SystemAdmin Right Problem

Hai experts ,
1. When i started the Server Manager(BPC), it prompt out "Your login ID (Administrator) does not have Sysadmin rights. You must log on with a user ID that has sysAdmin privilleges." How to solve this problem ??
2. My SQL Server 2005 already upgraded to SP2, but the requirement status (SQL Server Version, SSRS, OLAP) still display incorrect. What is the problem ?
Thanks alot !!!

Thanks for the help - I had a similar issue. What I did (and I assume this is what was implied since it worked)
I have a multi-server environment.
1. Logged into the application server as user account I want to be the sysadmin
2. found OsoftSetup.exe (for me it was "C:\BPC\Websrvr\Web\Installation\OSoftSSIS_Client.zip")
NOTE - also found it unzipped at "C:\BPC\Websrvr\Web\Installation\OSoftSSIS_Client"
If you extract it from the zip ensure that you extract all the supporting folders/dlls.
3. Ran it and specified my SQL server and appropriate user account and clicked OK. (NOTE it defaults your username with the wrong domain) This took about 5-10 minutes to complete.
after this was complete I was able to run the server manager without trouble.
A step that I went through that I don't think was neccesary, but it's something I did none-the-less was run this script on the SQL server (replace your username etc as neccessary). All this did was make the user account a member of the sysadmin roll inside of ApShell in BPC.
USE AppServer
go
insert into tblappsetaccess (AppSetID,UserID,UserType) values('ApShell','MYDOMAIN\MyUser','7')
select * from tblappsetaccess
order by appsetID
Edited by: Carl Steffen on Nov 21, 2008 3:26 PM

Similar Messages

Access rights problem

I have set up two OID instances to talk between one another and think I have the mapping files correct.
I now see Insufficient Access Rights in the logs. Does anyone have any ideas what this could be? Does the exchange between servers run under a specific user?
orclOdipSynchronizationStatus: Mapping Failure, Agent Execution Not Attempted
orclOdipSynchronizationErrors: Error Creating Entry in OID
Sleeping for 1secs
Exception creating Entry : javax.naming.NoPermissionException: [LDAP: error code 50 - Insufficient Access Rights
]; remaining name 'cn=[email protected],cn=users,dc=hoc,dc=test,dc=com'
[LDAP: error code 50 - Insufficient Access Rights]
OIDUserImport:Error in Mapping EngineODIException: DIP_OIDWRITER_ERROR_CREATE
ODIException: DIP_OIDWRITER_ERROR_CREATE
at oracle.ldap.odip.gsi.LDAPWriter.createEntry(LDAPWriter.java:975)
at oracle.ldap.odip.gsi.LDAPWriter.insert(LDAPWriter.java:328)
at oracle.ldap.odip.gsi.LDAPWriter.writeChanges(LDAPWriter.java:239)
at oracle.ldap.odip.engine.AgentThread.mapExecute(AgentThread.java:406)
at oracle.ldap.odip.engine.AgentThread.execMapping(AgentThread.java:262)
at oracle.ldap.odip.engine.AgentThread.run(AgentThread.java:155)
Regards

Do let us know if you find the answer. I've been stuck for days on an LDAP access rights problem.

Administrator rights problem Windows 2008 R2

Hello,
I have a problem on a Windows 2008 R2 server member of a workgroup. It seems to be a rights problem. I have the problem with all accounts (administrator, another account member of administrators group and any other new account created for testing member
of admin group or not).
When i click on the explorer button in the task bar, an error message is displayed and explorer is not launched : Windows cannot access the specified device, path, or file. You may not have the appropriate permissions to access the item.
Same message if i double-clic on explorer.exe in c:\windows folder. I can browse my computer by using the "my computer" in start menu.
When i launch internet explorer, it crash immediately, the window is closed.
If i launch the disk management console, i have a message : You do not have access right to Logical Manager
I have tryed to install the update KB2444677 and it fails with an access denied error.
UAC have always been disable but now i cannot launch c:\Windows\system32\UserAccountControlSettings.exe. When i double clic on the icon nothing happens.
I have disabled IE ESC but no change.
The problem occur also under safe mode.
Anybody have an idea about this problem ?
Regards

