Talent Management successor pool reporting in BI 7.05?

Weu2019ve implemented Talent Management with EHP5 and are now working to implement BW reporting for Talent Management (PA-TM) with BI content 7.05. We have not implemented Nakisa.
For Succession planning, within the data source 0PA_TMC_2, it appears that this extractor doesnu2019t have logic to allow reporting for successor pools.  Weu2019ve assigned employees (central persons) in a successor pool assigned to a job family, but havenu2019t found a where these successor pools are reportable with the BI reporting.
There does exist logic within datasource 0PA_TMC_11 New Position Assignments which has logic for new position assignments to check whether the position holder was in a successor pool for any/the position(s) filled.
Does anyone know of a way to create reporting detailing central persons who are assigned to a successor pool within the delivered Talent Mgmt BI 7.05 content or is this something that SAP didnu2019t account for when building the reporting structures?
Thank you,
Becky Zick

Hi Becky,
You are quite correct that Successor Pools are not looked at and this is disappointing from my perspective. I don't know if you've read the SAP Help page on the analytics, but it is worth looking through:
[http://help.sap.com/saphelp_nw70/helpdata/en/49/c6e2da211149e2b40a7fa3c874d1da/frameset.htm]
I'm afraid I can't help with expanding the extractors, but hopefully someone else can. You might even need to raise the thread in the BW/BI forum if you get no answers after a couple of days.
Best regards,
Luke

Similar Messages

  • Talent Management - Change of Reporting Manager

    Hi all,
    I have changed the reporting manager relationship in SPRO: Talent Management and Development>Basic Settings>Specify Type of Reporting for Determining the Manager from INDIRECT to DIRECT (to A002 relationship).
    However, after the changes I am unable to view the manager's name under the talent profile header and also those employees with A/B 002 relationship in MSS talent assessment.
    Before the changes (with INDIRECT relationship), I was able to view the the manager in the talent profile header and employees under the manager.
    Are there any other configurations needed besides the above is needed for me to view the A002 manager and the relevant employees under him.
    Thanks in advance.

    Hi Eric,
    This is the only setting that you need to enable if you use S A 002 S relationships. I'm not sure why you don't see the correct reports and managers, so it could be down to an evaluation path (as suggested above) or it could be a bug. I would suggest raising and OSS message for some clarification.
    If you do that please post the solution you get from SAP here, since it will be useful for other users of the forum.
    Best regards,
    Luke

  • Talent Management Reports

    We are implementing SSHR Talent Management for our client. Client using Global HRMS.
    I have read the doc of Talent management and found some workbook reports such as Appraisal Detail Workbook and Competence Updates after Appraisal Workbook. I think we can use these reports by using HRMS Intelligence. Is it correct? We didn't setup HRMSi yet.
    Also the client needs the following reports related to this module. Since I don't know the columns of the above workbooks, I am unable to decide whether the following reports are come under standard one or need customization.
    So please advice.
    Appraisal Status by Employee-wise
    Appraisal Competencies & Development Plan
    Appraisal Competencies Count by Grade
    Appraisal Report by Competencies
    Appraisal Overall Ratings
    Appraisal Rating by Employee-wise
    Appraisal Status – Total Counts
    Probation Appraisal Report
    Disagreed Appraisal Report
    Performance Planning Status Report
    Planning Status by Department-wise
    Planning Status - Detailed
    Thanks in advance.

    " have read the doc of Talent management and found some workbook reports such as Appraisal Detail Workbook and Competence Updates after Appraisal Workbook. I think we can use these reports by using HRMS Intelligence. Is it correct? We didn't setup HRMSi yet."
    Yes you need seperate license to run the HR intelligence reportsI would say run the workbook reports in a development instance or in your vision instance and do the gap analysis.

