T430s - Disk-activity and wireless indicator lights not working

Just noticed that the indicator lights on the T430s are not working. There is a wireless and a disk activity light that are not lit up or blinks during activity. Located just left of the T430s sign on the lower half of the laptop cover.

Hello:
That is a new one on me!
Try trashing a couple of preference files and then restarting:
com.apple.dock.plist
com.apple.dock.db
Barry

Similar Messages

Sleep indicator light not working

This isn't really that huge of an issue, but I've noticed that the sleep indicator light on my 366MHz Firewire iBook, which I recently bought on eBay and installed a few upgrades in, seems to not be flashing when the computer is asleep. At first I suspected a bad LED, so I swapped it out with a known-good indicator light from my previous 300MHz iBook. That hasn't seemed to work, and both display cables going into the motherboard appear to be securely attached. Oddly enough, I do recall one time when I put the computer to sleep and the indicator light worked (this was somewhere in the middle of my trying to get it to work), but I haven't been able to replicate it.

Have you tried to reset the Power Management Unit (PMU)?
http://support.apple.com/kb/HT1431?viewlocale=en_US

TS3048 Right click on Mighty Mouse and Wireless Keyboard are not working

I have a 24" iMac, early 2009 Lion,10.7.5. My wireless keyboard and mighty mouse are not working properly. Wireless keyboard- I can turn it on and it will ask me to pair it with the Blue Tooth. I cannot log the numbers in - I even tried logging them in with my wired keyboard device (which is an Apple keyboard).
My Mighty Mouse's right click stopped working as well.
I have gone through all of the troubleshooting steps-
New Batteries - Cleared Blue tooth preferences list, repaired permissions, Cleared cache, Made sure that the settings were correct ex: key was not checked on mouse, Removed both devises (keyboard, and mouse) from blue tooth and allowed them to be discovered again, PRAM reset, Hardware check/ reset, and lastly, Reinstall of OSX.
I am still having the same issue with both devices.
Thank you.

This is why you should always have a wired keyboard and mouse as backups.
Try smc and hope for the best.
I'd also suggest pram reset but you need the keyboard for that.

Status Indicator Light not working

I've been having a recurring issue with the status indicator light on my 15.4-inch MacBook Pro 2.8 GHz (Mid-2009). I learned recently that it's normal for the status indicator light to be on when the computer starts up, shuts down and goes to sleep. Lately, the status indicator light has not appeared at all when the computer starts up, goes to sleep, and shuts down. I've tried almost everything and still nothing has worked
1.) Checked to see if any of the ports are working: FireWire, Ethernet, MagSafe, SD card, USB, Mini-DisplayPort. These ports are behaving as normal, working fine.
2.) Checked and successfully paired a seven button Apple Remote to test the IR receiver.
3.) Ran an Apple Hardware Test, found nothing wrong, passed the test.
4.) Reinstalled and erased my hard drive, still having issues.
5.) Bluetooth, AirPort Extreme, microphone, audio ports, speakers, and iSight are working.
6.) Battery works and the charger is working.
7.) Backlighting for display and keyboard work.
The computer is only 1 year and 4 months old. The issue began occurring two months ago. Now the computer does sleep, but if the fans are going, it takes a bit longer for the computer to go to sleep when I close the lid.
I haven't replaced the hard drive or installed any new hardware.
The battery and power information is still at 100%:
Model Information:
Serial Number: W0945***7VC
Manufacturer: SMP
Device name: bq20z451
Pack Lot Code: 0000
PCB Lot Code: 0000
Firmware Version: 0003
Hardware Revision: 0003
Cell Revision: 0100
Charge Information:
Charge remaining (mAh): 4165
Fully charged:No
Charging: Yes
Full charge capacity (mAh): 6662
Health Information:
Cycle count: 43
Condition: Normal
Battery Installed: Yes
Amperage (mA): 3177
Voltage (mV): 12109
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 15
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 15
Wake On AC Change: No
Wake On Clamshell Open: Yes
Wake On LAN: No
Current Power Source: Yes
Display Sleep Uses Dim: Yes
GPUSwitch: 2
Battery Power:
System Sleep Timer (Minutes): 10
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 2
Wake On AC Change: No
Wake On Clamshell Open: Yes
Display Sleep Uses Dim: Yes
GPUSwitch: 2
Reduce Brightness: Yes
Hardware Configuration:
UPS Installed: No
AC Charger Information:
Connected: Yes
ID: 0x0100
Wattage (W): 85
Revision: 0x0000
Family: 0x00ba
Serial Number: 0x009fe8db
Charging: Yes
My computer's warranty with Apple, including tech support, service, and repair, has expired. However, I do have a remaining two year warranty with Best Buy Geek Squad.
I'm wondering how much would it cost out of pocket to take this computer to an Apple Store for service and repair with a Mac Genius?
So is there anything that could be wrong with this computer and if so, please help!
<Serial Number Edited by Host>

