Third party plugins not appearing in file plugins

PS CS5 12.1 X64 on Apple 10.6.4 on MacBookPro Model 5.3 is not reading the plugin subfolders. I have tried Noiseware, Noise Ninja, Fixerbundle, and Focus Magic. None show up. These do not appear under filters either.
Paul

I typicaly run 71% of memory which is the default. Running PS in 32 bit mode limits me to roughly 1500 MB which sucks for large images. This means I have to use my plugins in 32 bit, than exit, change the Command I back to 64 bit, reopen, than do panos where I have roughly 5000 MB. Canon 1DSIII CR2 files typicaly produce 270 MB tifs.
I do panos on my PC using 12 GB in 64 Bit, so I guess I am spoiled to having lot of memory available. Oh well the Mac is only for field work, basicly storage until I return home. Ist and last Mac!

Similar Messages

  • Third Party Orders not appearing in billing due list. Item Cat billing rel 'F' & VTFA Billing Qty E

    I had a requirement to do my customer billing for third party scenario before doing the invoice verification.
    The solution that was proposed was to make the following changes,
    In VOV7 (For TAS )item category the billing relevance should be (G) and
    in the copy control VTFA  at item level  for item cat (TAS)maintain the billing qty(E).
    http://scn.sap.com/thread/3522580
    The problem I faced with the above config change was that nothing was appearing in the billing due list and when I tried to do a billing from the order directly, it would not let me.
    Then I made the following change,
    In VOV7 (For TAS )item category the billing relevance as (F) and
    in the copy control VTFA  at item level  for item cat (TAS)maintained the billing qty(E).
    Now after the MIGO is done based on the PO, the system allows me to do a customer billing from the SO before the invoice verification. But still this SO is still not appearing in the billing due list. Have any of you experts faced the same problem? How can I get this to appear in the billing due list? Or in other words, how do I identify open third party sales orders that are due for billing?
    Thanks and regards
    ES

    @ Joan, in that case invoice verification would now be necessary anymore right? In my case i need the invoice verification to happen...but at a later stage
    With the existing config...i.e. F as billing relevance and E as billing quantity, I now tried doing a MIRO immediately after the MIGO and then it appears in the billing due list. So basically I think its the billing relevance F...and if I want it to come in VFO4 before MIRO, perhaps a tweak in the logic of VFO4 to include billing relevance F + billing quantity E ?

  • Are there any good third party or otherwise apps and/or plugins for imovie'11?

    Are there any good third party or otherwise apps and/or plugins for imovie'11?

    Re: Plugins for iMovie 11
    Someone just asked this question yesterday. So I am cutting and pasting the answer From Bengt Warleby
    Hi
    You can not.
    Nor to iMovie'08 or 09 or 11 - They do not accept any Plug-ins.
    How about FinalCut Pro X - I don't know but i regard to Apple way of progress - I doubt
    For iMovie up to HD6 and FinalCut Express and FinalCut Pro up to 7.0 - there are plenty.
    Yours Bengt W

  • Third party applications not working

    So I had to get a new pearl the other day and everything is the same, but had to redownload my third party apps (like tsn, cnn, etc.). none of them work, they just say redirecting and then waiting and never go to the site,  but if I go to that applications website through the browser it works. I figure something in my settings is incorrect for the third-party apps not to work? tried a few different things but nothing seems to help.
    can anyone (please) help?

    What does it say if you go to About This Mac -> More Info -> Graphics & Displays -> Pixel Depth
    1: Try resetting the PRAM.
    2: Go to System Preferences -> Displays -> Color -> Select another profile or calibrate
    3: Go to System Preferences -> Universal Access -> Slide the Contrast bar all the way to the left
    Might end up just being a plist to snag though.

  • JUst installed OS10 maverick. Got updated epson scanner software. update refused opening saying third party could not be opened. same thing when trying to open grab tif file in photoshop. any ideas?gr

    Just installed maverick. dowmloaded updated drivers for epson scanner. could not open download. got message would not open because third party file. Also tried to open grab tif file in photoshop. also denied as third party file. Any ideas?

    dmartinnyc wrote:
    Just installed maverick. dowmloaded updated drivers for epson scanner. could not open download. got message would not open because third party file.
    If you are trying to install the updated Epson scanner driver when you get this message, it will be due to the installer not being digitally signed - which is odd if it is an updated driver. To get past this block, which is a function of Gatekeeper, hold down the Control button and click the installer. A pop-up window will appear. Select Open from the menu. You will now get the option to install the driver software.

  • Plugin not appearing for CS2

    Hello,
    I'm working on an issue with a Photoshop plugin. This is an automation plugin that works fine under CS3 on mac, CS CS2 and CS3 for pc. However on the mac under CS2 or lower it does not load, and will not appear as an option.
    Has anyone else had similar issues and know a common resolution or work around.
    Thank you.