  • EHP5 Talent managment spl  launchpad HRTMC/REPORTING configuration

    Hi Friends,
    Kindly let me known how the BI data are enabled via  launchpad HRTMC/REPORTING .
    While clicking Talent managment spl --> Reports Iview --> I am getting Error " The launchpad HRTMC/REPORTING doesn't exist.".
    Please your solution on launchpad HRTMC/REPORTING congfiguration.
    With regards
    Seranjeeve Kumar

    refer here
    http://help.sap.com/erp2005_ehp_05/helpdata/en/3f/6efcf555334d9e981c36e253dc2aec/frameset.htm
    http://forums.sdn.sap.com/thread.jspa?messageID=11079429&

  • Talent Management & Succession Planning

    Hi
    As part of the EHP4 functional upgrade of HCM core processes for Talent Management such as Succession Planning or talent development is getting switched on.
    Any input on the impact it will have on existing BI reports on succession planning which is based on ehp3 data model.
    (The latest talent Management and talent development BI content is available only in the release of EHP5 package)
    Thanks & Regards
    Venkat

    Hi Dinu,
    It sounds like a data issue. SP is probably reading the HRP1001 values but somewhere the data may have been corrupted or an object incorrectly deleted/unassigned. I would just delete the relationship in PP01 if not actual successor is assigned.
    Kind regards,
    Luke

  • Questions regarding risk register, resource pool, reports and KPI

    I am going on a requirement gathering activity today about a new MS Project Server project. I have knowledge of SharePoint but my knowledge of Project Server is very limited. Following will be my topic of discussion with client. Can you please tell me what
    kind of questions can I ask about them? I want to gather as much requirement as possible from client.
    Some of the question I can think of are:
    1. What fields will be there in each register?
    2. What kind of permission do you want on each register? For e.g. will each register will be publicly viewable to all users or not?
    3. How many KPIs and Dashboards do you need?
    Topics
    • Project Register
    • Issue Register
    • Risk Register
    • Decision Register
    • Invoice Register
    • Change Request Register
    • Deliverable Register
    • Resource Pool
    • Reports and KPIs

    As You know Project Server sits on SharePoint. If you know which version of Project server your client want.
    Then you can ask some question(I am giving you list of few question) like:
    1. Approx No of users 
    group and security related questions like which kind of permission they want for Project manager, team member, resource manager etc.
    2 Approx no of Project per year
    3. Avg no of task per project
    4. Project level Custom field
    5. Task level Custom Field
    6. Resource Level Custom field
    7. Project, resource or task level of custom view 
    8. Any demand Management workflow
    9. back up and restore strategy.
    10. any Issue or risk associated with project and mitigation plans
    11. drivers or strategy for Portfolio management 
    12. If any change need to be done in EPM environment how you guys can handle it. 
    13. for Delivery you can split your project in phases in which first phase will contain installation and basic configuration  then report development, then Custom development, then Training  and support
    14. which kind of report they want (SSRS, Excel baed, Performance point, dashboard, Power pivot)
    15. for reports what would  be the KPI 
    16. Tracking method, Timsheet usage, status Reports
    17. whether they will use default Project site or customized project site 
    18. Enterprise Project template for Business unit.
    19. Department specific reports.
    20 .for infra you can ask (Redundancy, server performance high availability )
    etc.
    Please group all these as per our need.
    kirtesh

  • Development Plans functionality in Talent Management

    Hello,
    We are planning to use the Development Plans functionality in Talent Management.
    But the Development Plan is not opening from MSS. (MSS -> Talent management -> Assessment -> Development Plan).
    I had created the Business partner object for all my test PERNRs and I had created a Development Plan Template (via IMG step in Talent management). I had activated the Business Functions and Services.
    When I open the Development plan in MSS, it is showing the names of employees (i.e. the reports of the manager). But when I click on an employee, it's not opening any development plan. Nothing is happening.
    Please help me,
    Thanks
    Raghu

    Hi Bharti,
    You must first delete the template names from the customizing tables where it is stored (under Talent Assessment node of Talent Management and Talent Development). Then you delete it under PHAP_CATALOG. Unfortunately you have created an databse inconsistency and you might need to see if Basis can delete the values from the table.
    Best regards,
    Luke