studabaker wrote:
I erased the disk with Disk Utility using the installation DVD ....
If you used "Secure erase", you can be certain that there is nothing left on the disk that is causing your problem.
Because you have a long wait for access to an Apple Authorized Service Provider, if you merely clicked "erase" (the one that does not take more than an hour), you could try Secure Erase now if you want to try the final possible fix you can do on your own.
... and installed the combo update recently, the size for that update was over 1GB.
That is the right one.
I have been regularly doing those permissions. Thanks for the suggestions.
You're welcome.
I'm taking my Mac to Geek Squad and Mac Genius next month when I visit my dad in Georgia, there's an Apple Store about 45 minutes away from his house and a Best Buy that sells Macs, cause it turns out Geek Squad's coverage for Apple/Mac is only in places where they sell Macs. I used my zip code and turned up 0 results but I typed the zip code for where my dad lives in North Georgia, and a Best Buy in Atlanta is available. So I will definitely go there and visit the Apple Store to at least see what my options are.
If you need help from Apple before you can go to a physical location next month, other Apple Technical Support service option contacts are available here:
http://www.apple.com/contact/
Best Buy by far has the best warranty for computers from what the sales associate was telling me. Apparently, Best Buy warranty covers spills, drops & breaks, and overall maintenance issues. In fact, they told me if the computer can't be fixed, they'll replace it with a new one.
It should surprise nobody when salesmen tell customers that their own warranty product is best. Because you have apparently already paid for the Best Buy warranty, you can take advantage of their warranty and enjoy the "best" results if you can find a location that honors it.
Thanks for advice and if there's anything else you can think of, let me know.
You're welcome. You have all my suggestions. However, if I think of anything else, I will post back here.
We will watch for your status update. Please let us know what fix works for you.
EZ Jim
Mac Pro Quad Core (Early 2009) 2.93Ghz Mac OS X (10.6.7); MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.7)
LED Cinema Display; G4 PowerBook 1.67GHz (10.4.11); iBookSE 366MHz (10.3.9); External iSight; iPod4touch4.3.1

Toshiba Satellite A505-S6033 Indicator Lights Not Working

I have a Toshiba Satellite A505-S6033 that all of a sudden does not have its ac power and batter power indicator lights working. The power and hard drive activity lights do however work. The laptop works fine on both AC and battery power as well as the battery recharges no problem. I tried the cord and pack from my other Toshiba laptop and still no lights. I also changed out the charge cable with a new one after this assuming a short in the cable. Still no lights, however everything works. Please help as I am at a loss why only these 2 indicator lights out of the whole strip do not illuminate as well as the laptop still works fine. Thanks in advance for any help you can provide me.

leds burn out too. you could replace or just use as-is. they really aren't necessary anyway.
L305-S5955, T9300 Intel Core 2 Duo, 4GB RAM, 60GB SSD, Win 7 Ultimate 64-bit

Blue indicator lights not working properly

Hi
I've just doen the SMC updated to enable Power Nap on my 13" Macbook Air running ML. It seemed to work OK except that the blue indicator lights in the dock aren't working properly. Instead of showing blue lights it now shows little white rectangles. Seems to function the same, it's more of a graphical glitch it seems - but an annoying one. Any ideas please? I am a complete Mac noob I'm afraid.. first ever Mac...
Thanks.

Try doing a Dock restart using the following Terminal command:
killall Dock
Log out/in and test. If that doesn't work.
You need to look in your user Library/Applications Support/Dock for the .db. Hold down the option key while using the Finder “Go To Folder” command. Enter ~/ Library/Applications Support/Dock. Move the .db to your desktop.
If you prefer to make your user library permanently visible, use the Terminal command found below.
http://osxdaily.com/2011/07/04/show-library-directory-in-mac-os-x-lion/
You might want to bookmark the command. I had to use it again after I installed 10.8.4. I have also been informed that if you drag the user library to Finder it will remain visible.
Then try a dock reset.
Applications/Utilities/Terminal enter the command
killall Dock
Log out/in test. If it works okay, delete the .db from the desktop.
If the Dock is the same, return the .db to where you got them from, overwriting the newer ones.

T430s fan noise and fan speed monitor not working?