Hi PimPamPoum_59,
Please also try Go to component Services à Right Click My Computer
à Properties
à Default Properties
à Make sure Default Impersonation level is set to 'Impersonate'
in windows server 2008 r2.
For the more detailed information, please refer to this thread:
Windows Server 2008 - Unable to access Disk Management and other components - MMC Snap-in problems:
http://social.msdn.microsoft.com/Forums/windowsserver/en-US/d1576093-e000-45c5-a047-d06a5dd6f9f4/windows-server-2008-unable-to-access-disk-management-and-other-components-mmc-snapin-problems?forum=winserver2008appcompatabilityandcertification
I hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

DIAdem 9.1; Windows2000; right problem; "Configuration-Drive Write Protected" for USER

Hallo community !
similar to these threads
http://forums.ni.com/ni/board/message?board.id=60&message.id=322&requireLogin=False
http://forums.ni.com/ni/board/message?board.id=60&message.id=647&requireLogin=False
i run into problems working with DIAdem 9.1 on Windows 2000 SP4!
The Diadem installation went quite well.
My problem:
only "Administrator" and "Power User" have the privilige to "WRITE" to the DIAdem install directory.
Trying to start Diadem as non priviliged USER I get something like:
DIAdem Configuration-Drive "C:\PROGRAM FILES\ NATIONAL INSTRUMENT\DIADEM 9.10" WRITE PROTECTED!
I installed & started DIAdem for one
time with Administrator rights. I activated the Product and exported
the KEY to a License Server. Everything works fine for Power Users an
Administrators. Only "simple" USERs are not able to start Diadem due to
missing WRITE permissions. i can't grand this permissions to
normal USERs :-(
Playing around in Registry -> "RegWriteAccessAllow" ("0","1") (DWORD) (HKEY_LOCAL_MACHINE/Software/National Instruments/Diadem/9.10),
didn't solved the problem.
I switched back to "local License" Managment (local Key files) but the Probelm persists.
thanks in advance
P.S.
Quote: "You have to be at least a "Power User" in Windows 2000 to run DIAdem in Windows 2000."
http://forums.ni.com/ni/board/message?board.id=60&message.id=102&requireLogin=False
is this right ?
Message Edited by DirkT on 08-01-2005 03:58 PM
Message Edited by DirkT on 08-01-2005 04:02 PM

Hi DirkT,
Running DIAdem with User rights has different aspects we need to look at.
1) Registry Write Access
Launching DIAdem the first time with administrative rights registers some OLE components in the registry. After this step no more Admin rights are necessary for the registry. However running DIAdem as user might result in error messages as DIAdem tries to re-register the components again. You can avoid this by setting the RegWriteAccessAllow Key to 0 (see online help under "Administrator Notes")
2) File / Folder Write Access to the DIAdem Installation Folder
DIAdem needs write access to certain files e.g. the error logfile DEM_ERRS.001 or DESKTOP.DDD when saving configurations. You may change the folder where these file are being stored and searched for to a writeable folder by launching DIAdem with the "/d<NewFolder\MyDesktop.ddd>" start parameter or by setting the environment variable "DemDDD" to that folder. Then move the following files from the DIAdem installation folder to your new writeable folder:
*.ddd
userpar.par
dem_errs.*
3) File / Folder Write Access to other Folders
There are a number of other folders that DIAdem 9.x needs write access to and which cannot be changed. All of these folders are located by default under "%ProgramFiles%\National Instruments\Shared". Currently you need your Admin to give you write access to that folder and below
For future versions of DIAdem the team is working to make running under user rights easier.
Hope that helps,
Marcus

Reader Extension rights problem in Adobe Reader 9.x

Hi Experts,
I was working on ADLC 8.2.3 version shipped by SAP.
I am using reader 9.X
My Development have one data source being used by 2 different dynamic forms where forms content enable and disable dynamically based on user inputs.
Every time I save the form with data changes it saves as a new version. no problem with this.
When I create for the 1st time v 0001 is created.
now I open 0001 edit and save V 0002 is created.
Again when I open V0002 to edit the following message is displayed.
"This document contained certain rights to enable special features in Adobe Reader. The document has been changed since it was created and these rights are no longer valid. Please contact the author for the original version of this document."
This is been happening very recently and only with form 2, form 1 works fine.
Also when I searched this error i found that it was bug in reader 8.1.. and a patch is relased on top of it, but i am using 9.X.
Couple of Adobe fourms says this happens if the ADS server and the client with adobe reader are in different timestamp and zones this causes the problem, but i check with our basis both are in same location and time stamps.
Can somebody help me what was the reason behind.
Thanks & Regards,
Sai Krishna.

