Table parameter Types for this Function module
I am using K_HIERARCHY_TABLES_READ to get the profit centers for a given profit center group.
I have the following declarations for the parameters of this FM:
TYPE-POOLS: gseth.
Declarations for Profit Center Group
DATA: g_pcgrp TYPE rgsbs-class,
g_setid TYPE rgsbs-setnr,
g_info TYPE grphinfo,
g_overwrite TYPE sy-datar.
DATA:
i_nodes TYPE STANDARD TABLE OF gseth_node_tab,
i_values TYPE STANDARD TABLE OF gseth_val_tab,
i_masterdata TYPE STANDARD TABLE OF grpmdline.
When this is run, its taking me into a dump and it says:
The reason for the exception is:
The system tried to pass internal table "I_NODES" to the formal
parameter "T_NODES", but a type conflict occurred between the
formal and the actual parameter.
Pl help me to correct this dump and error.
Thanks
Kiran
DATA:
i_nodes TYPE STANDARD TABLE OF gseth_node_tab,
i_values TYPE STANDARD TABLE OF gseth_val_tab,
i_masterdata TYPE STANDARD TABLE OF grpmdline.
change your declarations
to the below...
DATA:
i_nodes TYPE gseth_node_tab,
i_values TYPE gseth_val_tab,
i_masterdata TYPE STANDARD TABLE OF grpmdline.
Similar Messages
-
Hi Friends
I am having performance issue for this function-module(HR_TIM_REPORT_ABSENCE_DATA) and one my client got over 8 thousend employees . This function-module taking forever to read the data. is there any other function-module to read the absences data IT2001 .
I did use like this .if i take out this F.M 'HR_TIM_REPORT_ABSENCE_DATA_INI' its not working other Function-module.please Suggest me .
call function 'HR_TIM_REPORT_ABSENCE_DATA_INI'
exporting "Publishing to global memory
option_string = option_s "string of sel org fields
trig_string = trig_s "string of req data
alemp_flag = sw_alemp "all employee req
infot_flag = space "split per IT neccessary
sel_modus = sw_apa
importing
org_num = fdpos_lines "number of sel org fields
tables
fieldtab = fdtab "all org fields
field_sel = fieldnametab_m. "sel org fields
To Read all infotypes from Absences type.
RP_READ_ALL_TIME_ITY PN-BEGDA PN-ENDDA.
central function unit to provide internal tables: abse orgs empl
call function 'HR_TIM_REPORT_ABSENCE_DATA'
exporting
pernr = pernr-pernr
begda = pn-begda
endda = pn-endda
IMPORTING
SUBRC = SUBRC_RTA
tables
absences = absences_01
org_fields = orgs
emp_fields = empl
REFTAB =
APLTAB =
awart_sel_p = awart_s[]
awart_sel_a = awart_s[]
abstp_sel = abstp_s[]
i0000 = p0000
i0001 = p0001
i0002 = p0002
i0007 = p0007
i2001 = p2001
i2002 = p2002
i2003 = p2003.
Thanks & Regards
Reddyguessing will not help you much, check with SE30 to get a better insight
SE30
The ABAP Runtime Trace (SE30) - Quick and Easy
what is the total time, what are the Top 10 in the hitlist.
Siegfried -
Table with type ANY in function module
Hi all
I want to use a function module in different programs. I want to pass always a table and in a string the name of the structure, so that I can access the data with ASSIGN and the passed structure name.
For a structure I can use the type ANY, but if I want to use a table in a function module, I need to define a table type.
Is there a way to define a tabletype with the type ANY? A Workaround would be fine too.
Thanks and best regards!
ChristianHi Christian,
ANY TABLE is used to type a parameter, or field symbol, that can be a table of any type or structure.
ANY is used to type a parameter, or field symbol, that can be any type. You can't, however, use any table operations on a parameter/field-symbol typed as ANY. For that, you have to use ANY TABLE.
The same applies to ANY. You can pass to the method a data object, without specifying its type (i.e, in dynamic programs).
