TFTP error on 3925 intergrated voice router

We have a 3925 intergrated voice router that prompts this error cmapp_sccp_tftp_download_file: Unable to get configuration file size tftp://x.x.x.x/SKIGxxxxxx.cnf.xml, rc=-2
It gives the IP to our call manager then a mac address of analog gatway and extension pertaining to cnf.xml. The error runs when the router is connected to the network and also when it is not connected to the network. I have looked in the Cisco bug toolkit did not find a bug that was related to the issue. I check the tftp in the call manager there is no file of that type which there should not be. We have 3925s voice routers already registered to the call manager. Voice router information below:
Cisco IOS Software, C3900e Software (C3900e-UNIVERSALK9-M), Version 15.2(4)M2, RELEASE SOFTWARE (fc2)
System image file is "flash:c3900e-universalk9-mz.SPA.152-4.M2.bin"
Cisco CISCO3925-CHASSIS (revision 1.0) with C3900-SPE200/K9 with 1797120K/300032K bytes of memory

No, we are not using as CME.
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2015.03.26 11:13:02 =~=~=~=~=~=~=~=~=~=~=~=
XXXXXXXX#
XXXXXX#term len 0
XXXXXXXX#sh run
Building configuration...
Current configuration : 14446 bytes
! Last configuration change
! NVRAM
! NVRAM
version 15.2
no service pad
service timestamps debug datetime msec localtime
service timestamps log datetime msec localtime
service password-encryption
service sequence-numbers
hostname XXXXXXX
boot-start-marker
boot system flash:c3900e-universalk9-mz.SPA.152-4.M2.bin
boot-end-marker
card type t1 0 0
logging buffered 16384
enable secret 4 DJsu7i99xp.Xzvkf3epKdaTCS5CUguxaCh2jhXROMZ.
aaa new-model
aaa authentication login default group tacacs+ local
aaa authentication enable default group tacacs+ enable
aaa authorization console
aaa authorization exec default group tacacs+ if-authenticated
aaa authorization commands 15 default group tacacs+ none
aaa accounting exec default start-stop group tacacs+
aaa accounting commands 15 default start-stop group tacacs+
aaa accounting connection default start-stop group tacacs+
aaa accounting system default start-stop group tacacs+
aaa session-id common
clock timezone CST -6 0
clock summer-time CDT recurring
network-clock-participate wic 0
network-clock-select 1 T1 0/0/0
ip cef
no ip domain lookup
ip domain name textron.com
no ipv6 cef
multilink bundle-name authenticated
isdn switch-type primary-dms100
voice-card 0
dspfarm
dsp services dspfarm
voice rtp send-recv
voice service pots
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback none
voice class codec 1
codec preference 1 g711ulaw
codec preference 2 g729r8
codec preference 3 g729br8
voice translation-rule 1
rule 1 /3451/ /918005336093/
voice translation-rule 2
rule 1 /^$4...$$/ /XXXXXX\1/
rule 2 /^$6...$$/ /XXXXXX\1/
voice translation-profile 5-digit-dial
translate called 1
voice translation-profile pstn-in
translate called 2
application
global
service alternate default
license udi pid
hw-module pvdm 0/0
hw-module pvdm 0/1
hw-module pvdm 0/2
vtp domain BHAMA
vtp mode transparent
redundancy
controller T1 0/0/0
cablelength long 0db
pri-group timeslots 1-24 service mgcp
description
controller T1 0/0/1
cablelength long 0db
pri-group timeslots 1-24 service mgcp
description
csdb tcp synwait-time 30
csdb tcp idle-time 3600
csdb tcp finwait-time 5
csdb tcp reassembly max-memory 1024
csdb tcp reassembly max-queue-length 16
csdb udp idle-time 30
csdb icmp idle-time 10
csdb session max-session 65535
interface Loopback0
ip address
interface Loopback11
description
ip address
interface GigabitEthernet0/0
description
ip address
duplex auto
speed auto
media-type rj45
interface GigabitEthernet0/1
description
ip address 1
duplex auto
speed auto
media-type rj45
interface GigabitEthernet0/2
no ip address
shutdown
duplex auto
speed auto
interface GigabitEthernet0/3
no ip address
shutdown
duplex auto
speed auto
interface Serial0/0/0:23
description
no ip address
encapsulation hdlc
isdn switch-type primary-dms100
isdn incoming-voice voice
isdn map address .* plan isdn type national
no cdp enable
interface Serial0/0/1:23
description
no ip address
encapsulation hdlc
isdn switch-type primary-dms100
isdn incoming-voice voice
isdn map address .* plan isdn type national
no cdp enable
router eigrp 1
network 10.0.0.0
redistribute connected
passive-interface default
no passive-interface GigabitEthernet0/0
no passive-interface GigabitEthernet0/1
ip forward-protocol nd
no ip http server
no ip http secure-server
ip tacacs source-interface Loopback11
logging trap notifications
logging facility local1
logging source-interface Loopback11
logging host
logging host
logging host
logging host
logging host
access-list 18 permit
access-list 18 permit
access-list 18 permit
access-list 18 permit
access-list 86 permit
access-list 86 permit
access-list 86 permit
access-list 86 permit
access-list 89 permit
access-list 89 permit
access-list 89 permit
nls resp-timeout 1
cpd cr-id 1
snmp-server community
snmp-server community
snmp-server ifindex persist
snmp-server trap-source Loopback11
snmp-server locatiON
snmp-server contact
snmp-server system-shutdown
snmp-server enable traps snmp authentication linkdown linkup coldstart warmstart
snmp-server enable traps vrrp
snmp-server enable traps flowmon
snmp-server enable traps transceiver all
snmp-server enable traps ds1
snmp-server enable traps call-home message-send-fail server-fail
snmp-server enable traps tty
snmp-server enable traps eigrp
snmp-server enable traps gatekeeper
snmp-server enable traps xgcp
snmp-server enable traps license
snmp-server enable traps ethernet cfm cc mep-up mep-down cross-connect loop config
snmp-server enable traps ethernet cfm crosscheck mep-missing mep-unknown service-up
snmp-server enable traps flash insertion removal
snmp-server enable traps auth-framework sec-violation
snmp-server enable traps ds3
snmp-server enable traps entity-sensor threshold
snmp-server enable traps isdn call-information
snmp-server enable traps isdn layer2
snmp-server enable traps isdn chan-not-avail
snmp-server enable traps isdn ietf
snmp-server enable traps adslline
snmp-server enable traps vdsl2line
snmp-server enable traps c3g
snmp-server enable traps icsudsu
snmp-server enable traps envmon
snmp-server enable traps ds0-busyout
snmp-server enable traps ds1-loopback
snmp-server enable traps energywise
snmp-server enable traps vstack
snmp-server enable traps mac-notification
snmp-server enable traps aaa_server
snmp-server enable traps atm subif
snmp-server enable traps cef resource-failure peer-state-change peer-fib-state-change inconsistency
snmp-server enable traps memory bufferpeak
snmp-server enable traps cnpd
snmp-server enable traps config-copy
snmp-server enable traps config
snmp-server enable traps config-ctid
snmp-server enable traps entity
snmp-server enable traps fru-ctrl
snmp-server enable traps resource-policy
snmp-server enable traps event-manager
snmp-server enable traps frame-relay multilink bundle-mismatch
snmp-server enable traps frame-relay
snmp-server enable traps frame-relay subif
snmp-server enable traps hsrp
snmp-server enable traps ipmulticast
snmp-server enable traps msdp
snmp-server enable traps mvpn
snmp-server enable traps nhrp nhs
snmp-server enable traps nhrp nhc
snmp-server enable traps nhrp nhp
snmp-server enable traps nhrp quota-exceeded
snmp-server enable traps pim neighbor-change rp-mapping-change invalid-pim-message
snmp-server enable traps pppoe
snmp-server enable traps cpu threshold
snmp-server enable traps rsvp
snmp-server enable traps syslog
snmp-server enable traps l2tun session
snmp-server enable traps l2tun pseudowire status
snmp-server enable traps vtp
snmp-server enable traps bstun
snmp-server enable traps dlsw
snmp-server enable traps ipsla
snmp-server enable traps stun
snmp-server enable traps bfd
snmp-server enable traps bulkstat collection transfer
snmp-server enable traps mpls traffic-eng
snmp-server enable traps mpls fast-reroute protected
snmp-server enable traps mpls rfc ldp
snmp-server enable traps mpls ldp
snmp-server enable traps pw vc
snmp-server enable traps ipmobile
snmp-server enable traps snasw alert isr topology cp-cp port link dlus
snmp-server enable traps dial
snmp-server enable traps dsp card-status
snmp-server enable traps dsp oper-state
snmp-server enable traps dsp video-usage
snmp-server enable traps dsp video-out-of-resource
snmp-server enable traps ethernet cfm alarm
snmp-server enable traps rf
snmp-server enable traps vrfmib vrf-up vrf-down vnet-trunk-up vnet-trunk-down
snmp-server enable traps mpls vpn
snmp-server enable traps ccme
snmp-server enable traps srst
snmp-server enable traps voice
snmp-server enable traps dnis
snmp-server host
snmp-server host
snmp-server host
tacacs-server host
tacacs-server host
tacacs-server host
tacacs-server host
tacacs-server key
control-plane
voice-port 0/0/0:23
voice-port 0/0/1:23
ccm-manager fallback-mgcp
ccm-manager redundant-host 10.244.200.33 10.227.210.33
ccm-manager mgcp
no ccm-manager fax protocol cisco
ccm-manager music-on-hold bind Loopback11
ccm-manager config server X.X.X.X. X.X.X.X X.X.X.X
ccm-manager config
ccm-manager sccp local Loopback11
mgcp
mgcp call-agent X.X.X.X. 2427 service-type mgcp version 0.1
mgcp dtmf-relay voip codec all mode out-of-band
mgcp rtp unreachable timeout 1000 action notify
mgcp modem passthrough voip mode nse
mgcp package-capability mf-package
mgcp package-capability rtp-package
mgcp package-capability sst-package
mgcp package-capability pre-package
mgcp default-package line-package
no mgcp package-capability res-package
no mgcp timer receive-rtcp
mgcp sdp simple
mgcp fax t38 inhibit
mgcp fax t38 nsf 000000
mgcp rtp payload-type g726r16 static
mgcp bind control source-interface Loopback11
mgcp bind media source-interface Loopback11
mgcp profile default
sccp local Loopback11
sccp ccm X.X.X.X identifier 1 priority 1 version 7.0
sccp ccm X.X.X.X identifier 2 priority 2 version 7.0
sccp ccm X.X.X.X identifier 3 priority 3 version 7.0
sccp ip precedence 3
sccp ccm group 1
bind interface Loopback11
associate ccm 1 priority 1
associate ccm 2 priority 2
associate ccm 3 priority 3
associate profile 2 register Amarillo_XCODE
associate profile 3 register Amarillo_MTP
associate profile 1 register Amarillo_CNFB
switchback method graceful
switchback interval 8
dspfarm profile 1 transcode
codec g729abr8
codec g729ar8
codec g711alaw
codec g711ulaw
maximum sessions 20
associate application SCCP
dspfarm profile 2 conference
codec g729br8
codec g729r8
codec g729abr8
codec g729ar8
codec g711alaw
codec g711ulaw
maximum sessions 8
associate application SCCP
dspfarm profile 3 mtp
codec g711ulaw
codec pass-through
maximum sessions hardware 42
maximum sessions software 200
associate application SCCP
dial-peer voice 1 pots
translation-profile incoming pstn-in
incoming called-number .
direct-inward-dial
dial-peer voice 10 pots
destination-pattern 9[2-9]11
port 0/0/0:23
forward-digits 3
dial-peer voice 11 pots
preference 1
destination-pattern 9[2-9]11
port 0/0/1:23
forward-digits 3
dial-peer voice 12 pots
destination-pattern 911
port 0/0/0:23
forward-digits 3
dial-peer voice 13 pots
preference 1
destination-pattern 911
port 0/0/1:23
forward-digits 3
dial-peer voice 20 pots
destination-pattern 9[2-9].........
port 0/0/0:23
forward-digits 10
dial-peer voice 21 pots
preference 1
destination-pattern 9[2-9].........
port 0/0/1:23
forward-digits 10
dial-peer voice 30 pots
destination-pattern 91[2-9]..[2-9]......
port 0/0/0:23
forward-digits 11
dial-peer voice 31 pots
preference 1
destination-pattern 91[2-9]..[2-9]......
port 0/0/1:23
forward-digits 11
dial-peer voice 40 pots
destination-pattern 9011T
port 0/0/0:23
prefix 011
dial-peer voice 41 pots
preference 1
destination-pattern 9011T
port 0/0/1:23
prefix 011
dial-peer voice 50 pots
incoming called-number .
direct-inward-dial
gatekeeper
shutdown
call-manager-fallback
secondary-dialtone 9
max-conferences 8 gain -6
transfer-system full-consult
ip source-address X.X.X.X port 2000
max-ephones 700
max-dn 1400 octo-line
system message primary Operating in SRST mode
system message secondary In SRST mode
transfer-pattern .T
voicemail XXXXXXXXXXXX
translation-profile incoming 5-digit-dial
call-forward pattern .T
call-forward busy XXXXXXX
call-forward noan XXXXXXXX timeout 10
time-zone 8
banner exec ^C
^C
banner login ^C
******************* WARNING NOTICE *******************
^C
line con 0
exec-timeout 15 0
password
line aux 0
exec-timeout 15 0
password
line vty 0 4
exec-timeout 60 0
password
transport input all
line vty 5 924
exec-timeout 60 0
password
transport input all
scheduler allocate 20000 1000
ntp access-group
ntp server
ntp server
ntp server
ntp server