  • TREX - Search Talent Management

    Hi All,
    I know that there are many threads on the TREX and have looked at all of them and tried some of the things but i still get the error search not available.
    We have created all search connector in the admin cockpit and have indexed all of them with no errors. All 32 of them are active. I then ran report ESH_TEST_SEARCH to test the searches. All of the objects templates return results except the following:
    HRTMC_AES_DOCUMENTS
    HRTMC_AES_ELEMENTS
    HRTMC_AES_TEMPLATES
    HRTMC_AUTHORITY_VIEW
    HRTMC_CENTRALPERSON
    HRTMC_FUNC_AREA
    HRTMC_JOB
    HRTMC_JOB_FAMILY
    HRTMC_ORG_UNIT
    HRTMC_POSITION
    HRTMC_QUALIFICATION
    HRTMC_REL_CP_JF_744
    HRTMC_REL_CP_Q_032
    HRTMC_TALENT_GROUP
    For most of these templates I get the following error:
    Search Engine Error 29 for DHR310HRTMC_FUNC_AREA : attribute not defined for physical index;index esh:dhr310dhr310hrtmc_func_area~functional_areayy has no attribute 'objid'.
    For the HRTMC_AUTHORITY_VIEW i get no results, it comes back no values and has a yellow traffic light in the Log viewer. In the Job Log in the Admin Cockpit i see the following
    31.05.2011 21:54:23 Object connector DHR310HRTMC_AUTHORITY_VIEW: New status: Indexing
    31.05.2011 21:54:23 The implementing class does not support the iterator by time interface
    31.05.2011 21:54:23 Implementation did not provide any data -> exit indexing
    31.05.2011 21:54:23 Object connector DHR310HRTMC_AUTHORITY_VIEW: New status: Active
    31.05.2011 21:54:23 Job finished
    I also activated BADI HRTMC_AUTHORITY_VIEW_DELTA in the IMG and ran report RPTMC_CREATE_CHANGEPOINT_AUTH. I then scheduled ESH_IX_PROCESS_CHANGE_POINTERS for the HRTMC_AUTHORITY_VIEW, hoping the I would be returned with some results.howver
    I do have a TMS linked to several org units via relation 741 and this is returned in the test search HRTMC_REL_S_O_RESP. In addition if I go to a Talent Review Meeting in the portal and click on 'ADD' to select an org unit, the managers of the Org Units that I am related to appear on the list. However as soon as I select any of them, they are added to the participant list but non of the nominated talents appear, i get the following message:
    'No nominations are displayed since the search is not available'
    for all other searches i get the error 'Search is not available' or 'No Relevant Records Were Found for This Search'
    I Also checked SLG1 logs after attempting the searches and got the following errors:
    2007 for DHR310HRTMC_CENTRALPERSON : NameServer error: no servers found; IndexId:esh:dhr310dhr310hrtmc_centralperson~~sap_talent
    Exception occurred in program CL_ESH_IF_SEARCH_RESPONSE=====CP, include CL_ESH_IF_SEARCH_RESPONSE=====CM006, row 4
    An exception has occurred
    29 for DHR310HRTMC_CENTRALPERSON : attribute not defined for physical index;index esh:dhr310dhr310hrtmc_centralperson~personal_datayy has no attribute 'objid'
    Exception occurred in program CL_ESH_IF_SEARCH_RESPONSE=====CP, include CL_ESH_IF_SEARCH_RESPONSE=====CM006, row 4
    I also tried creating my own serch request using one of the search templates returning results. In this case i used the HRTMC_REL_CP_TB_743 templates with talent group ID as search field and assigned it to one of the search configurations. I then however got the following error.
    The following error text was processed in the system DHR : The ASSERT condition was violated. The error occurred on the application server sivrs106_DHR_00 and in the work process 0 . The termination type was: RABAX_STATE The ABAP call stack was:
    Method: GET_AUTHORIZATION_QUERY of program CL_ESH_IF_SEARCH_REQUEST======CP
    Method: SEARCH_ONE_CONNECTOR of program CL_ESH_IF_SEARCH_REQUEST======CP
    Method: SEARCH of program CL_ESH_IF_SEARCH_REQUEST======CP
    Method: CONSTRUCTOR of program CL_HRTMC_SEARCH_REQUEST=======CP
    Method: GET_INSTANCE of program CL_HRTMC_SEARCH_REQUEST=======CP
    Method: TRIGGER_SIMPLE_SEARCH of program CL_HRTMC_AC_SEARCH============CP
    Method: ONACTIONSTART_SEARCH of program /1BCWDY/JUNQ9FJYULV16JASJHWU==CP
    Method: IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER of program /1BCWDY/JUNQ9FJYULV16JASJHWU==CP
    Method: INVOKE_EVENTHANDLER of program CL_WDR_DELEGATING_VIEW========CP
    Method: IF_WDR_ACTION~FIRE of program CL_WDR_ACTION=================
    Anyone have any ideas on how i can resolve this.
    Apologies for posting such a long thread, just trying to provide full picture.
    Regards
    Imraan