Suppose that I need to split a line into a table, but I don't know the structure of this line:
I have a method:
codeMETHOD split_line_in_table IMPORTING im_line TYPE ANY
EXPORTING ex_table TYPE ANY TABLE.
[/code]
codeMETHOD split_line_in_table.
SPLIT im_line AT separator INTO TABLE ex_table.
ENDMETHOD.[/code]
Now, i can pass this method a line of ANY structure and get a table without specifying its structure.
cheers,
Hema. -
Replacement for a function module in 6.0
Hi
I am in the process of upgrading from 4.7 to 6.0 . The function module SAPWL_STATREC_READ_FILE is flagged as obsolete . Am unable to find a documentation for this function module . So which is the replacement for this function module . ?
Please help . .hi,
the replacement is SAPWL_STATREC_DIRECT_READ
next time check the source code of the FM, probably you'll find the answer...
hope this helps
ec -
Syntax Error with Table Parameter (type: ANY) when Creating Function Module
Hello experts,
I want to create a function module with a table parameter and table type is ANY. But when I check (Ctrl+F7) this function module, syntax error occurs - "In this statement, the internal table "MSG_TABLE_ITEM" must have the type "STANDARD TABLE"."
Could anyone tell me what the wrong is? And how can I fix it?
Thanks,
ShelwinHi,
For table parameters, you can only pass
MSG_TABLE_ITM TYPE STANDARD TABLE
or
MSG_TABLE_ITM ( don't fill other columns TYPING ASSOCIATED TYPE ).
For reference check FM 'GUI_UPLOAD' - Table parameters
Regards,
DPM -
Hi All,
i created one enchancement to ME21n screen,
i added one screen at header
When i running the the transaction ME41 it shows the following error.
This function not defined
Message no. 06006
Diagnosis
There is no entry for this function in Table 168F (system table). An error involving the screen control has probably occurred.
Procedure
Contact your system administrator.
Am i need to add this functionalty to any sap table.
plz guide me on this.Hi Krishna
Have you added any buttons in the custom screen if yes then you will have to maintain configuration data for Function code processing.
Please search on SCN for the same
Nabheet -
What is this function module used for? -QKRT_MEAN_VALUE_SHEWHART
What is this function module used for? What does a K-factor mean?
What is this function module used for? What does a K-factor mean?
-
Abap object as export parameter for remote function module
Hello all,
I would like to know if there is any possibility to use an abap object as parameter within a remote function module.
Thanks in advanceNo. You can't pass the Object Reference as the Parameters of the FM which could be run as an independent object like RFC FM, Update Task FM.
If you have an object and you want to pass the data to the subsequent FM (RFC), you need to move the attributes to structures or variables before calling the FM and use these variables to pass the data to your RFC.
Regards,
Naimesh Patel -
Accessing internal table of main program inside function module...
I have function module say ZFUNC and main program say ZMAIN and internal table defined as IT_TAB inside ZMAIN but not passed as parameter to Function module ZFUNC.
If I want to access the field value of IT_TAB of main program ZMAIN inside ZFUNC during debugging then, I simply put <b>(ZMAIN)IT_TAB-amount</b> in ABAP debugger and then change it when the debugger is inside ZFUNC.
How can I write code to change the value of internal table of main program in function module ZFUNC instead of doing in debugger ? I guess I have to use some field symbols, but not sure. Please suggest.
Regards,
Rajesh.Yes, you do need to use a field symbol. Say for example, you had a internal table called IMARC in your program and you want to access it later in a funciton module, you would do something like this.
data: xmarc type marc.
field-symbols: <imarc> type marc_upl_tt.
* Assign an internal table
field = '(ZPROGRAM_NAME)IMARC[]'.
assign (field) to <imarc>.
loop at <imarc> into xmarc.
write: / xmarc-matnr, xmarc-werks.
endloop.
Regards,
Rich Heilman -
New in NW04s: FL069 TABLES parameters are obsolete (in function modules)
Can somebody explain what is the fundamental reason for this behaviour in NW04s?
