The server is not running  - archiver is unable...

Archiver is unable to archive a redo log because the output device is full or unavailable.
The instance is open.
1. Increase db_recovery_file_dest_size
2. Start full as backup database plus archivelog or start archive log backup than delete them.
3. If you have option delete some archive files from OS level than run crosscheck command from rman
I like to solve this issue using miainly grid control/enterprise manager
Thank you

If your database is down, you won't be able to use EM to fix the problem.

Similar Messages

  • Directories on 2 machines. Connect to 1 using console program on the other : "Cannot connect to the Admin Server.The url is not correct or the server is not running." URL is ok, server  is running.

     

    Which version of iDS ?
    Could you show us the URL ?
    I think 4.x Admin Server has the IP address of the hosts that can connect in its configuration. If both servers have 2 different configuration Directory and 2 admin servers, that is eventually where to look for a solution.
    Regards,
    Ludovic.

  • ESSBase studio server is not running

    Dear All,
    When I run ESSBase studio server, I get below error. Kindly advice me on this.
    C:\Hyperion\products\Essbase\EssbaseStudio\Server>call ""C:\Hyperion\common\config\9.5.0.0"\setJavaRuntime.bat"
    Log file location is:
    C:\Hyperion\logs\esbstudio\server.log
    18:49:34 12/29/09 INFO Starting up
    18:49:34 12/29/09 INFO Oracle Essbase Studio Server. Version 11.1.1.3.00, Build 090, June 25 2009
    18:50:41 12/29/09 (system) WARNING Failed to load driver for sap
    18:50:41 12/29/09 (system) SEVERE Cannot load Teradata connector
    18:50:41 12/29/09 (system) WARNING Failed to load driver for teradata
    18:50:41 12/29/09 (system) WARNING Failed to load driver for mysql
    18:50:41 12/29/09 (system) WARNING Failed to load driver for netezza
    18:50:41 12/29/09 (system) SEVERE Cannot initialize catalog storage. Make sure that server.properties has correct information
    -------------- Exception --------------
    com.hyperion.cp.catalog.exceptions.CatalogInitializationException: Cannot initialize data storage engine
    at com.hyperion.cp.catalog.storage.StorageFactory.initialize(StorageFactory.java:53)
    at com.hyperion.cp.catalog.Catalog.initialize(Catalog.java:97)
    at com.hyperion.cp.catalog.Catalog.initialize(Catalog.java:156)
    at com.hyperion.cp.catalog.Catalog.<init>(Catalog.java:85)
    at com.hyperion.cp.catalog.Catalog.<clinit>(Catalog.java:73)
    at java.lang.Class.forName0(Native Method)
    at java.lang.Class.forName(Class.java:164)
    at com.hyperion.cp.catalog.CatalogInitializer.run(CatalogInitializer.java:54)
    at com.hyperion.cp.server.RequestListener$SystemTask.run(RequestListener.java:1302)
    at com.hyperion.cp.server.RequestListener.runSystemTask(RequestListener.java:167)
    at com.hyperion.cp.server.RequestListener.<init>(RequestListener.java:129)
    at com.hyperion.cp.server.ServerMain.main(ServerMain.java:204)
    Caused by: com.hyperion.cp.datasources.exploration.sql.SqlExplorerException: Sql exploration exception
    at com.hyperion.cp.datasources.exploration.sql.SqlExplorer.performExploration(SqlExplorer.java:237)
    at com.hyperion.cp.datasources.exploration.sql.SqlExplorer.explore(SqlExplorer.java:143)
    at com.hyperion.cp.catalog.storage.StorageFactory.initialize(StorageFactory.java:49)
    ... 11 more
    Caused by: com.hyperion.cp.driver.util.DriverException: Data Driver for url '%s' is absent or failed to initialize. Please see server start
    p log for more information.
    at com.hyperion.cp.driver.ConnectionManager.getConnection(ConnectionManager.java:102)
    at com.hyperion.cp.driver.DriverEngine.getConnection(DriverEngine.java:60)
    at com.hyperion.cp.driver.DriverEngine.executeStringQuery(DriverEngine.java:131)
    at com.hyperion.cp.datasources.exploration.Explorer.executeStringQuery(Explorer.java:138)
    at com.hyperion.cp.datasources.exploration.sql.SqlExplorer.getCatalogs(SqlExplorer.java:456)
    at com.hyperion.cp.datasources.exploration.sql.SqlExplorer.exploreSources(SqlExplorer.java:261)
    at com.hyperion.cp.datasources.exploration.sql.SqlExplorer.performExploration(SqlExplorer.java:195)
    ... 13 more
    Thanks in advance,
    Best,
    Veeranna Ronad.

