System status ECUS in equipment

Hi experts,
I have a doubt:from standard when the system status in equipment is ECUS (BS22 I0188), for example after movement 601, do the stock informations in label 'Ser.data' must be update automatically by the system or not?i have not found reference in OSS or library
Thanks in advance
regards
massimiliano

Yes. The stock information in serial data tab will be updated automatically.
For example..
1) AVLB: serial data (equipment) exist but not stock yet
It must be no stock information.
2) ESTO: stock in warehouse of plant
It must be stock information like plant, storage location, sales order, etc
3) ECUS: stock at customer site (no stock in plant)
It must be no stock information because sold already.
Do you have any problem?
Regards
Luke

Similar Messages

System status blank for equipment - no changes allowed

Hi,
We want to dismantle an equipment as it is no longer at the customer's location.
When I go in IE02, I get following message.
"Change technical object" is not allowed (EQU 10051040 )
    Message no. BS002
Diagnosis
    The transaction 'Change technical object' is not allowed for EQU
    10051040, because no status is set to permit it.
System Response
    You cannot carry out the transaction 'Change technical object'.
Procedure
    You can carry out this transaction if you set a user status, which
    permits 'Change technical object'.
I put the User Status on "Released", but still not possible to change the equipment.
When checking the System Status, I noticed that it is blank.
As no changes are allowed, I cannot manually change the System Status.
Also in IQ02 I get the same message and no System Status is filled.
Anyone an idea how to workaround so we can dismantle the equipment?
Thanks in advance for your inputs!
Best regards,
Geert

Pete,
Yes I have run that program, but it hasnt changed anything. There is a user status AVLB in the equipment. When i checked in the status profile, this user status is not forbidden for any transactions. The program RISTEQ03 seems to work if there no user status also. But for my case, a user status is there, but there is no system status. Since there is no system status, the equipment could not be accessed through change mode (ie02). I need the system status AVLB in the equipment. The equipment does not even have any other details like functional location, maint. plant, sales area data, etc. in it.
Nazeer

How to suppress the system status of an Equipment from display ?

Hi,
I am working with transaction IE02 and IE03 and would like to surpress the display of the system status on the transaction.
I have checked config for screen groups and screen fields and have not been able to find a solution.
any ideas are greatly appreciated.

Hi Chaitanya,
You should be able to hide those fields by creating a standard variant(If you want to hide those fields for everyone executing those transaction) for the same transaction.
Please have a look at transaction SHD0 to accomplish the same.
Thanks
Narasimhan

EQUIPEMENT - User status and system status

Hi freind,
It would be great help if someone can brief me on procedure / bapi or function module availability for USER STATUS and SYSTEM STATUS update to equipement.
regards
Pravin

hi Pravin,
Check this out
USER STATUS
http://help.sap.com/saphelp_erp2005/helpdata/en/56/254c40cc538437e10000000a155106/frameset.htm
SYSTEM STATUS
http://help.sap.com/saphelp_erp2005/helpdata/en/bd/7924da4d0d9043b426fc081669f27a/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/9f/972f72ec2a40479d2a7dec4500a4f2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/68/ebac18beabc34b90d4c1949a66dece/frameset.htm
USER STATUS/SYSTEM STATUS
http://help.sap.com/saphelp_erp2005/helpdata/en/89/a432ff461e11d182b50000e829fbfe/frameset.htm
Regards,
Santosh

Urgent: error: user status ECUS is active for equipment.

Gurus,
My material is assigned to only one serial no. and one equipment.
I am trying to do pgi from va02 and the system is throwing an error saying ' user status ecus is active for equip.' but in iq02 when we check the ecus status is not active. infact when we change the user status to anything the error thrown is still the same. Kindly reply urgently as this is affecting the clients production process.
Thanks,
Anand.

hi
i think once you have delivered the material ,it will create the equipment master record record stating the status as installed at customer site,
the status you have said i think is user status ,if so kindly change the user status and proceed with the above said procedure
revert back with any further queries
regards
thyagarajan

System status in equipment master

Hello all,
In the equipment master the system status is showing ESTO HUAS SLOR. Is this correct? The material with this serial number is in stock - so ESTO i s valid. But it is not assigned to any sales order (Cross checked table EQBS)...What makes this combination work (System status).
Also, in the action log it says previously it was assigned to sales order but now its in inventory. How to correct this. Please help.
Thanks
RJS

Hi,
Please clarify that after assigning to sales order have you performed return delivery? Because of this might the link between ESTO and sales order is not there. To assign the ESTO to sales order as EDEL go to the trx BS22, search the status EDEL. Then , you double-click on short text, Search operation PMS8 and set flag "enable" o "warning". Whit this setting, You can post a delivery whit status ESTO EDEL. Hope it works. Thanking you.

System status and configuration tab in equipment master.

