T-codes for warehouse mangement

hi to all
can anybody gives the t-codes used in warehouse management

Hi Ramachandra,
Refer to the link below, all codes starting with L are related to WM. You can also obtain this info from the table TSTC
http://www.easymarketplace.de/transactions-i-l.php
Hope the above is helpful
Regards,
Vivek

Similar Messages

  • T-codes for warehouse management

    hi.
    can anybody gives the mostly used t-codes for warehouse management

    SAP WMS - Decentralized Warehouse Management System Integration Setup
    You can operate the SAP Warehouse Management System (WMS) as a stand-alone decentralized system that is independent of a central Enterprise Resource Planning (ERP) System.
    You make the necessary settings for the ERP (Enterprise Resource Planning) system within the WMS component (Warehouse Management System).
    The steps are set up as a checklist and guide you through the process of configuring the system parameters.
    Checklist (For those with the Table Views used transaction code SM30).
    1. Customizing for "Enterprise Structure"
    - Create storage location in OX09 (if necessary).
    - Define warehouse number in Views V_T3001.
    (you should not copy the warehouse number in the ERP system)
    Activities within a warehouse, like goods movements and physical inventory, are assigned to a specific
    warehouse number.
    The physical warehouse where these activities take place is identified by the warehouse number.
    - Assign plant/storage location to warehouse number in Views V_T320.
    (Valid if the component MM-IM (Inventory Management) is implemented.)
    Fields : Plant + Sloc + WhN
    2. Customizing for "Decentralized WMS integration", section "Central processing" -> Application
    - Activate decentralized WMS in Views V_T340DM.
    - Define interface to Inventory Management in Views :-
    V_156S_WM - Assign WM movement type references to IM movement types
    V_T3211 - Delivery-Relevant Parameters for Reference Movement Type
    V_T340DL - Delivery-Relevant Data for Warehouse Number
    - Exclude stock in decentralized WMS in Views V_T321B
    (if the decentralized WMS is not an SAP R/3 system)
    - Finally do a consistency check for decentralised WMS in transaction OL20.
    3. Customizing for "Application Link Enabling (ALE)", section "Basis Components"
    Maintaining Logical Systems in Views V_TBDLS.
    Assign logical system to client in Views T000.
    4. Make basic settings for RFC in transaction BD97.(if necessary)
    5. Customizing for "Application Link Enabling (ALE)", section "Maintain Distribution Model"
    You can define the Reduce message types and Activate message types in transaction BD53.
    SAP recommends that you use message types :
    "MATMAS" (material master tables) and
    "DEBMAS" (customer master) as a template.
    Be aware that only those fields that are absolutely necessary are transferred from the master data tables in
    the ERP system to the decentralized WMS.
    6. Customizing for "Decentralized WMS integration", section "Central processing" -> Distribution
    Use transaction OL19 to generate distribution model. As far as the application is concerned, when the model
    is generated, application-specific Customizing parameters are modified or set (for example, activate
    decentralized WMS).
    Display or check distribution model
    Generate partner profile in transaction BD82.
    (you can also perform this activity using ALE Customizing)
    Distribute distribution model in transaction BD64 (model view) using menu item "Edit"
    If both the ERP system and the decentralized WMS are SAP R/3 systems, the distribution model should be
    distributed on a central basis only, that is, via the ERP system.
    7. Customizing for "Application Link Enabling (ALE)", section "Maintain Distribution Model" (transaction BD64)
    Activate the change pointers for master data distribution using transactin BD61.
    If necessary, reduce the message types concerned with transaction BD53.
    8. Customizing for
    "Logistics - General" - "Material Master" - "Tools" - "Data Transfer : Material Master" -
    -> "Define required-field check for ALE/Direct Input" (Views V_T130S)
    Define whether an error message should be generated in the receiving system for required fields
    from the material master.
    Reward points if useful.