    Hi,
    The content of the server.properties is given below. Even after making suggested changes, the server is not running.
    I am running the server from the path "C:\Hyperion\products\Essbase\EssbaseStudio\Server\stopServer.bat".
    server.properties
    catalog.autoinit=true
    catalog.username=prototype_int
    transport.port=5300
    catalog.url=oracle\://10.1.126.248\:1521/ORCL
    catalog.password=T1JBQ0xF
    catalog.db=prototype_int
    server.hss.bpmApplication=BPM\:73317
    Below is the error.
    C:\Hyperion\products\Essbase\EssbaseStudio\Server>call ""C:\Hyperion\common\config\9.5.0.0"\setJavaRuntime.bat"
    Log file location is:
    C:\Hyperion\logs\esbstudio\server.log
    17:56:32 01/15/10 INFO Starting up
    17:56:32 01/15/10 INFO Oracle Essbase Studio Server. Version 11.1.1.3.00, Build 090, June 25 2009
    javax.crypto.IllegalBlockSizeException: Input length must be multiple of 8 when decrypting with padded cipher
    at com.sun.crypto.provider.SunJCE_h.b(DashoA12275)
    at com.sun.crypto.provider.SunJCE_h.b(DashoA12275)
    at com.sun.crypto.provider.DESCipher.engineDoFinal(DashoA12275)
    at javax.crypto.Cipher.doFinal(DashoA12275)
    at com.hyperion.cis.config.persistent.utils.Encrypter.decrypt(Encrypter.java:103)
    at com.hyperion.cis.config.persistent.utils.Encrypter.decryptString(Encrypter.java:130)
    at com.hyperion.cp.util.PropertyManager.getProperty(PropertyManager.java:143)
    at com.hyperion.cp.catalog.storage.StorageFactory.initialize(StorageFactory.java:33)
    at com.hyperion.cp.catalog.Catalog.initialize(Catalog.java:97)
    at com.hyperion.cp.catalog.Catalog.<init>(Catalog.java:85)
    at com.hyperion.cp.catalog.Catalog.<clinit>(Catalog.java:73)
    at java.lang.Class.forName0(Native Method)
    at java.lang.Class.forName(Class.java:164)
    at com.hyperion.cp.catalog.CatalogInitializer.run(CatalogInitializer.java:54)
    at com.hyperion.cp.server.RequestListener$SystemTask.run(RequestListener.java:1302)
    at com.hyperion.cp.server.RequestListener.runSystemTask(RequestListener.java:167)
    at com.hyperion.cp.server.RequestListener.<init>(RequestListener.java:129)
    at com.hyperion.cp.server.ServerMain.main(ServerMain.java:204)
    17:56:38 01/15/10 (system) WARNING Failed to load driver for sap
    17:56:39 01/15/10 (system) WARNING Failed to load driver for mysql
    17:56:39 01/15/10 (system) WARNING Failed to load driver for netezza
    17:56:40 01/15/10 (system) SEVERE Cannot establish connection to Oracle server
    javax.crypto.IllegalBlockSizeException: Input length must be multiple of 8 when decrypting with padded cipher
    at com.sun.crypto.provider.SunJCE_h.b(DashoA12275)
    at com.sun.crypto.provider.SunJCE_h.b(DashoA12275)
    at com.sun.crypto.provider.DESCipher.engineDoFinal(DashoA12275)
    at javax.crypto.Cipher.doFinal(DashoA12275)
    at com.hyperion.cis.config.persistent.utils.Encrypter.decrypt(Encrypter.java:103)
    at com.hyperion.cis.config.persistent.utils.Encrypter.decryptString(Encrypter.java:130)
    at com.hyperion.cp.util.PropertyManager.getProperty(PropertyManager.java:143)
    at com.hyperion.cp.catalog.storage.StorageFactory.initialize(StorageFactory.java:33)
    at com.hyperion.cp.catalog.Catalog.initialize(Catalog.java:97)
    at com.hyperion.cp.catalog.Catalog.initialize(Catalog.java:156)
    at com.hyperion.cp.catalog.Catalog.<init>(Catalog.java:85)
    at com.hyperion.cp.catalog.Catalog.<clinit>(Catalog.java:73)
    at java.lang.Class.forName0(Native Method)
    at java.lang.Class.forName(Class.java:164)
    at com.hyperion.cp.catalog.CatalogInitializer.run(CatalogInitializer.java:54)
    at com.hyperion.cp.server.RequestListener$SystemTask.run(RequestListener.java:1302)
    at com.hyperion.cp.server.RequestListener.runSystemTask(RequestListener.java:167)
    at com.hyperion.cp.server.RequestListener.<init>(RequestListener.java:129)
    at com.hyperion.cp.server.ServerMain.main(ServerMain.java:204)
    17:56:40 01/15/10 (system) SEVERE Cannot establish connection to Oracle server
    17:56:40 01/15/10 (system) SEVERE Cannot initialize catalog storage. Make sure that server.properties has correct information
    -------------- Exception --------------
    com.hyperion.cp.catalog.exceptions.CatalogInitializationException: catalog.CatalogInitializationException.StorageInitializationFailure
    at com.hyperion.cp.catalog.storage.StorageFactory.getStorageInstance(StorageFactory.java:155)
    at com.hyperion.cp.catalog.transaction.TransactionManager.initialize(TransactionManager.java:64)
    at com.hyperion.cp.catalog.Catalog.initialize(Catalog.java:98)
    at com.hyperion.cp.catalog.Catalog.initialize(Catalog.java:156)
    at com.hyperion.cp.catalog.Catalog.<init>(Catalog.java:85)
    at com.hyperion.cp.catalog.Catalog.<clinit>(Catalog.java:73)
    at java.lang.Class.forName0(Native Method)
    at java.lang.Class.forName(Class.java:164)
    at com.hyperion.cp.catalog.CatalogInitializer.run(CatalogInitializer.java:54)
    at com.hyperion.cp.server.RequestListener$SystemTask.run(RequestListener.java:1302)
    at com.hyperion.cp.server.RequestListener.runSystemTask(RequestListener.java:167)
    at com.hyperion.cp.server.RequestListener.<init>(RequestListener.java:129)
    at com.hyperion.cp.server.ServerMain.main(ServerMain.java:204)
    Caused by: java.lang.reflect.InvocationTargetException
    at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
    at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
    at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
    at java.lang.reflect.Constructor.newInstance(Constructor.java:494)
    at com.hyperion.cp.catalog.storage.StorageFactory.getStorageInstance(StorageFactory.java:149)
    ... 12 more
    Caused by: com.hyperion.cp.catalog.exceptions.CatalogInitializationException: No table PROTOTYPE_INT.CP_NONE_TRANSACTIONS found
    at com.hyperion.cp.catalog.storage.StorageEngine.validateSignature(StorageEngine.java:193)
    at com.hyperion.cp.catalog.storage.StorageEngine.<init>(StorageEngine.java:87)
    at com.hyperion.cp.catalog.storage.SQLStorageEngine.<init>(SQLStorageEngine.java:20)
    ... 17 more
    Thanks in advance,
    Best,
    Veeranna Ronad.
    Edited by: Ronad on Jan 15, 2010 4:02 PM
    Edited by: Ronad on Jan 15, 2010 5:58 PM

