backupd[56515]: Copied 32984 files (23.7 MB) from volume iMac HD.
Sep 7 16:25:53 Bento-iMac com.apple.backupd[56515]: No pre-backup thinning needed: 100.0 MB requested (including padding), 108.4 MB available
Sep 7 16:25:57 Bento-iMac KernelEventAgent[47]: tid 00000000 type 'hfs', mounted on '/Volumes/My Backup Disk', from '/dev/disk1s3', low disk, very low disk
Sep 7 16:25:58 Bento-iMac mds[45]: (Normal) DiskStore: Rebuilding index for /Volumes/My Backup Disk/Backups.backupdb
Sep 7 16:25:58 Bento-iMac KernelEventAgent[47]: tid 00000000 type 'hfs', mounted on '/Volumes/My Backup Disk', from '/dev/disk1s3', low disk
Sep 7 16:25:59 Bento-iMac mds[45]: (Normal) DiskStore: Creating index for /Volumes/My Backup Disk/Backups.backupdb
Sep 7 16:26:00 Bento-iMac KernelEventAgent[47]: tid 00000000 type 'hfs', mounted on '/Volumes/My Backup Disk', from '/dev/disk1s3', low disk, very low disk
Sep 7 16:26:00 Bento-iMac mds[45]: (Warning) Volume: Indexing reset and suspended on backup volume "/Volumes/My Backup Disk" because it is low on disk space.
Sep 7 16:26:02 Bento-iMac mds[45]: (Normal) DiskStore: Reindexing /Volumes/My Backup Disk/.Spotlight-V100/Store-V1/Stores/35367D91-8096-4D43-802B-A8658DBAB581 because no basetime was found.
Sep 7 16:26:02 Bento-iMac mds[45]: (Normal) DiskStore: Rebuilding index for /Volumes/My Backup Disk/Backups.backupdb
Sep 7 16:26:04 Bento-iMac mds[45]: (Normal) DiskStore: Creating index for /Volumes/My Backup Disk/Backups.backupdb
Sep 7 16:26:14 Bento-iMac com.apple.backupd[56515]: Error: Flushing index to disk returned an error: 0
Sep 7 16:26:14 Bento-iMac com.apple.backupd[56515]: Copied 776 files (17.3 MB) from volume iMac HD.
Sep 7 16:26:15 Bento-iMac com.apple.backupd[56515]: Backup canceled.
Note the "error: 0". Error code zero normally indicates success.
There were also many, many, many copies of the following message, which occurred while Spotlight was trying to index the backup disk:
Sep 7 17:28:40 Bento-iMac com.apple.backupd[58064]: Waiting for index to be ready (100)
Here's what I think is happening: at the very end of the backup, after the files have been copied to the backup disk, mds resets indexing because the disk is now full. backupd's attempt to flush the index to disk then fails because indexing is suspended (error zero), so the backup is canceled. I suspect that this may occur when the new backup and the old one(s) being deleted are both small enough that the disk "packs" tightly, leaving no room for the index. If a large (>500MB) old backup had been deleted to make room for a small (<100MB) new one, the problem would not have occurred.
I worked around the problem by switching Time Machine from the full disk to my Time Capsule. (I did not have this system backing up to the Time Capsule originally because I purchased the Time Capsule later for a different system.) The downside of this is that I lost access to older backups (though they are still accessible by right-clicking on Time Machine in the dock and selecting "Browse other Time Machine disks..."—however, I have not actually tried this). I'm also not completely happy having both my main systems backing up to the same hardware, but everything seems to be working well at this point and I do have a secondary backup system, using SuperDuper to clone the systems' disks to an external HD, which I do about once a month.
Although I have worked around the problem, I am posting this in the hope that it will be useful to someone else, in the hope that someone at Apple will notice and perhaps improve the performance of Time Machine in this situation, and also in the hope that someone can suggest a solution that does not involve throwing a bigger disk at the problem. Is there any way to free up space on Time Machine's backup disk, for example by manually pruning older backups, either through Time Machine itself or via the Finder or command line?

If you suspect that the disk being full is the problem, have you tried deleting some of the old backup data on the TM disk?
When in TM, go back to the past a long way, right click on a file/directory and select "delete backup". Do this on some big files you have (so that you get more space per removal) that you change all the time (so you'll still have recent backups).

How to avoid actual cost error log while confirm production order activity

Hi
I dont want to post actual activity cost via production order activity confirmation. But i want standard value keys for my production duration purpose. So,i defined activites(strd value key) in work center without assigning cost center to that work center. While i confirm in CO11N, system throws erro log as Actual cost calculation contain errors and allows me to confirm the activities. I am doing MB31 and all CO settlement activities also. But when i try to close the order it says error log exists,so closing of order is not possible. How to overcome this problem as i dont want to capture any cost of activites via production order,but i want confirmation only for production analysis.

Hi
Issue is resolved thru PP forum. Thanks for ur reply.
Solution lies in Control key of routing and BOM costing relevancy.

System not populating any report in V_UC

Hi all,
i am runing report Incomplete Outbound Deliveries V_UC system not populating report can any one guide me where i am wrong
while executing V_UC report.
Thanks
Ram

Hi,
Goto the t.code "V_UC".
Ensure that correct SD document category is selected in the selection screen.
Select I for "Order" or "J" for delivery etc...
Goto the T.Code "0VLK".Select your delivery type.Details.
Check what is the document category assigned to it.
Maintain the same in "V_UC".
Execute.
Regards,
Krishna.

System not copies capacity category,splits while confirmation in CO11n

Similar Messages

Maybe you are looking for