Table to check status(active or inactive) of objects?
Hi All,
what is the table name, which contains the status of objects.
I want to check all the objects(pgms, tables, classes, FM etc) of server, if they are active or not?
Thanks
santosh.
Hi santosh,
There is NO ONE Table
which will get u all the info.
1. REPOSRC
For programs, above is the tablename.
R3STATE is the field for status.
Note :
If a program is in ACTIVE state first,
and then inactive (due to some modifications)
, then this table will contain TWO entries for it.
a) A = active
b) I = inactive
2. Same Table for FUNCTION MODULES.
In the case of FM,
u will have to check the INCLUDE name
for the corresponding FM.
eg. ZAM_FG01 = function gruop
ZAM_F06 = Function Name.
LZAM_FG01U02 = include name for this FM.
(it can be 02, 03, 01 etc.)
3. For Tables : DD02L
field name = AS4LOCAL
(There will more than 1 record, if table is in inactivated state)
A Entry was activated or generated in this form
L Lock entry (first N version)
N Entry was edited, but not activated
S Previously active entry, backup copy
T Tempory version when editing
4. *----
SVRS_GET_OBJECT_STATE
We can also use the above FM.
for the field object type, the following is necessary !
Program : REPS
table = TABU
regards,
amit m.
Similar Messages
-
Active and inactive portal objects
Hello!
I would like to indentify the active and inactive(unused) objects (Rolles, Worksets, Pages, iviews, etc...) in portal. Can any one advice me how to identify them.
Note:
Version Inforamtion
J2EE Engine - 6.40 PatchLevel 104329.313
Portal - 6.0.17.0.0
KnowledgeManagementCollaboration - 6.0.17.0.0 (NW04 SPS17)
Thanks in Advance,
Immanuel Gollapalli.Hi Immanuel,
a tool that might help you as a super administrator to check object dependencies / delta links and to compare object properties (e.g. for objects where you assume they are multiplied), might be the PCD inspector. Before using it you should be aware of the following comment: T"he change function should only be used with great care and by persons who have expert PCD knowledge. Accidental changes (such as deleting a PCD object) normally cannot be undone and could gravely endanger or permanently damage the portal." So be careful when using this tool. Details can be found in the documentation here: <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/c0/2d8a80b5c12945b48cf29bc203f4b4/frameset.htm">http://help.sap.com/saphelp_nw2004s/helpdata/en/c0/2d8a80b5c12945b48cf29bc203f4b4/frameset.htm</a>
Something that might be interesting for you as well: In order to check the usage of the pcd objects by end users, Portal Activity Reporting is pretty useful. Find documentation here: <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/58/728ea01cf64fff996b827f2a06f9b1/content.htm">http://help.sap.com/saphelp_nw2004s/helpdata/en/58/728ea01cf64fff996b827f2a06f9b1/content.htm</a>
Hope this helps to ease your tasks of finding unused or duplicate pcd objects, best regards
Jana -
Dynamic File Adapter status - Active or Inactive
Hi Experts
Is there any way to set the Sender/ Receiver File adapter status dynamically to inactive or active.
Is there any setting exists in the file adapters ? Please provide me possible solutions.
Thanks
FaheemHi all,
Many thnz for the response.
There is one more way of doing this as well. Just now i found that.
In the runtime workbench - Communication channel monitoring , Select the automatic control for the comminucation channel to make active or inactive .
there are options for our comm channel to run specfic date and time.
Thnz
Faheem -
Change status(Active/Inactive) of file adapter by the external command
Hi, all.
Is it possible to change status(Active/Inactive) of file adapter by the external command?
Let's say, like
"$ switch_file_adapter_status.sh <File Adapter name> <active|inactive>"
or something like that.
Actually, we have the following requirement for the file adapter.
For example, we have many "file adapter to R/3" scenarios and we only want to allow data transfer between 9:00 a.m. to 9:00 p.m.(R/3 service time).
In order to achieve this requirement, one option would be to switch file adapter status between active and inactive by external command line.
And this command will be controlled by the job scheduler(like Tivoli).
Does XI(3.0 or above) have this kind of feature?
Best Regards.Hi,
I don't think that this is possible.
But one Solution for your problem could be a job on xi who execute the Queue.
So that Adapter work the hole time and send the Message to XI Queue which process them not automatically.
And the XI Queue you can trigger with a Job like normal R/3 Jobs.
Hope that helps,
Regards,
Robin -
Change status from active to inactive
Hi Experts,
How can I change status from active to inactive for the InfoCube?