  • Warehouse mangement t-codes

    hi to all
    pls give me the warehouse mangement related t-codes

    LS01          Create Warehouse Master Record               
    LS01N          Create Warehouse Master Record               
    LS02          Change Warehouse Master Record               
    LS02N          Change Warehouse Master Record               
    LS03          Display Warehouse Master Record               
    LS03N          Display Warehouse Master Record               
    LS04          Display Empty Storage Bins               
    LS05          Generate Storage Bins               
    LS06          Block Storage Bins               
    LS07          Block Quants               
    LS08          Block Storage Bins by Aisle               
    LS09          Display Material Data for Stor.Type               
    LS10          Generate Storage Bins               
    LS11          Change several stor.bins simultan.               
    LS12          Block stor.type               
    LS22          Change Quants               
    LS23          Display Quants               
    LS24          Display Quants for Material               
    LS25          Display Quants per Storage Bin               
    LS26          Warehouse stocks per material               
    LS27          Display quants for storage unit               
    LS28          Display storage units / bin               
    LS32          Change storage unit               
    LS33          Display storage unit               
    LS41          List of control cycles for WIP loc.               
    LS51          Create Batch Search Strategy - WM               
    LS52          Change Batch Search Strategie - WM               
    LS53          Display Batch Search Strategy - WM               
    LSMW          Legacy System Migration Workbench               
    LSO_TP          LS: Participation Document               
    LT01          Create Transfer Order               
    LT02          Create TO for Inventory Difference               
    LT03          Create TO from Delivery Note               
    LT04          Create TO from TR               
    LT05          Process Posting Change Notice               
    LT06          Create TO for Material Document               
    LT07          Create TO for mixed storage unit               
    LT08          Manual addition to storage unit               
    LT09          ID point function for storage units               
    LT0A          Pre-plan storage units               
    LT0B          Putaway of Handling Units               
    LT0C          Picking of Shipping Units               
    LT0D          Stock Transfer of Shipping Units               
    LT0E          Create Removal TO for 2-Step Picking               
    LT0F          Create TO for Inbound Delivery               
    LT0G          Return delivery to stock               
    LT0H          Placement of existing HUs               
    LT0I          Removal of existing Handling units               
    LT0J          Put Away Handling Unit               
    LT0R          Request replenishment manually               
    LT10          Create Transfer Order from List               
    LT11          Confirm Transfer Order Item               
    LT12          Confirm transfer order               
    LT13          Confirm TO for storage unit               
    LT14          Confirm preplanned TO item               
    LT15          Cancelling transfer order               
    LT16          Cancelling TO for storage unit               
    LT17          Single Entry of Actual Data               
    LT1A          Change Transfer Order               
    LT1B          Confirm TO-Item Pick               
    LT1C          Confirm TO-Item Transport               
    LT1D          Confirm Transfer Order Pick               
    LT1E          Confirm Transfer Order Transport               
    LT1F          Confirm TO for SU Pick               
    LT1G          Confirm TO for SU Transport               
    LT21          Display Transfer Order               
    LT22          Display Transfer Order / Stor. Type               
    LT23          Display Transfer Orders by Numbers               
    LT24          Display Transfer Order / Material               
    LT25          Display Transfer Order / Group               
    LT25A          Display Transfer Order / Group               
    LT25N          Confirm Transfer ORder / Group               
    LT26          Transfer orders for storage bin

  • Stock Transfer for Items manged by Batches

    Hi All,
    I am doing a StockTransfer from one warehouse to another using the StockTransfer object, but when an item is a batch item then it doesn’t work, it does not do the StockTransfer nor does it throws error. It just gives the message as ("Failed to add a Inventory Transfer") which is the message I have defined as below.
    Here is the code for StockTransfer, where "A00008" item code is an item manged by Batches.
    Dim InventoryTransfer As SAPbobsCOM.StockTransfer
    Try
    InventoryTransfer = MyCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oStockTransfer)
    InventoryTransfer.CardCode = "C0001"
    InventoryTransfer.DocDate = Now
    InventoryTransfer.FromWarehouse = "01"
    Call InventoryTransfer.Lines.SetCurrentLine(0)
    InventoryTransfer.Lines.ItemCode = "A00008"
    InventoryTransfer.Lines.WarehouseCode = "W5"
    InventoryTransfer.Lines.Quantity = "2"
    Call InventoryTransfer.Lines.Add()
          If (0 <> InventoryTransfer.Add()) Then
    My_Application.MessageBox("Failed to add a Inventory Transfer")
          Else
    My_Application.MessageBox("Succeeded to add Inventory Transfer")
          End If
    Catch ex As Exception
    My_Application.MessageBox(ex.Message)
    End Try
    If an item is managed by Batches then how do I do StockTransfer through code. Can any one provide me the code to do the same.
    Thanks in Advance !!!
    Regards,
    Murtaza

