TAble store total plan consumption in CJR2 (layout 1-702)

Hi All,
Plz help to find what is the table which save the total plan consumption in in tcode CJR2 with layout 1-702.
I just find Table name : RKPLN , field name MEG, Data element MEGXXX and screen field Z-BDC03.
I cannot find quantity the quantity in August or each month.
Plz help.
Cheers,
Nies

Similar Messages

Table for total planned hrs and total confirmed hrs in prodution order

Hi guys,
I am creating a report for which i need total planned hrs (set up + machine + any other) and confirmed hrs.
For eg., a production order has 10 qty. Standard values are Set up time is 20 min and machine time 5 min for a base quantitiy of 1. So here the planned hrs are 20 + (5*10) = 70 min.
In which table can i find this planned hrs. I can see the standard value in AFVV table. But what logic can i use for calculating the total planned hrs.
Is there any function module for this ?
Thanks
Srini

Hi Srini,
The following details are available in the table AFVV,
Standard value, operation qty & Base qty.
With this values create a formula Standard value * operation qty/ Base qty , this will equal to the planned hours for that particular activity type. Similarlt planned hours for other activities can be calculated.
The actual/confirmed hours are available in the table AFRU.
Regards,
Senthilkumar

Scope of Planning for Total Planning

Hi SAP Gurus,
My Client Scenario is as follows
They import Spare Part materials from abroad to a Main Warehouse (defined as Plant in SAP) and then do stock transfer to around 60+ warehouse in different states (each defined as Plant in SAP).
At any time Stock exists in any of 60+ Plant and Main ware house Plant. However Purchase requirement and Purchase Order is created and placed from Only Main Warehouse Plant.
Now I am implementing Consumption based Planning with MRP. I am Planning to define a Scope of Planning for Total Planning.
Clarification I request :
1. Whether I need to define Only all 60+ Plants in Scope of Planning or can I include Main warehouse Plant also ?
2. In which case if there is requirement in one individual Plant and there exists stock in another one Plant - whether system will automatically create stock transfer Planned order. What Special procurement type I need to define for this (If it is 40 , whether I need to define any Issuing Plant, since I have 60 + Plants)
3. If I have to run Forecast and Planning run daily for 60+ Plants and weekly for Main warehouse Plant, Whether I need to create a Separate Scope of Planning for 60+ Plants and a Separate Variant for Main ware house Plant with different Schedules - Am I correct
Thanks and Regards,
R.Velmurugan.

Hi Kumar,
Thanks for your immediate response.
If we define Special procurement type 40 for 60+ warehouse Plants materials with Supplying plant as Main Warehouse Plant, then if there exists stock in one of 60+ Plants and there is requirement in one of another 60+ plants how system will consider and create stock transfer between them.
Whether stock transfer between 60+ as well as Main plant is Possible ? If possible how to define Special Procurement type ?
Secondly what ever issued from 60+ Plants is the real Consumption of Material (as Material issued from Main ware house plant to 60+ Plants is only stock transfers and not real consumption).
In which case how to go about for forecast and MRP run for 60+ Plants and Main plant ?
Thanks,
R.Velmurugan

No Planning happening with scope of Planning for total Planning

Hi SAP Gurus,
The Scenario is for Consumption based planning and MRP run.
I have created a New Entry under Scope of Planning for total Planning run and entered the required two plants under sequence of Plants.
I have also entered manually consumption values for trial materials in those two Plants. I maintained MRP and Forecast View.
I then ran MD01 using the Scope of Planning created. But when I check the MD04 results for trial materials, no Planning has happened.
I shows a message "Pl carry out Forecast for material xxx in Plant xxx "
Then using T.Code- OMDO, I created a variant for each Plant and also Scheduled. But after then also with MD01, No planning is happening.
When I check under T.Code - OMDU, the respective Plants were activated
Pl guide me the steps for Creating of Scope of Planning and then how to set up planning file and what could be the reason materials are not getting Planned.
thanks and regards,
R.Velmurugan.