  • I bought a new imac running Loin and Office 2011. The server we use to access emails runs exchange 2003 and my IT person says the imac is not compatible with the server. The server does not want to let me access using any email software.

    I bought a new imac running Loin with Office 2011. I am the only mac in the office and the Server we use to access emails runs exchange 2003 and my IT person says the imac is not compatible with the server. The server does not want to let me access using any email software other than webmail access through our website. It looks as though 2011 is not compatible with 2003 per some searches online, but what are some options I have to gain full access again? I purchased parallels in hopes that this my help and I am able to use remote desktop connection to log on to server but can not drag and drop files I need. There is a shared drive on that Server we all use to exchange files.
    The two main issues are gaining access to my email again and ability to drag and drop files from mac to pc. I hope this is enough info to get some solutions.
    PS - IT person says my iMac's IP is what his server does not understand so that is why I can not login.

    Office 2011 is not compatbile with Exchange 2003.
    I suggest you post further Office related questions on Microsoft's own forums for their Mac software:
    http://answers.microsoft.com/en-us/mac

  • The Oracle BI server is not running. The repositiry had to be closed

    Hi guys,
    I have a OBI Standard Edition 10.1.3.4.1.
    I have modify the rpd and if I try to "Check In Changes", the error appears: "The Oracle BI server is not running. The repositiry had to be closed".
    In the nQServer.log this error appears:
    [nQSError: 12002] Socket communication error at call=recv: (Number=10055) An operation on a socket could not be performed because the system lacked sufficient buffer space or because a queue was full.
    Why?
    The problem persist if I restart the services.
    The problem only occurs if I make a change in the Business Model Layer. The changes in the Physical Layer do not generate errors.
    Thank you,
    Sara

    Hi Sara,
    Can you please let us know, if there are any other messages in the NQServer.out.log ? I just googled around with this code to hit at the following link : http://www.bookmark-master.com/socket-error-10055.html
    Socket error (#10055): No buffer space available.
    Analyse & Solutions:
    An operation on a socket or pipe was not performed because the system lacked sufficient buffer space or because a queue was full. This error indicates a shortage of resources on your system. It can occur if you're trying to run too many applications (of any kind) simultaneously on your machine. If this tends to occur after running certain applications for a while, it might be a symptom of an application that doesn't return system resources (like memory) properly. It may also indicate you are not closing the applications properly. If it persists, exit Windows or reboot your machine to remedy the problem.
    From the above information, I understand that this is a system resource issue. Can you please recheck if your system has got enough resources?
    Hope this helps.
    Thank you,
    Dhar

  • Unknown Host Unable to locate the server requested --- the server does not have a DNS entry. Perhaps there is a misspelling in the server name, or the server no

    Hello,
    Today i tried accessing transitbux.com with mozilla, but i'm getting this kind of a error as mentioned below:
    Unknown Host
    Description: Unable to locate the server requested --- the server does not have a DNS entry. Perhaps there is a misspelling in the server name, or the server no longer exists. Double-check the name and try again.
    Can anyone help me please, and the same website is accessible with my phone.
    Help me please. :(
    Regards
    -

    Try http://www.transitbux.com/
    Clear the cache and remove cookies only from websites that cause problems.
    "Clear the Cache":
    *Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"

  • New-SPWOPIBinding Failing with "The server did not respond"

    I am currently attempting to create a binding between my SharePoint environment and our Office Web Apps server.
    I am able to connect to the Office Web Apps server when I allow HTTP connections (on both the Web Apps Server and the SharePoint server) and create the binding using the -AllowHTTP command but am unable to connect to the server when trying over HTTPS.
    I have created a DigiCert UCC certificate for the Office Web Apps server that uses the common name of the DNS CNAME entry for the Office Web Apps server (owas.contoso.com) and includes the FQDN of the server in the SAN (saowas.contoso.local).
    I can ping the Office Web Apps server from the SharePoint server and can hit https://owas.contoso.com/hosting/discovery over HTTPS from the SharePoint server, and have disabled the firewalls on both servers.
    When I attempt to run New-SPWOPIBinding -Servername "owas.contoso.com"
    on the SharePoint server it quickly gives me the WARNING: The server did not respond.  Trying again (attempt 1 of 5)
    errors.
    Any help would be appreciated.