Similar Messages

Error in voice router

voice router 3745
flash:c3745-ipvoice-mz.124-1.1.bin
i am getting the error and router restarted automatically
Apr 15 02:52:22: %DSPRM-5-SETCODEC: Configured codec 8 is not supported with this dsp image
kindly help to sort out this issue

Hi,
can you upgrade to latest 12.4 and try again ?

Voice Routing: Normalization Rule vs. Route

We're just testing some Enterprise Voice stuff within our Lync Environment but there's still one Thing not clear to me: On the specific user tab, we're able to assign a "Dial plan policy" and a "Voice policy"
In the Dial plan policy we're able to enter the normalization rules for Digit Manipulation.
In the Voice policy we can assign routes the call will take (e.g trunk).
But for example if there is a normalization rule which translates +402221111 to 1111 and on the route there are just numbers allowed starting with 1, why the call will fail? In my opinion the number should be translated to 1111 right after dialing and
this should match the proper route.
Can someone describe how the callflow is working in Detail. Will it maybe check for the specific route before there is any Digit Manipulation process?
Thanks in advance

Typically you'd do it the other way around, you'd translate 1111 to +402221111 so that it's in proper E.164 format, and you'd have your routes match that.
What you described should work though, at a very high non-mechanical level:
A number is typed into Lync
The number is normalized by the users dial plan (typically to a standard such as E.165)
The normalized number is compared against the voice policy, which will match if it finds a route that matches that's tied to the policy through a PSTN usage.
An INVITE is sent through the trunk using the path determined.
What kind of errors are you getting and do you get a "pass" in the Lync Control Panel -> Voice Routing -> Test Voice Routing when you enter the information? If not, you've got a typo or misconfiguration somewhere and giving more detail
will help.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications
This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