Hi, I just bought this T430s from the outlet store. I noticed a rather loud fan noise and found out s lot of compalints about the T430 model. I guess the problem I have is not as severe as those T430 users (e.g. the noise may not be as loud), but I still want to monitor the fan speed. Here's my problem:
1. none of the third party software can show fan speed, they can only show the cpu temperature, such as speedfan and aida64.
2. I tried to download the fanspeedcontrol driver from lenovo, but after installing it, the task manager does not show that the fanspeedcontrol exe. is working.
I do not want to change the fan speed, but just want to monitor the speed so that I can have a better understanding of whats going on. Does anyone have the similar problem?
Thanks.

Hi Alan, (I know this conversation was from several months back),
I don't know the answer to your questions. It seems that your fan is operational, as far as its most basic functional requirement.
I don't have experience with any particular software programs or widgets that indicate fan speed, sorry.
Do you have any view, through software, of the CPU (and GPU?) sensed temperature? Those would be very good data to observe.
If it were either disconnected or non-functional, I assume that your computer would report a POST error right after power-on (and self test).
But I just wanted to suggest here that in an unfortunate possible scenario, consider if the thermal grease on the heat sink(s) was inadequate (or was missing), then the fan would be running higher than normal (probably always spinning at a high rate), and it won't be taking enough heat away from the processor(s), i.e. inadequate cooling.
Which could be corrected by a technician (or DIY). This is pure speculation, it is not a definite, at all.
Larry

BBM and wireless Internet still not working. Help?

So ever since I updated my phone to the new 6.0 software version, my BBM and my wireless internet won't work. I've tried taking the battery out, restarting the phone, excetra, but nothing is working. I only got it about a month ago, so I'm extremly confused as to why it has stopped working. Can anyone help me?

Hi and Welcome to the Community!!
I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2 each should result in a message coming to your BB...please wait for that before proceeding to the next step):
1) Register HRT
KB00510 How to register a BlackBerry smartphone with the wireless network
2) Delete and Resend Service Books
KB05000Delete the service book for the BlackBerry Internet Service email account from the BlackBerry smartphone
KB02830 Send the service books for the BlackBerry Internet Service
3) Batt Pull Reboot
Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Hopefully that will get things going again for you! If not, then you should contact your mobile service provider for formal support.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

New MBP logic board and wireless internet does not work anymore

hi there
i had to change the logic board in my only 2 years old MBP15". i purchased a new one and put it in by myself (relatively easy task). i still use the same internal HD as this one still works fine, so all data are the same.
however, the new logic board has obviously a different "identity" from my old one, it came with a sticker which says "ethernet ID 001FF3513E7A" which is different from before. this may be the reason i can still access my wireless network at home, but the self assigned IP address prevents me from connecting to the internet. all settings are as before and it worked always without a problem.
all settings were "automatic" before (using DHCP), and i use exactly the same settings again, but no success. i have to add that i use a new mac mini in the same network with absolutely identical settings (automatic) and this one receives a free IP address from the router (which is only in the last number different from the router's), but the MBP shows a totally different IP address.
i could finally fix it switching to "manual" and adding the same IP address the mini is using and just changed the last number, which has to be different from the time capsule i use as wireless device and the mini. like this everything works just fine.
but why does the mac mini perform everything automatic and the MBP (even with the new ethernet ID - and especially since i connect wireless and not using ethernet) is not able to do so?
i worry if i want to use the internet in any wifi hot spot i may run into troubles...
any idea what the difference between these two machines (with identical settings) is?
thanks and cheers
george

Thank you. It didn't work unfortunately :((
Here are my router's details (Huawei):
Product name HG655b
Device ID 00E0FC-21530307237S0B028701
Hardware version VER.C
Firmware version V100R001C02B018
Batch number RWC3P0.010.29066
Physical address 5C:4C:A9:A5:41:B0
System up time 0 days 0 hours 15 minutes 56 seconds
I don't have Mac filtering enabled.
Now it doesn't even find the wireless network anymore...
My computer and itouch are connected to WAP, but the iphone could not connect to WAP, but only WEP.
Any other ideas?
Thanks a lot!

Sleep indicator light not working after upgrading to Snow Leopard

Hello all, I recently upgraded to Snow Leopard on my mid-2007 Macbook Pro (Macbook Pro 3,1, 2.4Ghz Core 2 Duo, 4GB RAM) and after the upgrade the sleep light no longer comes on when I shut the lid or when the display is powered off.
Not a huge deal, but might be an issue if I can't remember if I shut the computer down or put it to sleep last—I did not do a clean install, but would anyone happen to know something I could try before resorting to that?
Thanks, your help is much appreciated!