    You can check the ULS logs, found in the 15 hive, by default:
    %ProgramFiles%\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS
    I would recommend a log viewer though.  There are several out there (I use the first one):
    http://archive.msdn.microsoft.com/ULSViewer
    http://ulsviewer.codeplex.com/
    http://sharepointlogviewer.codeplex.com/

  • A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (p

    A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that
    the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)(Microsoft SQL Server, Error: 2)
    The system cannot find the file specified
    Cannot connect to COWBOYS.
    Here are the technical details===================================
    A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
    Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
    For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&EvtSrc=MSSQLServer&EvtID=2&LinkId=20476
    Error Number: 2
    Severity: 20
    State: 0
    Program Location:
       at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
       at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
       at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, Boolean withFailover)
       at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover)
       at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential credential, TimeoutTimer
    timeout)
       at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance)
       at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance,
    SqlConnectionString userConnectionOptions, SessionData reconnectSessionData)
       at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions)
       at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup, DbConnectionOptions userOptions)
       at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
       at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
       at System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
       at System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry)
       at System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry)
       at System.Data.SqlClient.SqlConnection.Open()
       at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerService.ValidateConnection(UIConnectionInfo ci, IServerType server)
       at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
    ===================================
    The system cannot find the file specified
    I have tried from so many forms. This is so frustrating. Thank for everyone/anyone who wants to help. So this is what happened: I had to uninstall my previous sqlserver 2012(which worked great) for some reason, and I uninstalled everything from that download.
    Then I installed the trial edition of sql server 2012 (64 Bit) and It wouldn't connect to the database. (Error mentioned above.) My local DB is COWBOYS. (COWBOYS is also my computer name.) After this, I have tried downloading sqlexpress and sqlserver 64bit
    many times and cannot connect to my local DB. 
    How do I connect to my Local DB? 
    Also, I think this might help: (When I run sqlserve.exe, which I was able to find in C:\Program Files\Microsoft SQL Server\110\LocalDB\Binn, I get an error: Your SQL server installation is either corrupt or has been tampered with(Error getting
    instance ID from name). Please uninstall then re-run setup to correct this problem.
    I would happily re install it, if it wasn't my 20th time.
    I don't have any remote connections, I don't use username/password, only window authentication. I work mostly on visual studio, but without able to store /retrieve data, I don't know how to survive.
    May be the solution is very simple, but I am too frustrated. 
    Some of the things I have tried:
    From a command prompt, enter one of the following commands:
    net start "SQL Server Agent (MSSQLSERVER)" OR 
    net start "SQL Server Agent(instancename)"(for instance)
    on my sql configuration, I cannot start anything because there is nothing there to start. I can post more details, if that would help. Also, some more details about the error:
    Details
    Product:
    SQL Server
    ID:
    2
    Source:
    MSSQLServer
    Version:
    10.0
    Component:
    SQLEngine
    Message:
    An error has occurred while establishing a connection to the server. When connecting to SQL Server, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
    40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
    Explanation
    SQL Server did not respond to the client request because the server is probably not started.
    User Action
    Make sure that the server is started.
    Version:
    9.0
    Component:
    SQLEngine
    Message:
    An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
    40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
    Explanation
    SQL Server did not respond to the client request because the server is probably not started.
    User Action
    Make sure that the server is started.
    Any one that can help me, I will be greatful. Thank you so much. p.s. please ask me anything if you have any questions.

    It sounds like there are a couple things going on here.  First check if you have a successful install of SQL Server, then we'll figure out the connection issues.
    Can you launch SQL Server Configuration Manager and check for SQL Server (MSSQLSERVER) if default instance or SQL Server (other name) if you've configured your instance as a named instance.  Once you find this, make sure the service is started. 
    If not started, try to start it and see if it throws an error.  If you get an error, post the error message your hitting.  If the service starts, you can then launch SSMS and try to connect.  If you have a default instance, you can use the machine
    name in the connection dialog.  Ex:  "COWBOYS" where Cowboys is the machine name.  However, if you named the SQL Server instance during install, you'll need to connect using the machine\instance format.  Ex:  COWBOYS\Romo (where Romo
    is the instance name you set during install).
    You can also look at the summary.txt file in the SQL Server setup error logs to see what happened on the most recent install.  Past install history is archived in the log folder if you need to dig those up to help troubleshoot, but the most
    recent one may help get to the bottom of it if there is an issue with setup detecting a prior instance that needs to be repaired.
    Thanks,
    Sam Lester (MSFT)
    http://blogs.msdn.com/b/samlester
    This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
    "Mark as Answer" and
    "Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread.

  • Error "Connection Failed The server may not exist or is not operational..."

    This is just FYI in case somebody else runs across this. On one user account, an error window would pop up every so often that said:
    Connection Failed
    The server may not exist or it is not operational at this time. Check the server name or IP address and try again.
    It turns out that the problem was caused by Screen Saver. The error popped up whenever screen saver tried to launch. On the problem account I had the "Pictures" folder selected for the screen saver, and apparently there must be an alias in that folder pointing to something on a remote server, because as soon as I go to System Preferences and open the Screen Saver panel, I get the error.
    It has been driving me crazy for months but finally I thought to look in Console, where I saw the error "afp_mount[5045] CFLog (0): CFMessagePort: bootstrap_register(): failed 1103 (0x44f), port = 0x2d03, name = 'com.apple.afp_mount.ServiceProvider'"
    Searching for that error led me to the Macosxhints forum at http://forums.macosxhints.com/archive/index.php/t-53209.html where a user had posted the same problem. Changing to a different screen saver or a different folder for pictures resolved the issue.
    PowerMac G5   Mac OS X (10.4.6)  
    PowerMac G5   Mac OS X (10.4.6)  

    Welcome to discussions leffjay. Good one. Cheers.