Thank youYou can deactivate a cube by deactivating one of the infoobject in it:
select one of the char in the cube
menu option Extras/Unlock infoobjects
The system will offer you to delete the cube content.
If you agreed, the cube becomes inactive.
Please assign if helpful -
SAP Production order TECO double status - active & inactive
Hi,
I have a question, please advise, if I need to be worried on this,
TECO job ran and put in a TECO status on the production order on 31/1/2015
CLOSE job ran and put in CLSD status on the production order on 02/1/2015
But when I see the production order hear - Status change, i see in the TECO section two entries - Active and Inactive. The date on the Active is the actual date when the TECO job ran and the date on the Inactive is the date when the CLOSE job ran.
Any insight into why the system shows this way. thank youHi,
This is correct process, no need to worry.
The active status was TECO. You can see your REL status was made Inactive on that day.(31/1).
When you closed the order, TECO became inactive and superior status CLOSE became active.
Thanks
Prem -
I want Queue status weather it is Active or inactive
HI,
please any one let me know information about the Issue
i want Queue status weather it is Active or inactive
from which file weblogic server will get information
Reply me as early as Possible
Regards,
SrinivasU can use the follwoing JMX Code
http://weblogic-wonders.com/weblogic/2010/01/21/jms-resources-using-jmx/ -
Software Update status stuck in Unknown Client check passed/Active
I've been rooting around in this for a week now so I'm looking for some other ideas.
A couple of weeks back I tried publishing some updates from SCUP into SCCM. Shortly thereafter I started seeing all my client getting stuck in Unknown "Client check passed/Active" status for Software Updates, starting with my most recent Software
Update Groups and progressively creeping its way back into older ones.
Clients' WUAHandler.log show errors with <![LOG[OnSearchComplete - Failed to end search job. Error = 0x8024000f.]LOG]!><time="18:16:20.329+240" date="08-14-2014" component="WUAHandler" context="" type="3"
thread="2496" file="cwuahandler.cpp:3064">
Client WindowsUpdate.log shows the same error code: 2014-08-15 11:37:16:278 520 1b7c Agent WARNING: WU client failed Searching for update with error 0x8024000f.
I also have one of my older deployments starting to pick up a status of Error, code 0X8024000F "Circular update relationships were detected in the metadata."
I found some folks with similar issues where they were advised to remove the offending updates from their packages. I never got the SCUP updates into any packages; they were showing up as Metadata Only and I started troubleshooting this issue instead. At this
point I have removed everything from SCUP showing in SCCM console just to make sure. (I think I expired them all in SCUP and then synced with it again.)
I have tried several client-side fixes that have not resolved the issue (KB971058, rebuild the SoftwareDistribution folder, KB947821).
I have even uninstalled the WSUS role off my server, restarted, then reinstalled. SCCMw ill sync happily with WSUS and received this week's updates successfully but it cannot pull a status for these new updates and all the existing ones still sit in Unknown
status in their deployments. I tried creating a new small deployment and it still gets stuck in the same place.
It looks like my Software Updates metadata in SCCM is a mess and I'm not sure how to resolve it. I think the next step I can think of is to strip the SUP role off the server and pop it back in after its had some time to clean itself up. Does anybody have
any other less severe suggestions?Hi,
There is someone remove all the third-party metadata in WSUS Database, then run full sync and initiated scan cycle on the machine. The client successfully scanned updates.
But editing database directly is unsupported by Microsoft.
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Cannot Change Item Status from Active to Inactive
Dear All
Cannot Change Item Status from Active to Inactive on Item master screen. can any one provide the steps.
Best Regards
ArifuddinCheck on below link under "Defining Item Status Codes"
http://docs.oracle.com/cd/E18727_01/doc.121/e13450/T291651T291798.htm#I_t_ditstatus
thanks -
Software Update Deployment - Compliance Status = Unknown - Client Check passed/active
Hi,
First I want to say, that I found many Forum-Posts which describes a similar issue, but it is not exactly my issue...
I have a ADR (Auto Deployment Rule) which creates every Month a Windows Update Package, and deploys it. The Deployment starts from a custom day, and ends 14 days later (Deadline). Now I have the issue, that the compliance chek in the deployment status is
"reseted" every day (at 0:00) - (at least after the Deadline!)... The Compliance Check starts every day at 0:00 and then tries to reach every Computer again! So if the Computer-object is powered on and responding, it turns over to compliant (because
it is already compliant - the Windows Update Installation works fine...). But if the Computer is not powered on / not responding the next day, it turns over to "Unknown - Client check passed/active" instead of staying in the Status "compliant"
until it is powered on / respinding again, then it changes over to compliant again... Why is that?