In Netweaver 2004s system (like ERP2005 ) you get a warning message in SE37:
FL069 TABLES parameters are obsolete! when defining quite ordinary tables parameter using LIKE and reference to a structure in ddic.
I now speak normal function modules, not RFC enabled.
This example of tables parameter definition will cause the warning message:
return LIKE BAPIRET2
I of course looked the additional help provided by this message FL069. I understood it as following:
you should stop using TABLES parameter and more often use CHANGING parameter by referring a TABLE TYPE defined in dictionary.
if using CHANGING parameter and still want to pass the header line of your internal table you should use a separate parameter (EXPORT or CHANGING parameter)
Developers have too much used TABLES parameters for passing internal tables for reading (by value) rather than to be modified (by reference). As a consequence, fm could have change the header line without caller to know it.
in my opinion the message help is missleadingly telling that header line is no longer passed to function module if TABLES parameter is used. I made a small test program and fm (with TABLES paramerer), and everything worked as before.
The warning message can be ignored by pressing Enter a few times and your fm with TABLES parameter works as it had in older versions of Netweaver.
SAP is still using a lot of TABLES parameters in their own function modules. For example SD_SALES_HEADER_MAINTAIN.
So what is the point of this warning message while everything still works as it used to be and SAP uses this same "OBSOLETE" feature itself? Is there anything more fundamental behind this message? Like TABLES paremeters will no longer work in future versions of ABAP (or header line passing will be ignored in future versions) and therefore developers should switch to CHANGING/EXPORT parameters with TABLE TYPES as soon as possible??
Please understand that I don't need any assistance how to avoid this message, just interested to share your opinions what is the purpose of this warning message.
That is why I did not marked this thread as a question.
Br: KimmoHello,
This is the view under Tables tab in my function builder:
I_T_SELECT TYPE SRSC_S_IF_SIMPLE-T_SELECT
I_T_FIELDS TYPE SRSC_S_IF_SIMPLE-T_FIELDS
E_T_DATA LIKE SFLIGHT (which I change to YBWxxxx)
The moment I change to YBWxxxxx it gives me that error '"TABLES parameters are obsolete! "'
and unfortunately hitting enter several times is not helping either
Thanks! -
How to Send Internal table to SAP Spool using Function Modules or Methods?
Hi Experts,
How to Send Internal table to SAP Spool using Function Modules or Methods?
Thanks ,
KiranThis is my code.
I still get the no ABAP list data for the spool, even tho I can see it sp01?
REPORT Z_MAIL_PAYSLIP.
* Declaration Part *
tables: PERNR, PV000, T549Q, V_T514D, HRPY_RGDIR.
infotypes: 0000, 0001, 0105, 0655.
data: begin of ITAB occurs 0,
MTEXT(25) type C,
PERNR like PA0001-PERNR,
ABKRS like PA0001-ABKRS,
ENAME like PA0001-ENAME,
USRID_LONG like PA0105-USRID_LONG,
end of ITAB.
data: W_BEGDA like HRPY_RGDIR-FPBEG,
W_ENDDA like HRPY_RGDIR-FPEND.
data: RETURN like BAPIRETURN1 occurs 0 with header line.
data: P_INFO like PC407,
P_FORM like PC408 occurs 0 with header line.
data: P_IDX type I,
MY_MONTH type T549Q-PABRP,
STR_MY_MONTH(2) type C,
MY_YEAR type T549Q-PABRJ,
STR_MY_YEAR(4) type C,
CRLF(2) type x value '0D0A'.
data: W_CMONTH(10) type C.
data: TAB_LINES type I,
ATT_TYPE like SOODK-OBJTP.
data: begin of P_INDEX occurs 0,
INDEX type I,
end of P_INDEX.
constants: begin of F__LTYPE, "type of line
CMD like PC408-LTYPE value '/:', "command
TXT like PC408-LTYPE value 's', "textline
end of F__LTYPE.
constants: begin of F__CMD, "commands
NEWPAGE like PC408-LINDA value '',
end of F__CMD.
data: P_LIST like ABAPLIST occurs 1 with header line.