  • Error 2000 - The server is not compatible with this deployment client

    I'm getting an error trying to deploy a composite. It works for everyone else on the team, and our configurations are the same (as far as we can tell). We've compared JDev version info.
    Any idea what I can try? Thank you.
    [12:57:48 PM] ---- Deployment started. ----
    [12:57:48 PM] Target platform is (Weblogic 10.3).
    [12:57:48 PM] Running dependency analysis...
    [12:57:48 PM] Building...
    [12:58:05 PM] Deploying profile...
    [12:58:06 PM] Wrote Archive Module to C:\pkgs\svn\mdm\trunk\src\DRM WDK Source Code\Workflows\DrmRequestWorkflowSelection\deploy\sca_DrmRequestWorkflowSelectionComposite_rev3.0.jar
    [12:58:06 PM] Deploying sca_DrmRequestWorkflowSelectionComposite_rev3.0.jar to partition "default" on server soa_server1 [http://10.22.2.40:8001]
    [12:58:06 PM] Processing sar=/C:/pkgs/svn/mdm/trunk/src/DRM WDK Source Code/Workflows/DrmRequestWorkflowSelection/deploy/sca_DrmRequestWorkflowSelectionComposite_rev3.0.jar
    [12:58:06 PM] Adding sar file - C:\pkgs\svn\mdm\trunk\src\DRM WDK Source Code\Workflows\DrmRequestWorkflowSelection\deploy\sca_DrmRequestWorkflowSelectionComposite_rev3.0.jar
    [12:58:06 PM] Preparing to send HTTP request for deployment
    [12:58:06 PM] Creating HTTP connection to host:10.22.2.40, port:8001
    [12:58:06 PM] Sending internal deployment descriptor
    [12:58:06 PM] Sending archive - sca_DrmRequestWorkflowSelectionComposite_rev3.0.jar
    [12:58:07 PM] Error deploying archive sca_DrmRequestWorkflowSelectionComposite_rev3.0.jar to partition "default" on server soa_server1 [http://10.22.2.40:8001]
    *[12:58:07 PM] HTTP error code returned [2000]*
    *[12:58:07 PM] Error message from server:*
    The server is not compatible with this deployment client: please verify that the server is a SOA managed server and that its version is supported by this deployment client
    [12:58:07 PM] Check server log for more details.
    [12:58:07 PM] Error deploying archive sca_DrmRequestWorkflowSelectionComposite_rev3.0.jar to partition "default" on server soa_server1 [http://10.22.2.40:8001]
    [12:58:07 PM] #### Deployment incomplete. ####
    [12:58:07 PM] Error deploying archive file:/C:/pkgs/svn/mdm/trunk/src/DRM WDK Source Code/Workflows/DrmRequestWorkflowSelection/deploy/sca_DrmRequestWorkflowSelectionComposite_rev3.0.jar
    (oracle.tip.tools.ide.fabric.deploy.common.SOARemoteDeployer)
    Edited by: J Keller on Jun 6, 2013 8:03 AM

    Can anyone reply plz???

  • SCOM 2012 R2 installing on SQL 2012 SP1 - Error Code: 0x80131904, Exception.Message: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.

