Text not viewable in TL playback but in Print to tape on empty TL place

Many thanks for reading my problem.I have finished my film on FCP4.5 on 1 GB RAM, 10.3.5 and QT pro 6.5.2 on 2 GHz PMac. All is well when I view text clips from the TL on a broadcast monitor thru a DSR-45 SONY recorder. However when I have taken a print to tape of the entire sequence and now when I play the tape then at the place where certainly the text clip has gone or faded to black( used the Fade in fade out transition) then I can still see a light impression of the text i.e immediately when the text clip ends with the transition I have used black(slug) for 10 seconds and the text is visible there with a slight impression. I thought that this is a VTR problem changed it but the same problem persists. The irony is that the problem does not shows when I simply view the clip on the TL playback. Have also changed the monitor.What should I do to take a Final print as now the project is finished but I am stuck at this stage. I also did a an export of the entire sequence in DV PAL then reimported it back in another project the problem was again coming up in the print but not in the TL playback.
Please please suggest where I could be wrong at.Is it problem of the Hard Disk as I am using an Internal HDD for media acquisition.
Bye and warm regards to all the members.

Don't use the fade in/fade out transition for this. Just use the cross dissolve and see of that works.
This is the Final Cut Express forum, by the way.

Similar Messages

PDF files created in Pages have text not viewable on PC

I have created a large (7 MB) program for a large conference in Pages. In order to have it printed, I converted it to a PDF. For some reason, some of the text on some pages is not viewable on PCs using Acrobat Pro or Reader - it should be black and is showing as white text.
What could be the problem? This does not happen on all PCs, only some. Has anyone experienced this in the past and is there a solution? Of course, my deadline is rapidly approaching...the conference starts on the 26th. Any help is greatly appreciated.
Thanks!
Eden

I am having the same problem when exporting to PDF AND Word files. My document looks great in Pages and in Preview, but half of my text is converted to white when viewed in Acrobat Reader or Word. This is very FRUSTRATING!! I have a deadline approaching, too, and am collaborating with another shop that works on PC's. Any ideas for how to fix this issue are very welcome!

After an iPad update yesterday I sent a video and it is not viewable just black screen but sound is there. I sent it to my windows 7 laptop and there it is not viewable at all the start button appears crossed through.only works on apple PC

After yesterday's update sent a personal video it was not not viewable , i was told only black screen but audio, will play on apple pc but not windows.
On my own windows operated laptop when l open the video the start button is crossed through
Is there something l need to do? I can view the videos fine on my iPad ?

'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Text not viewable in some browsers

I made a Flash site with text and graphics, and have been
told by some of my customers that only the graphic appears on the
page. The site is www.simplypilatesnashville.com. Is this just a
browser, Flash player issue? Thanks.

pretty popular issue since flash 8 came out - asked/answered
here almost daily - basically you
probably used flash 8 only text rendering features and
published to verion 8, but your users have an
older version - therefore can't see the latest technology in
the flash player - tell them to update
their player, or incoporate flash player detection (express
install) or remove these text effects if
possible and publish to t alower player.
hope this helps.
--> **Adobe Certified Expert**
--> www.mudbubble.com
--> www.keyframer.com
Amyrs wrote:
> I made a Flash site with text and graphics, and have
been told by some of my
> customers that only the graphic appears on the page. The
site is
> www.simplypilatesnashville.com. Is this just a browser,
Flash player issue?
> Thanks.
>

HT4515 How to make sure that after browsing that the webpage is not running in the background, but totally closed down

How to make sure that after browsing that the webpage is not running in the background, but totally closed down

Double tap the Home button, tap & hold the Safari icon until it starts to wiggle, tap the red minus sign to remove it from the Multi-Tasking bar. Tap the Home button when finished.

CUDA always works great on timeline playback but sometimes not at all on Export+MRQ enabled?