    Hi Murtaza,
    Sorry for the late reply - maybe you found the solution by yourself in the meantime, but let me answer here for other developers...
    Please note that "empty" objects are coming with 1 line ("for free") - i.e. you must not call
    Call InventoryTransfer.Lines.Add()
    This will create a 2nd empty line - and that caused trouble (i.e. errors in the .Add()) in the past!
    Furthermore you have to spacify the batch numbers in the
    InventoryTransfer.Lines.BatchNumbers
    sub-object!
    HTH,
    Frank

  • T Code for Changing material price

    Hi friends,
    Can anybody tell me what is the T-Code for
    1. To change th material price
    2. Transfer posting from Un-restricted stock to block stock
    3. Transfer posting from Un-restricted stock to Quality stock

    Steve,
    I have a requirement
    Daily cycle counts are completed on inventory. SAP prints nightly a count cycle of 50 inventory items to count (Inventory Audit). This is done so our warehouse folks count items throughout the year rather than at the end of the year all at once. Every January 1 of each year the cycle count begins until we finish cycling through the inventory, which usually happens around October.
    When suspend the inventory counts it places the inventory cycle counts on hold for a period of time. The cycling that would usually happen in October of each year is extended out by the days the inventory counts were placed on hold. This is to allow for 100% inventory audit counts. As I understand SAP puts those inventory counts on hold and begins again when it is restarted.
    I will need the TCODE to stop and start the inventory cycle count…
    Can you please help me out

  • T.code for viewing stock at storage bin

    Hi all,
    What is the t. code used for viewing the stock at storge bin?I know this is WM question but your help is appreciated.
    Regards,
    Shailendra

    Hi,
    Following are the T-Codes:
    LS26   Warehouse stocks per material
    LI05    Inventory History for Storage Bin
    LX02   Stock List
    LX03   Bin Status Report
    MB52  List fo warehouse stocks on hand
    Regards,
    Suresh' D.

  • System variable for Warehouse name in Pick list PLD

    Hi Experts,
    My customer would like to show the Warehouse name on the Pick List print layout.
    What is the System Variable to display the Warehouse name on the Pick List?. Iu2019m working with Sap Business One 2007A.. Where can I find the system variables for Chile localization. Thanks Very Much
    Claudia

    Hi Claudio,
    Try this,
    ->> Open the Pick List(System) PLD and Save as the New PLD.
    ->> Open the NEw PLD and Create 1 Database Field(for WareHouse Name) in Repetetive Area.
    Table -> OWHS - WareHouse
    Column -> WhsName - WareHouse Name
    Save as and Run the Print Preview.
    IF will not print the WareHouse Name in Print.
    Do this in PLD.
    ->> Open your PLD.
    --> Ralate to WareHouse Code Field ID in WareHouse Name Field at Content Tab on Properties Window.
    Regards,
    Madhan.

  • Account Code for Item

    Hi,
    1. In existing version of SAP BO, every item in the inventory been tied to a set of GL account code & those account code is preset in the item category. All those GL account, that tied to the item will reflect the marketing documents such as DO and Invoices.
    Is it possible that an account code can be change flexibly on the marketing document due to the different fucntionality of the same item sales?
    e.g - Sales Documents
    line 1: Item A Qty:10 --> GLcode= 100010-11-11 (Default)
    line 2: Item A Qty:2 --> GLcode= 100010-11-22
    2. Can 1 item have multiple item group. (For diffrent acount)?
    Need advice..
    Bruce..

    Hi Bruce or should i say Batman
    Just kidding.To answer your question.
    1)Which account code do you want to change? If you want to change the sales account yes you can do it flexibly. when you got your invoice open click on form settings and you'll see there is GL Account, this will pull through automaticaly the sales account linked to the item depending whether it's set up for warehouse, item group.Can change it manualy, or basicaly write a query that say's, above 5 this acc, above ten this acc.
    2) No, you can't have more than one item group.
    What you can do is set a item to do it's gl on item level, these accounts can be changed as needed but so can the item groups accounts be changed as needed.But you could change the accounts as needed before the document is added, but this would be development. Not 100% sure if it will work, but should.
    Let me know what you think?

  • Master data for warehouse management

    Hi experts what are the master data for the warehouse
    management module.............