    Hi,
    I am getting an issue during a SCOM 2012 R2 installation while creating the SCOM DataWarehouse database. Setup seems to timeout during creating the datawarehouse database. I can see all database files created in windows explorer on the SQL server before
    setup rolls the SCOM install back.
    Has anyone seen this issue before or know how to help resolve it?
    Appreciate your help, below is the SCOM installation log:
    Thanks
    Marc
    [13:27:27]: Always: :Creating Database: OperationsManagerDW
    [13:35:28]: Warn: :Warning:Retry on SQL error -2: Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.
    [13:43:28]: Warn: :Warning:Retry on SQL error -2: Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.
    [13:51:29]: Warn: :Warning:Retry on SQL error -2: Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.
    [13:59:30]: Warn: :Warning:Retry on SQL error -2: Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.
    [14:07:30]: Warn: :Warning:Retry on SQL error -2: Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.
    [14:15:31]: Warn: :Warning:Retry on SQL error -2: Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.
    [14:23:31]: Warn: :Warning:Retry on SQL error -2: Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.
    [14:31:32]: Warn: :Warning:Retry on SQL error -2: Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.
    [14:39:32]: Warn: :Warning:Retry on SQL error -2: Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.
    [14:47:33]: Warn: :Warning:Retry on SQL error -2: Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.
    [14:55:33]: Error: :DB operations failed with SQL error -2: Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.
    : Threw Exception.Type: System.Data.SqlClient.SqlException, Exception Error Code: 0x80131904, Exception.Message: Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.
    [14:55:33]: Error: :StackTrace:   at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
       at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
       at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
       at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
       at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, SqlDataReader ds)
       at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
       at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean asyncWrite)
       at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.ExecuteNonQuery(SqlCommand sqlCommand, Int32& result)
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.Execute[T](SqlCommand sqlCommand, SqlRetryPolicy retryPolicy, GenericExecute`1 genericExecute)
    [14:55:33]: Error: :Inner Exception.Type: System.ComponentModel.Win32Exception, Exception Error Code: 0x80131904, Exception.Message: The wait operation timed out
    [14:55:33]: Error: :InnerException.StackTrace:
    [14:55:33]: Error: :Error:Failed to execute sql command. Setup has reached maximum retry limit.
    [14:55:33]: Warn: :Sql error: 11. Error: -2. Error Message: Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.
    [14:55:33]: Error: :Exception running sql string
    DECLARE @sql NVARCHAR(MAX);
    SET @sql = 'CREATE DATABASE ' + QUOTENAME(@DatabaseName) + '
        ON PRIMARY(NAME=MOM_DATA,FILENAME=''' + REPLACE(@Filename, '''', '''''') + ''',SIZE=' + CAST(@Size AS VARCHAR) + 'MB,MAXSIZE=UNLIMITED,FILEGROWTH=' + CAST(@FileGrowth AS VARCHAR) + 'MB)
        LOG ON(NAME=MOM_LOG, FILENAME=''' + REPLACE(@LogFilename, '''', '''''') + ''',SIZE=' + CAST(@LogSize AS VARCHAR) + 'MB,MAXSIZE=UNLIMITED,FILEGROWTH=' + CAST(@LogFileGrowth AS VARCHAR) + 'MB)';
    EXEC(@sql);: Threw Exception.Type: System.Data.SqlClient.SqlException, Exception Error Code: 0x80131904, Exception.Message: Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.
    [14:55:33]: Error: :StackTrace:   at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
       at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
       at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
       at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
       at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, SqlDataReader ds)
       at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
       at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean asyncWrite)
       at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.ExecuteNonQuery(SqlCommand sqlCommand, Int32& result)
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.Execute[T](SqlCommand sqlCommand, SqlRetryPolicy retryPolicy, GenericExecute`1 genericExecute)
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.DBConfigurationHelper.DBConfiguration.RunSqlCommandsList(IEnumerable`1 sqlCommands)
    [14:55:33]: Error: :Inner Exception.Type: System.ComponentModel.Win32Exception, Exception Error Code: 0x80131904, Exception.Message: The wait operation timed out
    [14:55:33]: Error: :InnerException.StackTrace:
    [14:55:33]: Always: :Failed to create and configure the DB with exception.: Threw Exception.Type: System.Data.SqlClient.SqlException, Exception Error Code: 0x80131904, Exception.Message: Timeout expired.  The timeout period elapsed prior to completion
    of the operation or the server is not responding.
    [14:55:33]: Always: :StackTrace:   at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
       at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
       at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
       at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
       at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, SqlDataReader ds)
       at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
       at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean asyncWrite)
       at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.ExecuteNonQuery(SqlCommand sqlCommand, Int32& result)
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.Execute[T](SqlCommand sqlCommand, SqlRetryPolicy retryPolicy, GenericExecute`1 genericExecute)
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.DBConfigurationHelper.DBConfiguration.RunSqlCommandsList(IEnumerable`1 sqlCommands)
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.DWConfigurationHelper.DWConfigurationProcessor.RunAdminScripts(String sqlServerInstance, Nullable`1 port, String databaseName, Int64 dbSize, Int64 logSize, String dbPath, String logPath)
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.DWConfigurationHelper.DWConfigurationProcessor.ConfigureDataWarehouseDatabase(String sqlServerInstance, Nullable`1 port, String databaseName, Int64 dbSize, Int64 logSize, String dbPath,
    String logPath)
    [14:55:33]: Always: :Inner Exception.Type: System.ComponentModel.Win32Exception, Exception Error Code: 0x80131904, Exception.Message: The wait operation timed out
    [14:55:33]: Always: :InnerException.StackTrace:
    [14:55:33]: Error: :CreateDataWarehouse failed: Threw Exception.Type: System.Data.SqlClient.SqlException, Exception Error Code: 0x80131904, Exception.Message: Timeout expired.  The timeout period elapsed prior to completion of the operation or
    the server is not responding.
    [14:55:33]: Error: :StackTrace:   at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
       at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
       at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
       at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
       at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, SqlDataReader ds)
       at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
       at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean asyncWrite)
       at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.ExecuteNonQuery(SqlCommand sqlCommand, Int32& result)
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.Execute[T](SqlCommand sqlCommand, SqlRetryPolicy retryPolicy, GenericExecute`1 genericExecute)
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.DBConfigurationHelper.DBConfiguration.RunSqlCommandsList(IEnumerable`1 sqlCommands)
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.DWConfigurationHelper.DWConfigurationProcessor.RunAdminScripts(String sqlServerInstance, Nullable`1 port, String databaseName, Int64 dbSize, Int64 logSize, String dbPath, String logPath)
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.DWConfigurationHelper.DWConfigurationProcessor.ConfigureDataWarehouseDatabase(String sqlServerInstance, Nullable`1 port, String databaseName, Int64 dbSize, Int64 logSize, String dbPath,
    String logPath)
       at Microsoft.SystemCenter.Essentials.SetupFramework.InstallItemsDelegates.OMDataWarehouseProcessor.CreateDataWarehouse()
    [14:55:33]: Error: :Inner Exception.Type: System.ComponentModel.Win32Exception, Exception Error Code: 0x80131904, Exception.Message: The wait operation timed out
    [14:55:33]: Error: :InnerException.StackTrace:
    [14:55:33]: Error: :FATAL ACTION: CreateDataWarehouse
    [14:55:33]: Error: :FATAL ACTION: DWInstallActionsPostProcessor
    [14:55:33]: Error: :ProcessInstalls: Running the PostProcessDelegate returned false.
    [14:55:33]: Always: :SetErrorType: Setting VitalFailure. currentInstallItem: Data Warehouse Configuration
    [14:55:33]: Error: :ProcessInstalls: Running the PostProcessDelegate for OMDATAWAREHOUSE failed.... This is a fatal item.  Setting rollback.
    marc nalder