Have you tried Resetting the System Management Controller (SMC)?
cornelius

Battery Indicator Lights Not Working

When I push the button on the side of my macbook pro, the 8 little lights do not light up. Is there a way I may have accidentally turned then off? Is there anything I can do to make them work? Thanks for the help.

If you have Applecare warranty take it in for a check. If faulty it will be repaired at no cost.
Neville

I have a Linksys WRV200 wireless router and the wireless signal is not working properly so I cannot connect to the internet wirelessly. the wireless light has a fast green blinking light. how can I fix the router?

I have a Linksys WRV200 wireless router and the wireless signal is not working properly so I am unable to connect to the internet wirelessly. The wireless light is blinking green very quickly and I connect and disconnect from the network constantly. How do I get the router to work properly

Hello James,
The flashing WLAN light means activity (data getting transferred). Try disconnecting all your devices and check whether the light is still flashing or disconnect the router from internet and do the check.
Do you have your SSID as linksys or the default one? If your neighbor has the same SSID, then traffic could result from your neighbor's one. Try changing your SSID and password. Make your security WPA/WPA2.
Hope this helps,
Thanks
Vijay

TS3048 my wireless mouse is not working at all. I have changed the batteries and still nothing, not even a flashing green light. I am using someone else's computer to ask these questions as I now can't use mine. Help!!!

my wireless mouse is not working at all. I have changed the batteries and still nothing, not even a flashing green light. I am using someone else's computer to ask these questions as I now can't use mine. Help!!!

I just had the same problem. And I found the solution, on Youtube.
The problem is that these ******** at apple designed the battery compartement, the distance between metal contacts too big.
That means the batteries plus or minus poles are not touching the corresponding contacts in the mouses battery compartement.
Most likely the battery doesn't get pushed up to touch the plus contacts.
I used a fingernail to push the battery up and tadaa, the green LED came on.
The guy in the Youtube video just put some folded aluminium foil under the minus poles for bridging the gap.
See here, "How to fix the Apple Magic Mouse!":
https://www.youtube.com/watch?v=7vlDEVfV45s
Hope this helps.
<Edited by Host>

The wireless keyboard is not working with my iPad2. I turned on Bluetooth and paired it. What else is there to do?

The wireless keyboard is not working with my iPad2. I turned on bluetooth and paired the device. What other hidden step is there to do?

Well, the tiny green light comes on and blinks. . . After a frustrating time, I turned everything off. Later, when I tried the keyboard again, it worked. I guess the bluetooth process takes longer than expected. So thank you for taking the time to help a technically impaired person!!

Windows - Excessive Disk Activity and "ccmexec.exe"

ccmexec.exe is constantly rummaging through my hard drives, apparently looking for something.
It does not seem to be producing any kind of output file (at least none that I can find).
I have created a batch file to turn off the SMS service, and kill ccmexec.exe, however this is not the best solution.
Since the SMS service allows corporate to keep my computer updated, I do not wish to turn it off permanently.
Is there a way to find out more details on what the ccmexec.exe is looking for?
And what it does with the information it finds?
Note: I already posted this on the regular forums, however the response suggested I re-post it to this one:
The question is also better suited for the audience on TechNet. Please post your question in the following link for better assistance:
http://social.technet.microsoft.com/Forums/en-us/sms/threads
Original Posting:
http://answers.microsoft.com/en-us/windows/forum/windows_xp-performance/windows-excessive-disk-activity-and-ccmexecexe/6a5904bd-8c5c-4c97-b589-4a370889c19f

We have the same problem with software inventory at my site. The scheduled scan trashes my hard disk and brings my computer to a crawl every MWF morning. You can check if software inventory is enabled by going to 'Control Panel -> Configuration
Manager'. Then, select the 'Components' tab and look for the status of 'Software Inventory Agent'. If software inventory is enabled for your client, you probably do not have access to disable it. However, you can configure software inventory
to skip your hard drive by following instructions at https://technet.microsoft.com/en-us/library/bb632671.aspx
Note that having the Software Inventory Agent enabled does not definitively mean your computer will be scanned for software. Your IT shop must also instruct your client when and how to perform the scan. However, your IT department probably has
it enabled for a reason and it is likely to be part of the problem.
Additionally, following the technet instructions will likely put your computer out of compliance with IT's standards. You should only follow them if you are desperate and not worried about getting in trouble.

T430s - Disk-activity and wireless indicator lights not working

Similar Messages

Maybe you are looking for