*data: OBJBIN like SOLISTI1 occurs 10 with header line,
data: OBJBIN like LVC_S_1022 occurs 10 with header line,
DOCDATA like SODOCCHGI1,
OBJTXT like SOLISTI1 occurs 10 with header line,
OBJPACK like SOPCKLSTI1 occurs 1 with header line,
RECLIST like SOMLRECI1 occurs 1 with header line,
OBJHEAD like SOLISTI1 occurs 1 with header line,
it_mess_att LIKE solisti1 OCCURS 0 WITH HEADER LINE,
gd_buffer type string,
l_no_of_bytes TYPE i,
l_pdf_spoolid LIKE tsp01-rqident,
l_jobname LIKE tbtcjob-jobname.
data: file_length type int4,
spool_id type rspoid,
line_cnt type i.
*-------------------------------------------------------------------* * INITIALIZATION *
OBJBIN = ' | '.
append OBJBIN.
OBJPACK-HEAD_START = 1.
data: S_ABKRS like PV000-ABKRS.
data: S_PABRP like T549Q-PABRP.
data: S_PABRJ like T549Q-PABRJ.
* SELECTION SCREEN *
selection-screen begin of block BL1.
parameters: PAY_VAR like BAPI7004-PAYSLIP_VARIANT default 'ESS_PAYSLIPS' obligatory.
selection-screen end of block BL1.
START-OF-SELECTION.
s_ABKRS = PNPXABKR.
S_PABRP = PNPPABRP.
s_pabrj = PNPPABRJ.
w_begda = PN-BEGDA.
w_endda = PN-ENDDA.
get pernr.
* "Check active employees
rp-provide-from-last p0000 space pn-begda pn-endda.
CHECK P0000-STAT2 IN PNPSTAT2.
* "Check Payslip Mail flag
rp-provide-from-last p0655 space pn-begda pn-endda.
CHECK P0655-ESSONLY = 'X'.
rp-provide-from-last p0001 space pn-begda pn-endda.
* "Find email address
RP-PROVIDE-FROM-LAST P0105 '0030' PN-BEGDA PN-ENDDA.
if p0105-usrid_LONG ne ''.
ITAB-PERNR = P0001-PERNR.
ITAB-ABKRS = P0001-ABKRS.
ITAB-ENAME = P0001-ENAME.
ITAB-USRID_LONG = P0105-USRID_LONG.
append itab.
clear itab.
endif.
"SY-UCOMM ='ONLI'
END-OF-SELECTION.
*------------------------------------------------------------------* start-of-selection.
write : / 'Payroll Area : ', S_ABKRS.
write : / 'Payroll Period/Year : ',STR_MY_MONTH,'-',STR_MY_YEAR. write : / 'System Date : ', SY-DATUM.
write : / 'System Time : ', SY-UZEIT.
write : / 'User Name : ', SY-UNAME.
write : / SY-ULINE.
sort ITAB by PERNR.
loop at ITAB.
clear : P_INFO, P_FORM, P_INDEX, P_LIST, OBJBIN, DOCDATA, OBJTXT, OBJPACK, RECLIST, TAB_LINES.
refresh : P_FORM, P_INDEX, P_LIST, OBJBIN, OBJTXT, OBJPACK, RECLIST.
* Retrieve Payroll results sequence number for this run
select single * from HRPY_RGDIR where PERNR eq ITAB-PERNR
and FPBEG ge W_BEGDA
and FPEND le W_ENDDA
and SRTZA eq 'A'.
* Produce payslip for those payroll results
if SY-SUBRC = 0.
call function 'GET_PAYSLIP'
EXPORTING
EMPLOYEE_NUMBER = ITAB-PERNR
SEQUENCE_NUMBER = HRPY_RGDIR-SEQNR
PAYSLIP_VARIANT = PAY_VAR
IMPORTING
RETURN = RETURN
P_INFO = P_INFO
TABLES
P_FORM = P_FORM.
check RETURN is initial.