Dear Mariano,
MRP type VV (forecast based Planning) is used for these materials.
I defined Scope of Planning for Total planning and included Plants in sequence.
Then I created new Variants for Planning file entries for these Plants (T.Code - OMDO).
Then I created new Variants for Planning file entry consistency for these Plants (T.Code - MDRE)
After then I executed Mass Forecast (T.Code - MP38) and then carried out total planning run using T.Code - MD01.
Now the materials are getting planned.
I missed Forecast run earlier.
I found the reason for the problem, hence closing the thread.
Thanks to Mariano and Daniele for your inputs.
Regards,
R.Velmurugan

ABC Analysis of Planned Consumption(Issue against Reservation).

Hi Experts,
Is there any standard report is available for ABC Analysis of Planned Consumption(material issued against Reservation)?
thx in advance...

Hi,
I allready tested with Tcodes such as MC.9 (gives details of total & unplanned consump. not for Planned consump.) & MB51(gives details for only one Mov. Type say either 261 or 262 not possible to do ABC ana. for balance of both)
Is there any other std report as ABC analysis of planned consp.
Thx in advance...

Regarding Tcode S_ALR_87013018 List:Total Plan/Actual/Commitments

Hi All,
I have to write a Z Report which will be substitute of the transaction S_ALR_87013018(List:Total Plan/Actual/Commitments.) and need to add 2 new columns in the output of the current transaction.
I am stuck up for the logic of retrieving the following columns in the output list by providing the value of internal order/order group on the selection screen :-
1) Overall plan---The overall summary plan value for the life of the order.
2) Actual----
Total expenditures recorded against an internal order.
3) Commitment-Total commitment recorded against an internal order.
Please provide me the logic and table names from where I can retrieve these values on the basis of internal order numbers.
Your responses are appreciated.
Regards,
Amitanshu

Hi,
As far as I can see all three columns you have mentioned are included in standard report. So why donu2019t you simply copy report 6OPL-001 to your own report via TA GRR1.
Btw, you should also create your own report group as it is not advisable to include customer specific reports in SAP standard report groups.
With best regards
Karl

IW32 - Total planned cost value

Hi All,
Can you one of you tell how to get the Total planned cost(i.e. KKBCS_OUT- PLANKOST_G this value is calculated and displayed dynamically in another ALV list of same IW32 transaction when we go to Cost Tab and click on button Rep plan/Act.) value in trasaction IW32.
Regards.

Hi Pete,
Thanks a lot for your reply it was helpful another thing I want to know in which table the Actual Estimated cost IKOSTENKGR gets saved.
Thanks in advance.

BAPI to upload Plan Cost Thru CJR2 Transcation...

Hi all,
I am uploading all plan cost thru CJR2 transcation.I want to know there is any BAPI avail to upload this.points will be rewarded.
Thanks
Dinesh

Hi Sreenivas,
Thank you very much for the guidelines.I have tried the same & got the result.
I have one small change in the requirement, we need to enter plan values against Periods.(1 -12).Different Plan values to different Periods.
I am trying to add period columns from 1 to 12 in the Layout in Report Painter.I couldn't get it.
Could you please guide me how to get it?
Thanls a lot
Suresh Kumar.

Adding Total plan order qty to 2lis_04_p_matnr

Dear BW Gurus,.
I am appending a standard field (GAMNG - Total plan order qty) to the extract structure MC04P_0MAT.When i activated the structure,got it done but with warning that the Field GAMNG is not within the customer namespace...Now when i check the DS,the appended field is present with "HIDE" AND "FIELD ONLY" Options checked.When i try to uncheck them fields and check "select" field and save,it throws an error" THE OLTP SOURCE STILL CONTAIN ERRORS"..Would appreciate any help on this..
manythanks
arun

Hi,
Check by deleting the setup table for the DS 2LIS_04_P_MATNR.
If there is delta already running, then you need to do initialization once again for field GAMNG.
Vis

Total Planned and Total Actual Hours for service order

Hi,
Is there is any table in which I can directly find the Total Planned and Total Actual Hours for service order.Pl suggest.
Regards
SB