    Hi
    Sending you all the table for the warehouse mangement.
    Inventory document
    IKPF Header: Physical Inventory Document
    ISEG Physical Inventory Document Items
    LINK Inventory document header in WM
    LINP Inventory document item in WM
    LINV Inventory data per quant
    Storage locations and stocks
    LAGP Storage bins
    LEIN Storage unit header records
    LQUA Quants
    LQUAB Total quant counts for certain strategies
    MEIK Make-to-Order Stock for Customer Order
    MSCA Sales Orders on Hand with Vendor
    MSKA Sales Order Stock
    MBPR Stock at Production Storage Bin
    MLGN Material Data per Warehouse Number
    MLGT Material Data per Storage Type
    Rewards if useful.
    with regards
    Nikunj Shah

  • SPRO settings for warehouse

    Hi ,,
    Can anyone please help to set this Warehouse and subcategories scenario with SPRO..
      Warehouse Number
           -  Storage Type( like bulk .. )
                   -  Storage Section/ Picking Area
                          - Storage Bin
                                 - Quant .
    I am able to define only warehouse number . How to set the rest .
    Please Help ..
    Regards,

    12.1     Creating Warehouse
    Transaction code     SPRO
    IMG menu     Enterprise Structure  Definition  Logistics Execution  Define, copy, delete, check warehouse number
    12.2     Defining Control Parameters for Warehouse Number
    SAP menu     Logistics Execution  Warehouse Management  Master Date  Define Control Parameters for Warehouse Number
    Transaction code     SPRO
    12.3     Spool Parameters for Transfer Order Printing
    SAP menu     Logistics Execution  Warehouse Management  Activities  Define Print Control
    Transaction code     SPRO
    12.4     Profile for Sorting during TO Print Procedure
    SAP menu     Logistics Execution  Shipping  Picking  Lean WM  Define Print Control
    Transaction code     SPRO
    12.5     Transfer Order Print Indicators
    SAP menu     Logistics Execution Warehouse Management  Activities  Define Print Control
    Transaction code     SPRO
    12.6     Print Program per Warehouse Number
    SAP menu     Logistics Execution  Warehouse Management  Activities  Define Print Control
    Transaction code     SPRO
    12.7     Defining Number Ranges
    SAP menu     Logistics Execution  Warehouse Management  Master Data  Define Number Ranges
    Transaction code     SPRO
    12.8     Defining Number Ranges for WM
    SAP menu     Logistics Execution  Warehouse Management  Master Data  Define Number Ranges
    Transaction code     SPRO
    12.9     Warehouse Settings
    12.9.1     Defining Storage Type
    SAP menu     Logistics Execution Warehouse Management  Master Data  Define Storage Type
    Transaction code     SPRO
    12.9.2     Defining Storage Sections
    SAP menu     Logistics Execution  Warehouse Management  Master Data  Define Storage Sections
    Transaction code     SPRO
    12.9.3     Defining Storage Bin Types
    SAP menu     Logistics Execution  Warehouse Management  Master Data  Storage Bins  Define Storage Bin Types
    Transaction code     SPRO
    12.9.4     Defining Storage Type Indicator
    SAP menu     Logistics Execution  Warehouse Management  Master Data  Material  Define Storage Types Indicators
    Transaction code     SPRO
    12.9.5     Defining Storage Unit Types
    SAP menu     Logistics Execution Warehouse Management  Master Data  Material  Define Storage Unit Type
    Transaction code     SPRO
    12.9.6     Defining Storage Section Indicators
    SAP menu     Logistics Execution  Warehouse Management  Master Data  Material  Define Storage Section Indicators
    Transaction code     SPRO
    12.9.7     Assigning Warehouse number to plant/storage location
    SAP menu     Enterprise Structure Assignment  Logistics Execution  Assign Warehouse Number to plant/storage location
    Transaction code     SPRO
    12.9.8     Defining Requirement Types
    SAP menu     Logistics Execution Warehouse Management  Activities  Transfers  Define Requirement Types
    Transaction code     SPRO
    12.9.9     Activate Storage Unit Management per Warehouse Number
    SAP menu     Logistics Execution Warehouse Management  Storage Units  Master Data  Activate Storage Unit Management per Warehouse Number
    Transaction code     SPRO
    Defining control parameters and number ranges f. warehouse no. 
    SAP menu     Logistics Execution  Shipping  Picking  Lean WM  Define control parameters and number ranges f. warehouse no.
    Transaction code     SPRO
    12.11     Defining Difference Indicators
    SAP menu     Logistics Execution  Shipping  Picking  Lean WM  Define Difference Indicators
    Transaction code     SPRO

  • Creation of Transaction code for Reports created in FGI1.