Hi,
I have Premiere CS 5.5.2 on Mac with Lion 10.7.2. System is Q6600, 8 GB DDR2, graphics is Nvidia GTX 560, 1 GB DDR5, 256 bit. AVCHD 1080i material exporting to PAL DV.
CUDA works great on timeline playback but SOMETIMES (3rd time in 3 months) when I export with MRQ enabled it simply does not kick in at all. Exporting times are high as exporting without CUDA, the graphics card's coolers don't speed up like they do when I play the timeline or when exporting with CUDA was working.
If I cancel the export CUDA works just like before when I play the timeline. If I go to export, again, it does not work. Very high export times. I click cancel again and it works fine playing the timeline, the coolers on the graphics card go slightly up as to indicate that th GPU is beeing used, everything is just fine. MRQ is always enabled and the project preferences are set to use CUDA.
Twice I solved this problem by closing EyeTV since I thought that this was the issue because maybe this program was using somehow the video acceleration and no more room was left for CUDA, but last time even this did not work. I closed EyeTV, restarted Premiere but nothing. Same problem, CUDA worked just fine playing the timeline WITH EyeTV running but not when exporting with MRQ. I had to restart the computer to get CUDA to work on export with MRQ enabled.
With CUDA: 30 minutes of AVCHD 1080i footage + logo applied and export with MRQ = 15 minutes exporting time to PAL DV.
Without CUDA or when CUDA does not work on export: 3 hours exportinng time to PAL DV.
For those who don't know EyeTV is a tv tuner application and I use it on DVB-C to monitor 2 national TV channels that are on the same digital multiplex. I opened up even 6 channels at the same time on the same multiplex and CUDA still worked fine on the timeline.
MRQ is always checked, always ON.
All I want to know if there is anyone else with this issue, wheter on Windows or Mac, their observations and what they tried to solve this issue.
Thanks a lot,
Best regards,
Dj Lyon

Taken from here: http://blogs.adobe.com/premiereprotraining/2010/10/scaling-in-premiere-pro-cs5.html
"Maximum Render Quality can still make a difference with CUDA-accelerated exports for any parts of the render that are processed on the CPU."

Is there a way of just changing the text to the main menu..but not the submenus?

Is there a way of just changing the text to the main
menu..but not the submenus?
Also i have looked at in the browser and when i glide over
the menu catergories or click on them they dont show the
submenu...what can i do to solve this?

Does the example described at
http://labs.adobe.com/technologies/spry/articles/menu_bar/index.html
work for you?
What are you doing that's different from the example?
When you say you just want to change the text of the main
menu without changing the submenus, do you mean you want to do so
dynamically, at some later stage after the page has loaded?
If so, you could try retrieving the main menu elements you
want to update from the DOM and updating them from your script's
event handler for whatever event it is that you want to update them
in response to. This presumes the widget will detect this and
update appropriately, which I can't say for sure since I haven't
actually tried it.
Hope that helps!
Rob

HT3529 Have an Iphone 5 and had to restore. I recieved text message and replied after restore but they are no longer in thread.I did not erase. past messages still exist. Did sending party delete them? If so can I retreave them?

Have an Iphone 5 and had to restore. I recieved text message and replied after restore but they are no longer in thread.I did not erase. past messages still exist. Did sending party delete them? If so can I retreave them?

No, they probably got lost out there somewhere. They're gone.

Set up LAMP server, but not viewable from outside.

I set up a LAMP server, followed the guide http://wiki.archlinux.org/index.php/LAMP there. I can view it from localhost or the IP address or the web address http://plaufcan.homeunix.org. But it is not viewable outside of my local network. What else do I have to do?