Hi Chinta,
This the development in CRM 7.0 using webrequest which uses ZCI layout.
Towards this web request I have form 1 and form 2 which are basically request category views of Adobe form layout.
In CRM UI we have a button on click of it, form1 is poped up in a window with edit mode and in version 0001.
in init method of the badi impl we fetch data for application object and set values to the webrequest fields.
Based on these fields value form enable and disable subforms on form ready event.
User fills in the form he then either saves it as draft or final submit (for this I have a flag field based on this value I make the entire form sections as protected). in either of the events form1 is saved with this version 0001.
Now user will have dropdowns with versions and form names.
Here he can see only one version 0001 in version Dropdown and 2 different forms in view dropdowns.
He selects the version 0001 and form2.
click on edit, the form2 is opened in edit mode, some of the fields data come from form1 and init methods, these values again make the form content visibility dynamically. Also we have couple of dynamic rods added etc as we do normally in adobe forms.
again he saves it draft or final submit (again here based on a flag value we make the form content protected), so here say he saves it as draft. Now this is saved as version 0002.
Note: version is on web request structure so for every change to the data it will create a new version and every version is linked to these defined forms.
So now in CRm UI user can see 2 versions and 2 forms for each version.
User selects version 0002 & form2 and clicks on edit.
Screen refreshes and should open the form2 in edit mode to continue, but here i get a popup message as detailed in this theread early post.
I tried to put the explanation as detailed as possible,
Please let me know if you need more info.
Thanks & Regards,
Sai

Reader Extension rights problem in Reader 9.x

Hi Experts,
I was working on ADLC 8.2.3 version shipped by SAP.
I am using reader 9.X
My Development have one data source being used by 2 different dynamic forms where forms content enable and disable dynamically based on user inputs.
Every time I save the form with data changes it saves as a new version. no problem with this.
When I create for the 1st time v 0001 is created.
now I open 0001 edit and save V 0002 is created.
Again when I open V0002 to edit the following message is displayed.
"This document contained certain rights to enable special features in Adobe Reader. The document has been changed since it was created and these rights are no longer valid. Please contact the author for the original version of this document."
This is been happening very recently and only with form 2 form 1 works fine.
Also when i searched this error i found that it was bug in reader 8.1.. and a patch is relased on top of it, but i am using 9.X.
Can somebody help me what was the reason behind.
Thanks 7 Regards,
Sai

Hi Niall,
Thanks for the reply.
But both my ADS (Adobe document service) server and my development / test environment are in same location thus same time Zone.
Also how does this imapct the form.
Lets say I created version 0001 @ 1:00 PM
Version 0002 is created @ 1:05 PM
I opened v 0002 in edit mode @ 1:30 PM at all times since I am in same environment this shouldn't hamper the process unless I opened the 0002 version in edit @ 1:30 Pm and if this publication from the server had a turnaround time of 2 minutes then by the time i see the form its 1:32 PM.
Can this be the reason...?
Thanks & Regards,
Sai

CSS Align right problem

Hi
I am using the following css to align a div to the right hand
side of the
page:
#headerRight { RIGHT: 10px; MARGIN-RIGHT: 0px; POSITION:
absolute; TOP: 5px;
align: right; border: 0; width: 235px;}
The above seems to work well, except for one small annoying
problem. If the
content of the page is wide and causes the horizontal scroll
bar to appear,
then the div seems to work as it appears 10px from the right
side of the
window. However if I move the horizontal scroll bar over to
the right, then
the div doesnt move accordingly.
If I then resize the browser window, then the div moves and
always lines up
10px from the edge no matter what size the window is.
Anyone know where I am going wrong, or need any more
information?
Thanks
Brendan
Rate your experiences with your UK and Ireland builders at
http://www.ratethebuilder.co.uk
=========================================