    Brett, I spent 2.5 hours on the phone with support last week and specifically said that they all stopped working when I changed how I was using my catalogs...... I even gave up control of my computer for the technician to look at everything.  So, yeah, I gave that info many times.  As soon as I said the word "plugin", they told me they couldn't offer support of any kind.  Even when I told them they had always worked fine until I started using multiple catalogs and I felt that the new catalog usage was the issue.  Either way, I figured it out.  Just wish it hadn't cost me 2 weeks of no working plugins.

  • Audiounit/VST plugins not appearing in Premiere Pro CC

    Hi
    I recently the purchased the Slate Virtual Bus Compressor plugin bundle and was hoping to use it in Premiere Pro CC on OSX 10.8.4
    Currently the plugins will not show at all in Premiere, but do show in Audition. I would have expected that they shared the same engine when it came to scanning and registering VST and Audiounit plugins.
    All the other plugins by this company show and work with no problems in Premiere.
    Is there any way to get Premiere to refresh the plugin list so that it 'sees' the new plugins?
    I bought these plugins after I installed Premiere CC so maybe that has something to do with it?

    PrPro has more limited use of VST's, than full audio-editing programs, like Audition.
    In very general terms, there are three "types" of VST's, relating to PrPro:
    Those VST's that can load and be used by PrPro
    Those VST's that can load, but cannot be used by PrPro (in older versions, the user got a one-time warning about such VST's. Not sure if the warnings still exist. Basically, the message stated "PrPro can load this VST, but cannot use it."
    Those VST's that cannot be loaded (so cannot be used either), and will often cause PrPro to hang on launch. PrPro writes a "blacklist," at each failure, so that it does not try to load that VST again.
    It will probably take a response from an Adobe Developer, to tell us exactly what some VST's load and work fine in PrPro, but others cause issues, or just do not show up.
    Good luck,
    Hunt

  • While configuring omwb its asking for plugins. not able to find plugins

    Hi
    after registring it is asking for plugins. failed to search for SQL_SERVER2K.Jar file.
    Can you help me when can i find the file to down load. or otherwise.
    Thanks in advance
    Bhaskar
    [email protected]

    Hi,
    You must download the JDBC driver for SQL SERVER from this website:
    http://jtds.sourceforge.net/
    (Please download the distribution, and not the source - ex: jtds-1.2.2-dist.zip) - Unzip the file in a directory you can create independently from SQL Developer - You have to get a .jar file (ex: jtds-1.2.jar).
    Then , in SQL Developer, do the following:
    Click Tools, then Preferences, then Database, then Third Party JDBC Drivers.
    Click Add Entry.
    Select the jar file (ex: jtds-1.2.jar). for the JTDS driver you downloaded from http://jtds.sourceforge.net/
    Then Click on the Left high pane Connections.
    Click on the icon 'New Connection' .
    Give a Connection Name and a User/Password for the connection. This user must have sufficient privileges to perform the tasks that you want perform while connected to the database, such as creating, editing, and deleting tables, views, and other objects.
    Click on SQL SERVER tab.
    Specify the SQL SERVER hostname or TCP/IP address and the port.
    Click on the 'Retrieve database' button. If previous parameters and JTDS driver are correct, you will see your SQL SERVER database displayed in the list box.
    Select the database and then click on Connect.
    I hope it helps you
    Regards,
    Mireille

  • 3rd party order not appearing in billing due list

    Any 3rd party sales order is not appearing in VF04. all the copy control configuration is standard.
    i checked many SAP notes. we are able to update the status by using SDVBUK00 program but that cannot be run for all the days. any idea if there is any other root cause?
    when we check the status of the field VBUK-FKSAK it is blank. when we run the program SDVBUK00 it changes it to the desired value of A.
    Edited by: Nimit Kaul on Nov 8, 2010 1:44 PM

    Did you check the below OSS notes? Also check the allied notes in it.
    1)  Note 210500 - Billing status of a third-party item
    2) Note 210561 - When is a third-party item displayed in VF04?
    Per this notes, check the item relevance for billing in t.code VOV7 and set the value as B - order related in accordance with order quantity or value as F-order-related in accordance with invoice receipt quantity and check.
    Regards,

  • Should Third party order items appear in mD04

    Dear experts,
    We create third party orders where material is directly shipped to our customer from our vendors, material does not come to our inventory, why such orders appear in MD04 , not only orders the PO created for such delivery also appears, we use planning strategy 40 for the material.
    I will appreciate If any one can explain why such orders should appear in MD04 and affect planning.
    Thanks in advance.
    Anand Tripathi

    They should not be, self answered

  • Installing third party drivers not in instr.lib

    Hi, 
    (LabVIEW 2013 SP1)
    We are using LabVIEW to develop on multiple stations and we use source code control application to control the version and compatibility of the VI's.
    We are using many third party (not NI) instruments and we "install" their drivers at - 
    C:\Program Files (x86)\National Instruments\LabVIEW 2013\instr.lib
    This creates some difficulties since this folder is external with respect to the SCC application so this resource is not version controlled, whether someone downloads a different version or one add/changes another feature.
    It will be easier also to copy the development folder from one computer to the other.
    1. Is it possible to change the default behavior of LabVIEW Environment to load drivers to the Intrument Drivers palette? 
    2. What do you recommend ?
    Amitai.