PXE T01 file not found PXE E3B TFTP Error file not found error

Hi,
I was trying to deploy OS through SCCM . i have made DHCP server and SCCM PC one PCst when i am trying to boot from client to DHCP by f12 i am getting following error. so that i have been completed following steps
TFTP
PXE-T01: File not found
PXE:E3B: TFTP Error- File not found
1)Removed WDS service and reconfigured
2)PXE role removed and re assigned
3)renamed temp folder
4)DP updated
suppose if i am trying to access the port throgh telnet
i am getting
C:\Documents and Settings\Administrator>telnet 192.168.1.65 60
Connecting To 192.168.1.65...Could not open connection to the host, on port 60:
Connect failed
C:\Documents and Settings\Administrator>telnet 192.168.1.65 67
Connecting To 192.168.1.65...Could not open connection to the host, on port 67:
Connect failed
C:\Documents and Settings\Administrator>telnet 192.168.1.65 66
Connecting To 192.168.1.65...Could not open connection to the host, on port 66:
Connect failed
C:\Documents and Settings\Administrator>telnet 192.168.1.65 65
Connecting To 192.168.1.65...Could not open connection to the host, on port 65:
Connect failed
SCCM PXEsetup.log
====================================================================
<05-17-2011 22:02:14> SMSPXE Setup Started....
<05-17-2011 22:02:14> Parameters: C:\PROGRA~1\MICROS~4\bin\i386\ROLESE~1.EXE /install /siteserver:DRDO-QQLUVGDI0P SMSPXE
<05-17-2011 22:02:14> Installing Pre Reqs for SMSPXE
<05-17-2011 22:02:14>         ======== Installing Pre Reqs for Role SMSPXE ========
<05-17-2011 22:02:14> Found 2 Pre Reqs for Role SMSPXE
<05-17-2011 22:02:14> Pre Req MSXML60 found.
<05-17-2011 22:02:14> MSXML60 already installed (Product Code: {A43BF6A5-D5F0-4AAA-BF41-65995063EC44}). Would not install again.
<05-17-2011 22:02:14> Pre Req MSXML60 is already installed. Skipping it.
<05-17-2011 22:02:14> Pre Req Wimgapi found.
<05-17-2011 22:02:14> Wimgapi already installed (Product Code: {721ABC3B-5F12-4332-9C0C-C11424EF666C}). Would not install again.
<05-17-2011 22:02:14> Pre Req Wimgapi is already installed. Skipping it.
<05-17-2011 22:02:14>         ======== Completed Installion of Pre Reqs for Role SMSPXE ========
<05-17-2011 22:02:14> Installing the SMSPXE
<05-17-2011 22:02:14> Machine is running Windows 2003 SP1 or later. (NTVersion=0X502, ServicePack=2)
<05-17-2011 22:02:14> Error - WDS is not installed. Installation cannot continue
<05-17-2011 23:02:35> ====================================================================
<05-17-2011 23:02:35> SMSPXE Setup Started....
<05-17-2011 23:02:35> Parameters: C:\PROGRA~1\MICROS~4\bin\i386\ROLESE~1.EXE /install /siteserver:DRDO-QQLUVGDI0P SMSPXE
<05-17-2011 23:02:35> Installing Pre Reqs for SMSPXE
<05-17-2011 23:02:35>         ======== Installing Pre Reqs for Role SMSPXE ========
<05-17-2011 23:02:35> Found 2 Pre Reqs for Role SMSPXE
<05-17-2011 23:02:35> Pre Req MSXML60 found.
<05-17-2011 23:02:35> MSXML60 already installed (Product Code: {A43BF6A5-D5F0-4AAA-BF41-65995063EC44}). Would not install again.
<05-17-2011 23:02:35> Pre Req MSXML60 is already installed. Skipping it.
<05-17-2011 23:02:35> Pre Req Wimgapi found.
<05-17-2011 23:02:35> Wimgapi already installed (Product Code: {721ABC3B-5F12-4332-9C0C-C11424EF666C}). Would not install again.
<05-17-2011 23:02:35> Pre Req Wimgapi is already installed. Skipping it.
<05-17-2011 23:02:35>         ======== Completed Installion of Pre Reqs for Role SMSPXE ========
<05-17-2011 23:02:35> Installing the SMSPXE
<05-17-2011 23:02:35> Machine is running Windows 2003 SP1 or later. (NTVersion=0X502, ServicePack=2)
<05-17-2011 23:02:35> Error - WDS is not installed. Installation cannot continue
<05-17-2011 23:38:26> ====================================================================
<05-17-2011 23:38:26> SMSPXE Setup Started....
<05-17-2011 23:38:26> Parameters: C:\PROGRA~1\MICROS~4\bin\i386\ROLESE~1.EXE /install /siteserver:DRDO-QQLUVGDI0P SMSPXE
<05-17-2011 23:38:26> Installing Pre Reqs for SMSPXE
<05-17-2011 23:38:26>         ======== Installing Pre Reqs for Role SMSPXE ========
<05-17-2011 23:38:26> Found 2 Pre Reqs for Role SMSPXE
<05-17-2011 23:38:26> Pre Req MSXML60 found.
<05-17-2011 23:38:26> MSXML60 already installed (Product Code: {A43BF6A5-D5F0-4AAA-BF41-65995063EC44}). Would not install again.
<05-17-2011 23:38:26> Pre Req MSXML60 is already installed. Skipping it.
<05-17-2011 23:38:26> Pre Req Wimgapi found.
<05-17-2011 23:38:26> Wimgapi already installed (Product Code: {721ABC3B-5F12-4332-9C0C-C11424EF666C}). Would not install again.
<05-17-2011 23:38:26> Pre Req Wimgapi is already installed. Skipping it.
<05-17-2011 23:38:26>         ======== Completed Installion of Pre Reqs for Role SMSPXE ========
<05-17-2011 23:38:26> Installing the SMSPXE
<05-17-2011 23:38:26> Machine is running Windows 2003 SP1 or later. (NTVersion=0X502, ServicePack=2)
<05-17-2011 23:38:26> WDS Service is installed.
<05-17-2011 23:38:26> No versions of SMSPXE are installed. Installing new SMSPXE.
<05-17-2011 23:38:26> Enabling MSI logging. pxe.msi will log to C:\Program Files\Microsoft Configuration Manager\logs\pxeMSI.log
<05-17-2011 23:38:26> Installing C:\Program Files\Microsoft Configuration Manager\bin\i386\pxe.msi CCMINSTALLDIR="C:\Program Files\SMS_CCM" PXEENABLELOGGING=TRUE PXELOGLEVEL=1 PXELOGMAXSIZE=1000000 PXELOGMAXHISTORY=1
<05-17-2011 23:39:47> pxe.msi exited with return code: 0
<05-17-2011 23:39:47> Installation was successful.
<05-18-2011 22:20:04> ====================================================================
<05-18-2011 22:20:04> SMSPXE Setup Started....
<05-18-2011 22:20:04> Parameters: C:\PROGRA~1\MICROS~4\bin\i386\ROLESE~1.EXE /deinstall /siteserver:DRDO-QQLUVGDI0P SMSPXE
<05-18-2011 22:20:04> Deinstalling the SMSPXE
<05-18-2011 22:20:04> Enabling MSI logging. pxe.msi will log to C:\Program Files\Microsoft Configuration Manager\logs\pxeMSI.log
<05-18-2011 22:20:04> Deinstalling SMSPXE, with product code {C63C1FBD-C9C8-469D-8ADE-12387FB5EA75}
<05-18-2011 22:20:15> SMSPXE deinstall exited with return code: 0
<05-18-2011 22:20:15> Deinstallation was successful.
<05-18-2011 22:20:15> Removing PXE Registry.
