Test Management shows Incorrect status of Defect Incidents in Reports.

Hi Experts,
For Solution Manager Test Management, We have created Defect Correction by Copying it from SMIN Transaction and created user required statuses in it. But when now we are trying to generate report for Test Packages which has Defect Correction raised, We can see that the statuses in the report are not correct, For Example(Instead of Resolved MPT Exceeded, Customer Action MPT Warning it shows MPT Exceeded and MPT Warning respectively.). You can refer to the attached screenshot for more details.
Could you please help me to understand where are this Statuses updated from in the Reports.
Thanks,
Rakesh Bhor.

Rakesh,
First try to match whether the same status also exists in the transaction itself.
In Tcode CRMBS02 double check the status especially the last column with values of INPR/FINI etc which controll whether the ticket is closed or in process .

Similar Messages

  • Process chain status shows incorrect status

    When ever i receive bad data requests from R/3, BW pulls the error requests into a separate PSA and pass-thru the good once in another PSA and then into datatarget.
    However the overall status is green for the job/package and the package when executed in ProcessChain does not show an errors. But the errors are not noticed until user notices it in the qyuery.
    How to capture such errors and notified, is their any automation possible? I have setup e-mail on process chain failures but these kind of errors are not captured because the overall status of request is GREEN.
    Here is the status on infopackage.
    Incorrect data records - error requests (total status GREEN)
    Diagnosis
    Data records were recognized as incorrect.
    System response
    The valid records were updated in the data target and can be used in reporting.
    The incorrect records were not written to the data target, but were posted retractively under a new request number in the PSA.
    Procedure
    Check the data in the error requests, correct the errors, and post the error requests.

    Hi Gopikrishna,
    Please check if "Error Handling" in the Update Tab of your Infopackage has been enabled, I guess it is.
    If this has been enabled , then the error recs will be isolated and only the Correct records will be posted into the Data Target. It is the responsibility of the BW Administrator to identify such errored records, correct them and Post it back to the DAta target. Because error handling is used, the Monitor will show Green, as all the error recs have been separated.
    To avoid this, you have to remove Error Handling from the INfopackage, then you will see the Load failing and the Process Step in the process chain would turn RED with the corresponding error messages.
    Regards,
    Praveen.

  • App Store Update Shows Incorrect Status

    App store shows iPhoto 9.3.2 as an available update but I have already downloaded and installed it. Any thoughts on how to correct this?

    The Apple Support Communities are an international user to user technical support forum. As a man from Mexico my first language is Spanish. I do not speak English, however I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
    The Mac App Store can see the apps on attached drives and partitions. Do you have a backup drive connected that has the older version of the app on it?

  • AAM showing incorrect status for Lightroom installation.

    I had LR 4.3 installed.  I had received a notice in app that 4.4 was available.  Since this application had been installed via the AAM under my Cloud Membership, I was expecting to receive a message from the AAM that there was an update available.  However, when I launched the AAM software, it said that my LR was up to date and was using 4.4.  I double checked my LR install and it was indeed 4.3 and was looking for me to update to 4.4.
    Since all of this is supposed to occure through AAM, I uninstalled my LR using the control panel.  I have reopened AAM and it still says that LR 4.4 is installed.  I have rebooted and it still says that LR 4.4 is installed.  It does not give me the option to install.  So, I am now at a loss.  What do I do to get LR reinstalled under my Cloud Account, and in a manner that it will update via the AAM instead of in app?

    Run the Creative Suite Cleaner Tool, try again.
    Mylenium

  • Lights-Out Management is not showing full status

    Hi,
    Since I upgraded my Intel XServe to Leopard, I don't get the full Lights-Out Management (LOM) status any more.
    In Server Monitor it is only showing the status for:
    - Power
    - Temperature
    - Blowers
    - Security
    Not the
    - Info
    - Memory
    - Drives
    - Network
    Any idea what's wrong?
    Thanks,
    JO

    http://discussions.apple.com/thread.jspa?threadID=1256863&tstart=0

  • VM2.2 manager page shows wrong status "Shutting down" for VM Guest

    Hi,
    VM manager page shows wrong status "Shutting down" for VM guest, I can very much connect to console and see it is up and running.
    It happened when trying to shutdown VM guest manually but in parallel VM server got rebooted automatically.
    Any information on How to correct the status in VM manager page?
    Thank you.

