Sales order - show total plan costs (from production order) on sales order

Hi all,
I have the following question/scenario:
We create prodction order to collect cost (hours) for a service. There exists also a material master for this service.
The confirmed hours are posted on the production order and then setteld to the respective sales order (settlement rule SDI).
What to I have to maintain/customize to show the total plan cost (for the service) on gthe sales order?
If I check the sales order via VA03 --> environment --> cost report , I can see the planned sales revenue but no planned costs?
(the actual value flows work so far, postings via settlement or billing document).
I hope the topic is understandable. Any ideas?
Thanks in advance.
Edited by: Butch66 on Sep 27, 2010 7:07 PM
Edited by: Butch66 on Sep 27, 2010 7:08 PM

Hi
Planned costs from prod order can not show on sale order.. Both are 2 separate entities in their own respects
Unless you calculate sales order cost estimate on your sales order, you cant see planned costs on sale order...
To calculate sale order cost estimate, make settings in your requirement class...
1. Go to procurement tab of sale order
2. See whats the requirement type
3. Go to IMG > Controlling > Prod cost Contr > Cost Obj Contr > Prod Cost by Sales Order > Control of Requirements
4. Here you can see mapping of req type to req class....
5. If you want to have sales order costing and have sales order as CO object inorder to have sales order wise profitability, you should have following settings in Req class...
>Acct Assignment Category should be E
>Costing: Either Blank or X
>Costing Id and Costing Method: As per your requirement
Regards
Ajay M

Similar Messages

  • Internal Order Total Plan cost

    Hello All,
    When the internal order is getting created in ECC from CRM, it should be able to show the plan cost based on the estimated values.
    Can you please help me by telling the correct config/ enhancement that needs to be done to achieve the same. Please note that the Internal order in ECC gets created for each transaction/ service order created in CRM, so manual planning using KP26 is not of the any help for us.
    Best Regards
    Jyoti

    Hello,
    Thanks for the quick response.
    I hvae checked the thread, but it just mentions that there is a possibility of getting it updated based on RFC connection.
    If you have any first hand experience, can you please help me with more specific answer.
    Thanks
    Jyoti

  • How to extract Plan cost from project #

    Hi,
    I am new to PS.I have a requirement for extracting plan cost from Project #
    Is there any FM? or table for this?
    Plan cost should be equal to S_ALR_87013532 report Plan column.
    FYI..I am writing an ABAP report.
    rgds
    vara
    Edited by: Vara K on Jan 13, 2009 11:48 PM

    First Get Struture name for Transaction CJ40
    Goto SE11, and enter your structure name.eg. RKPLN
    Goto the field that holds your data (e.g.WKGXXX), and double-click on the element name. Once inside the element, do a where-used list for that element, searching tables only.
    Then go into each table, and see if you can find the one holding your data.
    E.g COEJ,COEP,COSS
    Regards,
    Nitin

  • IW32 - Total planned cost value

    Hi All,
       Can you one of you tell how to get the Total planned cost(i.e. KKBCS_OUT- PLANKOST_G this value is calculated and displayed dynamically in another ALV list of same IW32 transaction when we go to Cost Tab and click on button Rep plan/Act.)  value in trasaction IW32.
    Regards.

    Hi Pete,
    Thanks a lot for your reply it was helpful another thing I want to know in which table the Actual Estimated cost IKOSTENKGR gets saved.
    Thanks in advance.

  • Actual & planned costs calculated while creating Plant Maintenance Order

    Hi All,
    I would like to know how the actual & planned costs calculated while creating Plant Maintenance Order (PM Order)
    Thanks,
    Ajay

    You need to create an activity rate for 2014 for cost centre 51260201 and activity type NAHG20.
    This can be done via transaction KP26, but is usually performed by your Finance team.
    PeteA

  • Total planned costs

    Hi experts,
            iwant get the total planned costs and total actual costs in plant maintainance which are the fields are suits in r/3 side and which are infoobjects suits in bw side, if those are derived one then which are fields in r/3 and what is the formula for getting those values.
    Thanks & Regards,
    sathish.k

    By using generic datasource as by fs advise closed

  • Sales order with material & plan cost

    Hi,
    A sales order with material and assign WBS can display the plan revenue which equal sales revenue. How can I make the material cost also be display as plan cost? This material cost should equal standard price of material master.

    It is not possible to copy material cost from sales order to project. Please activate network cost planning, and assign the same material in the project structure, so system will take the material cost in plan cost.

  • Planned costs for production order

    Hi,
    I have a requirement where the actual costs and planned costs for a production order have to be displayed. I got the actual cost details from the table COEP.
    Please let me know if anyone knows the table which stores the Planned Costs / or any function modules which can be helpful.
    Thanks in advance.
    Neethu Mohan

    Hi ,
    Please refer the thread,
    How To get Planned Cost for a Production Order
    Best Regards.
    *Reward if it is helpful.

