Tab displayed twice in MIGO screen when created by a BADI
Hello all
i have created a tab in MIGO transaction using the BADI MB_MIGO_BADI n the method PBO_DETAIL. but the tab is displayed twice . In debugging i saw the badi is being called twice. But i 'm not understanding why the badi is called twice .
can anybody give me reason on why the tab is displayed twice..
thanks in advance
pavan
Hi,
I have not used this BADI before.
Edit: See the sample code in method "PBO_DETAIL".
data: ls_extdata type migo_badi_example_screen_field.
* This check is obligatory, otherwise the program flow is incorrect
* (If there would be more than one implementation of BAdI MB_MIGO_BADI,
* only one subscreen would be displayed).
check i_class_id = gf_class_id.
Have you added this code in your implementation?
Regards
Vinod
Edited by: Vinod Kumar on Aug 13, 2010 4:32 PM
Similar Messages
-
Excise Tab not appearing in MIGO Screen
Excise Tab not appearing in MIGO Screen
Reg
SunilHi,
For GR, which movement type you are using...?
If it is 103, you will get the excise invoice tab only in 105 GR.
If it is 101 only, check the following configuration.
SPRO-Logistics General-Tax on goods movements-India-Business Transactions-Incoming Excise invoices-Specify which movement type involve excise invoices.
Please revert for further analysis.
Regards,
Siva -
When using Adobe Photoshop Elements, is it legal to use shapes etc. (displayed in 'Artwork and Effects') when creating a product to be sold? Thank you.
Thank you very much for answering my question. Have a great day.
-
Excise Tab not appearing in MIGO Screen but getting posted with EI Entry
Hi ,
I am excuting CIN ......While doing MIGO, Excise tab is not apearing nowhere in the MIGO screen but entries are being created successfuly in MIRO and posted as well, Entries ....
GR/IR Clearing A/c Dr
RG 23 BED A/c Dr
RG 23 Ecess A/c Dr
RG 23 SHEcess A/c Dr
Vendor A/c Cr
Can any one help me and provide solution for this.
Thanks
SukantHI,
Check your excise group settings, in it check migo settings.
You need to mark tick in all boxes
EI capture
Post EI in MIGO
Duty differenc at GR
EI create/RG23D selection
Update RG1at MIGO
Also check in J1ID trax for the Po material chapter id is maintained.
Regards
KK -
Display name not getting generated When creating user thorugh GTC
We are using GTC flat file as a trusted source. We see that display name not getting generated. And same thing happening when creating a new GTC mapping.
previously when we ran with few test user got created with display name through GTC flat file , Suddenly we see this issue display name not getting generated through flat file recon.
Manually user creation has no issues.
Please let me know if you have any idea about this issue.Don't use GTC... GTC is inflexible and buggy technology... Nothing guaranteed... Rather create your own custom trusted recon code...
For more details
26 Known Issues of Generic Technology Connectors
http://docs.oracle.com/cd/E10391_01/doc.910/e10360/issues.htm -
Display the records in forms when creating in a database
hi to all
i have a problem in forms, run in c\s using form6i..
How can i display the records when i create a records to database and automatically display in forms when i open the forms or when creating a records?
example:
in form#1 , this is where i create records, i create records =A it will insert in database .when i update record A. I change A to B..then form#2 will also change to B and appear or dispaly in forms.
in form#2, this has also a text item, when i open this form, it will appear the A records here, it will also update....
what should be the best trigger to used and how to do this? plzzz help
tnx in advance
micaHow can i display the records when i create a records
to database and automatically display in forms when i
open the forms or when creating a records?
example:
in form#1 , this is where i create records, i create
records =A it will insert in database .when i update
record A. I change A to B..then form#2 will also
change to B and appear or dispaly in forms.Yours question is not clear to me , you didnt mention forms A and B contain the same underlying table or both have diffrent underlying table.
My assumption both have diffrent table if its the case then use MERGE DML (introduced within 9i) and get refreshed it by TIMER (execute_query) within forms B.
You need to clarify more what you wana achieve.
Khurram -
Display not working, external display does, but blue screen when windows loads
Hi folks, wondering if anyone can help.
My DV6's display is no longer working. An external VGA display works, but when it gets to the "welcome" screen as it loads into windows, I get a blue screen. I was able to load into safe mode previously, but I foolishly reformatted and reinstalled windows thinking it might solve the problem. Now I can't even get into safe mode because it won't allow a first time setup of Windows in safe mode.