Hi,
Will some one expalin following points.
1.Can we add / modify system status in configuration.-if yes path for the same.
2.Is system status linked to user status-if yes path for the same.If no on whhich basic system status is changed .
3.What is use of configuration data tab in equipment master.Is this required for creating work order,notification ,task list etc.Is their any link between equipment master and material master.
Thanks & Regards
Vinay

Vinay,
1. Yes you can add modify system status using transaction BS22. However these are system delivered functionality and its not advisable to change these.
2.Its the other way around. User status can be linked to system status through the configuration for user status.Double lick on the user status definition to reach the system status dependencies editor in transaction OIBS.
3. Equipment master and material master can be linked either through serial number functionality (Material number + serial number = Equipment number) or through the "Construct" field(Structure tab) in the equipment master. The configuration data tab is used to link equipment master to a pre-existing variant of material. [Sap Help|http://help.sap.com/erp2005_ehp_04_sp/helpdata/en/01/d5454a4ab311d189740000e8322d00/frameset.htm]
Regards
Narasimhan

Valid System Status for Floc or Equip

Hi all,
I am finding my way to find all the valid system status for Func Location and Equipment; hope someone can give me an answer to it :). When I go to tcode BS23, I can see all the system status are there.
However, how do I know which one are valid for Equipment for example. I know that AVLB, INST, INAC, DLFL are available as I commonly seen it. But how about the rest of the system status that can be attached to Equipment?
Regards,
effie7am

Hi NPB,
That is how we define the initial system status for that object. I have tried to go to the object types in BS23 and then choose the object then: go to >> object type info.
However, for equipment it is only given AVLB which is for me is not right. But for functional location and maintenance order, it seem showing all the necessary system status that are available in there.
Anyhow, that for giving me some idea on hor to dig into it.
Regards,
effie7am

Set system status of equipment according to movement type

Hi guys,
I hope someone can help me.
I created two new movement types 943 and 944 as copy of standard 343 and 344.
I'd like to set the equipment status to ELOK if equipment is moved via 344 and delete the status after moving with 343.
I created two new business procedures ZSUH (for 944) and ZSUS (for 943) and did the necessary settings in BS12/BS22/BS32 I think.
If I now do the movement, the status of the equipment isn't changed.
If I manipulate the standard business procedure PMSU to set status ELOK, it's working.
What did I wrong that my newly created one don't work?
Thank you for any help!
Regards,
Florian

has anyone a suggestion?

Status of child equipment after delivery

Hi All,
I have finished goods equipment and raw material equipment. I have maintained the structure of the FG equipment.
In repair process, i can get the FG equipment as well as the raw material equipment.
When i deliver the FG, the status of the FG equipment changes to "ECUS" but the ststus of the raw material equipment (i.e. child equipment which is maintained in the structure of the FG equipment) does not change. In repair process, when i need to inbound the equipment w.r.t repair order, the status of the equipment should be "ECUS"
Here how can i change the status of the child equipments which are maintained in the structure.
Regards,

Hi,
How are you maintaing the Raw material equipment? as Subequipment of the FG? or in Equipment BOM?
Also let me know the status of Raw materal Equip.
If it is subequipment, the Equipment status can be changed by Edit>Spl Serial No. FunctionsManual Transaction-->To Customer .. will change the status to ECUS...
Babu
Edited by: BabuCS on Aug 20, 2009 4:27 PM

System status field table name

Dear all,
I required help from all of you for finding the table name for system status of equipment
Thanks
Raghav

Hi,
JEST - Individual Object Status
JCDS - Change Documents for System/User Statuses (Table JEST)
TJ02T - System status texts
TJ30T - Texts for User Status
To access jest/jcds use EQUI-OBJNR.
Regards,
Maria João Rocha

Linking the system status to user status.

Dear all,
In the customising we have the provision of creating user profile. My requirement is if the system status is having a certain value like ESTO - in the equipment master then this should automatically set the defined user staus and prevent user from modifing the record (equipment master) and when the system staus is changed as AVLB, then the user status should also change and permit user to modify the record.
Experts help is expected.
Can anyone suggest any method of adopting the same - is there any settings for this.
Regards,
M.M

I was able to get the statuses in a table , and as theer are more than one entry fo each of teh WBS so I need to concatenate the systme statuses together and user statuses togerher and finally concatenate the user status and system staus togehter in one field .
SO like fo system status I ahve 3 entreis , I need to concatenate them into one . But somehow when I loop and try concatenating them only the last entry is registeredd and similary for the user status too . Is there a= way I can concatenate so all teh three entries show in like a string
Right now the system status are AVEC, CTRD, SYST in my internal table as three values , how do i concatenate them into one string?
Thanks

Change the system status

hi all,
I want to chang the equipment system status to equipment at custome site, how to do this please guide me,
thanks
Amit ranjan

hi,
check these transactions.
IA02 Change Equipment Task List
IB02 Change Equipment BOM
IB05 Change Equipment BOM Group
IB08 Change Equipment BOM - Plant Alloc.
IE02 Change Equipment
IE05 Change Equipment
IE06 Change Equipment
reward points if hlpful.

IE03 system status

I would like to which table stores the system status information for an equipment.
Thanks.

Hi,
Please check these tables.
TJ02
TJ02T
TJ30
TJ30T
JEST
JCDS
Regards,
KK

System Status display

Hi,
I am facing problem where in the system status for all objects like maintenance order, notifications, equipment is not displayed in status bar. When I click 'i' to see status it displays me the status but not in the status bar.
Can any one provide me a solution for this
Thanks

Hi, Alex, thanks for responding. The users do not receive a no authorization message when they change the editing mode, and yes, they can save any changes. What is interesting is that I started making changes to other authorization objects under "Controlling" and I think I'm getting closer, I've limited users to be able to set the "Lock" status only, so once I find out how to restrict that option, I think I'm golden.

System status ECUS in equipment

Similar Messages

Maybe you are looking for