* remove linetype from generated payslip
loop at p_form.
objbin = p_form-linda.
append objbin.
line_cnt = line_cnt + 1.
endloop.
file_length = line_cnt * 1022.
* create spool file of paylsip
CALL FUNCTION 'SLVC_TABLE_PS_TO_SPOOL'
EXPORTING
i_file_length = file_length
IMPORTING
e_spoolid = spool_id
TABLES
it_textdata = objbin.
IF sy-subrc EQ 0.
WRITE spool_id.
ENDIF.
DESCRIBE table objbin.
DATA PDF LIKE TLINE OCCURS 100 WITH HEADER LINE.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
SRC_SPOOLID = spool_id
NO_DIALOG = ' '
DST_DEVICE = 'MAIL'
* PDF_DESTINATION =
* IMPORTING
* PDF_BYTECOUNT = l_no_of_bytes
* PDF_SPOOLID = l_pdf_spoolid
* LIST_PAGECOUNT =
* BTC_JOBNAME =
* BTC_JOBCOUNT =
TABLES
PDF = pdf
EXCEPTIONS
ERR_NO_ABAP_SPOOLJOB = 1
ERR_NO_SPOOLJOB = 2
ERR_NO_PERMISSION = 3
ERR_CONV_NOT_POSSIBLE = 4
ERR_BAD_DESTDEVICE = 5
USER_CANCELLED = 6
ERR_SPOOLERROR = 7
ERR_TEMSEERROR = 8
ERR_BTCJOB_OPEN_FAILED = 9
ERR_BTCJOB_SUBMIT_FAILED = 10
ERR_BTCJOB_CLOSE_FAILED = 11
OTHERS = 12
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*Download PDF file C Drive
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
filename = 'C:\itab_to_pdf.pdf'
filetype = 'BIN'
TABLES
data_tab = pdf.
* Transfer the 132-long strings to 255-long strings
* LOOP AT pdf.
* TRANSLATE pdf USING ' ~'.
* CONCATENATE gd_buffer pdf INTO gd_buffer.
* ENDLOOP.
* TRANSLATE gd_buffer USING '~ '.
* DO.
* it_mess_att = gd_buffer.
* APPEND it_mess_att.
* SHIFT gd_buffer LEFT BY 255 PLACES.
* IF gd_buffer IS INITIAL.
* EXIT.
* ENDIF.
* ENDDO.
OBJHEAD = 'Objhead'.
append OBJHEAD.
* preparing email subject
concatenate W_ENDDA(6)
' Payslip-'
ITAB-ENAME+0(28)
ITAB-PERNR+4(4) ')'
into DOCDATA-OBJ_DESCR.
DOCDATA-OBJ_NAME = 'Pay Slip'.
DOCDATA-OBJ_LANGU = SY-LANGU.
OBJTXT = 'Pay Slip.'.
append OBJTXT.
*prepare email lines
OBJTXT = DOCDATA-OBJ_DESCR.
append OBJTXT.
OBJTXT = 'Please find enclosed your current payslip.'.
append OBJTXT.
* Write Attachment(Main)
* 3 has been fixed because OBJTXT has fix three lines
read table OBJTXT index 3.
* DOCDATA-DOC_SIZE = ( 3 - 1 ) * 255 + strlen( OBJTXT ).
clear OBJPACK-TRANSF_BIN.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM = 0.
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM = 3.
OBJPACK-DOC_TYPE = 'RAW'.
append OBJPACK.
* Create Message Attachment
ATT_TYPE = 'PDF'.
describe table OBJBIN lines TAB_LINES.
read table OBJBIN index TAB_LINES.
* OBJPACK-DOC_SIZE = ( TAB_LINES - 1 ) * 255 + strlen( OBJBIN ).
OBJPACK-TRANSF_BIN = 'X'.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM = 0.
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM = TAB_LINES.
OBJPACK-DOC_TYPE = ATT_TYPE.
OBJPACK-OBJ_NAME = 'ATTACHMENT'.
