Tascam US-600 Device none found. On PC it works perfectly, WHY???

Hi, I received a USB Interface/MIDI Tascam US-600 for christmas and I want to use it on my MacBook Pro 13" (OSX Lion 10.7.5) BUT, after installed the driver, reboot... I opened the panel control and showed this message : DEVICE NONE FOUND.
And when I tested it on my PC, it perfectly works, WHY?
Microsoft better than Apple for professional? HAHA joke.
Please give me an answer...

Elric_Brothers wrote:
Hi, I received a USB Interface/MIDI Tascam US-600 for christmas and I want to use it on my MacBook Pro 13" (OSX Lion 10.7.5) BUT, after installed the driver, reboot... I opened the panel control and showed this message : DEVICE NONE FOUND.
And when I tested it on my PC, it perfectly works, WHY?
Microsoft better than Apple for professional? HAHA joke.
Please give me an answer...
Tascam provide Mac drivers for all versions of OSX up to 10.8.2 (current) why don't you read the manual and download the correct drivers.
Here is a link to the downloads,

Similar Messages

I purchased CS6 in 2013. To day non of the programs will work. why

This is maddening. I can not do my work what is going on?????

Hi joanneda
Your serial number expired in December so is no longer valid.
Usually these type of licenses are provided to educational users so please contact your educational establishment or the reseller that you obtained the product from for further assistance.
Kind regards
Bev

'No device drivers found' error Windows 8.1 - Windows 7 downgrade installation

Hello,
There are numerous threads with the same issue online, but none of the solutions have worked for me, so I'm posting my own. I did contact Microsoft and Lenovo, but Lenovo is asking for money that I can't afford for tech support, so I'm hoping someone here
can help me out.
Here's the situation:
I have a Lenovo Y510P that came with Windows 8.1. Half a year later, I'm sick of 8.1 and want to downgrade to Windows 7 (I know that simulation softwares like ClassicShell and such exist, but I would really rather just use Windows 7).
I downloaded a legitimate copy of Windows 7 Ultimate 64-bit and burned it onto a DVD disk.
I also downloaded all of the Windows 7 device drivers from this Lenovo site: http://support.lenovo.com/us/en/products/laptops-and-netbooks/ideapad-y-series-laptops/ideapad-y510p-notebook?TabName=Downloads
^I had to specify the model number and OS, so I'm hoping I downloaded the correct drivers (all of the drivers are .exe format, is that what it's supposed to look like?)
I put all of the drivers onto a flash drive.
So, I am now equipped with a DVD with Windows 7 on it as well as a flash drive with all of the drivers on it.
I boot from the disk with the DVD and flash drive attached. Windows 7 installation begins and here I get the error, 'no device drivers found.' When I click 'browse', I see that the flash drive is recognized, but the files on it aren't.
What do you guys think the issue is??
Best,
anon27

Hi,
How do you installed Windows 7 on that Machine? Is the machine UEFI based?
We may follow the below article to install Windows 7 64 bit on UEFI based computer:
Installing Windows 7 on UEFI based computer
Besides, when did you received the error message“' no device drivers found.“ ?
For the device drivers, we'd better make a contact with the manufacturer to check if we have the proper drivers available.
Best regards
Michael Shao
TechNet Community Support

HP 3050A : Device Not Found on Network

Hi,
Laptop Model: MacBook Air
Operation System: OSx Lion 10.7.3
Printer Model: HP 3050A
Router Model: Linksys WAG160N
WiFi Security Protocol: WPA
TCP/IP IPv4 Protocol: DHCP
Firewall Software: None
I have manage to connect the printer to my WiFi network as the blue indicator is ON and got an IP 192.168.1.104 with Excellent signal strength on the printer. But when follow the HP Setup Assistant I unpluged the USB then I got stuck with the following error message:
Device Not Found on Network
The wireless network settings were successfully downloaded to your device. However, your Mac was unable to locate the device on the network.
Please make sure that:
• Your Mac is connected to a wired or wireless network that has access to your device.
• Your device is connected to the wireless network "speedy".
Click "Retry" to attempt to connect again using the current settings. Click "Go Back" to enter different settings.
I also tried to ping the printer IP but no success
Aliss-MacBook-Air:~ ali$ ping 192.168.1.104
PING 192.168.1.104 (192.168.1.104): 56 data bytes
Request timeout for icmp_seq 0
Request timeout for icmp_seq 1
Request timeout for icmp_seq 2
Request timeout for icmp_seq 3
ping: sendto: No route to host
I am able to print using USB without any problem, but the WiFi never success! Please help!
Regards