I suspect this may be the death of my loyal notebook, but was hoping someone could propose a solution.
Thanks!HI @Mikep037,
Thank you for your query, I am happy to assist you!
I understand that you are having an issue with your display.
You have reformatted and reinstalled Windows but are unable to complete the setup.
Did you do a recovery or did you reinstall Windows from a retail disk?
First I would try a hard reset. HP Notebook PCs - Use Hard Reset to Resolve Hardware and Software Issues. Please be sure to remove any CD/DVD from tray and disconnect all externals devices or USB's.
HP Notebook PCs - Overview of How to Troubleshoot Problems When a Computer Does Not Start Up or Boot...
Here links to aid with the recovery process.
HP PCs - Performing an HP system recovery (Windows 7)
HP Notebook PCs - System Recovery May Fail or Display Error Message (Windows 7, or Vista)
Best of Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping! -
Robohelp displays twice in IE 9 when used in an iFrame
I am building an application for a client who needs to be able to control access to their Robohelp content. I am doing this by displaying the Robohelp content inside of an iframe in another page (ASP.NET). The problem is the entire Robohelp frameset appears twice. The first time it is all stylized right and the second time, it looks like some of the styles didn't apply. It is really wierd and very frustrating. It doesn't do this in Firefox or Chrome -- just IE. Anybody have any idea how to fix this?
ThanksCan we take it that the help opens correctly if run standalone and the issue is only when the developers but it in an iFrame?
If so, then it's an issue with their work. I don't mean that in an unhelpful way, it's simply it's an issue outside of what we can help with in these forums, unless someone with a developer background is looking in.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge -
Frozen Screen When Creating a Shared Review
I am trying to create a shared review through a network folder, however, it freezes with the following message box: "Status: Creating shared folder location...". This is the first time this has happened, as I have been able to create a shared review many times before using the same network folder. Can anybody help me with this issue? Thanks in advance.
I am trying to create a shared review from an Adobe 9 pdf, however, it freezes with the following message box: "Status: Creating shared folder on acrobat.com". This is the first time I have tried using Acrobat.com to share and collaborate on documents. When I click "next" from the initial Shared Review screen my understanding is that I should be prompted for my username and password for Acrobat.com but I do not get that prompt. "Authenticating Adobe ID..." and "Communicating with Acrobat.com..." messages flash on the scren and then the Shared Review dailog screen that asks for "Delivery Method, To: CC:, etc." comes up. I fill in the fields and then it attempts to connect but never makes the connection and returns the above message and I hit the retry button but it never completes. Can anybody help me with this issue? Thanks in advance.
-
Display Service Request Detail screen when saving a Service Request
I have created a weblink that creates a new service request with the Contact field already populated.
Is it possible to stop the application from returning to the contact detail page when I save the Service Request. Ideally I would like to display the service request detail page when I save a service request.
Thanks.The first button option is useful if the table to maintain is a "Customizing" type, and you need to transport easily its values. If the table is of type "Master Data" or even "Transactional data" then the data has not to be copied between environments.
Sample :
T001 - Customizing => Transport requests
MAR - Master Data => No transport
I think that your table as no client "MANDT" fields, so the program asked for a "workbench" request and not a "Customizing" one.
Regards -
Right now when someone calls that I have a contact pic set for, it shows as a thumbnail on the right side of the banner (right corner of screen). I want it to come up on the whole screen like I see other iphones do. I was told at first that this happens when I use a pic not taken with my phone, such as an uploaded pic from my pc. This is not the case, the only 2 that I have tried to do were pics taken with the iphone. Can someone help me to get this corrected? I have spent over 2 hours with verizon, they cannot figure it out and I also have a senior technical advisor at Apple trying to figure it out, but I am curious if anyone has come across this with the new 4S and how they fixed it. The senior apple advisor thinks it has something to do with syncing my contacts through itunes or google.
russellfromblackburn south wrote:
Is it because the portable drive is NTFS format and the Mac wont recognise this? If so what do I do?
Yes, this is exactly what is causing the problem. Macs cannot write to NTFS formatted drives, only read. You must move the documents to the internal HDD/SSD of the Mac to be able to edit them.