If your router is showing an external IP address of 192.x.x.x, I am guessing that you are on a DSL line, and that you more than likely used the windows setup software to configure your internet connection.
Basically, when you run the software, many of the modems go into a very dumb router configuration. Your router is picking up a natted ip address from the modem, and using that to update dyndns.
# nslookup plaufcan.homeunix.org
Non-authoritative answer:
Name: plaufcan.homeunix.org
Address: 192.168.2.101
I'll bet you dollars to donuts that you can open your browser and go to http://192.168.2.1 (or alternatively http://192.168.2.254) and you'll get access to the modem. You'll have to find the page that allows it to be set to a bridge. After that, you'll have to set the router up to do any authentication that your ISP requires.
One of the large ISP's in Canada use modems like this for their DSL, and it causes no end of problem when SOHO users add another router. NATted NAT connections do not always play nice.

Is it possible to apply conditional formatting to a cell (or range) based upon a LOOKUP query to cell values in another sheet.? I want to alter the formatting (i.e., text and/or cell background color), but not cell content.

Is it possible to apply conditional formatting to a cell (or range) based upon a LOOKUP query to cell values in another sheet.?
I want to alter the formatting (i.e., text and/or cell background color), but not the content, of the target cell(s).

Hi Tom,
Your LOOKUP formula will return a value that it finds in the "other" table. That value can be used in conditional highlighting rules. (Numbers 3 calls it conditional highlighting, not conditional formatting. Just to keep us awake, I guess, but it works the same).
Please explain what you are trying to do.
Regards,
Ian.

Videos playing but not viewable... Quicktime?

Any iTunes videos I have are suddenly not viewable (the screen has lines throuigh it and multi-colors). The audio is fine.
I tried uninstalling and then reinstalling QuickTime to no avail. Now I'm wondering if I need to uninstall iTunes and Quicktime and then reinstall.
My question: since all of my music is on my iPod, when I plug it back into the computer after the reinstall, will it automatically transfer my library back to iTunes on my computer?
Thanks!

Uninstalling & reinstalling iTunes shouldn't affect your actual music & video files.
Make a backup of your itunes library.itl file before you begin, though - the 2 files mentioned here:
http://docs.info.apple.com/article.html?artnum=93732
Put them on a USB drive or just somewhere else on your C: drive.
But anyway - as for the video problem, have you seen this article?
http://docs.info.apple.com/article.html?artnum=305392

HT201412 My text messages go to my ipad but not my iphone after upgrading to ios7.0.2, does anyone know a fix

My text messages go to my ipad but not my iphone after upgrading to ios7.0.2, does anyone know a fix

They are not text messages, they are iMessages.
Turn on iMessage on the iPhone.

What is the significance of the blue, green and grey highlighted names in the directory used to text or iMessage? This is not about the messaging themselves, but the names to select to text or iMessage.

What is the significance of the blue, green and grey highlighted names in the directory used to text or iMessage? This is not about the messaging themselves, but the names to select to text or iMessage.

The entries in blue are people you've recently exchanged iMessages with, the ones in green are people with whom you've recently exchanged SMS messages and the ones in grey are people with whom you have not recently exchanged any messages.

My soundbooth not function withe error code NV_OGL. the stament: "soundbooth could not find any capable playback modules". but pc system is working. Any one can help me?

Hi, I am SK Chew,My soundbooth is not function after few months not used and with an error code "NV_OGL" and the statement is "soundbooth could not find any capable playback modules". and my pc is working in good condition. any one can help me?

Quicktime errors http://forums.adobe.com/message/4545437 may help
Or, not exactly the same, but MAY be related
ExporterQuickTimeHost QT Version http://forums.adobe.com/thread/1109614

I'm picking up all of the data script related to the sending / receipt of an e-mail along with the e-mail itself and can't find a way of not showing the text. Obviusly only a command but can't find it!

I'm picking up all of the data script related to the sending / receipt of an e-mail along with the e-mail itself and can't find a way of not showing the text. Obviusly only a command but can't find it! Help!

Shift-Command-H is the key-combo to switch 'Long Header'/'Standard Header' .
Long way: Top Menu -> View -> E-Mail
Stefan

Text not viewable in TL playback but in Print to tape on empty TL place

Similar Messages

Maybe you are looking for