<05-18-2011 22:23:18> ====================================================================
<05-18-2011 22:23:18> SMSPXE Setup Started....
<05-18-2011 22:23:18> Parameters: C:\PROGRA~1\MICROS~4\bin\i386\ROLESE~1.EXE /install /siteserver:DRDO-QQLUVGDI0P SMSPXE
<05-18-2011 22:23:18> Installing Pre Reqs for SMSPXE
<05-18-2011 22:23:18>         ======== Installing Pre Reqs for Role SMSPXE ========
<05-18-2011 22:23:18> Found 2 Pre Reqs for Role SMSPXE
<05-18-2011 22:23:18> Pre Req MSXML60 found.
<05-18-2011 22:23:18> MSXML60 already installed (Product Code: {A43BF6A5-D5F0-4AAA-BF41-65995063EC44}). Would not install again.
<05-18-2011 22:23:18> Pre Req MSXML60 is already installed. Skipping it.
<05-18-2011 22:23:18> Pre Req Wimgapi found.
<05-18-2011 22:23:18> Wimgapi already installed (Product Code: {721ABC3B-5F12-4332-9C0C-C11424EF666C}). Would not install again.
<05-18-2011 22:23:18> Pre Req Wimgapi is already installed. Skipping it.
<05-18-2011 22:23:18>         ======== Completed Installion of Pre Reqs for Role SMSPXE ========
<05-18-2011 22:23:18> Installing the SMSPXE
<05-18-2011 22:23:18> Machine is running Windows 2003 SP1 or later. (NTVersion=0X502, ServicePack=2)
<05-18-2011 22:23:18> WDS Service is installed.
<05-18-2011 22:23:18> No versions of SMSPXE are installed. Installing new SMSPXE.
<05-18-2011 22:23:18> Enabling MSI logging. pxe.msi will log to C:\Program Files\Microsoft Configuration Manager\logs\pxeMSI.log
<05-18-2011 22:23:18> Installing C:\Program Files\Microsoft Configuration Manager\bin\i386\pxe.msi CCMINSTALLDIR="C:\Program Files\SMS_CCM" PXEENABLELOGGING=TRUE PXELOGLEVEL=1 PXELOGMAXSIZE=1000000 PXELOGMAXHISTORY=1
<05-18-2011 22:24:11> pxe.msi exited with return code: 0
<05-18-2011 22:24:11> Installation was successful.
<05-18-2011 22:31:06> ====================================================================
<05-18-2011 22:31:06> SMSPXE Setup Started....
<05-18-2011 22:31:06> Parameters: C:\PROGRA~1\MICROS~4\bin\i386\ROLESE~1.EXE /install /siteserver:DRDO-QQLUVGDI0P SMSPXE
<05-18-2011 22:31:06> Installing Pre Reqs for SMSPXE
<05-18-2011 22:31:06>         ======== Installing Pre Reqs for Role SMSPXE ========
<05-18-2011 22:31:06> Found 2 Pre Reqs for Role SMSPXE
<05-18-2011 22:31:06> Pre Req MSXML60 found.
<05-18-2011 22:31:06> MSXML60 already installed (Product Code: {A43BF6A5-D5F0-4AAA-BF41-65995063EC44}). Would not install again.
<05-18-2011 22:31:06> Pre Req MSXML60 is already installed. Skipping it.
<05-18-2011 22:31:06> Pre Req Wimgapi found.
<05-18-2011 22:31:06> Wimgapi already installed (Product Code: {721ABC3B-5F12-4332-9C0C-C11424EF666C}). Would not install again.
<05-18-2011 22:31:06> Pre Req Wimgapi is already installed. Skipping it.
<05-18-2011 22:31:06>         ======== Completed Installion of Pre Reqs for Role SMSPXE ========
<05-18-2011 22:31:06> Installing the SMSPXE
<05-18-2011 22:31:06> Machine is running Windows 2003 SP1 or later. (NTVersion=0X502, ServicePack=2)
<05-18-2011 22:31:06> WDS Service is installed.
<05-18-2011 22:31:06> SMSPXE already installed (Product Code: {C63C1FBD-C9C8-469D-8ADE-12387FB5EA75}). Upgrading/Reinstalling SMSPXE
<05-18-2011 22:31:06> New SMSPXE is the same product code. This is a minor upgrade.
<05-18-2011 22:31:06> Enabling MSI logging. pxe.msi will log to C:\Program Files\Microsoft Configuration Manager\logs\pxeMSI.log
<05-18-2011 22:31:06> Installing C:\Program Files\Microsoft Configuration Manager\bin\i386\pxe.msi REINSTALL=ALL REINSTALLMODE=vmaus CCMINSTALLDIR="C:\Program Files\SMS_CCM" PXEENABLELOGGING=TRUE PXELOGLEVEL=1 PXELOGMAXSIZE=1000000 PXELOGMAXHISTORY=1
<05-18-2011 22:35:43> pxe.msi exited with return code: 0
<05-18-2011 22:35:43> Installation was successful.
<05-18-2011 23:41:19> ====================================================================
<05-18-2011 23:41:19> SMSPXE Setup Started....
<05-18-2011 23:41:19> Parameters: C:\PROGRA~1\MICROS~4\bin\i386\ROLESE~1.EXE /deinstall /siteserver:DRDO-QQLUVGDI0P SMSPXE
<05-18-2011 23:41:19> Deinstalling the SMSPXE
<05-18-2011 23:41:19> Enabling MSI logging. pxe.msi will log to C:\Program Files\Microsoft Configuration Manager\logs\pxeMSI.log
<05-18-2011 23:41:19> Deinstalling SMSPXE, with product code {C63C1FBD-C9C8-469D-8ADE-12387FB5EA75}
<05-18-2011 23:41:33> SMSPXE deinstall exited with return code: 0
<05-18-2011 23:41:33> Deinstallation was successful.
<05-18-2011 23:41:33> Removing PXE Registry.
<05-19-2011 00:38:50> ====================================================================
<05-19-2011 00:38:50> SMSPXE Setup Started....
<05-19-2011 00:38:50> Parameters: C:\PROGRA~1\MICROS~4\bin\i386\ROLESE~1.EXE /install /siteserver:DRDO-QQLUVGDI0P SMSPXE
<05-19-2011 00:38:50> Installing Pre Reqs for SMSPXE
<05-19-2011 00:38:50>         ======== Installing Pre Reqs for Role SMSPXE ========
<05-19-2011 00:38:50> Found 2 Pre Reqs for Role SMSPXE
<05-19-2011 00:38:50> Pre Req MSXML60 found.
<05-19-2011 00:38:50> MSXML60 already installed (Product Code: {A43BF6A5-D5F0-4AAA-BF41-65995063EC44}). Would not install again.
<05-19-2011 00:38:50> Pre Req MSXML60 is already installed. Skipping it.
<05-19-2011 00:38:50> Pre Req Wimgapi found.
<05-19-2011 00:38:50> Wimgapi already installed (Product Code: {721ABC3B-5F12-4332-9C0C-C11424EF666C}). Would not install again.
<05-19-2011 00:38:50> Pre Req Wimgapi is already installed. Skipping it.
<05-19-2011 00:38:50>         ======== Completed Installion of Pre Reqs for Role SMSPXE ========
<05-19-2011 00:38:50> Installing the SMSPXE
<05-19-2011 00:38:50> Machine is running Windows 2003 SP1 or later. (NTVersion=0X502, ServicePack=2)
<05-19-2011 00:38:50> WDS Service is installed.
<05-19-2011 00:38:50> No versions of SMSPXE are installed. Installing new SMSPXE.
<05-19-2011 00:38:50> Enabling MSI logging. pxe.msi will log to C:\Program Files\Microsoft Configuration Manager\logs\pxeMSI.log
<05-19-2011 00:38:50> Installing C:\Program Files\Microsoft Configuration Manager\bin\i386\pxe.msi CCMINSTALLDIR="C:\Program Files\SMS_CCM" PXEENABLELOGGING=TRUE PXELOGLEVEL=1 PXELOGMAXSIZE=1000000 PXELOGMAXHISTORY=1
<05-19-2011 00:39:15> pxe.msi exited with return code: 0
<05-19-2011 00:39:15> Installation was successful.

