Tables to retrieve work center for target costs
Dear all,
currently i developing a report which requires me to display the work centers and their target and actual hours and costs. I tried using production order link tables but they only show work centers that are related to planned costs. May i know which tables can i refer to, in order to retrieve work centers that contribute to the target costs?
Thanks and Regards
YM
I have a Report for - 'Equipment BOM' - IB03.
Problem: How to find the 'Maintenance work Center ' For Equipment ? (IE03--> Organization > Responsibility> Main. W.Cntr)
[ Note: For Client --> It's not necessary that each Equipment has Production Order, Few Equipments are taken only for Repair purpose, Equipment is there in table - EQUI,
So - Not possible to fetch from AUFK, HIKO or any other order tables. ]
EQUZ-GEWRK has the main work center. Pass the equipment number and valid-to date to get the main work center.
Cheers
Sujay
Similar Messages
-
Hello All,
Can anyone please tell me the tables for target costs in controlling.
Thank you
NivasNo answer received
-
Standard Hours Required on a Work Center for a month along with CC
HI Gurus,
My requirement is :
I need a report which fetches how many hours are required in a month on a particular cost center attached to work center for a plant.
Is there any standard report to fetch this . If no how can we develop a report. Which tables we need to combine in CO and PP.Hi,
Check report S_ALR_8703611.
Regards. -
To find 'Maintenance Work Center' for Equipment (without Production order)
Hi,
I have a Report for - 'Equipment BOM' - IB03.
Problem: How to find the 'Maintenance work Center ' For Equipment ? (IE03--> Organization > Responsibility> Main. W.Cntr)
[ Note: For Client --> It's not necessary that each Equipment has Production Order, Few Equipments are taken only for Repair purpose, Equipment is there in table - EQUI,
So - Not possible to fetch from AUFK, HIKO or any other order tables. ]I have a Report for - 'Equipment BOM' - IB03.
Problem: How to find the 'Maintenance work Center ' For Equipment ? (IE03--> Organization > Responsibility> Main. W.Cntr)
[ Note: For Client --> It's not necessary that each Equipment has Production Order, Few Equipments are taken only for Repair purpose, Equipment is there in table - EQUI,
So - Not possible to fetch from AUFK, HIKO or any other order tables. ]
EQUZ-GEWRK has the main work center. Pass the equipment number and valid-to date to get the main work center.
Cheers
Sujay -
Main work center for notification
which table stores main work centers for service notifications stored and how do i link work center table with notification table
Hi,
<b>CRHD - Work Center Header
QMEL - Quality Notification [/b
U can link this 2 table with the field QMEL-ARBPL = CRHD-ARBPL
Reward Points if it is Useful.
Thanks,
Manjunath MS -
Error " No working/operating time maintained in work center for scheduling"
Hello Friends,
When i am scheduling the planned order than in scheduling log, system throwing the error "No working/operating time maintained in work center for scheduling".
Message no. C7014
But in workcenter, i have attached the grouping and in interval and shift for the available capacity 1, i have maintained the shifts.
According i can see the capacity on that workcenter in CM01.
Same error i am getting when i am scheduling the routing and check the scheduling log.
Regards,
Jitendra.Hi
Have u checked , to maintain the time required to perform the activity in the work-center?
please check, i think, we have to maintain for each activity type.
regards,
rasika -
CAPP Functionality and Custom Z table when maintaining work center standard
Hi,
i have to do enhancmenet to transaction CR02,
Production planning needs to update PP routers with Standard Values that pertain to setup, machine, labor, man calculation, machine calculation. They will use CAPP functionality to accomplish this. Work centers will be classified with characteristics identified as CAPP standard values. The actual standard values will be assigned to each work center using transaction CR02, program SAPLCRA0. The work centers will be classified and standard values assigned.Upon saving the work center entries, the system needs to update the Z table with the assigned characteristic values and store the information by plant and work center. When the CAPP program is executed, the program will go a Z table where the work center characteristics are stored.What if I really don't care about the old historical values??? I only want to populate this information from this point forward. Would that change your mind as to which method to choose???
