Table with Pages: � Previous 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11

Hi!
How to generate a table with Pages: "� Previous 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 Next �"
like when you do a search in this forum..
but my data will be comming from a database.
Thanks in advance!
Regards,
Pao

Check out this link,
http://forum.java.sun.com/thread.jspa?forumID=45&threadID=417030
if you're not clear, let me know your email id...I will send my source code.

Similar Messages

I can no longer tab between cells in a table with pages 5.0.

I use pages everyday for filling in my work booking sheets. I need to have them synching to the cloud, so I can access the client information while on the road.
My booking sheet is basically a large table with many cells for name, address, phone number, etc. In pages 4.3 I could enter some information into the cell, hit the tab button, and it would go straight to the next cell in the table. This was a quick and easy way for me to fill out my forms on the computer.
Well, since the update, the tab button only moves the cursor over in the same cell, as opposed to the next cell. It is VERY rare to need to tab in a cell, as opposed to going to the next cell.
I did figure out that I could Option+ Tab to move to the next cell, but it is very hard to change my procedure of tabbing after all this timing doing it the other way.
Am I just missing a preferance to tab between cells, instead of inside a cell?
Thanks
Dave

Option-tab makes sense and can be done with the left hand's thumb/forefinger.
Using tab was always arse-backwards as it defeated the use of tab within the table cell.
Best to use both for what they always do:
Option tab or an arrow key (singular) to jump cells
tab to jump to the next tab in the text wherever it is within or without cells.
The contrary precedence was set by Microsoft and was a bad idea. In good UI you do not have shortucts reverse roles such that you need to pay excessive attention to the context.
Peter

Table in main window with page break in smartforms

I want to print data with heading and items in tabuler form (grid form) using table with PAGE PROTECTION in main window in smartform.
if you would say staight way to use Table or Template under FOLDER with page protection, will not work.
So, it is little bit tricky. So,if any body have a proper solution please help.
Thanks and regards,
Vijay Kr. Gupta

Hello,
Include the Text ELEMENT U have used to draw the table in the loop of the main window.
Vasanth

Pages '08 - Tables with Functions

Pages '08 does a much better job calculating and recalculating a currency sum in a table than does MS Word. With Pages you can draw a table, label, place functions and they will recalculate directly in Pages.
With MS Word, you have to set up the table in Excel and then link or enbed the Excel information in Word. Then when you want to update the information in Word, you have to update in Excel first, before it will update in Word.
I like Pages '08 where you update directly in Pages without having to use Numbers as a link or enbeded.
If anyone knows how to do what Pages '08 does, and can do the same in MS Excel, please let me know.
Thanks,
Frank

Hello
What you get is not surprising.
Th code used to rule tables in Pages is exactly the code used to rule a table in Numbers.
I just wish to add that you may do more complex things is you work in Numbers.
You may use the Numbers Sheet as a blank sheet of paper on which you may put everything:
text frames
paint objects
draw objects
tables which may be linked
This is the same kind of documents than those named Draw ones in AppleWorks with many added features, bells and whistles
The only missing feature (at least from my point of view) is a tool allowing us to import AppleWorks Draw documents in these Numbers ones.
Yvan KOENIG (from FRANCE lundi 21 janvier 2008 21:01:42)

Tables with more than one cell with a high number of rowspan (ej. 619). This cell can not be print in a page and it must be cut. But I don't know how indesign can do this action.

Tables with more than one cell with a high number of rowspan (ej. 619). This cell can not be print in a page and it must be cut. But I don’t know how indesign can do this action.

set the wake-on lan on the main computer
The laptop's too far away from the router to be connected by ethernet. It's all wifi.
No separate server app on the laptop, it's all samba
The files are on a windows laptop and a hard drive hooked up to the windows laptop. The windows share server is pants, so I'd need some sort of third party server running. Maybe you weren't suggesting to use Samba to connect to the windows share though?
I'm glad that you've all understood my ramblings and taken and interest, thanks The way I see it, I can't be the only netbook user these days looking for this kind of convenience, and I certainly won't be once chrome and moblin hit the market.
Last edited by saft (2010-03-18 20:38:08)

How do I move a table with radio buttons to another page?

I created a document in Word, converted to PDF, added a page (which was created in Adobe Forms Central, only way to get a table with radio buttons - see below for example).
The issue I have is whilst using the Trial of Adobe XI Pro I was able to move this table up a page and place it under the header. Now that the trial has run out I cannot complete this task with other documents.
I started to edit using LiveCycle but it won't let me move the table.
We have Acrobat X Pro but when I go to edit, it directs me to edit in LiveCycle. I have tried moving the table using all of these programs. Can anyone help/guide please?