I have similar issue same above error but this error i am getting intermittent keeping trying 2 or 3 times i get F12 option to boot the network services
TFTP
PXE-T01 The specified file not found
PXE-E3B TFTP Error : File not found
Our environment have DHCP configured In Inflobox and the Primary site server and PXE DP server located in Same Subnet and configured 2008 R2 sp1 and configured SCCM2012 in VM environment
I tried all the Options uninstall and re-install no luck and i have tried to increase Tramsmiit and recive Buffer size in lan card but the issue is not resolved.
Capture smspxe log when it found boot image the pxe working ,when it not found getting TFTP error.
SMSPxe log says no errors but getting client Pxe TFTP error file not found (Since its not looking Image throw out TFTP error)
Client boot action reply: <ClientIDReply><Identification Unknown="0" ItemKey="16777230" ServerName="" ServerRemoteName=""><Machine><ClientID>GUID:49D9F374-7606-4277-8AE9-FEE608FFB01E</ClientID><NetbiosName/></Machine></Identification><PXEBootAction
LastPXEAdvertisementID="" LastPXEAdvertisementTime="" OfferID="SGP20001" OfferIDTime="6/25/2012 11:09:00 AM" PkgID="SGP00009" PackageVersion="" PackagePath="http://XXX.company.com/SMS_DP_SMSPKG$/SGP00004" BootImageID="SGP00004" Mandatory="0"/></ClientIDReply>
Client Identity: 9c7f0d6a-58dd-4cda-a4f0-3f66316067fb
PXE::CBootImageManager::FindMatchingArchitectureBootImage
Set media certificate in transport
Set authenticator in transport
SMSPxe log says no errors t i can able to do pxe Log found Boot image
Client boot action reply: <ClientIDReply><Identification Unknown="0" ItemKey="16777230" ServerName="" ServerRemoteName=""><Machine><ClientID>GUID:49D9F374-7606-4277-8AE9-FEE608FFB01E</ClientID><NetbiosName/></Machine></Identification><PXEBootAction
LastPXEAdvertisementID="" LastPXEAdvertisementTime="" OfferID="SGP20001" OfferIDTime="6/25/2012 11:09:00 AM" PkgID="SGP00009" PackageVersion="" PackagePath="http://xxx.company.com/SMS_DP_SMSPKG$/SGP00004" BootImageID="SGP00004" Mandatory="0"/></ClientIDReply>
Client Identity: 9c7f0d6a-58dd-4cda-a4f0-3f66316067fb
PXE::CBootImageManager::FindMatchingArchitectureBootImage
PXE::CBootImageManager::FindBootImage: SGP00004
Looking for bootImage SGP00004
PXE::CBootImageCache::FindImage
PXE::CBootImageInfo::UpdateAccessTime
Appreciate if you could provide some solution
Ksrini