    Hi,
    Based on the log, I recommend you use the following way to test SQL connectivity.
    You can use a UDL file to test various connectivity scenarios, create a simple text file, rename the extension from TXT to UDL, fill out the necessary information on the connection tab then test the connection, and troubleshoot as necessary
    if it fails to connect.
    For more information, please review the link below:
    The easy way to test SQL connectivity
    http://blogs.technet.com/b/michaelgriswold/archive/2014/01/06/the-easy-way-to-test-sql-connectivity.aspx
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • The security database on the server does not have a computer account for this workstation trust relationship

    When I try to log on to my DC it says "The security database on the server does not have a computer account for this workstation trust relationship". It won't let me log on. I installed another server server 2012r2  (its virtual )
    and I can get to ADSI edit. 
    I think what happened was I had a pc that could not connect without unplugging the network cable. So I found this fix 
    FIX: “The security database on the server does not have a computer account for this workstation trust relationship”2032011
    I’ve seen a lot of solutions, or suggestions rather, with regard to the error in the title of this post.  In my experience, the problem can almost always be resolved without extra domain add/removes and reboots, which is the most prevalent solution I have
    seen around.  Usually, this issue is due to a mismatch between attributes of the computer account in Active Directory and those values on the system itself.  Here are the steps I take to fix this issue when it crops up:
    Open up Active Directory Users & Computers pointed to the domain the computer account resides in
    From the “View” pull-down menu, make sure that “Advanced Features” is checked
    Navigate to the part of your organizational unit (OU) structure where the computer account for this server resides
    Open the Properties for the computer object
    Choose the “Attribute Editor” tab on the Properties dialog box
    Check the Attributes dNSHostName & servicePrincipalName – anywhere that a fully qualified hostname is specified (e.g. myserver.mydomainname.com), make sure that the entry matches the hostname
    you have configured when you go here on your server: Start -> Computer -> Right-Click, Properties -> Change Settings (under “Computer name, domain… settings”) -> Full Computer Name
    As an example, for a fictitious W2K8 R2 server whose Full Computer Name is “srv1.mydomainname.com”, these attribute/value pairs should be in Active Directory:
    dNSHostName:
    srv1.mydomainname.com
    servicePrincipalName:
    HOST/SRV1
    HOST/srv1.mydomainname.com
    RestrictedKrbHost/SRV1
    RestrictedKrbHost/srv1.mydomainname.com
    TERMSRV/SRV1
    TERMSRV/srv1.mydomainname.com"
    Not reading it carefully I add a computer with the same name as the pc having the issue and followed the above. The problem is that I did not notice that the spn did not want the name of my server (serv1) but the name of the trouble
    pc.
    dcdiag output
    PS C:\Users\administrator.TOM> dcdiag.exe
    Directory Server Diagnosis
    Performing initial setup:
       Trying to find home server...
       ***Error: DC3 is not a Directory Server.  Must specify /s:<Directory Server> or  /n:<Naming Context> or nothing to
       use the local machine.
       ERROR: Could not find home server.
    PS C:\Users\administrator.TOM> dcdiag.exe /s:DC2
    Directory Server Diagnosis
    Performing initial setup:
       * Identified AD Forest.
       Done gathering initial info.
    Doing initial required tests
       Testing server: Default-First-Site\DC2
          Starting test: Connectivity
             The host 9e0dca7a-d017-445a-b354-adee5ff53d48._msdcs.TOM could not be resolved to an IP address. Check the DN
             server, DHCP, server name, etc.
             Neither the the server name (DC2.TOM) nor the Guid DNS name (9e0dca7a-d017-445a-b354-adee5ff53d48._msdcs.TOM)
             could be resolved by DNS.  Check that the server is up and is registered correctly with the DNS server.
             Got error while checking LDAP and RPC connectivity. Please check your firewall settings.
             ......................... DC2 failed test Connectivity
    Doing primary tests
       Testing server: Default-First-Site\DC2
          Skipping all tests, because server DC2 is not responding to directory service requests.
       Running partition tests on : ForestDnsZones
          Starting test: CheckSDRefDom
             ......................... ForestDnsZones passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... ForestDnsZones passed test CrossRefValidation
       Running partition tests on : DomainDnsZones
          Starting test: CheckSDRefDom
             ......................... DomainDnsZones passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... DomainDnsZones passed test CrossRefValidation
       Running partition tests on : Schema
          Starting test: CheckSDRefDom
             ......................... Schema passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... Schema passed test CrossRefValidation
       Running partition tests on : Configuration
          Starting test: CheckSDRefDom
             ......................... Configuration passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... Configuration passed test CrossRefValidation
       Running partition tests on : TOM
          Starting test: CheckSDRefDom
             ......................... TOM passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... TOM passed test CrossRefValidation
       Running enterprise tests on : TOM
          Starting test: LocatorCheck
             ......................... TOM passed test LocatorCheck
          Starting test: Intersite
             ......................... TOM passed test Intersite
    PS C:\Users\administrator.TOM> regsvr32 schmmgmt.dll
    PS C:\Users\administrator.TOM> netdig /fix
    netdig : The term 'netdig' is not recognized as the name of a cmdlet, function, script file, or operable program.
    Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
    At line:1 char:1
    + netdig /fix
    + ~~~~~~
        + CategoryInfo          : ObjectNotFound: (netdig:String) [], CommandNotFoundException
        + FullyQualifiedErrorId : CommandNotFoundException
    PS C:\Users\administrator.TOM> Setup /PrepareSchema
    Setup : The term 'Setup' is not recognized as the name of a cmdlet, function, script file, or operable program. Check
    the spelling of the name, or if a path was included, verify that the path is correct and try again.
    At line:1 char:1
    + Setup /PrepareSchema
    + ~~~~~
        + CategoryInfo          : ObjectNotFound: (Setup:String) [], CommandNotFoundException
        + FullyQualifiedErrorId : CommandNotFoundException
    PS C:\Users\administrator.TOM> netdiag /test
    netdiag : The term 'netdiag' is not recognized as the name of a cmdlet, function, script file, or operable program.
    Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
    At line:1 char:1
    + netdiag /test
    + ~~~~~~~
        + CategoryInfo          : ObjectNotFound: (netdiag:String) [], CommandNotFoundException
        + FullyQualifiedErrorId : CommandNotFoundException
    PS C:\Users\administrator.TOM> nslooup
    nslooup : The term 'nslooup' is not recognized as the name of a cmdlet, function, script file, or operable program.
    Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
    At line:1 char:1
    + nslooup
    + ~~~~~~~
        + CategoryInfo          : ObjectNotFound: (nslooup:String) [], CommandNotFoundException
        + FullyQualifiedErrorId : CommandNotFoundException
    PS C:\Users\administrator.TOM>