Thank you for your reply. I am new to editing a pdf and using these programs. I have subscribed to Acrobat XI Pro. When I try to edit the document it directs me to LiveCycle. I cannot move the table in LiveCycle. It won't let me, and I cannot make changes in XI Pro as I did in the trial as it directs me to edit in LiveCycle. Am going in circles.

Create a new column in a table that compares the value of one column with its previous value

The DDL:
DECLARE
@T TABLE
IDNO
int,
name
varchar(40),
[Date]
datetime2,
Price1
float,
Price2
float
DECLARE
@K TABLE
IDNO
int,
name
varchar(40),
[Date]
datetime2,
Price1
float,
Price2
float
INSERT
INTO @T
VALUES(22,'C_V_Harris','2014-01-02 10:23:49.0000000',
23.335,
23.347)
INSERT
INTO @T
VALUES(21,'C_V_Harris','2014-01-02 10:05:13.0000000',
23.357,
23.369)
INSERT
INTO @T
VALUES(20,'C_V_Harris','2014-01-02 09:56:15.0000000',
23.364,
23.377)
INSERT
INTO @T
VALUES(19,'C_V_Harris','2014-01-02 09:45:26.0000000',
23.351,
23.367)
INSERT
INTO @T
VALUES(18,'C_V_Harris','2014-01-02 09:43:20.0000000',
23.380,
23.396)
INSERT
INTO @T
VALUES(17,'C_V_Harris','2014-01-02 09:34:28.0000000',
23.455,
23.468)
INSERT
INTO @T
VALUES(16,'C_V_Harris','2014-01-02 09:30:37.0000000',
23.474,
23.486)
INSERT
INTO @T
VALUES(15,'C_V_Harris','2014-01-02 09:18:12.0000000',
23.419,
23.431)
INSERT
INTO @T
VALUES(14,'C_V_Harris','2014-01-02 09:16:06.0000000',
23.360,
23.374)
INSERT
INTO @K
SELECT
ROW_NUMBER()
OVER (ORDER
by IDNO)
AS RN,*
FROM
@T
SELECT
* FROM
@K
--not working:
SELECT
a.RN,a.Price2
FROM
@K a
INNER
JOIN @K
b
ON
a.RN=b.RN-1
WHERE
a.Price2>b.Price2
I need to create a view with a column (say 'Comp' below) that compares the value of each row in Price2 with the previous Price2 row, and it is greater then +1, the
same 0, and less -1.
The processed table should be:
IDNO
name
Date
Price1
Price2
Comp
22
C_V_Harris
1/2/2014 10:23:49
23.335
23.347
0
21
C_V_Harris
1/2/2014 10:05:13
23.357
23.369
1
20
C_V_Harris
1/2/2014 9:56:15
23.364
23.377
1
19
C_V_Harris
1/2/2014 9:45:26
23.351
23.367
-1
18
C_V_Harris
1/2/2014 9:43:20
23.38
23.396
1
17
C_V_Harris
1/2/2014 9:34:28
23.455
23.468
1
16
C_V_Harris
1/2/2014 9:30:37
23.474
23.486
1
15
C_V_Harris
1/2/2014 9:18:12
23.419
23.431
-1
14
C_V_Harris
1/2/2014 9:16:06
23.36
23.374
-1
How can I structure the statement to get (the most recent - order by date ) result for Comp?

Satheesh Variath, I just had to make some corrections from your script to get the correct answer:
CREATE
VIEW vw_Comp
AS
SELECT
TOP 1 t.IDNO,t.name,t.[Date],t.Price1,t.Price2,
CASE
WHEN t.Price2
> LAG(Price2,1)
OVER (PARTITION
BY name
ORDER BY IDNO)
THEN 1
WHEN t.Price2
< LAG(Price2,1)
OVER (PARTITION
BY name
ORDER BY IDNo)
THEN -1
ELSE 0
END
AS Comp
FROM
@T t
ORDER
BY DATE
DESC
The adjustments: the selection of the most recent comparison (Top 1) and the use of the function LAG (instead of LEAD) to get the previous value of the column.

How to display data in table with dynamic rows, section wise in a page.

Hello all,
I work on report creation in BI Publisher where I need to display data from xml in a table in pdf format.The output page is divided into two vertical sections , containing tables, with exactly same columns on left and right sections. The number of rows in table depends on the output of the fetching query. The page is to be populated in such a way that, at first, the left table is populated, then the next rows fill up the table on the right section of the page, if more rows are left, they fill up the tables on next page[first the left table, and then the right one, in a similar fashion as in page 1]
On a bird's eye view, the data needs to be simply mapped to a table, with dynamic number of rows, and so can span number of pages depending on size of data. On a implementation level, I am stuck in getting the left section of the page populated first, then the right section[in place of the right page], and then the next page.
Please guide me if someone has any idea in getting this achieved.
Thanks in advance.