OBJPACK-OBJ_DESCR = 'Payslip'.
append OBJPACK.
* Create receiver list refresh RECLIST.
clear RECLIST.
RECLIST-RECEIVER = itab-USRID_long.
translate RECLIST-RECEIVER to lower case.
RECLIST-REC_TYPE = 'U'.
append RECLIST.
* Send the document
*SO_NEW_DOCUMENT_ATT_SEND_API1
call function 'SO_DOCUMENT_SEND_API1'
exporting
DOCUMENT_DATA = DOCDATA
PUT_IN_OUTBOX = 'X'
COMMIT_WORK = 'X'
* IMPORTING
* SENT_TO_ALL =
* NEW_OBJECT_ID =
tables
PACKING_LIST = OBJPACK
OBJECT_HEADER = OBJHEAD
CONTENTS_BIN = pdf
CONTENTS_TXT = OBJTXT
* CONTENTS_HEX =
* OBJECT_PARA =
* OBJECT_PARB =
RECEIVERS = RECLIST
exceptions
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
others = 8.
if SY-SUBRC NE 0.
ITAB-MTEXT = 'Message Not Sent to : '.
else.
ITAB-MTEXT = 'Message Sent to : '.
endif.
* else.
* ITAB-MTEXT = 'Message Not Sent to : '.
* endif.
else.
"SY-SUBRC Not = 0
ITAB-MTEXT = 'Payroll data not found : '.
endif.
"end of SY-SUBRC = 0.
modify ITAB.
endloop. "end loop at ITAB
sort ITAB by MTEXT PERNR.
loop at ITAB.
at new MTEXT.
uline.
write : / ITAB-MTEXT color 4 intensified on.
write : / 'Emp. Code' color 2 intensified on,
12 'Emp. Name' color 2 intensified on,
54 'Email ID' color 2 intensified on.
endat.
write : / ITAB-PERNR, 12 ITAB-ENAME, 54 ITAB-USRID_LONG.
endloop. -
Need help for the Function Module 'PFL_GET_PARAMETER_INFO'
Hi Experts,
The FM 'PFL_GET_PARAMETER_INFO' returns the value for Profile Parameters for a system .
The inputs required for this FM are :
1. Parameter name : ( eg . login/min_password_lng etc. )
2 . Parameter Type
I am not sure about what the value of Parameter Type should be .
Its a mandatory field.
I have tried to search but could not find anything.
Can you please help me on this?
Thanks in Advance,
Harshit Rungta
Edited by: harshit rungta on May 27, 2011 8:15 AMWhat exactly is the use-case for this?
Many developers "c-call" the params and neglect this feature of the type - also whether it is static or dynamic. Some params are even dynamic as system profiles in one direction but static as instance parameters in the other direction when changing the value.
As you cannot create your own system profile parameters, I do not see the use-case for why you are wanting to check it in advance, because the application APIs should do this.
What you are possibly looking for is function module SUSR_GENERATE_PASSWORD in this case. It will respect "the rules" in the params.
Do not use the legacy function RSEC_GENERATE_PASSWORD directly.
Cheers,
Julius -
Documentation about this function module
ineed Documentation about this function module RP_ANSAL_FROM_PERNR
Hi Avinash,
Have a look at the function group program documentation.It gives an idea of what the function module does.
Short text
Annual Salary Functionality (ANSAL)
Description
This function group contains different functionality for calculating the annual salary, and calculating a period salary from the annual salary.
The function group evaluates different tables and features:
Tables
T503 defines whether an employee is paid on an
hourly basis or per period
T510W defines the time unit
T511 determines the relevant module from the annual
salary wage type, rounding, etc.
T539J defines the valid wage types for calculating
the annual salary
Features
ANSAL defines the annual salary wage type
PFREQ number of periods per year
Old U510F -> use T510F ?
Thanks
Lakshman -
EDMS: 'Missing authorization for this functionality' when searching user
Hi,
I've activated ALC authorization for DMS. In EDMS, when trying to add an user to a DIR with search function an error occurres as below.