    There are a few options here for you.
    1. Just put the drivers in your project folder and edit them to look at their new location instead of instr.lib.  That should be just a matter of loading them and resolving the conflicts.
    2. Use VIPM to make packages of the drivers and then everybody can install the packages.  This way they know what version is getting installed.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • Installed third party applications not showing Application folder?

    Hi,
    i've installed third party application outside from AppStore. i chosen "Anywhere" option on Gate keeper. however its not proper installation process hence how can i install? if i install third party application which is get .DMG file from some one else and installed. if i install those application its not displaying inside the Application folder on my Mac OS X 10.8.3.
    Please anyone suggest me,
    Thanks in Advance,
    Suresh Balakrishnan.

    if i double click on Xcode icon, Xcode application lauched immediatly. however Xcode is not there in the Application folder.
    Because you didn't drag and drop copy the app into the Applications folder, so your running it from the DMG instead.
    A DMG is basically a disk image volume, like any other seperate hardware volume like a USB thumb drive, a external hard drive, or another partition, except it's virtual and based all in software.
    If you don't know your way around a computer you shouldn't be using Xcode to begin with.

  • Cannot use fire shot -- asks for update - then warned it is third party and not to trust

    Cannot use fire shot to save page image. Told to update. Go to update and after several tries of re-downloading next to newest version try newest which is 'not reviewed'. Then pop-up says mozilla not sure about it and it is third party so I don't continue. I have tried so many times today to save a page and the click sound happens but the save function never appears. thank you, Janice

    Dear Kishore,
    Individual PO processing is not third party process at all. In third party process the vendor delivers the goods dirctly to the customer - please check what SAP help says.
    http://help.sap.com/saphelp_46c/helpdata/en/dd/5601d4545a11d1a7020000e829fd11/content.htm
    Dear Queyen,
    One important point of third party process is that there's no need to keep stock of materials - that is in harmony with reality. Why does your customer want to keep stock from the goods if they doesn't receive at all? Is it coreect? It doesn't correspond to the fact.
    You can do statistical (ghost) GR against the third-party PO and you can see the goods movement in MB51 - I think this should be enough.
    http://help.sap.com/saphelp_46c/helpdata/en/dd/560287545a11d1a7020000e829fd11/frameset.htm
    BR
    Csaba

  • Looking for a third party utility to replace a file's "modified Date" field

    For video files, apparently the organizer displays the thumbnails with the date taken from the file's "modified date" field. For some wierd reason (which I'm discussing with Adobe CS) the organizer changed the date of all my videos in the "modified date" field, so now the chronology of all my video clips in the organizer went down the drain.
    Is there a third party utility to replace the "modified date" field of a file with the original shot date? (which in W7 is shown in the "Date" field).
    In other words: for every video file in my library, I want to take the date from the "Date" field and put it in the "Modified Date" field
    Thanks for your help.

    OK thanks.
    I've found a utility that modifes several of the date fields.
    Now, I just want to be sure that I don't screw this up...
    Which of the several date fields of a file holds the actual shot date?
    Which of the date fields is used by the organizer to "organize" the video files (avi and mov's) chronologically?
    Thanks for your help

  • Third Party Order - Not possible to determine a consumption account

    Hi All,
    I know there are a number of threads on this subject but the answer for me doesn't seem to be here.
    The scenario I am trying to configure is around buying and selling software licenses using a Third Party Sales Order process (Item Cat TAS).
    My material is set up as a DIEN with and Account Assignment Group of BANS and a Valuation Class of 3200 (service). I'm assuming that as the license key is a notional concept rather than a physical stocked item as such - a service is the more appropriate material type but maybe I'm wrong?
    I have entered two entries using transaction OBYC (Maintain FI Configuration: Automatic Posting - Accounts) for Transaction Key GBB:
    i) General Modification = blank
    ii) General Modification = 'AUF'
    ... but this made no difference.
    Can anyone advise how to resolve this issue please?
    As an aside I am not sure how you ever know what entries are required in this table - how can you tell what General Modification values are relevant to any given scenario?

    Hi Raja - yes this was useful but I am still having difficulties.
    OK - So I can see from your notes that the Account Modifier that I was looking for was VAX associated with the Account Assigment Group of 'X' - good so I fixed the  OBYC - GBB table to ensure I has a VAX - 3200 entry for consumption and it worked - great! BUT ...
    I then wanted to get it so that my PO would create automatically so I:
    i) Set the Auto PO on the Item Category
    ii) Set the ALE paramenters asociated with the Sales Org definition
    iii) Set the Auto PO on the Vendor Master
    but that didn't work
    I wanted to set the AUTO PO on the material master but as my MM was a DIEN this option was not available to me so I created another material that was NLAG (non-stocked) and tried again - this time I marked the Auto PO on material as well but it still didn't work because I am now geti8ng the message "Not possible to determine a consumption account" - Aaaarrrggghhhhh!!!
    Everything else remains unchanged - BANS - CS etc.
    Any ideas?

Maybe you are looking for