Is there a issue with the Client Settings?:
- Software Update Scan (every day)
- Software Update Re-Evaluation (every day)
- Compliance Settings (every day at 0:00) -> but is this not for the Configuration Baselines?
any other ideas?
PatrikAs soon as the computer get the Software Update configuration items, it will start compliance checking, then send the compliance check result to MP.
From your description, the powered on computers sent the state message to the MP when they got the deployment policy. And the frequency of Status Summarizers of updates deployment for a deployment that was modified in the last
30 days is 60 minutes. Because the site server had not recieved the state message from the powered off computers so that the compliance state was changed to Unknown.
Juke Chou
TechNet Community Support -
No request generated for batch status active/ inactive settings
Dear Experts ,
When is make the status "active " for batch in IMG , Logistics general , Batch management , Specify Batch Level and Activate Status Management,Define Batch Status management , THE SYSTEM DOESNT ASK FOR A REQUEST .
Plsease tell em if it is ok for the system to NOT TO ASK FOR A CHANGE REQUEST ?
IF yes , please let me know if we need to directly make the above settings in the [production server ???????
Regards
Anisany response ?
-
Table for user status field in CJ20n transaction project defination
HI ALL,
what is table for user status field in CJ20n transaction project defination creation. This field is in Basic Data tab.
Thanks.Hi,
Check following tables for Usre status:
TJ30 - User status
TJ30T - Texts for user status
TJ20 - Status profile
JEST - Object status
JSTO- WBS status profile.
Check this code:
REPORT zps_get_userstatus .
PARAMETERS: p_posid LIKE prps-posid.
*-- Constants
CONSTANTS: gc_yes(1) TYPE c VALUE 'X',
gc_no(1) TYPE c VALUE ' '.
*-- Variables
DATA: l_objnr LIKE prps-objnr.
*-- Internal tables
DATA: BEGIN OF lit_jest OCCURS 0,
objnr LIKE jest-objnr,
stat LIKE jest-stat,
END OF lit_jest.
DATA: BEGIN OF lit_jsto OCCURS 0,
objnr LIKE jsto-objnr,
stsma LIKE jsto-stsma,
END OF lit_jsto.
DATA: BEGIN OF lit_status OCCURS 0, "Combination of JEST & JSTO
objnr LIKE jest-objnr,
stsma LIKE jsto-stsma,
stat LIKE jest-stat,
END OF lit_status.
DATA: BEGIN OF lit_usrsta OCCURS 0, "Uer status for all wbs
objnr LIKE jest-objnr,
stsma LIKE jsto-stsma,
stat LIKE tj30t-estat,
txt04 LIKE tj30t-txt04,
END OF lit_usrsta.
DATA: BEGIN OF lit_usrtxt OCCURS 0, "User Status text - TJ30T
stsma LIKE tj30t-stsma,
stat LIKE tj30t-estat,
txt04 LIKE tj30t-txt04,
END OF lit_usrtxt.
* get WBS object number
SELECT SINGLE
objnr FROM prps
INTO l_objnr
WHERE posid = p_posid.
* get WBS active status from table JEST
SELECT
objnr
stat
FROM jest INTO TABLE lit_jest
WHERE objnr = l_objnr AND
inact <> gc_yes.
* get WBS status profile from table JSTO
SELECT
objnr
stsma FROM jsto
INTO TABLE lit_jsto
WHERE objnr = l_objnr.
* combine JEST and JSTO table for user status
LOOP AT lit_jest.
IF lit_jest-stat CP 'E++++'.
READ TABLE lit_jsto WITH KEY
objnr = l_objnr.
IF sy-subrc = 0.
lit_status-objnr = lit_jest-objnr.
lit_status-stsma = lit_jsto-stsma.
lit_status-stat = lit_jest-stat.
APPEND lit_status.
ENDIF.
ENDIF.
CLEAR: lit_jsto, lit_status.
ENDLOOP.
* get text for user status
SELECT DISTINCT
stsma
estat
txt04 FROM tj30t
INTO TABLE lit_usrtxt
FOR ALL ENTRIES IN lit_status
WHERE stsma = lit_status-stsma AND
estat = lit_status-stat AND
spras = sy-langu.
Let me know if you have any question.
Regards,
RS -
my client asked me " how to see emploee is active or inactive" for head count plz help me.
Hi,
Try to use 'COP' operation for the Infotypes. We can check in PA30 main screen the status of the employee provided if we have configured the status to be visible in the screen. We can also check in table PA0000 the status of the employee - STAT2 field will provide the status information.
