Target agreement form: actual business result comparison

Hello SAP-community,
I build a "target agreement form" in the catalogue for employee appraisal, I was testing with the crevices "actual numbers", "target numbers", "weight", "target agreement".
Question is: How can I calculate the level of achievement in percent of the actual business results in comparison to the target numbers? For example I got a target business number set 1.000 and I paste an actual business number 2.000, the level of achievement of 200%, in this case, is what I want the program to calculate. I also tried this with the crevice "percentage score", didn't succeed.
I uploaded some images of the modifications I made in the catalogue, I translated the inter-face with all its fields into english, so please excuse possible discrepancies to the english surface of SAP ERP, its just because I use the german version.
Here are the images of my settings on the level of category and criterion:
http://img145.imageshack.us/my.php?image=categoryos6.jpg
http://img256.imageshack.us/my.php?image=criterionks5.jpg
I would be thankful if someone could give me hints how to regulate the values and all kinds of needed settings for this calculations.
Thank you very much.

noone any idea? pls help needed..

Similar Messages

Reg: Schedule agreement form

hello experts,
when i delete or change any line item from ME32L for schedule agreement form it will show the form in spool that line item was deleted. actually this is happening for (standard form: medruck and prog: sapfm06p). but i want to debug that form how it is showing the form with particulars of that item. when i keep break point in sapfm06p it's not stopping. the same logic i have to implement for my Z prog.
can u tell me anybody how can i debug that form.
thanks in advance.

hi pammi,
To debugg a sapscript v can use the standard program --> RSTXDBUG.
Otherwise u can activate using SE71 --> Activate debugger.
Regards....
Arun.
Reward points if useful.

To Get Busines Agreement Class and Business Agreement Number

Hi Experts
We need to find out Business Agreement Class and Businees Agreement number from Business Partner.
we have CRM Contract, CRM contract can have different line items which is stored in crmd_orderadm_i table. How can I use Product Guid to find out business agreement class and business agrement number.
Thanks & Regards
Sandeep

Hi
U can find these in the Master Table
CRMM_BUAG Master table for Business Agreement
CRMM_BUAG_H Header Data for Business Agreement such as Tax Category, Tax Characteristic, Form key, Business Agreement Class. Data in this table correspond to ISU
Regards
Manohar

I have an agreement form created in word doc. i want to hire some one experience with formscentral to recreate the form and user be able to complete the agreement, sign it electronically (using echosign) then click submit. i will be alert of new response.

i have an agreement form created in word doc. i want to hire some one experience with formscentral to recreate the form and user be able to complete the agreement, sign it electronically (using echosign) then click submit. i will be alert of new response. can someone connect me to where i can talk to someone can provide this service. i have sample of agreement form

Hi c3 cyber club,
Unfortunately FormCentral and Echosign are two different services and forms created in Forms central can only be submitted via and to Forms Central.
We cannot have the form filled in using FormCentral and get it signed using Echosign.
However, you can use Echosign directly and you can get most of the functionality.
Thanks,
Vikrantt Singh

Target cost and actual cost not picking in production order

Hello,
The target cost and actual cost is not updating in production order when I display it in CO03 in cost analysis.
Even though we have maintained planned price in KP26.
Please suggest how it can be populated.
Best Regards,
Tapan

Hi Tapan
For Target cost
1. Your std cost must be released before Goods Receipt
2. There must be goods receipt posted on the prod order
3. You must calculate variances in KKS1/2
For Actual Cost
1. Post Goods receipt and Goods issues
2. See if any mat movements are pending in COGI
3. Ensure that operation is confirmed in PP and no entry is lying in COFC
Regards
Ajay M

ITunes Agreement Form comes up and freezes! HELP!!!

Hi
I just got my ipod nano today and i've been trying to get it installed since 12:00 this christmas morning and i really tired of dealing with it and i need help bad. I installed the ipod nano update thing, the itunes and the quicktime player and everything but every time i put in the 2.0 cable connect it to my ipod and open the itunes icon it always freezes right on the agreement form and i cant do anything!!! Can somebody plz HELP ME!!!!
Windows XP

Yep, same here. My dad's about to blow a fuse. He's been on my computer literally all day trying to make it work. What a lousy way to spend Christmas day....
Seems like we're not the only ones with this problem....