'Missing authorization for this functionality'
BTW, the user has contains SAP_ALL profile. It can't be any authorization reasons.
Regards,
YemiHi,
authorization checks will not happen if the search help from sap-gui.I
think the problem is releted to missing implementation of "check
function module" from your side. If the search help is linked to a
"master data table" (type A) a check function must be implemented to
check the permission of the user.
This function module is read from table BAPIF4T. Please
check the following link: http://help.sa
p.com/saphelp_nw04/helpdata/en/a5/3eca044ac011d189
4e0000e829fbbd/content.htm
http://wiki.sdn.sap.com/wiki/display/PLM/Object+Link+search+in+EasyDMS
Regards,
Hari -
Table to find out the function modules used in a particular program
Hi,
Is there any standard table to find out the function modules used in a particular program?
Such as there is a table D010TAB to find out the tables used in a program .Hello
There is no exist such table.
But try this snippet:
REPORT ZSEARCH.
PARAMETERS: P_NAME LIKE D010SINF-PROG.
DATA: PROGTXT(72) TYPE C OCCURS 0 WITH HEADER LINE.
DATA: TMP(72) TYPE C OCCURS 0 WITH HEADER LINE.
DATA: FUNCT TYPE RS38L_FNAM OCCURS 0 WITH HEADER LINE.
DATA: INCL TYPE RSEUINC OCCURS 0 WITH HEADER LINE.
CALL FUNCTION 'RS_GET_ALL_INCLUDES'
EXPORTING PROGRAM = P_NAME
TABLES INCLUDETAB = INCL.
LOOP AT INCL.
READ REPORT INCL-MASTER INTO TMP.
APPEND LINES OF TMP TO PROGTXT.
REFRESH TMP.
ENDLOOP.
READ REPORT P_NAME INTO TMP.
APPEND LINES OF TMP TO PROGTXT.
LOOP AT PROGTXT.
IF PROGTXT CS 'CALL FUNCTION'.
SEARCH PROGTXT FOR ''''.
IF SY-SUBRC = 0.
DO.
SHIFT PROGTXT LEFT BY 1 PLACES.
IF PROGTXT(1) = ''''.
SHIFT PROGTXT LEFT BY 1 PLACES.
DO.
SHIFT PROGTXT RIGHT BY 1 PLACES.
IF PROGTXT+71(1) = ''''.
SHIFT PROGTXT RIGHT BY 1 PLACES.
CONDENSE PROGTXT.
FUNCT = PROGTXT. COLLECT FUNCT. EXIT.
ENDIF.
ENDDO.
EXIT.
ENDIF.
ENDDO.
ENDIF.
ENDIF.
ENDLOOP.
SORT FUNCT.
LOOP AT FUNCT.
WRITE: FUNCT. NEW-LINE.
ENDLOOP.
Maybe you are looking for
-
Problem Install Solaris 10 x86 on HP Workstation.
Hi, I got problem of installation Solaris 10 on HP Workstation, Hardware: Dual pentium III 1000MHz, 2GB Memory, Adaptec 39160 SCSI Controller, Seagate U320 15K 18GB Hardrive. Machine boot up from Solaris 10 DVD, after Configuration Device .. I got th
-
HT5500 can't see Facebook events in the Calendar
I choose the option to sync calendar with Facebook events in settings, but I still can't see them in the calendar, and even though I checked the Facebook calendar in the calendar list. what am I missing?
-
I am trying to change a genre of a song in iTunes 7. I have right-clicked on the song, gotten into Get Info, and can see the current genre but I can't seem to change it. I can't highlight it, select it, or edit it. I'm the administrator and I'm using
-
Crystal 8.5 Error #599 Cannot open SQL Server
I have a user who is viewing Crystal reports (8.5 i think) from a window inside GoldMine CRM software. they are getting an error saying Error #599: Cannot open SQL server. Any ideas?
-
How to assign transaction code to a ABAP program?
Hi, Need help in assigning transaction code to a ABAP program. Any method that will do the job?