Solved the problem by using the following javascript code:
function scrollDetect(){
document.getElementById("headerRight").style.left =
document.body.clientWidth - 245 + document.body.scrollLeft;
setInterval("scrollDetect()", 500);
Where 245 is the width of the div.
Only problem is that the code probably isnt cross browser at
the moment, but
I'll work on that.
Thanks again for all your help.
Rate your experiences with your UK and Ireland builders at
http://www.ratethebuilder.co.uk
=========================================
"RateTheBuilder" <[email protected]>
wrote in message
news:[email protected]...
> Osgood
>
> Sorry, would love to post a url, but content is
sensitive.
>
> Basically I have a div which stretches the width of the
page which
> contains the header details. Then on top of this div but
to the very right
> of the page I have a div that I have absolute
positioning set. This div
> must remain the set distance from the right of the
screen (10px) even when
> the user is scrolling horizontally.
>
> Thanks for your time so far and I hope I've shed a
little more light.
>
> Brendan
> ______________________________________________
> Rate your experiences with your UK and Ireland builders
at
>
http://www.ratethebuilder.co.uk
> =========================================
>
> "Osgood" <[email protected]> wrote in
message
> news:[email protected]...
>> RateTheBuilder wrote:
>>
>>> Osgood
>>>
>>> There is no content on the same level as the div
to the right, but the
>>> content below the div may extend the width of
the page. There are other
>>> divs on the same level as the one I want to keep
right and I have the
>>> problem div above them, so that is why I used
absolute positioning.
>>
>> Sorry i'm lost.
>>
>> You say you have no content on the same level as the
div to the right and
>> then say there are other divs on the same level as
the one you want to
>> keep right?
>>
>> Can you post a url to the page in question?
>>
>
>

NI-DAQ Administrator rights problem

I've got a VB6 program using a PCI-6024E board with Ni-DAQ 7.2 under Windows 2000
The program works fine when I log in as Administrator, but when I log in under a user account I get a "Runtime Error 10459 Configuring Channels. The NI-DAQ DLL could not be called due to an interface error."
I also cannot run the NI-DAQ test panels under the user account.
I can't install the NI-DAQ driver under the user account as it's needs admin rights!
Anyone know how to allow an application to run under a user account?
Obviously I don't want the operators to log in as administrator.
Thanks
Dave

Hi Dave,
There are a couple of forum postings dealing with this same issue.
http://forums.ni.com/ni/board/message?board.id=170&message.id=91569&requireLogin=False
http://forums.ni.com/ni/board/message?board.id=250&message.id=6564&requireLogin=False
Both seem to provide the following steps as a possible solution.
"Complete the following steps to set up permission for the MAX\Data directory:
1) Browse to the C:\Program Files\National Instruments directory.
2) Right-click the MAX folder and select Properties.
3) Click the Security tab, and click the Add button. Type in the user name and click OK.
4) Give the user Read & Execute, List Folder Contents, and Read permissions.
5) Click Apply and then OK."
That should resolve any DAQ problems you're having with user accounts. Please let me know if you have any more problems with this.
Regards
Matthew Slaughter
Applications Engineer
National Instruments
LabVIEW Integration Engineer with experience in LabVIEW Real-Time, LabVIEW FPGA, DAQ, Machine Vision, as well as C/C++. CLAD, working on CLD and CLA.

PA40 user rights problem

Hi all,
we have a problem in our user rights management.
Our HR users should be able to create an 'org. management (mini master)'. So we gave them the right to tcode PA40.
If they try to do this, they got the error 'No authorization to maintain Actions 52 exists' (messageNo. PG175). They even cannot search existing people ('No values found').
Any ideas are very appreciated.
Many thanks.
Tom

Not enough to just give TCODE, P_ORGIN must also be congigured correctly.
e.g UNder Actions INftype, they need access to "52" in subtype field.
Under Authorization Level, they need access to value "M" if they want to use search helps.
Edited by: Harish Krishnan on Apr 2, 2009 1:55 PM

Migrating Designer 2.1.2 to 9.2.0.9, access rights problem

Hi,
I am trying to migrate Designer from 2.1.2 to 9.2.0.9 and got some problems in access rights. We have about 30 sub-ordinate users and over 30 different applications in our Repository.
In Designer 2.1.2, if a user shared a table from an application to another user's application, that user was not allowed to change any properties of the original table. In Designer 9.2.0.9 it seems that you can change the properties in the property palette, but if you try to save the changes, you then get an error message.
Can somebody tell me if this is really an error or just a feature of Designer 9i?
Liisa

Just for the record. I found the solution to my problem. Checking more logs I read this:
The installation has encountered a unrecoverable internal error. For further assistance report the following information to your support provider.
"/usr/local/cm/script/cm-dbl-ontape_backup-install RU PostInstall 9.1.2.11900-12 7.1.5.30000-1 /usr/local/cm/ /common/component/database /common/log/install/capture.txt " terminated. Exceeded max time (240)
The system will now halt.
So I accessed the Dissaster Recovery Section on CUCM and deleted the tape backup device that was configured there. After deleting it the upgrade went well.