Hello,
Thanks for the post. With this one, we may a couple of issues. I've included a link below with some excellent information regarding network connectivity. I might suggest that we start there and try to determine if it's the printer, the MAC or the network. Good Luck!
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02731071&tmp_task=solveCategory&cc=us&dlc=en&la...
I worked for HP but my posts and replies are my own....Thank you!
*Say thanks by clicking the *Kudos!* which is on the left*
*Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

Boot Device Not Found Error Message

I've had my laptop since May 2011. HP Pavilion dv6
Quad-Core AMD Phenom II 2.2 GHz
DDR3 SDRAM 8 GB
500 GB Serial ATA 7200 rpm hard drive.Originally Windows 7 64-bit upgraded to Windows 10 64-bit One morning I turned on my laptop and I received the following error. The laptop lives on my desk, hasn't undergone any major changes, and I haven't moved or dropped it. I've run every diagnostic test from the F2 menu. The hard drive and memory both passed, the system tune up passed, and I've restored the BIOS to the default settings with no changes. If I hold the power button and restart the laptop usually on the 2nd or 3rd attempt the system will start normally with no issues and continue on as if nothing is wrong. This is a helpful work around but it doesn't solve the problem which is a bit of an annoyance and leaves me worried that eventually it might refuse to start at all. Thinking that a system restore might help I ran a recovery and brought it to an "out of the box" state. After that failed I decided to go ahead and upgrade from Windows 7 to Windows 10. I performed a clean install keeping none of my programs or personal files. Despite a successful Windows 10 install I still receive the same error every time I restart. The short version:When I turn on my laptop I encounter a Boot Device Not Found Error Message.My hard drive passes diagnostic tests.My laptop will start eventually if I continue to power cycle it.

@pkharel ,
Hello and thank you for posting on the HP support forums. So that I can better help you here with this hard drive issue . Can you explain what diagnostic you ran on the hard drive.
Did you run the diagnostics from the BIOS?
HP Notebook PCs - System Diagnostics (F2)
HP PC Hardware Diagnostics
If you have attempted the diagnostics from the BIOS and are not finding the Hard drive. See if you can find the hard drive in another computer. If you can not find it using another computer replace the drive. If you can and it is not located on your notebook then you have a possible issue with the motherboard.
First thing I would do is try and restore your BIOS first.
Restoring the BIOS
After attempting this and you still can not find the Hard drive and you can see it in another system please contact HP phone support for repair options.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
If the hard drive is not detected in another system then replace hard drive.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP

Time capsule device not found

I have a recurring problem backup failed and device not found.
I have been on to apple told pull the plug on time capsule every time.
now i am told to go into network and take it of automatic and set it to 2.4 to channel 11 and the 5 to channel 44.
is this now limiting the time capsule to the 2 channels.
is this the best result for the time capsule or would i be better getting a non apple product.

the phone has been switched of and unplugged
just checked my Time Machine and its missed backups again.
I go into airport utility yet again its missing the time capsule.
I am sorry, but Yosemite is doing its thing.
So much for Apple blaming my cordless phone.
Apple has to find something to blame, since they will never blame themselves.
have a program from the app store wifi checker.
running it looking at the wifi signal in my area I have 2 main accounts with 2 different BSSID the last letter different on each.
I also had for a bit 3 guest accounts 2 with the same BSSID and 1 different BSSID there is another wifi account not mine with the same BSSID as this 1.
This all sounds normal.
I am afraid that all you can do is wait for the next Yosemite update to see if it will fix some of these issues.

Will Garageband on an IMAC with OS 10.7 work with a Tascam us-600 USB audio interface

I need a USB audio interface to read in DAT tapes from a Tascam DA20 recorder. I want to use the S/PDIF digital output from the recorder. Has anyone used the Tascam US-600 with the IMAC and Garageband? Any other recommendations for a USB interface that will accommodate S/PDIF as well as XLR Mic inputs for under $200?