    Ok fixed. 
    At a elevated cmd prompt run ;
    C:\Users\administrator.TOM>setspn -x
    As you can see the DC serv1 had duplicate SPNs.
    Checking domain DC=TOM
    Processing entry 1
    HOST/serv1.TOM is registered on these accounts:
            CN=SERV1,OU=Domain Controllers,DC=TOM
            CN=C00049,CN=Computers,DC=TOM
    {14E52635-0A95-4a5c-BDB1-E0D0C703B6C8}/TOWN-HBWJ29ZOQC is registered on these ac
    counts:
            CN=Administrator,CN=Users,DC=TOM
            CN=TOWN-HBWJ29ZOQC,CN=Computers,DC=TOM
    {14E52635-0A95-4a5c-BDB1-E0D0C703B6C8}/town-hbwj29zoqc.TOM is registered on thes
    e accounts:
            CN=Administrator,CN=Users,DC=TOM
            CN=TOWN-HBWJ29ZOQC,CN=Computers,DC=TOM
    RestrictedKrbHost/serv1 is registered on these accounts:
            CN=C00049,CN=Computers,DC=TOM
            CN=SERV1,OU=Domain Controllers,DC=TOM
    RestrictedKrbHost/serv1.TOM is registered on these accounts:
            CN=C00049,CN=Computers,DC=TOM
            CN=SERV1,OU=Domain Controllers,DC=TOM
    found 5 groups of duplicate SPNs.
    Went to the computers OU and changed computer c00049 to the correct SPN. Now I have a new issues, I'll start a new thread.

  • I have an Ipad 2 and are having problems sending out emails in one of my email address. I always get a message reading the email was not sent because the server does not allow relaying. This is an email account POP3. I have no such problem with gmail.

    I have an Ipad 2 and are having problems sending out emails in one of my email address. This is a POP3 email Account? I always get a message reading that the email was not sent because the server does not allow relaying. I have no such problem with gmail. What could be the problem and how do I resolve this. Is it about settings?
    Richard.

    Welcome to the Apple community.
    If you are unable to remember your password, security questions, don’t have access to your rescue address or are unable to reset your password for whatever reason, your only option is to contact Apple ID Support, upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.
    The operator will take you through some steps you may have already tried, however they need to be sure they have exhausted all usual approaches before trying to reset your account, so you should try to be helpful and show patience with the procedure.
    The operator will need to verify they are speaking to the account holder and may ask you some questions that only the account holder could know, and you will need to answer them if the process is to proceed.
    Once the operator has verified your identity they will send a message through to your device which contains an alpha numeric code, which you will need to read back to them.
    Once this has been completed they will send an email to your iCloud email address after a period of 24 hours, so you should check that mail is enabled in your devices iCloud settings.
    Upon receipt of the email, use the reset link provided to reset your password, after which you should be able to make the adjustments to iCloud that you wish to do.

  • Real-Time Decision Server is not running

    Hi,
    In the Admin guide for RTD Center, during Initializing the Oracle RTD Database Using SDDBTool, one of the step mentioned is "To check, Real-Time Decision Server is not running" but nothing has been mentioned if this is a Service or we have to check in Weblogic or service panel.
    So the question is, How do I check if my Real-Time Decision Server is running or not? Do I have shut down OBIEE instance for the same?
    Regards,
    Jitendra

    Hi,
    try it like this.
    http://IP:9704/ui/do/logout
    note: bi services should be up.
    Thanks
    Deva

  • Content server is not running.

    All,
    I have rather peculiar issue. The external 10.1.3.1 content server is setup against EBS 12.1.3.The content server is running fine and I was able to upload content using it. I fail to upload content all of the sudden until EBS is bounced. Nothing changes on content server side and again it works for day or two and stops and throws "Content server is not running" error. Is there any EBS configuration that can cause this behavior? I do not even see the request being logged in default-web-access-<date>.log on content server that indicates that it is not even reaching content server. It works fine in TEST environment and in PROD it is behaving in this manner. This is a new setup.
    Any pointers are appreciated.
    Thanks,
    Faisal

    The fact that bouncing EBS fixes the issue temporarily indicates that the problem is most likely on the EBS end, but we haven't encountered that specific issue. What OS are you using to host EBS? Are you purging the J2EE cache when you bounce the services?
    Feel free to reach out to Anne or myself if you'd like to dive into this. We could test with an alternate content server to see if that helps isolate the problem.
    Best,
    John Hobart

Maybe you are looking for