    Hi Imraan,
    You should be congratulated on a thorough post! What version and revision of TREX are you using? You should use TREX 7.1 revision 16 or higher. You should also review the PA-TM SAP notes for TREX. I would recommend reviewing some of the following (some you might need to come back to later):
    u2022     1376055 - ESH_ADM_INDEX_ALL_SC: Exception in step 2: Create
    u2022     1384953 - ESH: Error message 'A connection already exists' in cockpit
    u2022     1437946 - TMC search: Frequently asked questions
    u2022     1441190 - Error in model assignments to logical system
    u2022     1457940 - Transporting software components: Error in after-import
    u2022     1476894 - Transporting software components: Paths are lost
    u2022     1483890 - Importing software components directly to target client
    u2022     1492752 - Program to create a join index retroactively
    u2022     1502296 - Too few ESH_OM_LOGSYSA entries after creating a connector
    u2022     1538688 - Indexing Log: Warning "Object 'nw_esh_tst_auto' not ..."
    u2022     1516237 - TMC search: Long runtime for indexing of HRTMC_REL_S_Q_031
    u2022     1518396 - Indexes are not filled after TREX conversion
    u2022     1520538 - TMC search: Performance for extraction of documents
    u2022     1523648 - The search does not find any hits
    u2022     1526710 - TMC search: Error during position switch by TMS
    u2022     1529878 - Performance of authorization indexing
    u2022     1534172 - TREX 7.10: Revision 42
    u2022     1536663 - TMC search: Long runtime during indexing HRTMC_REL_SC_JF_FN
    u2022     1536656 - Missing search attr for person search in Succession Planning
    u2022     1540869 - TMC search authorization indexing with initial user ID
    u2022     1541984 - Search connectors are not found
    u2022     1542741 - Deleting connections
    u2022     1550964 - TMC srch: Qualification srch criteria for CP-Q relationship
    u2022     1551029 - TMC: Incorrect authorization check for PA infotypes
    u2022     1554061 - TMC search: Error in search fields for job evaluation
    u2022     1555950 - Indexing of HRTMC_AUTHORITY_VIEW: Data packages are too big
    u2022     1558355 - TMC search: Empls. that have left company in search result
    u2022     1560966 - TMC search: Error message when copying search configurations
    u2022     1561070 - Termination when saving after deleting system assignments
    u2022     1562742 - TMS / Search: Indexing fails with HRTMC_REL_S_MANAGER
    u2022     1568563 - TMC search: Error when setting up authorization index
    u2022     1567065 - TMC search: Simplifying the authorization indexing
    u2022     1575454 - TMC search: Performance during CP indexing
    u2022     1584309 - TMC search: Change pointer for newly created org. units
    Also, did you follow these steps once TREX was connected?
    [/people/luke.marson/blog/2010/09/20/setting-up-netweaver-embedded-search-trex-for-sap-ehp4-talent-management]
    Best regards,
    Luke