Solaris 10 x86 Jumpstart TFTP error not defined!!!!

I have a solaris 10 jumpstart sparc that does all x86 installs. Until now it has been working fine. I now have to jumpstart two new clients a sun X4200 and an X2100. However I cannot get past the loading of the miniroot. It finds the menu.lst.MACRONAME ok, I see the Solaris 10 jumpstart title and then all I see is a number of dots appearing on the client screen and then nothing.
From the snoop I only get TFTP Error: Not Defined. I have logged a call with Sun but no luck there as yet! Does anyone have any ideas?
Many thanks in advance
Sofia
Message was edited by:
sofiahaaken

Yes, the current x86 miniroot from sol 10 06/06 does not contain all the necessary drivers for the X2100 which is an amd64. So it is either unpacking the miniroot and repacking it with the appropriate drivers that are contained in the SUNWnge package or do the manual install and then add them from the supplementary cd that contains these specific drivers. SUN has recorded the incident and they will fix it with the next releases I have been told.

Distribution point, a TFTP error message

Hello,
I have a problem when I tried to migrate
a computer via PXE Network in an Annex or
there is a distribution point, a TFTP
error message appears as follows:
PXE-E32: TFTP
open timeout.
TFTP.
knowing that this problem does not arise
at the main site.
please help me and thank you in advance.
cdt.
Rayo_Muchacho

As Torsten mentionned, review the requirements for PXE boot.
http://prajwaldesai.com/boot-images-distribution-point-configuration-osd-sccm-2012-r2/
http://gerryhampsoncm.blogspot.ca/2013/02/sccm-2012-sp1-step-by-step-guide-part_9487.html
Benoit Lecours | Blog: System Center Dudes

What is the command to check if there are any active calls before restarting the voice router?

what is the command to check if there are any active calls before restarting the voice router? thanks

Hi.
I can suggest show call active voice or show voice call status or show sip-ua call brief in case of SIP TSP.
HTH
Regards.
Carlo