    I found below this solution on http://download.oracle.com/docs/cd/E15458_01/doc.22/e15441/appendix_e.htm#BHBCIAJB
    To solve this problem, change the status manually as follows:
    1.Make sure that the virtual machine in the target server has been shut down. Use xm list or virsh list to check the virtual machine name and ID.
    2.If the virtual machine is running, use xm shutdown vm_id or virsh shutdown vm_id to shut it down, where vm_id refers to the virtual machine name or ID.
    3.Use xm list or virsh list to check if the virtual machine has been shut down. If it is still running, use xm destroy vm_id, or virsh destroy vm_id to shut it down.
    4.Log in as oracle (or root first, then su - oracle) to the computer where Oracle VM Manager is installed, and run the following commands to change the virtual machine status to Powered off in the Oracle XE database:
    export ORACLE_HOME='/usr/lib/oracle/xe/app/oracle/product/10.2.0/server'
    export ORACLE_SID=XE
    $ORACLE_HOME/bin/sqlplus / as sysdba
    SQL> update ovs.ovs_vm_img t set t.status='Powered Off' where t.img_name like 'vm_name';
    SQL> commit;
    SQL> quit
    vm_name refers to the virtual machine name.
    5.Retry your operation, or delete the virtual machine directly.

  • TFS 2012 Test Agent keep alternating status Online/Disconnected

    TFS 2012 environment
    Test Controller and Agent Update 3.  
    We are using a shadow account to connect the Agent (not on domain) to the Controller (on domain).
    The problem I'm having is that the Test Agent Status alternates constantly between Online and Disconnected. 
    I have all TCP and UDP ports open in the Firewall on the Agent and Controller (can't just turn it off because of policy settings).  
    I have created an environment in Lab Center and can kick off a Lab Template based build definition to execute an automated test.  The process get to a point of wait for the the test environment to be ready, starts a test execution, and completes the
    test run with a Warning: "An error occurred while communicating with Agent vstfs:///LabManagement/TestMachine/###", where ### is a three digit number.
    If I just sit and watch the Test Agent status, with no test runs running, the status will show Online for about 10-15 seconds and then show Disconnected for about 30-60 seconds.  And then it repeats.  
    Another thing to mention, the Test Controller for this effort was cloned from a previous Test Controller that was used for another project.  The previous Controller was on the domain at the time of being cloned and had issues of being the same computer
    name on the network and then other issues because the Controller was already assigned to a collection.  Another person here went through a process of fixing by uninstalling the controller software and then deleting some XML files that were left behind
    after uninstalling the controller software.  I feel that a new controller should be created from scratch because I feel that there is still some conflicts between the old and new Controllers.
    Any assistance would be greatly appreciated.

    I have additional information to supply to this thread for the benefit of others who may come across this issue.
    The main issue of using the same version of Test Manager with the version of TFS you have running is the first part.
    After this post, I added additional testing environments and virtual machines in SCVMM and started having the "Online/Disconnected" issue again.  With more research, I figured out that I had to add the IP address and host name of
    the Test Controller to the hosts file on the Test Agents (path to the
    hosts file "C:\Windows\System32\drivers\etc\").  Just open this file in NotePad (or the editor of your choice) and add a line at the end with the IP and host name.
    Example hosts file:
    # Copyright (c) 1993-2009 Microsoft Corp.
    # This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
    # This file contains the mappings of IP addresses to host names. Each
    # entry should be kept on an individual line. The IP address should
    # be placed in the first column followed by the corresponding host name.
    # The IP address and the host name should be separated by at least one
    # space.
    # Additionally, comments (such as these) may be inserted on individual
    # lines or following the machine name denoted by a '#' symbol.
    # For example:
    # 102.54.94.97 rhino.acme.com # source server
    # 38.25.63.10 x.acme.com # x client host
    # localhost name resolution is handled within DNS itself.
    # 127.0.0.1 localhost
    # ::1 localhost
    123.456.78.9 computername.domain.com
    I have used this several times and it has worked every time (so far) where I use shadow accounts in the TFS test environments.  Hope this helps!