  • E-recruiting - Talent Management Relationship

    Hi,
    we want to add search functionality to talent management relationship in our e-recruiting solution.
    Search must sort on ***, female and male. Does anyone know how to customize this and what prerequisites is needed.
    e-recruiting is running eh4.
    kind regards,
    hilde

    Hello,
    unfortunately there is no easy way to tidy up a complete e-recruiting.
    While for pure HR components there is a way to clear all infotypes through a report SAP once delivered to get rid of database entries which were accidently transfered with a client copy including customizing tables (all infotypes are for any reason type C tables), the business partner integration of e-recruiting blocks that way.
    Also doing it manually is not easy, e.g. deleting a requisition can only be done for requisitions marked "to be deleted" and this is only possible in the manager scenario.
    We once developed a report to clear a complete e-recruiting system without touching process supporting data like process templates or questionaires for a customer who tested on production to ensure propper set up and a then wanted to clear everything. This took quite some days to get this right - unfortunately I cannot hand this out, I hope for ur understanding here.
    Of course you can try to develop such report on your own. Other way would be a new system setup with importing all transports you did so far. Or third just clean up what really bothers ongoing project.
    For a production system I would go for new setup. In best case there is a data recovery possible you only have to import the transports. Developing an own report might take you longer than this.
    If it is only the dev system I would get rid of all things which could disturb my developments by throwing dumps or slg1 entries. If it is only dev full cleaning is not always necessary. But of course this need quite profund knowledge of the application and the project itself.
    Sorry that I cannot offer an easy solution for this problem.
    Kind Regards
    Roman

  • Talent Management-RePublishing Plans

    Hi Everybody,
    I'm unable to re-publish the plans in Talent Management, as it says that there are broken supervisor hiearchies which need to be fixed first. I ran a report and found three employees with broken hierarchies, all three employees are terminated, so I've excluded them from the system by adding them to the Eligibility Override EIT. Normally when I do that, it fixes the problem and I'm able to re-publish the plans. However, this time it hasn't worked and the employees in question are still appearing as having broken hierarchies. Can you please investigate and see if it is in fact these three employees causing the problem and if so, why the system is ignoring the fact that I've excluded them in the EIT. Any help would be appreciated. Thanks.

    I'm not technical, so can't comment on whether the SQL is correct. But, you can set objectives outside of the appraisal period, so your objectives might not yet be connected to a specific appraisal. Does your SQL allow for this?

  • Talent Management in OBIA 7.9.6 - HR Analytics

    Hi all,
    I am aware that OBIA 7.9.6 HR Anayltics module has a few dashboards for Talent Management but I am not sure what those dashboards/reports are.
    I can see Performance Management / Workforce Profile/ Absence / Retention.
    Also I observe that " Workforce Development " dashboard description says that it is key talent management initiative. Is that all?
    Please help me as I am completely new to OBIA.
    Thanks.
    Edited by: user10682075 on Jun 30, 2011 12:41 PM

    Check this http://www.rittmanmead.com/2010/12/oracle-bi-ee-11g-managing-host-name-changes/
    if helps mark
    ~ http://cool-bi.com

  • Searching for dashboard Talent Management in OBI APPS

    Hi All,
    I have question to the Gurus that I am searching for Talent Management in OBI Apps Human resource , is it available in 7.9.6 version because we have 7.9.5 and it is not there in that ?
    Thanks for quick response,
    Amol

    Hi Amol,
    We have downloaded and setup the BI Apps to see what they are all about. I personally exported a report of all the requests in the latest version, 7.9.6, and there is nothing affiliated with "talent".
    Hope this helps. Please award points if you find my research helpful.
    Best regards,
    -Joe

  • Talent Management - Appraisal

    Hi,
    I have created a plan with the following tasks:
    Objective Setting : 01/01/2008 30/06/2008
    Mid Year Appraisal : 01/07/2008 15/07/2008
    Mid Year Objective Reviewal : 01/12/2008 20/12/2008
    Final Year Appraisal : 25/12/2008 31/12/2008
    Assume that, I completed the Objective setting and Mid year appraisal. But during objective reviewing (employee updating existing objectives and adding some objectives), whether the employee can see all the objectives which were appraised during Mid Year Appraisal or not?. (The reviewed objectives will be used in Final Year Appraisal.)
    Thanks in advance.