Composite form and business rules

I have combined two planning forms into a composite form.
The two planning forms have business rules associated with them with the action to execute upon save.
I don't see it clearly in the documentation but I am assuming when the users use the composite upon save the composite will execute the rules associated with the planning forms? Or do I have to establish the business rules on the composite?
JTS

I'm running 11.1.1.2. I have a composite form made up of two forms, one of which has a rule associated with the save. When I save the composite form, it runs the rule associated with the "sub" form. (There are no rules associated with the composite form itself.)
It looks like you should be able to do this either way - associate the rule with the composite or with the sub form. I've got them associated with the "sub" forms, just in case someone accidentally runs the sub-form instead of the composite.
- Jake
Edited by: Jake_Turrell on Oct 14, 2009 10:35 AM

Can I style Web Forms Confirmation Page Results - Specifically the "ERROR" message in the results?

Hi,
Can I style Web Forms Confirmation Page Results - Specifically the "ERROR" message in the results?
{module_webformresults} is auto rendedered as a table with CSS IDs attached but nothing specific for the ERROR message - resulting in the error not being seen.
The ERROR is triggered by a dulplicate User Name or Password.
I tried using a JQuery text selector, but it does not work with the results for some reason.
Any ideas?
Attached is are the error results, see Username
Thanks!
P

Hi Patrick,
It should work. You know the id of the specific area, you know what string to search for in order to condition the appearance of the new message.
Kind Regards,
Alex

Huge Variance between Target cost and Actual Cost

Hi,
In Product Costing,I am getting Huge variance between Target cost and Actual Cost.It is showing the Target Cost as ZERO.Why i am getting this target cost as Zero? what could be the reason? Kindly help me in fix this issue.
Thanks
Supriya

Dear,
First do the GR final DEV for Production order
You need to do the variance calculation in KKS2, then when you save the variance, the target cost is calculated.
Target cost appear after GR. And you will get the Variance also right.
Please try and come back.
Regards,
R.Brahmankar

Target Cost and Actual Cost

Hi All,
When is the target cost and actual cost gets populated and from where does the data comes from liek labour,machine,overhead cost comes?
Thanks in advance

Dear Friend,
speaking from controlling point of view, target and actual costs will be flown from "costing variant planned" and "costing variant actual" respectively.In above mentioned varinats, whats the process has to be followed to calculate material costs,activty costs,overhead costs etc will be defined. These variants will be assigned in order type dependent parameters OPL8.
Target Costs - In standard cost estimate(ck11n),target cost will be calculated in the following way
                          -material cost from material master and BOM
                          - activity costs from routing( for this u need to plan the activity costs in KP26)
                          - other costs from the definitions of planned costing variant.
                   - after running the standard cost estimate,u need to mark n release(ck24).
Actual Costs - material costs frm goods issues (via goods mvmts thru MBIA,MB1B etc) against
                      production/process order.
                          - activity costs(as per the price u plannned in KP26)through operation confirmation in
                            COR6N/CO11N.
                          - any other costs like overheads,cost center issues etc as per the process defined
                            in 'actual costing variant'.
Hope this will clear your doubt.
Rams.

Recurring iPod Software License Agreement Form

Ok so it keeps popping up everytime I click the iPod icon under devices in iTunes. I also can't scroll to the edge of the page to read half of what it says on the license sheet. Also, none of the music options show up like in the tutorial, when I click the iPod icon under devices. This is really driving me nuts, because I want to delete some songs from my iPod, but I can't, because I can't even get to the music! It shows what is downloaded on iTunes, but not what's on the iPod. I currently have my sync settings on manual, but I can't find the option to change that either, if it would help anything. How do I get the software license agreement form to go away??!?!?! ACK!!!