Or, since you say you don't want to move the documents to the internal storage, you'll need to format the external HDD as FAT32. -
Create screen when creating OOP ALV
hi everybody
I have created an OOP ALV but I dont know how to attach it to a screen, i know its tcode se51, but i dnt know how to link it to the ALV
can anybody help me?Hello,
I think first you have to check some standard sap program :
BCALV_EDIT_01 Switch on and off the ready-for-input status of the entire grid
BCALV_EDIT_02 Define ready-for-input status at cell level
BCALV_EDIT_03 Verification of modified cells
BCALV_EDIT_04 Delete and append rows
BCALV_EDIT_05 Checkboxes
BCALV_EDIT_06 Dropdown Listbox at Column Level
BCALV_EDIT_07 Dropdown Listbox at Cell Level
BCALV_EDIT_08 Integrate Non-Standard F4 Help
there simple process like you have to add a container on a screen
and in report program
create an instance
data g_container TYPE scrfname VALUE 'ZGW_CONTAINER',
grid1 TYPE REF TO cl_gui_alv_grid.
where zgw_container is conatiner name which is asing to screen
then call the method set_table_for_first_display of class cl_gui_alv_grid .
pass the require parameter to that method.
CALL METHOD GRID1->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING
* I_BUFFER_ACTIVE =
* I_BYPASSING_BUFFER =
* I_CONSISTENCY_CHECK =
* I_STRUCTURE_NAME = 'ZGW3RE007'
IS_VARIANT = GS_VARIANT
I_SAVE = 'A'
* I_DEFAULT = 'X'
IS_LAYOUT = GS_LAYOUT
* IS_PRINT =
* IT_SPECIAL_GROUPS =
IT_TOOLBAR_EXCLUDING = lt_exclude
* IT_HYPERLINK =
* IT_ALV_GRAPHICS =
* IT_EXCEPT_QINFO =
* IR_SALV_ADAPTER =
CHANGING
IT_OUTTAB = GT_OUTTAB[]
IT_FIELDCATALOG = WA1_FIELDCATALOG
* IT_SORT =
* IT_FILTER =
* EXCEPTIONS
* INVALID_PARAMETER_COMBINATION = 1
* PROGRAM_ERROR = 2
* TOO_MANY_LINES = 3
* others = 4
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
or read this pdf document.
http://www.sap-partner.hu/ABAP_HELP_INFO/An%20Easy%20Reference%20for%20ALV%20Grid%20Control.pdf
Thanks
Anirudh Saini -
How to fix airplay to my apple tv. Home airplay is "on" on the apple tv and the computer. Movie plays on the macbook air but when airplay is activated a checkboard screen covers the computer and tv. They are on the same wi-fi. Blue tooth on the computer is off.
You have mirroring enabled. If you are trying to play iTunes content just use home sharing or airplay.
-
Customs Duty should display in When Creating MIRO- Thro Delivery Note Mode
Dear All
I had a doubt how to configure for the display of the customs duty when creating MIRO doucments- when the mode of documents is Delivery Note.
Please help me
Thanks
With Regards
RameshI replied in MM forum so check that one
-
Copy displays in blue on screen
I am using Adobe Acrobat Professional 8. All my copy (all text) displays in blue on screen, when it's supposed to be black. When I send to printer however it prints correctly in black. Is there a reason whey this is happenening and is there a way to fix this problem? I have tried opening different pdfs from multiple sources so it's not just one pdf file that is doing this. This is happening to all the pdfs not just the one that I have created. When I open on a different computer or if I open the file in Acrobat Reader, copy is displayed in black like it should be. I am on a MAC running 10.6.8. Thx!
See if "Replace document colour" is selected under Accessibility Preferences.
Maybe you are looking for
-
I just ordered a macbook mc207ll/a online that is running Sow leopard, will I be able to upgrade to yosemite?
-
How do you set up multiple time capsules in my home?
I have one time capsule for my information and my roommate has another. They are in the same room. How do I set them up so our information doesn't get confused?
-
How can I get the POST data out of a quiz?
Trying to get data out of a quiz with PHP or ASP. How? Do I have to set up the Quiz Output to something in particular? I want to get the $_POST['correct'] information out --or Request.Form("correct"). How do I do it?
-
Using interfaces to alleviate supplier plan visibilityproblems
At FORUM97, someone from Born presented a paper on how to use interfaces to get around problems with supplier plan setups that restrict visibility. Does anyone have this presentation or can offer any pointers? -martin To unsubscribe, email '[email pr
-
I cant log into my linksys network
I have a PowerBook G4 with an installed AirPort card but, when i try to log into my Liknsys wireles network, it says the passowrd is incorrect... though i know its correct because my sister can log in to the same network via her mac powerbook please