    TimW wrote:
    Objective setting and appraisals cannot be open at the same time. So, if you want to continue updating objectives you have to reset the objective setting period after the mid-year appraisal. However, as long as the mid-year and end-year appraisals are part of the same plan, you can continue to see the objectives from the first part of the year.
    If objectives are not completed in the first year, they can be carried forward to the next year if you define the 2nd years plan as being linked to the first year.
    Be careful, because there have been many reports of problems in this area!  Lots of patches have had to be applied around this functionality.  I would advise making sure that you have all the Talent Management rollup patches.
    Regards
    TimHi Tim,
    We are implementing a scenario almost exactly like the thread describes and we are already having issues. Please can you point to us where to download all the Talent Management Rollup patches so that we can have a stable system. Thank.
    -Regards,
    Ibrahim

  • Issue in creating dev plan in talent management specialist role

    Hi ,
    I am facing issue in creating development plan through talent management specialist role . Actually in one system I have 2 location one is india & another one is USA . its working for india but when I search india employee its show no employee found . can you please guide me
    Tarun

    Hi Luke ,
    According to one of your article , I run  HRALXSYNC in r/3 , in that all indian employee are green but USA employee in RED . I found following error , can you please guide me that what is mean by that ?
    The error occurred in program CL_HRRCF_INFOTYPE=============CM003 line 117
    Qualification 90007487 does not exist
    The incorrect HR object has the key 01NA90011026
    The incorrect infotype record is 40601NA900110265105    1  1900010199991231
    The error occurred in program CL_HRRCF_QUALIFICATION========CM001 line 69
    Serious error; see log
    The error occurred in program CL_HRRCF_CANDIDATE_INFOTYPE_BLCM00B line 99
    Serious error; see log
    The error occurred in program CL_HRRCF_INFOTYPE=============CM003 line 117
    Qualification 90007487 does not exist
    The incorrect HR object has the key 01NA90011026
    The incorrect infotype record is 40601NA900110265105    1  1900010199991231
    The error occurred in program CL_HRRCF_QUALIFICATION========CM001 line 69
    Serious error; see log
    The error occurred in program CL_HRRCF_CANDIDATE_INFOTYPE_BLCM00B line 99
    Thanks
    Tarun

  • Issue in EHP5 Talent Management (Team Goals) Cascade goals functionality

    Hi Friends,
    Issue in EHP5 Talent Management (Team Goals) Cascade goals functionality.
    Under Team Object While try to cascade goals, it pop-Up Warning Msg u201CChoose Save to save the goal in the employee document. The goal can no longer be deleted, only set to obsoleteu201D.
    If we click Ok to proceed further, I am getting error stating u201CYou have made no selection" and " No appraisal template defined ".
    Same functionality is working fine in u201CPerformance Management (Predefined)u201D
    With Regards
    Seranjeeve Kumar

    Please  set the parameter PROCESS "PMP" in the iview configuration.
    ie
    ROLE_ID=PA&PROCESS=PMP in application parameters
    content provided by SAP ->
    specialist ->
    Talent management Specialist ->
    iViews ->
    COmpany goals etc
    and you can confirm using this
    CL_HAP_CASCADE_GOALS > meth0d GET_VALID_APPRAISAL_TEMPLATES
    The parameter mentioned in the note 1457057, the one that you enter in
    transaction SE80 is the default value. However, if you call application
    with parameter PROCESS=PMP then the PMP process for cascading goals will
    be used.
    check note  1523527

Maybe you are looking for