Thanks for the response...
I am able to get the desired functionality. I just need the tables to be inside a bigger table, that also has a dividing line between the two columns. This is was is intended in the req. provided to me. The column formatting option provides me a line ,but that is not further modifiable .Please help me in getting a perpendicular line between the two columns, which I need to be of a specified width and color.

Linking table of contents with pages 5.0

I write some help-books for friends and the family.
I wrote down everything I need and I've created a table of contents with page numbers.
Now you can push the numbers behind the headings and you are automatically on the right page for reading the text. (In Pages document)
In pages 5.0 these things are still working fine, but....
When I export the document into a pdf, you can't push/touch the headings and the numbers behind there headings.
With the old pages, after exporting the document into a pdf, you could import it into iBooks on the iPad. In iBooks now you can touch a heading and you'll get on the right page.
That was realy helpfull, 1 click and you could read the text on which you're interested.
But with the new pages 5.0 this feature is deleted... or I do something wrong.
Could anyone of you help me for getting this feature back, if I do something wrong?

Well there is a standard body for EPUB - http://idpf.org/epub
And, Apple furnishes the TEMPLATE - the Pages 09 TEMPLATE - automatically (supposedily) makes the TOC links which - then - you can export to EPUB.
Again, the problem I'm daling with is that the Kindle for the iPad, does not see the TOC. It des see it in the Kindle Softward for the Mac - which is different - for some reason. I have authored two books on Pages but Amazon converts my EPUB file to fit the Kindle device itself.

Importing word 2004 docs with tables into Pages

I work in video production, and my clients send me shooting scrips as word documents formatted with tables. Needless to say, I was quick to discover that Pages doesn't really 'like' these documents. I can't keep asking my clients to reformat their docs as txt files for me - it's very unprofessional.
What I've found is that all the text is there, but the tables don't 'translate' (one cell tries to fit on a whole page and the text gets 'lost' at the bottom). Is there a quick and easy way to remove the tables in Pages but keep the text?
In Word, it's Alt+A, V, B, 0 (I've been formatting and reformatting scripts for 8 years!).
Thanks for your help. I REALLY don't want to have to get Office - I've read so many horror stories about 2008 (especially the excel part).

sknygrydg07 wrote:
Is there a quick and easy way to remove the tables in Pages but keep the text?
In Word, it's Alt+A, V, B, 0 (I've been formatting and reformatting scripts for 8 years!).
Hello,
Have you tried: Select table, then from the Pages Menu; Format > Table > Convert Table to Text?
It might be of some value in this situation.
Jerry

Table of Content with page number for entire pdf

Hi
We need to merge dynamic pdf with n number of static pdf.
The output of the generated pdf has one of the page called Table Of Content with page number.
For this we have created following process
We created a form using Adobe livecycle form designer to populates input data(xml).
We created process to generate dynamic pdf .
We have static pdf's in some folder location(Eg:C:\temp)
We created xsl to generate DDX to merge Dynamic pdf with static pdf's by using an assembler operation in the Process
There are number of static specification pdf's inserted in between of dynamic pdf using logic in xsl.
We used bookmark option in xsl for creating table of content .
While invoking the process we are able to generate the correct merged pdf with some unformatted page of table of content
We can explain better in the following way where we are actually facing a challenge:
We need a table of content in the below mentioned format:
                                                                                                             PAGE
MAIN DESCRIPTION                                                                                    n
ID1             NAME1            DESCRIPTION   1                                              m
ID2POK      NAME2            DESCRIPTION   2                                              m
FDJKHJG
ID3             NAME3            DESCRIPTION   3                                              m
MAIN DESCRIPTION2                                                                              n
ID3            NAME3            DESCRIPTION   5                                               m
ID4            NAME4            DESCRIPTION   4                                               m
ID5            NAME5            DESCRIPTION   5                                               m
Since the pdf merging and numbering is done using ddx at runtime, page number tag is not there in xml and therefore the toc page cannot be populated at the time of form design.
The issue we are facing is that, by using ddx script we are not able to align id,name,description in table of content in proper manner. We want to wrap particular id ,name and description in their respective columns.
Currently, we are getting the below mentioned result which is not in a proper format.
                                                                                                           PAGE
MAIN DESCRIPTION                                                                               n
ID1HDSJHJDHFDJFHD            NAME1FDJFHDJH           DESCRIP
TION 1                                                                                                    m
ID2POKLFDJKHJG           NAME2FDJKFJDKFJKD            DESCRI
PTION   2                                                                                                m
ID3            NAME3            DESCRIPTION   3                                             m
Note: Page numbering has been done only after merging all the pdf(Dynamic and static) using ddx instead of the adobe livecycle form designer.
Is there any solution to resolve the formatting issue or any other option to create table of content dynamically ?