Been there, done that.
I can select the device (US-144), but I do not get any choice for the output channel. The default is to go the analog channel ( channels 1 and 2).
However - I did find a workaround. There is an opensource package called Soundflower:
http://code.google.com/p/soundflower/
From the description:
"Soundflower is a MacOS system extension that allows applications to pass audio to other applications. Soundflower is easy to use, it simply presents itself as an audio device, allowing any audio application to send and receive audio with no other support needed."
This allows me to set the output channel for garage band (and any other app, e.g. itunes) to the digital S/PDIF output.
It would be nice if this functionality was built in to Mac OS X...
Warren

Start-up problem with hp pavilion dv6t-7000‏: "Boot Device Not Found. Hard Disk (3F0)" error

I started getting start-up problems with my hp pavilion dv6t-7000‏. It happens intermittently.
The boot error is:
Boot Device Not Found
   Please install an operating system on your hard disk.
   Hard Disk (3F0)
   F2 System Diagnostics
   For more information, please visit: www.hp.com/go/techcenter/startup
Could a faulty BIOS update cause this problem?
Anyone else who may have experienced a similar problem?
I'd appreciate any help about this problem. Thanks.

Hi
Please find the link given below might help you to fix your issue.
Resolve Boot Device not Found Error Message
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

First off, i think it's sad that i have to use my non apple device to post this question... Why has my iPad become absolutely useless after updating to iOS 8.1? I am unable to use my mini because it crashes, slow performance, major battery drain.

First off, i think it's sad that i have to use my non apple device to post this question... Why has my iPad become absolutely useless after updating to iOS 8.1? I am unable to use my mini because it crashes, slow performance, major battery drain.

Restore iPad to Factory Default; do not restore from backup. It may be the cause of the problem.
Settings>General>Reset>Erase all content and settings

How can I sync my calendars on the MacBook Pro, iCloud, iPad and iPhone? Since upgrading to the newest OS on each device, none of the calendars sync. Any suggestions?

How can I sync my calendars on the MacBook Pro, iCloud, iPad and iPhone? Since upgrading to the newest OS on each device, none of the calendars sync. Any suggestions?

Hi silverk,
Welcome to the Apple Support Communities!
I understand the need for all of your calendars to be up to date across all of your devices and how frustrating it can be when they are not syncing as you would expect. In this situation I would suggest reading over and using the attached article for troubleshooting.
iCloud: Troubleshooting iCloud Calendar
Have a great day,
Joe

T410 bluetooth device NOT FOUND

Hello Everyone,
I have a t410, product id is 2539AJ6 (bluetooth included), running Windows 8.
however i can't get bluetooth to work, in addition it seems like there is no trace for a bluetooth device on this computer:
- Can't install driver ("Device not found").
- Not Recognized by Windows 8.
- on BIOS, Security -> I/O Port blah blah -> no mention of bluetooth settings there.
where do i go from here? anybody ever encountered such an issue with bluetooth?
btw, im pretty sure there is a bluetooth device on this laptop.
appreciate any help

Here's the Link for the 2539-AJ6, it does indicate that you have Bluetooth. Dowload and install the latest drivers.
http://support.lenovo.com/en_US/downloads/default.page?

HP Device Not Found Error when trying to print or scan wireless- HP Officejet Pro L7590

Have had HP Officejet Pro L7590 All-In-One Printer for years. Always worked fine and I had no issues printing via wireless connection. Several months ago.. Possibly after a Windows 8 update. From Windows 8 to Windows 8.1 I have not been able to use the printers wireless feature. When I try to print or scan it shows the printer as offline. Also get an error message that tells me "HP Imaging device is not found". I can still print when connected to USB. Cannot scan or use features of the HP software suite. I have tried several times to correct. Reloading the software and drivers several times, but no success. I just tried again and was able to print the test page wireless, so got all excited and thought I fixed it. Then tried to print something and got the same error message I have seen in the past. I have talked to certain supports saying that it may be a firewall setting within Windows. Any other suggestions? Thanks