  • Blank Screen in Import Manager under Import Status Tab

    Hi Experts,
    Problem: Blank Screen in Import Manager under Import Status Tab.
    I have opened import manager with source file(excel & xml) and i have also did mapping from source fields to destination fields and also seleted display/key field in match records tab and refreshed it. when I select Import Status tab. I am not able to see any details/status regarding the map which i have done. when i click on excute button.. the source file is sucessfully import and pop up dailogue box shown. I have also checked in Data Manager and data was visible.
    But.. at Import Status Tab in import manager.. i am not able to see any details.. it is just showing as white blank screen.
    If any one know the solution could you please help me out.
    Thanks
    Bharat

    Hi Bharat,
    As per New MDM Release we have to Install MDM 7.1 servers on 64 bit machine and GUI's can be installed on 32 machine, whreas if you are using MDM 5.5 Version then 32 bit machine can be used.
    Now as you said that you have sucessfully imported the excel file and then you have mapped the filed after that without any error you got the ready to import screen to import the data into MDM database then processwise there is no problem as far as screens are concern i will suggest you please un-install MDM Import Manager GUI and then again install it, your problem would be solved.
    If it doesnt please do let us know.
    Thanks and Regards
    Praful.

  • Test Package in Test Management tab of Change Document

    Hi Expert,
    When we test on CHARM, we realized that the test package in test management tab can only be
    attach before the developer change the status to "Pass normal change to
    test". Is this standard or can we do any configuration to allow the
    test package be attach during "Test for Preliminary Input" status?
    Thanks
    Best Regards
    Remy

    Hi,
    I manage to solve this issue as below,
    Go to SPRO
    >SAP Solution Manager Implementation Guide
    >SAP Solution Manager
    >Capabilities (Optional)
    >Change Control Management
    >Standard Configuration
    >Change Request Management Framework
    >Adjust UI objects by User Status
    Thanks
    Best Regards
    Remy

  • How can I determine what sites are being referenced within Central Admin Upgrade and Migration Manage Databases Upgrade Status?

    When I go to Central Admin > Upgrade and Migration  > Manage Databases Upgrade Status, I have 2 content databases which have the status:
    Database is up to date, but some sites are not completely upgraded.
    How can I determine which sites are not completely upgraded?

    Manage Databases Upgrade Status will provide you all active and offline DB details, you can get same result
    using below PowerShell cmdlet.
    Get-SPDatabase and Get-SPContentDatabase will provide all active database/Content DB in Farm which include Service application db, central admin DB.
    Get-SPDatabase | Format-Table Name, ID
    Coming back to your question, if you find that there are some site are not completely upgraded then run below command and understand the cause if issue on specific DB.
    Test-SPContentDatabase WSS_ContentDB_Name
    If you find any missing file issue in DB then resolve these issue to upgrade content database.
    (verify all customizations referenced within the content database are also installed in the web application. This cmdlet can be issued
    against a content database currently attached to the farm, or a content database that is not connected to the farm )
    Use the Upgrade-SPContentDatabase cmdlet
    to resume a failed database upgrade or begin a build-to-build database upgrade against a SharePoint content database
    Upgrade-SPContentDatabase WSS_Content
    reference:
    http://technet.microsoft.com/en-us/library/ff607813(v=office.15).aspx
    http://technet.microsoft.com/en-us/library/ff607941(v=office.15).aspx
    If my contribution helps you, please click Mark As Answer on that post and
    Vote as Helpful
    Thanks, ShankarSingh(MCP)

  • From line on emails shows incorrectly

    i belong to a group where i must send an email to the entire group at once, because it is a group mail it will also come to my inbox. the problem is the "from" line shows someone else's email, when i send the same email from my other email client the "from" line shows my email as it should... i have screenshots of both clients... the thunderbird one shows incorrectly. i have contacted the group owner and my emails are not moderated and my email shows as sender on her end.
    why is my thunderbird showing the incorrect email in the "from" line... it is a valid email but it is not mine
    is there a way for me to post screenshots to explain better?

    lets test that shall we.
    Tools menu > options > Advanced > Reading and display and uncheck the "Show only display name for people in my address book" restart Thunderbird
    Does that fix the display issue?

  • Dump in production system :Incorrect status in pricing

    Hi All,
    We have patched out SRM5.5 server system recently with  15 and  16 patch.
    After the patch we are getting  many dums in production system.
    When i check in the ST22 ,the error syaing that
    Error analysis
        An exception occurred which is explained in detail below.
        The exception, which is assigned to class 'CX_BBP_PD_ABORT', was not caught and
        therefore caused a runtime error.
        The reason for the exception is:
         *Incorrect status in pricing*
    How to correct the error
        If the error occures in a non-modified SAP program, you may be able to
        find an interim solution in an SAP Note.
        If you have access to SAP Notes, carry out a search with the following
        keywords:
        "UNCAUGHT_EXCEPTION" "CX_BBP_PD_ABORT"
        "SAPLBBP_PDH" or "LBBP_PDHU08"
        "BBP_PD_ABORT"
        If you cannot solve the problem yourself and want to send an error
        notification to SAP, include the following information:
        1. The description of the current problem (short dump)
           To save the description, choose "System->List->Save->Local File
    and  i have checked the IPC ,it is also active only,.
    We have got his issue all of suddenlly,
    Can any one tell us what could be the issue.
    Regards
    cb