TFTP:Error:not defined

I have a sol10 jumpstart server for x86 sol10 clients. It has been working find until now. I now have two clients an X4200 and an X2100 to jumpstart but I get the following main error after it reads the menu.lst and before it loads the miniroot:
dhcpclient01 -> jstartx86 TFTP Error: not defined^
Any ideas?
Many thanks in advance
Sofia
The snoop output follows
jstartx86 -> lntrs237 TELNET R port=52667 dhcpclient01 -> jsta^M
lntrs237 -> jstartx86 TELNET C port=52667 ^M
jstartx86 -> dhcpclient01 TFTP Data block 78 (1456 bytes)^M
dhcpclient01 -> jstartx86 TFTP Ack block 78^M
jstartx86 -> dhcpclient01 TFTP Data block 79 (1456 bytes)^M
dhcpclient01 -> jstartx86 TFTP Ack block 79^M
jstartx86 -> dhcpclient01 TFTP Data block 80 (1456 bytes)^M
dhcpclient01 -> jstartx86 TFTP Ack block 80^M
jstartx86 -> dhcpclient01 TFTP Data block 81 (1456 bytes)^M
dhcpclient01 -> jstartx86 TFTP Ack block 81^M
jstartx86 -> dhcpclient01 TFTP Data block 82 (1376 bytes)^M
dhcpclient01 -> jstartx86 TFTP Ack block 82^M
dhcpclient01 -> jstartx86 TFTP Read "menu.lst.0100E0815AEB1C" (octet)^M
jstartx86 -> dhcpclient01 UDP D=2072 S=38112 LEN=20^M
dhcpclient01 -> jstartx86 TFTP Error: not defined^M
dhcpclient01 -> jstartx86 TFTP Read "menu.lst.0100E0815AEB1C" (octet)^M
jstartx86 -> dhcpclient01 UDP D=2073 S=38113 LEN=23^M
dhcpclient01 -> jstartx86 TFTP Ack block 0^M
jstartx86 -> dhcpclient01 TFTP Data block 1 (412 bytes) (last block)^M
dhcpclient01 -> jstartx86 TFTP Ack block 1^M
dhcpclient01 -> jstartx86 TFTP Read "menu.lst.0100E0815AEB1C" (octet)^M
jstartx86 -> dhcpclient01 UDP D=2074 S=38114 LEN=20^M
dhcpclient01 -> jstartx86 TFTP Error: not defined^M
dhcpclient01 -> jstartx86 TFTP Read "menu.lst.0100E0815AEB1C" (octet)^M
jstartx86 -> dhcpclient01 UDP D=2075 S=38115 LEN=23^M
dhcpclient01 -> jstartx86 TFTP Ack block 0^M
jstartx86 -> dhcpclient01 TFTP Data block 1 (412 bytes) (last block)^M

Yes, the current x86 miniroot from sol 10 06/06 does not contain all the necessary drivers for the X2100 which is an amd64. So it is either unpacking the miniroot and repacking it with the appropriate drivers that are contained in the SUNWnge package or do the manual install and then add them from the supplementary cd that contains these specific drivers. SUN has recorded the incident and they will fix it with the next releases I have been told.

Routing Error - Scheduled ECO for Alternate Routing

Hi,
I'm creating routing using API ( and manually too, get same result)
Error Message Says:
ALT-2 routing for item 13662020 is pending from change notice 1475023.You must either make all changes to it through change notices or implement 1475023 first.
ALT-2 is the alternate I'm creating for item Routing 13662020 . I want to ask what is the link between ECO and Routing Alternate.
The ECO 1475023 has Alternat ALT-2 in it.
Thanks
Manu

The ECO 1475023 is trying to change the routing and you are trying to change it too.
So Oracle asks you to either implement or cancel the ECO.
The link is the change_notice field in the bom_operation_sequences table.
If you open the routing screen, change the drop down at the top from current/future to all and also uncheck the implemented box.
You will see the unimplemented changes.
Hope this answers your question,
Sandeep Gandhi

Error 322 when installing new router

I encounter this error when installing my new router. It says that my new router is not detected or something. Actually, after step 4, its says : New router or gateway not detected.
What should I do or check?
Thanks

Hey first of all try resetting the router reset button in such a way that power
light is blinking on the router & then do a complete network power
cycle i.e., unplug the power cables from the modem & from the router &
then plug in the power cable to the modem first once all the lights are
solid green you could plug in the power cable to the router & check out
it will definately work!!

Can i get help on how I can successfully install the new google voice video chat software. I keep having an install error. My google voice phone always worked until a week ago when suddenly google would not let me call out from any browser

Can i get help on how I can successfully install the new google voice video chat software. I keep having an install error. My google voice phone always worked until a week ago when suddenly google would not let me call out from any browser until I installed their new google voice and video chat (made by vidyo) software. I was told by genius bar to install Yosemite, which I did. But that did not solve the problem. I removed macKeeper, as well, since a techie friend told me that could be the cause. Nothing so far has worked. When the problem first happened, it seemed to only happen in Chrome. Google voice calling out worked fine in safari, for about a day or so. Now I cannot call out from any browser. I can, however receive calls, and make calls within the video hangout.
I can be contacted directly if questions at gary at couplewise dot followed by the usual extensin

You can only suspend service for 3 months at a time (with or without payment) and only twice a year.

Voice router

i am using cisco 3745 router for voice router i am facing a problem after few days all calls are blocking once it restarted the problem we can rectify
i am using the System image file is "flash:c3745-ipvoice-mz.124-1.1.bin"
any updates of flash can reolve this issue .

Configuration for voice depends on the router platform.Make sure the configuration is fine.Refer URL
http://cisco.com/en/US/products/ps6441/products_configuration_guide_chapter09186a0080541bc6.html#wp1008931

Lync 2013 Attendant Response Group - Long Delay - Error ID 45019 LS Inbound Routing

Hello,
We have a customer who's using Lync Server 2013 with Response Groups and the SamRoxx Attendant Client. They are getting an error whereby calls made directly to users come through instantly, however attendants who take a call via the Response Group
get a 10 second delay. We are seeing
Error ID 45019 LS Inbound Routing
User ***@***.com provided a routing document with errors.
Default call handling was applied instead. Merge conflict. Wait total present in both preambles.
Problems with this user's routing documents will not be reported again for another hour.
Cause: A new or experimental user agent my have published a routing document with errors.
Resolution:
Replace the user agent that published the defective configuration.
Has anyone seen this before??
Thanks
Lync Tips Blog - [email protected] - If this post has been useful please click the green arrow to the left or click 'Propose as answer'

Hi tomcotton,
You can try steps below to troubleshoot the problem.
1. Remove the affected Lync user from the Response Group and test whether the error persists.
2. I’m not aware of
the SamRoxx Attendant Client, can you use Lync 2013 client to test and check ?
Best regards,
Eric
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Crc error between 2950 and 3620 router