MSI Group Policy install failing because of administrator rights problem

I have succesfully installed the desktop manager software 4.6 on my PC using the MSI from the CD. I am a domain administrator, when I try to install the same MSI on other users in the domain through group policy who are not administrators the software will not install. I have checked and the policy is definately being applied and it says on logon that the Blackberry Desktop Manager software is being installed but no icon or program group is created.
I don't want to give users administrator rights as the users are not allowed to install software on their PC. Normally software installs through group policy without a problem. I don't want to have to go around to each PC and install manually if I can avoid it.
Any help would be most appreciated.
Solved!
Go to Solution.

Someone else would really need to answer this, but i have my own simple solution we use here.
Create a share file eg //138.218.137.22 etc etc for the user to go to. In here save a copy of the desktop manager. Get them to click and drag it to their desktop and install the file from there. (do not install the file directly from the shared drive)
Is the cd version won't work, get the install.exe from the blackberry site..
If your issue is resolved, put a checkmark in the green box that contains the resolution.
OR
If it was just/or also really helpful - Give it a Kudos.. Go on Mate.. Help the rest of the clueless blackberry user world find their answer too..
~Gday from Down Under~

Rights Problem

ZFD 4 on a Netware 6 server. I use console one for remote control. When I
log in as Admin everything is OK. When I use Tools / Manage remote
operator and give all right to a user to manage workstations the user can
manage the owrkstations. However whe the user logs out and back in the
ability to manage the workstations has gone and I have to do it again.
Why is this ? Thanks for any replies.

Thanks for your reply. The problem has gone away today.
[email protected] wrote:
>
> > ZFD 4 on a Netware 6 server. I use console one for remote control.
> > When I log in as Admin everything is OK. When I use Tools / Manage
> > remote operator and give all right to a user to manage workstations
> > the user can manage the owrkstations. However whe the user logs out
> > and back in the ability to manage the workstations has gone and I
> > have to do it again. Why is this ? Thanks for any replies.
>
> Have you checked if the rights are till there by checking the rights
> manually in C1 ?
> See this one for the required rights.
> http://support.novell.com/cgi-bin/se...i?10095951.htm
>
> --
> Regards, Kai Reichert
> Novell Support Forum Sysop

Right problem with apache and tomcat

Bonjour;
I use a user login "apache" to stop/start Apache and tomcat. Because never launching apache et tomcat as root.
But I have the following problem with apache (file error.log) :
[Tue May 6 17:26:22 2003] [error] Connection "warpConnection" cannot connect
[Tue May 6 17:26:22 2003] [error] Cannot open connection "warpConnection"
[Tue May 6 17:27:01 2003] [error] Re-Trying to deploy connections
As root the error msg does'nt exists (lost)
Best regards;
A+;

Run it from the shell to see whats wrong:
# httpd

Rights problem with Acrobat X pro and Windows 8.1

We have bought a CS6 creative suite, including acrobat X. If we use the acrobat X in cooperation with windows 8.1, then we cannot delete or amend files without needing to save them under another name ....
If we install the try out of acrobat XI, then we don't have these problems ....
Message was edited by: WouterGS

Hello,
Yes we have done all updates that were still pending.
After a few day, the acrobat XI gives the same problems ... so I uninstalled the XI try-out and installed the bought X pro version again .... also here all updates have been done ...We really don't know how to solve this ..
We had the same configuration on a Windows XP and a Windows 7 pc, and there all went without these issues.
I also have another Laptop with the same configuration Windows 8.1 + XI pro, and there we also don't have the issue ....

PDF Form extended rights problem

Hi,
i am working on a php application which opens a pdf form (created with acrobat 9 standard), fills it with user data, saves it as a form and sends this form to the user by email, so he cann fill the rest of the form.
This works fine for pdf forms, which have not the extended rights enabled.
As soon i enable it, the user will get the message that the form has been modified, and he is not able to fill out the other fields any more.
Now my question:
1. Is there any php library which can activate the extended rights of a pdf form after i filled some of the fields?
2. What else can i do?
thank you.
sascha

iTextSharp doesn't enable usage rights in PDF forms, so any changes will invidate the form.
To bypass the validitiy of the Usage Rights, server the XDP data from the buffer of a web server, and point the File to the PDF on the same web server.
Usage rights will still be enabled, and the form can be saved or downloaded.
Also, please be sure to check out FDFToolkit.net, and PDFEmail.net.
Useful Links:
http://www.fdftoolkit.net
http://www.pdfemail.net
Hope this information can help!
Best Regards,
Nick K.
http://www.nk-inc.com

SystemAdmin Right Problem

Similar Messages

Maybe you are looking for