    Hi All,
    thanks a lot for your response ,
      I have done the  Simulation which shows everything is fine  and i have chcked with BBP_CND_CUSTOMIZING_CHECK  t-codes even that is also correct  only .
    we are plannning for rasing the issue with SAP.
    Besides that the system might have activated the BADI simple pricing active (or something like that). This would give trouble as well with the IPC (they can't both be active).
    @Robin which the badi we can check.
    once agina thanks a lot for your replys.
    Regards
    cb

  • T42 Showing Incorrect Adapter Name in Access Connections

    I am working on a T42 laptop and installed Access Connections 5.12.  I have gone through and did all the prerequisites prior to installation of Access Connections (wireless driver update, UltraNav Driver upgrade, Video Upgrade, BIOS upgrade, LAN driver update, etc).  I have created a profile for a wireless network that is in range and operational.  My problem is the adapter is showing incorrectly within Access Connections.  This wireless adapter is identified correctly in device manager as "11b/g Wireless LAN Mini PCI Adapter".  But in Access Connections, it is showing as "Intel(R) WiFi Link 5300 AGN".  I am needing this to identify the correct adapter to get Access Connections to work.  Any ideas?

    Hi jeremieolson,
    Unless you need to use Access Connections to switch among multiple *wired* networks, I'd suggest simply un-installing Access Connections and using the built-in Windows tools for establishing your wireless connection. Windows will let you establish wireless profiles just like Access Connections does. AFAIK Access Connections doesn't add anything to the built-in Windows wireless networking, and in your case it's misbehaving, so...
    Results of Your Ideal Business-Class Laptop survey, concluded 2009-07-29.
    Did someone help you?
    Say thanks! with a kudo.
    Even better: Pay it forward, help someone else.

  • Is Test Management available in Solman 7.1 SP5

    Hi experts,
    We have Solman 7.1 SP5 installed , and trying to explore more into E2E Testing.But i couldnt find "Test Management" in solman Work Center.
    Is Test Management available in Solman 7.1 SP5 ? if yes , How can can get it visible/access in Work Center ?
    Appreciate your help
    Regards,
    KK

    Hi
    Solman workcenter are not visible even if you have SAPALL as workcenter roles are separate and need to be assigned separately.
    Kindly assign below 2 roles to your users
    SAP_SMWORK_BASIC    Work Center: Basic Authorization Objects
    SAP_SMWORK_ITEST    Work Center: Testing Management
    above will show you the workcenter tab
    you can check details in the security guide for other authorization roles
    https://websmp102.sap-ag.de/~sapidb/011000358700001180952012E.PDF
    Thanks
    Prakhar

  • Authentication to agent workstation failed when trying to run a test in Oracle Test Manager

    I have the complete version of OATS installed on my local machine. I have the OracleATSHelper, OracleATSServer and OracleATSAgent services running.
    In OTM when I go to run an openscript test I select the system, type the version number and hit run and get a "Authentication to agent workstation failed" error in the summary field.
    It worked before but I cant figure out why it isnt working anymore.
    Can anyone help?

    ATS Version: 12.3.0.1.0 build 376
    I am getting the same error when trying to execute a script from OTM - "Authentication to agent workstation failed".
    I have the OTM server on a remote (server) machine and the Oracle Agent is running on my laptop / workstation. I've tried all I have seen on this thread, but no progress. The manager is now in manual mode and the console only provides the following output:
    D:\OracleATS\agentmanager\bin>d:\OracleATS\agentmanager\bin\AgentManagerService.exe -c  AgentManagerService.conf
    wrapper  | --> Wrapper Started as Console
    wrapper  | Launching a JVM...
    jvm 1    | Wrapper (Version 3.0.3)
    jvm 1    |
    One different thing, maybe, I see is that the agentmanager_auth.log is empty always.
    Also, on the server, I've added this SYSTEM successfully, i.e.the Testing of the SYSTEM added in OTM always gives the success message "The system specified can be successfully accessed by the Oracle Test Manager server."  . In fact it does this even when I provide an incorrect password!    

Maybe you are looking for