Thanks,
Sriram -
Upload text file to oracle table with checking and aggregation
Hi Friends,
I am new to ODI. I have encountered a problem which is specific to ODI 11G (11.1.1.6.3) to upload text file to oracle table with checking and aggregation. Would you please teach me how to implement the following requirement in ODI 11G?
Input text file a:
staffCode, staffCat, status, data
input text file b:
staffCodeStart, staffCodeEnd, staffCat
temp output oracle table c:
staffCat, data
output oracle table d:
staffCat, data
order:
a.staffCode, a.staffCat, a.status
filter:
a.status = ‘active’
join:
a left outerjoin b on a.staffCode between b.staffCodeStart and b.staffCodeEnd
insert temp table c:
c.staffCat = if b.staffCat is not null then b.staffCat else a.staffCat
c.data = a.data
insert table d:
if c.staffCat between 99 and 1000 then d.staffCat = c.staffCat, d.data = sum(c.data)
else d.staffCat = c.staffCat, d.data = LAST(c.data)
Any help on fixing this is highly appreciated. Thanks!!
Thanks,
ChrisDear Santy,
Many thanks for your prompt reply. May I have more information about the LAST or SUM step?
I was successful to create and run the following interfaces p and q
1. Drag text file a to a newly created interface panel p
2. Filter text file a : a.status = ‘active’
3. Lookup text file a to text file b : a.staffCode between b.staffCodeStart and b.staffCodeEnd
4. Drag oracle temp table c to interface panel p
5. Set c.staffCat : CASE WHEN b.staffCat IS NULL THEN a.staffCat ELSE b.staffCat END
6. Set c.data : a.data
7. Drag oracle temp table c to a newly created interface panel q
8. Drag oracle table d to interface panel q
9. Set UK to d.staffCat
10. Set Distinct Rows to table d
11. Set d.staffCat = c.staffCat
12. Set d.data = SUM(c.data)
However, the interface q should be more than that:
If c.staffCat is between 99 and 1000, then d.data = the last record c.data; else d.data = sum(c.data)
Would you please teach me how to do the LAST or SUM steps? Moreover, can interface p and interface q be combined to one interface and do not use the temp table c? Millions thanks!
Regards,
Chris -
Enabling Create New Query and Personalize in Check Status
Hi All,
We followed below steps Enable Create New Query and Personalize in Check Status
Go to the role of the user - PFCG - Authorizations - Change authorization data - Cross-application authorization objects - authorizations for Personal Object Work List (POWL) iViews
Specified the application ID POWL_APPID - SAPSRM_E_CHECKSTATUS
What should be done to enable define query and personalize for all users.
We have changed the following settings -
In activity POWL_CAT - '??' , POWL_LSEL-DISALLOWED - POWL_QUERY - ?? , POWL_RA_AL - ?? , POWL_TABLE - ??.
With our current settings Create New Query and Personalize in Check Status appear but are disabled (greyed out)
New Query Button appears but clicking on it produces no output.
Nikhil
Edited by: Nikhil Malvankar on Sep 12, 2011 5:57 AMYou could the following to check if the Query still exists in the database:
Open SQL Management Studio and connect to the SQL Server hosting the ConfigMgr database
In SQL Managemnt Studio, Expand Database, Expand CM_YourSiteCode
Expand tables and find the dbo.Queries table
Right-click the dbo.Queries table and select Select Top 1000 Rows
See if you can find your "ghost" Query
Please note - it IS NOT supported
to make direct changes to ConfigMgr database so I would properly call PSS on this one before you start getting creative.
Maybe you are looking for
-
Ease in/out of effect in Motion TAB ?
From the Motion tab inside FCP- Is there a way to create an ease IN/OUT of a size or rotation change? example: I have a rotating postcard graphic that snaps into it's final position and I would like it to ease into that resting spot with more grace.
-
I have a hp dv6-3060si laptop and when i turn it on, it states the fan is not working correctly, then shuts down after 15 seconds or continues to windows if I press enter. I cleaned all the air vent with compressed air and still get same mesage when
-
Destination volume for Reader 9
How do I get a destination volume to appear in step 2 of installation of Reader 9 on mac intel using firefox?
-
I use MDT 2013 to build reference images, and SCCM to deploy them, as I'm sure most people do. I get a folder left behind in the Users folder: C:\users\ADMINI~1\AppData\Local\Temp. The folder is empty, so I'm not sure how to figure out how to find wh
-
my i phone 3gs has crashed and all that is left on the screen is the i tunes logo and the usb cable picture, when i plug the phone into my laptop its asking me to restore the phone and this will erase all my data. is there any way around this so i do