Hi SaCvP,
According to your description, you want to display the table of contents with page number in SSRS 2014.
In Reporting Services, the global variable PageNumber or Totalpages can be only used in the page header and page footer. In your scenario, you can create a table of content using document map, but we can’t specify the expression with PageNumber or Totalpages.
So your requirement can’t be achieved currently.
Reference:
Create a Document Map (Report Builder and SSRS)
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

Form on a Table with Report, 2 Pages

I have a view and i am using this to create a page as follows for insert/update/delete .
(1) create application from scratch
(2) on page 1 using wizard choice "Form on a Table with Report, 2 Pages"
(3) Follows the screens and create the 2 page where first page is a report and when i click on edit(in my case) it goes to next page for insert/update/delete.Everything like insert/update/delete works fine .
Now this view has say three columns
(1) element_type_id
(2) element_name
(3) yesnoflag
changing element_name and yesnoflag column is ok but then i need to have element_type_id corresponding to the element_name from some other table.
Question1
How should i get the element_type_id corresponding to the element_name .so when i create a new record it goes to page 2 and i can provide LOV for element_name and enter into yesnoflag, how can i get the element_type_id populated corresponding to the element_name entered.
Question2
Also in my application i have name element_type_id as primary key .I am not sure if thats a good idea or should i make element_name as primary key ?
please help.
Thanks,
Sachin

hey rui--
by "adjust your html", i simply meant that you should look at your page, think about the html that's being used, and adjust it as necessary to make your data wrap as desired. now that i'm pretty sure i understand your issue, i can tell you the adjustment. you're saying that your form shows your long column "correctly" with data broken up onto separate lines by carriage returns or linefeeds. when you display that same data in your report, those carriage returns ( chr(13) ) and/or linefeeds ( chr(10) ) aren't observed. that's because they don't mean much in regular html. two ways to approach this would be:
a) replace your carriage returns with explicit <br> tags to get the breaks that you want...
select test_id, replace(test_description,chr(13)) test_desc from my_table;
b) wrap your column with <pre> tags to preserve all the original formatting of your data...
select test_id, '<pre>'||test_description||'</pre>' test_desc from my_table;
...and you could, of course, do option B in your report row template if you'd like.
hope this helps,
raj

Recently upgraded to Mavericks... was working with Pages documents from previous OS ... Pages is now frozen and I don't dare force quit and loose my old documents.

Recently upgraded to Mavericks... was working with Pages documents created with previous OS ... Pages is now frozen and I don't dare force quit and loose my old documents. How can I "thaw".... unfreeze Pages? Have several pages windows open that I was working on.

I also had this problem after I installed Mavericks: Pages files freezing at close, need to force quit.
Workaround: when saving any document created with an earlier version of Pages, be sure to untick the "include preview in document".
For some reason, this resolves the problem.
BTW "loose" is not a verb. You probably mean "lose".

SSRS - Table of Contents With Page Number

Hi!
Is it possible to create a table of contents in SQL Server Reporting Services 2014 with the following aspect:
<w:sdt docparttype="Table of Contents" docpartunique="t" id="1230267000" sdtdocpart="t">
Contents<w:sdtpr></w:sdtpr>
Report 1.............................1
Report 2.............................2
Report 3.............................3
</w:sdt>
I don't want Hyperlink because this report is to be used printed. I have some urgency in this question.
Thank you for help!!!

Hi SaCvP,
According to your description, you want to display the table of contents with page number in SSRS 2014.
In Reporting Services, the global variable PageNumber or Totalpages can be only used in the page header and page footer. In your scenario, you can create a table of content using document map, but we can’t specify the expression with PageNumber or Totalpages.
So your requirement can’t be achieved currently.
Reference:
Create a Document Map (Report Builder and SSRS)
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

What is wrong with the table om page 2 (see attached file)

What is wrong with the table om page 2 (see attached file)

MySpecialSceenName wrote:
But there are several empty lines under the text...........
I'm guessing that by that you mean space for several lines, not empty paragraphs. This could be caused by any number of things, but not allowing hyphenation, or hyphantion rules that are too restictive might cause ID to be unable to break a line which would cause it to go into overset, as would possibly some combinations of Keep Options if there is more than one paragraph in the cell or if there is not enough room to fite the entire paragraph and you are just one line short with keep options requiring at least two lines be kept together at the end, for example. Applying No Break to a sting too wide for the cell would do it too.

Table with Pages: � Previous 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11

Similar Messages

Maybe you are looking for