I am having the same problem that you had and i can not figure out anyway to fix it...i need to restore my ipod and i can't because of that agreement thing....please help me...im begging you...haha...i am about to just give up and seel it and let someone else have the problem...i am using a windows xp...
thank you so much...

HP ProDesk 400 G1 Small Form Factor Business PC using vga and dvi at the same time.

Looking into purchase a HP ProDesk 400 G1 Small Form Factor Business PC which has a VGA and DVI-D ports on the integrated video card. Can you use both ports simultaniously. one screen connected to vga and a 2nd monitor connected to the DVI port?

Hi,
You might get better assistance on the HP Enterprise Business Forum.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Valuated WIP at Target Cost or Actual Cost

Hi,
In a production order, how do we valuate it at target cost or actual cost?
Thanks,
Teo

Hello Sir ,
As per sap wip is valued at actual cost only.
Thanks & Regards
A.V.J .Krishna Reddy

Form central - business catalyst - e commerce problem

Hi all
We have a few websites and have been using form cental to create contact us forms, gift voucher ordering, and event booking/payment through paypal for these sites.
I thought that any results we got (ie names and email addresses) would be going directly into the business catalyst mailing lists so that when we send out a newsletter, those new enquiries and customers get it.
But Ive now realised there is no link between the too (frustrating)
So Im now wondering why i even need to be paying for form central.
Can I do all of that in business catalyst?
Also I tried to find out how to upgrade my BC to include ecommerce (since Im assuming I cant may gift voucher order forms and link to paypal with BC webmarketing plan)
I eventually found you have to go to BC: Site settings >Site management> and then there is supposed to be an option that says upgrade... but the only option it has is 'delete'!
Getting a bit frustrated, so Im hoping someone can give me a hand on this one. :-)
Brian

This forum is actually about the Cloud, not about using individual programs
Once your program downloads and installs with no errors, you need the program forum
If you start at the Forums Index http://forums.adobe.com/index.jspa
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says ALL FORUMS) to open the drop down list and scroll
http://forums.adobe.com/community/formscentral
http://forums.adobe.com/community/business_catalyst

SAP Cloud SDK : Creation of Form using Business Object Error

Hi Experts,
I have created custom business object with object based screen and i want to create form for this custom business object.
I have tried using this.
Step 1. Right Click on Business Object and select Create Form option.
Step 2. Enter the require information and click on Next
Step 3. Select the element from the business object you need to display in the form
Step 4. Select the default language English and Next and Finish it,
After finish it the form open in adobe reader automatically but i am getting error as shown below.
and In the solution explorer i can see this.
Can anyone help me why it display the error while open the newly created form.
What are the software i need to install or add-ons in my system to open the from or remove this error.
I have installed the Adobe Life Cycle Designer For SAP Business ByDesign 135.0XXX, Adobe Reader X(10.1.3) , SAP Business ByDesgin Add-In Adobe Life Cycle designer.
Kindly any software missing or any add-ons require to be install or upgrade?
Many Thanks,
Mithun

Hello Alessandro,
I have solved the multiple line display in the table.
I have issue to display the no of character in the table.
I have Create custom business object and create the form i am using the TectCollection type in table level in businessobject node.
Case 1. This is my Entry1 in the business object and it display as shown below.
Here in the table "Undefined Text" is my 1000+ character text.
When i click on preview button the data display under the PDF as shown below.
Here the above screen we can see that the data comes perfectly in the PDF without missing data in table level.(Please i have not rename the columns name).
Case 2. When i Create new entry 2 and enter the multiple lines into the table as shown below.
Here in the above screen we can see that i have multiple row under the table.
When i click on preview button the PDF display with all the line under the table but the data is missing under the third column as shown below.
Here above screen display the same result but the in the yellow highlighted part full data not display as previous case 1.
Why the full data display in Case 1 and not in Case 2?
Is there any configuration to display data ?
Also i can not change the property of the page in form to "Allow Page Break with Content" this option is disable.
Kindly suggest me what is wrong in this PDF design.
Regards,
Mithun

Target agreement form: actual business result comparison

Similar Messages

Maybe you are looking for