Hi @rfjones002,
Welcome to the HP Support Forums! I see you are not able to print or scan wirelessly to your HP Officejet L7590 and your computer running the Windows 8.1 Operating system. You get a 'Printer offline' or 'HP Imaging device not found' errors.
I would like you to start with the steps listed below:
Hold down the Windows Logo key () on the keyboard and the 'R' to open the run box, type %temp%
Delete all files and folders from the temp folder. Choose skip if any pop ups appear saying any of the files could not be deleted
Uninstall the software again - Uninstall the Printer Software Instructions
When the uninstall has completed restart the computer
Follow these steps to reset the registry settings and options for Windows Installer.
Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
In the Open box, type
msiexec /unregister
and then click OK.
Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
In the Open box, type
msiexec /regserver
and then click OK
*Note: there is a space between the c and the /
If you have any difficulty with this step, please use this link to perform it another way. Restarting Windows Installer
Run Disk cleanup from Accessories\ System Tool < How to Delete files using Disk Cleanup
Download and install the latest version of Adobe flash player http://www.adobe.com/support/flashplayerflashplayer/downloads.html
Perform a clean boot > How to perform a clean boot in Windows
Download the following SP40669 File Download - if this does not download and or install please proceed to the next step.
Turn off the Real-Time Scanning and Firewalls; The image below is a McAfee example, if you have a different antivirus program and need help disabling Real-Time Scanning and Firewalls let me know.
- Image source
Now you can go ahead and download and install the software here >
HP Officejet Pro Full Feature Software and Driver
If you are unable to print a test page, please run the HP Print and Scan Doctor- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
Please let me know if this was successful! I will watch for your reply.
Thank you,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Photosmart 7515 connect via USB but not wireless, Device not found on Network

Purchased a 7515 all-in-one, was able to setup wirelessly to MacPro but has lost ability to connect wirelessly. This happened with OS X Lion and nor MountainLion. Have a TimeMachine Airport. Printer connects to network but during setup from MacPro, repeatedly get "Device Not Found on Network" after stepping through wireless installation setup screens. I have reset router, printer, firmware updates, software updates.... at wits end. I have followed the instructions on the below resource page link with no luck. Use WPA-PSK encryption (Automatic AES or TKIP) on network and diagnostics on printer pass.
Please help anyone!
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02946597&tmp_task=solveCategory&cc=us&dlc=en&la...

It sounds like the Macs and the printer just aren't communicating.
If you press the network icon on the printer, does it indicate it is connected to the network?
I recommend two additional steps that are not listed in the linked document. The printing system of the Mac may need to be reset as it will clear any software that could be interfering (such as corrupted installations).
Follow the steps as outlined for 10.7 or 10.8 in this document from HP.
The next step is to install the driver package from Apple. This can be found here.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

I'm receiving error Boot Device Not Found and Hard disk not exist when I boot up my laptop

I'm receicing the error Boot Device Not Found when i power on my HP G60-235DX laptop. After following HP's recommended troubleshooting steps, I receive error Hard disk not exist. Hmmmm....that's a little concerning. My guess is I need a new hard drive? I have the 17 recovery disks I made when I setup this laptop, however I'm not sure if they will resolve this issue. Any suggestions?

One of 3 things has happened, listed from most likely to least likely
1. Hard drive has died, replace it with one of the same size or larger, then use the HP recovery discs to re-install windows.
2, The motherboard has serious problems. (Replace the notebook)
3. The hard drive cable that connects it to the motherboard has somehow failed, not very likely. (replace the cable)
Replace the hard drive with a new one and use your recovery discs to get Windows back on it.
Here is your service manual, will show you how to replace the hard drive
http://h10032.www1.hp.com/ctg/Manual/c02985882.pdf
Recovery Instructions for Vista
Recovery Instructions for Windows 7

Presario CQ61 - Boot Device not found, Hard dis not exist

Hi i bought my presario CQ61-405AX 2nd hand roughly a year ago and it was almost new, my laptop was running fine, and then it froze, and so i had to turn it off, after i waited 30min for it to unfreeze, it now, when i boot it up, appears with a black screen, with the error
"Boot Device Not Found
Pleae install a operating system on your hard disk
F2 system diagnostiscs"
I went onto hp support and followed the prompts until it did a hard disk test and the error, "Hard Disk Not Exist" appeared
I have no idea how to fix it, i am running Windows 7 home premium, and i fear i may have to buy another hard drive
Thank's in advance
This question was solved.
View Solution.

Hi,
The most likely explanation is that your Hard Drive has failed and will need to be replaced, however as a further test, try the following.
1. Create a bootable Ubuntu CD - a guide on creating an Ubuntu CD and the download can be found Here.
2. When created, follow the guide on the link below to Try Ubuntu.
http://www.ubuntu.com/download/help/try-ubuntu-before-you-install
The 'Try Ubuntu' option runs the OS from the CD without the need to install on your HDD. If this runs Ok ( it will be slow running from a CD ), this would tend to confirm that the problem is with the HDD.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Tascam US-600 Device none found. On PC it works perfectly, WHY???

Similar Messages

Maybe you are looking for