I have connected the 2950 to the 3620, and the running-config of 2950 below:
2950#show running-config
Building configuration...
Current configuration : 1279 bytes
version 12.1
no service pad
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
hostname 2950
enable secret xxxx
no ip subnet-zero
no ip finger
no ip domain-lookup
interface FastEthernet0/1
duplex half
speed 10
interface FastEthernet0/2
interface FastEthernet0/23
interface FastEthernet0/24
interface FastEthernet0/24.122
interface FastEthernet0/24.123
interface Vlan1
bandwidth 10000
ip address 192.168.10.200 255.255.255.0
no ip route-cache
delay 100
ip default-gateway 192.168.10.254
no ip http server
line con 0
transport input none
line vty 0 4
password xxx
login
line vty 5 15
login
end
And the 3620 router just set the interface ethernet0/3:
interface Ethernet0/3
ip address 192.168.10.254 255.255.255.0
half-duplex
I have connected the f0/1 of switch to the eth0/3 of router. There are many crc errors between the switch and router, and try to change the duplex and speed rate, but it didn't take effect. I ensure the cable is good.
Thank you for your suggestion!

First, thank you for your notice of my problems.
Yes. When I ping from both directions, I'm seeing the CRC error only in the switch. And I have cleared the counters in both ends.
And I try to connect to another port of the router, It exists the same problem.
I'm seeing both of the input errors and CRC errors.
The interface of f0/1 (in switch)is following:
2950#show int f0/1
FastEthernet0/1 is up, line protocol is up
Hardware is Fast Ethernet, address is 0007.84fc.d1c1 (bia 0007.84fc.d
MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec,
reliability 219/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
Half-duplex, 10Mb/s
input flow-control is off, output flow-control is off
ARP type: ARPA, ARP Timeout 04:00:00
Last input 00:03:10, output 00:00:00, output hang never
Last clearing of "show interface" counters 00:11:25
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue :0/40 (size/max)
5 minute input rate 1000 bits/sec, 1 packets/sec
5 minute output rate 1000 bits/sec, 3 packets/sec
299 packets input, 39511 bytes, 0 no buffer
Received 5 broadcasts, 0 runts, 0 giants, 0 throttles
164 input errors, 164 CRC, 0 frame, 0 overrun, 33 ignored
0 input packets with dribble condition detected
1058 packets output, 81544 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier
0 output buffer failures, 0 output buffers swapped out
2950#

What does this error message mean: "Filename: Mips32.ari TFTP Error: 'File not found' in AP-105"?

Question: What does this error message mean: "Filename: Mips32.ari TFTP Error: ‘File not found’ in AP-105"?
Product and Software: This article applies to AP-105.
The root cause of this error is that the AP cannot perform a code upgrade.
Scenario 1
Check the ArubaOS code.
The minimum requirement to bring up an AP-105 is ArubaOS 3.3.3+ or ArubaOS 3.4.1+.
If the controller is running pre 3.3.3 code, upgrade the code to fix the issue.
Scenario 2
If the AP is not connected to the controller directly, bring up the AP in the controller and then connect it to the desired location. This process loads mips32.ari to the AP so that the AP can upgrade the code.
Scenario 3
The AP has no power adapter and you want to use the PoE feature. A few controller series like the 200 and 3000 Series do not support PoE. In this case, the AP cannot be terminated physically in the controller. Instead, connect the AP to the PoE switch, which is connected to the controller. Then assign a static IP configuration for the AP using the following commands:
apboot> setenv ipaddr <ip address>
apboot> setenv netmask <netmask>
apboot> setenv gatewayip <ip address of the gateway>
apboot> setenv master <ip address of the master>
apboot> setenv serverip <ip address of the TFTP server>
apboot> setenv bootcmd tftp
apboot> save
apboot> boot
Locally configure the TFTP server for the AP and load the mips32.ari file from the controller with the help of the TFTP application.

I want to download this file Mips32.ari for AP-105 device. Please give me this file download link. APBoot 1.2.4.4 (build 26618)
Built: 2011-01-07 at 13:42:04Model: AP-10x
CPU: AR7161 revision: A2
Clock: 680 MHz, DDR clock: 340 MHz, Bus clock: 170 MHz
DRAM: 128 MB
POST1: passed
Copy: done
Flash: 16 MB
PCI: scanning bus 0 ...
dev fn venID devID class rev MBAR0 MBAR1 MBAR2 MBAR3
00 00 168c 0029 00002 01 10000000 00000000 00000000 00000000
01 00 168c 0029 00002 01 10010000 00000000 00000000 00000000
Net: eth0
Radio: ar922x#0, ar922x#1Hit <Enter> to stop autoboot: 0
Checking image @ 0xbf100000
Invalid image format version: 0xffffffff
Checking image @ 0xbf800000
Invalid image format version: 0xffffffff
eth0 up: 1 Gb/s full duplex
DHCP broadcast 1
DHCP IP address: 192.168.x.xx
DHCP subnet mask: 255.255.255.0
DHCP def gateway: 192.168.x.xx
DHCP DNS server: 192.168.x.xx
DHCP DNS domain: xx
ADP multicast 1
ADP broadcast 1
ADP multicast 2
checksum bad
ADP broadcast 2
checksum bad
ADP multicast 3
checksum bad
checksum bad
checksum badRetry count exceeded
DNS request 1 for aruba-master to 192.168.x.xx
checksum bad
checksum bad
checksum bad
T Using eth0 device
TFTP from server 192.168.x.xx; our IP address is 192.168.x.xx
Filename 'mips32.ari'.
Load address: 0x2000000
Loading: checksum bad
T T checksum bad
T checksum bad
checksum bad
checksum bad
T checksum bad
checksum bad
T T checksum bad
T checksum bad
checksum bad
T T T
Retry count exceeded; starting again
eth0 up: 1 Gb/s full duplex
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum badARP Retry count exceeded; starting again
eth0 up: 1 Gb/s full duplexchecksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad ThanKs :)

TFTP error on 3925 intergrated voice router

Similar Messages

Maybe you are looking for