  • Report for extracting the actual and planned cost from service orders

    HI all
    we are creating a report in BI for Module - Customer service . LIke , the report is all about how many complaints created in the system and how many completed technically and what is the cost involved for each complaint .
    Like we want the comparision between the planned cost and the actual cost .
    Now to give the logic to the BI Team for planned cost and actual cost , please suggest the flow of logic or table flow to arrive the planned and actual cost
    thanks in advance

    Hi Marthand,
    I am not sure which datasource your are using. In this case, you can use the 0VALUETYPE to differencitae between th eplan and actuals. Normally Plan which is budget will have value 050 and for actuals will have 010. For costs, you will have one key figure and at the reporting level, you will have the costs restricted by the value type for plan and actual to make comparisons.
    Hope this helps.
    Regards,
    Srinivas

  • Display process order material wise planned cost

    Hi
    When I display process order CO03 and select variant Cost Trend for cost analysis. System show total figure of raw material.
    My requirement is to check material number wise pland qty and value for a process order. Planned Activity Qty and Actual Qty with value
    thanks

    Thanks for reply
    Here is a ABAP report requirment on following format please help me.
    Product :: Description ::  Raw mat :: Planned Mat Qty :: Act Qty :: Planned Mat Cost :: Act Mat cost
    9000     :: Milk           :: 100000     ::  2000Kg             :: 1900      :: 50000      ::  60,000      
    thanks

  • Cost of Production BOM in Prodcution Order

    Hello Experts,
    Here is scenario that i need help :
    Assume that we have a Production BOM with two components with a price of $10 in the pirce list :
    Parent Item: A0001 ( Price of A0001 is $10)
    Components  : A0002,A0003   ( Price of A0002 is $0 and Price of A0003 is $10)
    When we create a prodcution order for A0001 with a quantity 1000 and close , i noticed that in the summary tab of Prodcution Order and noticed that Actual component cost : $10,000 and Actual cost : $0 and Total Variance : $10,000.
    Due to this there is variance in Prodcution Clearing Account. Could you please help me a right approach on how to enter correct cost for Production BOM.
    Any help will be appreicated.
    Thanks,
    Praneeth

    Resolved

  • Transport planning book from Production to Dev/ Test system

    Hi APO Gurus,
    I need clarity for below mentioned point u2013
    I have a correct planning book in production system. I have a different structure in testing as well as in quality system. I want to transport planning book with all data views and macrou2019s associated with it to development system (or in test system).
    How to do this? Please elaborate with details
    Thanks in advance.

    I did the transport from Production to Dev client using TSOBJ last week. Basis team helped in connecting Prod and Dev clients.
    Everyting went ok except selection IDs. When I check 'with selection transport' in TSOBJ, it ends up in short dump saying Timed Out in reading SQL table /sapapo/sdpsetde. We increased the system profile parameter "rdisp/max_wprun_time" from 1800 seconds to 3600 seconds. It still timed out with same message. So, I created the transport without selection IDs and it worked.
    Next, I downloaded the only required selection IDs (total 498) from the DP Planning Area in Production client to excel spreadsheet using table /sapapo/TS_SELKO. Then created another transport using TSOBJ.....this time I used the 'Transport of Selections' section for Selection IDs and used single value selection from drop down, uploaded the IDs from clipboard option. That worked.
    Although my problem is solved....but by any chance, has anyone encountered that TSOBJ Timed out? Is there any OSS note for this?
    -Sachin

  • Is it possible to send Planned Cost from MSP?

    Dear All,
    Is it possible to send Planned Cost (MSP Column = Cost) for resources (Financial Elements) from Microsoft Projects to oracle Projects for a Fully Shared Structures?

    If you are using Rate Schedule then in MSP planned the Hours or Quantity against the Resources then send back the Data to Oracle Projects. System will calculate your Planned Cost using your Hours and Rate Schedule under Workplan Resources. And using your Workplan budget you can always create Financial Budget.
    Khan.

  • IW33 : Good Issue but Cost show in Plan Cost instead of Actual Cost

    Hi All,
    Would like have your helping hand on below issue.
    Warranty Order been done the Good Issue but the cost still planning in plan cost instead of actually cost.
    Information as shown below.
    Thank you advise in advance.
    Trevor Wong.

    Abi,
    Can you see that there is a difference in the the actual costs reported on the Cost tab (350 RM), and those reported using the Rep Plan/Act button (1100RM).
    This is because the Cost tab costs are not correct.
    As pointed out by Maheswaran KD above, please run the correction program RIPMCO00 via transaction SE38/SA38, then check the Cost tab data again.
    PeteA

  • Total Plan values from COSP ( WOG001 to WOG016)

    All,
    I am getting all PLAN values ie WOG001  to WOG016 (fields) from COSP.
    My requirement is i need to sum all these field values (ie WOG001 to WOG016) , While doing this whether i need to consider
    BEKNZ ( Debit/credit ) indicator
    But the description for fields WOG001 shows as  " Total Value in Object Currency"
    Whether it is needed to consider BEKNZ in totalling this ?
    Thanks for all your replies
    a®

    Thank you Dzed,
    I never noticed. thanks
    a®

Maybe you are looking for

  • Can't get EA3500 routers to connect to internet.

    I'm trying to upgrade a pair of WRT54G routers to a new pair of EA3500 routers, but I cannot get the modems to connect to the internet.  I've tried both of the new modems, and multiple connection cables between the Charter cable modem and the router,

  • Re:why unit of measure is changed in miro

    Hi guru's, My user has made a P.O. migo & miro, for the required material P.O. unit is box GR   unit is box I.V    unit is changed to Pcs. the alternate unit of measure maintained for the said material is Pcs & Box. Can anybody advise me what to do t

  • Certificate Signing request on Wireless LAN controller

    Does anyone know how to generate a Certificate Signing Request on 5508 controllers running 7.0.116??

  • AEWFCADApproversServiceWS_5_2

    Hi everyone! I have a quick question: could i use the webservice AEWFCADApproversServiceWS_5_2 for getting the approver for Control Mitigation approve in AE? EX. In CC we set control mitigation's approver, when sending the request for approval, it is

  • How to define User POV on web analysis

    Hi All, I got trouble on how to set user POV, i would like to set up User POV so that desired member will be selected in combo box during different user login. There is 1xx user accounts waiting me to set it up... Pls help....