In this case, you can use the Append Structure. There would be more advantages as you don't have to keep track of data consistency, Locking / Unlocking mechanism etc.
Please refer to the section [Further Remarks on Append Structure|http://help.sap.com/saphelp_nw04/helpdata/en/cf/21eb61446011d189700000e8322d00/frameset.htm]
Regards,
Naimesh Patel -
Tables for Basic end date and work center for operation
Hi!
I need table name to fetch the basic end date of a maintenance order and maintenance work centers with respect to each operation in maintenance order.
Regards,
VM
Edited by: V M on Jul 20, 2010 7:22 AM
Edited by: V M on Jul 20, 2010 7:35 AMHi VM,
Input is Order Number (AUFNR).
You can find the Basic End date of Order in Table AFKO, filed is GLTRP.
For work center in Operations, you can use the Table AUFPL from AFKO.
Pass this AUFPL in AFVC and get the ARBID.
Then pass this ARBID to CRHD Table as OBJID, and get the work Center (ARBPL)
Regards,
MLN Prasad -
Formula parameter in Work Center for 'Costing' tab
Hi all
In the 'costing' tab of the Work center I am using a formula which uses the operation quantity ' which has field name 'MGVRG'. Is there a way I can use an alternate unit of measure as an operation quanity in the formula? Let us say my Routing is defined in Cases and my operation qty is is in cases but I want to pass on the alternate unit of measure LB which is defined in the Material Master. Is there a way I can do it.
thanks a lotHi John,
Not sure if i have understood your query correctly, but when you click on test forumla in the work center it does not display the UoM, so here you can pass the UoM as per your need. In OP52, for SAP_09 you can verify the same.
If my understanding is not correct, please let me know.
Regards,
Vivek -
How do I create a new Work Center for the transaction launcher and links
Hi
The requirement here is for me to find out if I can create a new Work Center that will contain up to 6 assignment blocks and each block having either links to websites and BW reports, or triggers to R/3 applications via the transaction launcher.
Can I do this purely through customising or do I need to create a new view using BSPs? If I can do it through customising please could I have a few pointers to what component I would need to use/copy?
Regards
DeclanHi Robert,
Thanks again for taking the time to reply.
Just so I understand, if I want to show a work center I need to link it to a component / view? I think this was the original query - do I need a developer to create the view that contains the 6 blocks with their links to reports, transactions and websites? I think when I talk about blocks I mean 1 viewset containing 6 views. There is no SAP standard view that would suit my requirements is there? Even if the work center had 8 views, I can always hide the two views in configuration.
After the developer has created the view, I then reference that component in the target Id in the define logical links section of my work center.
If my understanding is right, then it follows that it is not possible to create a user specific work center without some development.
Is this correct?
Cheers
Declan -
How to connect MAPL and PLPO to derive work center for planned order
Hi,
Anybody know how to derive work center using MAPL and PLPO for planned order (PLAF). Is there any connecting table between MAPL and PLPO.
Please help asap.
Regards,
MitaliI guess u r trying to view the detail scheduling info (tab in MD13) for a planned order . In that case -
1. Go to PLAF and enter the planned order number. (PLAF-PLNUM) and get the ID of the capacity requirements record (PLAF-BEDID).
2. With this PLAF-BEDID go to KBED. pass the value here. KBED-BEDID. The KBED-ARBID values are your work center ID.
3. To get the work center texts ( the way is appears in the screen) - Pass this value to CRHD . CRHD-OBJTY = 'A' ( i.e Type work center) and CRHD-OBJID = KBED-ARBID.
Hope it solves ur prob.