Sorry SB, didn't read your post properly... I thought it was costs you were after...
AFVV holds the total actual work at operation level.
PeteA

Total planning quantity field

hi friends,
from which table i get the field for Total planning quantity.
actually i found the structure for it i.e PBPT and fielld name is PLGMG
but i dont get from any data base table.
with regards.

hi shreeram ,
AM60X                            Work fields for SAPMM60X
HM60X                            Help fields SAPMM60X
MDALV_MD73_PBPT    Structure for ALV: Item Data MD73 Ind. R
PBIMOUT               Output Structure Items Planned Independe
PBPT                             Table of ind. requirements item data
PBPTVB                           Reference structure for XPBPT
RBPT                             Table for reference reqmts item data
regards
sandeep patel

MDTB table remains totally empty

Hello,
I need to extract information from the MRP list such as exception messages number and rescheduling date. This data is only available in the MDTB (MRP details) table linked to the MDKP (MRP header).
For some reason, the MDTB table remains totally empty. Is there a way to fill it or another table to take the information from ?? I can't run any function module since i don't have any developper access.
Any help appreciated,
Regards
Olivier

Dear Oliver
Check the settings in Spro
Materials requirement Planning --> Check Performance setting ---> Check storage mode for MRP list
Check the indicator for the relevent plant to have the transparent storage takes place in the table MDTB, whereas the aggregated format is stored in table MDTC.
Regards
Soundararajan M.

Sales order - show total plan costs (from production order) on sales order

Hi all,
I have the following question/scenario:
We create prodction order to collect cost (hours) for a service. There exists also a material master for this service.
The confirmed hours are posted on the production order and then setteld to the respective sales order (settlement rule SDI).
What to I have to maintain/customize to show the total plan cost (for the service) on gthe sales order?
If I check the sales order via VA03 --> environment --> cost report , I can see the planned sales revenue but no planned costs?
(the actual value flows work so far, postings via settlement or billing document).
I hope the topic is understandable. Any ideas?
Thanks in advance.
Edited by: Butch66 on Sep 27, 2010 7:07 PM
Edited by: Butch66 on Sep 27, 2010 7:08 PM

Hi
Planned costs from prod order can not show on sale order.. Both are 2 separate entities in their own respects
Unless you calculate sales order cost estimate on your sales order, you cant see planned costs on sale order...
To calculate sale order cost estimate, make settings in your requirement class...
1. Go to procurement tab of sale order
2. See whats the requirement type
3. Go to IMG > Controlling > Prod cost Contr > Cost Obj Contr > Prod Cost by Sales Order > Control of Requirements
4. Here you can see mapping of req type to req class....
5. If you want to have sales order costing and have sales order as CO object inorder to have sales order wise profitability, you should have following settings in Req class...
>Acct Assignment Category should be E
>Costing: Either Blank or X
>Costing Id and Costing Method: As per your requirement
Regards
Ajay M

Which table stores the data of transaction FBL1N...?

Hi,
Please help me find out which table stores the data ,generated from transaction FBL1N..Actually i need to find out the g/l account against the vendor account that is being displayed in FBL3N's document overview.

Hi,
Data will be retrieved from following table :
tables: lfa1, lfb1, bsik, bsid, kna1, t001,t005, SKAT, SKB1.
In BSIK you have both LIFNR and HKONT. You will get the data based on the LIFNR and HKONT. LIFNR is Vendor and HKONT is GL assigned to the vendor.
Thanks,
Sriram Ponna.
Message was edited by:
Sriram Ponna

Reoprt for Total Plan Revenue & Cost vs Total Actual Revenues & Cost

Hello Gurus,
Business has requested to extract overall plan VS actual values and total plan revenue & cost VS total actual revenue & Cost for all open sales orders Is there any report to fulfill this requirement. If yes please let me know how to get data from SAP.
Appreciate your help!!
Regards,
Prakash.

Stil there is no reply yet.

TAble store total plan consumption in CJR2 (layout 1-702)

Similar Messages

Maybe you are looking for