    Hi all,
       We are in ECC 6.0 version. We have created one report for Profit Center Group Wise Receivables with transaction code FGI1. When we executed the report from FGI5 , it was showing the values correctly.
       We created the t.code for the report painter programe and tried to execute. The screen is different from that of T.Code: FGI4.  When we executed , it was not showing any values. I created authorisation for the report and also for the transaction codes.
       Appreciate your suggestion at the earliest.
    Thanks
    Dasa

    Hi
    Check TSTCP table  for the existing t-codes and for creating check this link
    Re: Transaction Code Creation for a Table/View
    Regards
    Pavan

  • Lost the content code for free up gradation of mountain lion. What to do ???

    Lost the content code for free up gradation of mountain lion. What to do ???

    https://discussions.apple.com/thread/4134740
    Thread /w same question

  • Help with code for inserting horizontal scroll bar in photo gallery in Business Catalyst site?

    Hi,
    I am using Business Catalyst and Dreamweaver to create a trial site.
    I am not sure if this is the correct forum to post this request but anyway I have inserted a photo gallery module at the bottom of the sidebar in the homepage of my test site.
    Can anyone advise on whether jquery or any other code can be inserted into the page or module code that will replace the "next" hyperlink below the first 4 photos with a horizontal scroll bar at bottom of the gallery so users can just scroll through all 12 images ?
    Kind Regards, Matt.
    http://craftime-bs6.businesscatalyst.com/

    Alyssa,
    Have you tried putting this rule back as it was originally:
    /* Submenu that is showing with class designation MenuBarSubmenuVisible, we set left to auto so it comes onto the screen below its parent menu item */
    ul.MenuBarHorizontal ul.MenuBarSubmenuVisible
        left: auto; /*was 9px*/
        color: #EF9CCF;
        background-color: #FFF;
    That is, changing your 9px back to auto.
    And giving  us a link (as you did) is much better than printing out the code for us! Thanks!
    Beth

  • Am i the only one who when trying to enter the code for creative cloud activation ?

    I give up,i have been trying to activate a 3 month subscription for CS6 from Staples and every time i try the code it will not work.  I have used the chat live and spent about 3 hours already going nowhere.  I do not like talking on the phone to some help desk overseas and the only thing i think left to do is to return the junk.

    I tried all that and even took a picture of the numbers and blew them up so a blind person could read them and had 3 others read them off.  A simple way to fix the problem is get someone on Adobes staff to find a font that most people can read from whatever product the stick it to.
    John McDonough
    Date: Wed, 1 Aug 2012 18:33:58 -0600
    From: [email protected]
    To: [email protected]
    Subject: Am i the only one who when trying to enter the code for creative cloud activation ?
        Re: Am i the only one who when trying to enter the code for creative cloud activation ?
        created by David__B in Adobe Creative Cloud - View the full discussion
    Hey John,
    Not sure if it helps or not, but I know sometimes with codes like that its really hard to tell certain characters apart, O - like in Oscar versus 0 - number and number 1 versus lowercase L like in Lima.
    Might test entering it both ways if you have any suspect characters?
    -Dave
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4592955#4592955
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4592955#4592955. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Adobe Creative Cloud by email or at Adobe Forums
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • How do I generate redemption code for creative cloud?

    how do I generate redemption code for creative cloud?

    On October 27th 2014, you have purchased two CC (one complete &one photography) under the same Adobe ID. That is the reason you are being asked for a code because under one Adobe ID only one CC can be activated(twice).
    Please contact Adobe Support or you can inbox me privately the CC order number  that you would like to cancel.
    You can also check if the host file has Adobe entry or not as if Adobe entries are there then also CC can ask for serial number. You can check the host by the followinh method.
    Creative cloud do not need a serial number. it will be using your Adobe ID on which you have purchased the creative cloud membership.
    So you need to login with your Adobe ID and password to activate the cloud membership.
    Log out & log back in of the CC Desktop App.
    In case it is not signing in successfully please try the following:
    I don't know which operating system you are working on so i am giving you some steps windows and MAC OS:
       Windows:
       In windows 7 navigate to following location:
         /windows/system32/drivers/etc
       1. look out for "Hosts" file
       2. Open it with notepad
       3. Check if you have any entry for Adobe
       4. Remove the entries and try again launching any product from CC
      Mac:
       1. Please click on "Go" and navigate to /private/etc
       2. Open "hosts" file and check out for any entries for Adobe.com
       3. Remove the entries and save the file
       4.  try again launching any product from CC
      Please refer to Creative Cloud applications ask for serial number
    Hope it helps you.
    Regards
    Rajshree
    Cannot license Illustrator CC after buying subscription

Maybe you are looking for