Cheers
SKC -
CNR2-assign person to work center error: the cost center is deleted
Hi guys,
i have a problem with assigning a person to a work center using CNR2.
i select the person and i add it but when i hit SAVE i get this warning message:
"RP718: a segment could not be derived". the person will then be allocated to the work center BUT when i check in PA30 i can see that the persons cost center is DELETED :O.
could you please help me with this? i tried a lot of scenarios but i could still not find the answer.
thanks,
emiHi
Cost Center must be maintained for that person in HR master data. Please have your HR person look into this and maintain the data and try again. Cost center and Atype of that person would bring in actual costs (equivalent of hours) on the receiving objects when time sheet is being recorded.
Regards,
PSR -
Work center with two cost centers
Hello,
I have one work center. I can produce two different products on it. For one product the costs should go to cost center 1. For the othe product the costs should go to cost center 2.
How can I realize this scenario?
Kind regards.Dear,
IF you have to take care of capacity planning and scheduling, then you need to use only one WC and having two WC will not serve the pirpose.
Generaly you cannot assign WC to 2 different cost center unless the period is different.
Then the only solution is let the cost get posted to 1 common cost centre. Then at the month end distribute the cost to 2 different cost centers depending on then qty produced.
This is the one laternative we are following. -
How to create a work center for Workflow
Dear all,
I need some material or help to create work center in workflow
for agent assignment.
or
How to assign Multiple responsible agents for a specific task
Regards,
Gaurav SoodHi Imthiaz,
Good Morning,
I will Like describe you the secnario that i am in.
I have customised workflows for
1. Please release PO
2. PO release effected.
Both creator and relesing authority get notification for the same
in SAP Inbox.
In Addition to that i want to assign few other people who should get notification of mail PO Released.
can you explain a bit more about Expression table
regards,
Gaurav -
Operations Executed at a Particular Work Center for a Sales Order
Hi All,
We are using a MTO scenario. I have to get a report in which I have to list work center wise operations (and the corresponding material) which are carried out for a particular sales order.
User will create a sales order, and then do Sales Order based MRP in MD50. System will do a BOM explosion for the header material and will generate planned orders for the production relevant materials. User will then convert all these sales order specific planned orders to production orders. For a particular sales order these would be many operations (at different BOM levels may be ) that would be carried out at a particular work center. I need to get a logic for generating this report. Is there any FM etc or table table-field fetchig logic....
Regardshi,
maintain initial screen entry as sale order.
Pass values to AFPO table. Identify all AFPO-AUFNR values which satisfies AFPO-DAUTY = 10
Transfer AUFNR values to AFKO and check AUFPL (Routing number of operations in the order)
Transfer AUFPL to AFVC and check the value of AFVC-ARBID (Object ID of the resource)
Transfer ARBID to CRHD and check value of ARBPL (Work Center)
Regards,
Pavan
Maybe you are looking for
-
Openings for Software Test Engineers - Full Time - Permanent - Michigan based
The Software Test Engineer is responsible for the verification and validation of embedded software to detailed requirements. This position interfaces to Project Engineering, Hardware Engineering, Software Development, Program Management, and Researc
-
Purchase Order Approval through Mobile Phone / BlackBerry
Dear fellows i am interested in Purchase Order Approval through Mobile Phone / BlackBerry. I have seen MSCA Mobile Supply Chain Application Guide but that is for telnet only devices and specific to supply chain. What are setup requirements to make PO
-
Magenta cast when printing from any app in Mountain Lion
I get a serious magenta cast when printing from any application using my Epson R3000 inkjet. I am aware of the double profile issue. For example in Photoshop I let it do the color management. ML automatically turns off printer color management. My mo
-
TS1702 why can't i update Radarscope on my iPad??
why can't i update Radarscope on my iPad?? i wrote to the publisher and they told me it was an I tunes store issue? I have tried to update numerous times and it fails to update; tells me the update is not available at this time. app no longer work
-
Sometimes, for no apparent reason, I lose a note in my notes application. This happens when I either have just opened a notes page or when next time I open my ipad, a note just isn't there anymore. It does seem to occur randomly i.e. independent of n