Threshold value problem.

Hi, experts.
Now, I'm testing the preference calculateion.
After I save sales order document, the sales order I saved is replicated to the GTS server.
And, the threshold value is calculated by the system.
In my understanding, the threshold value should be come from the rule that is assigned to the relevant product.
When I excuted the preference calculation in GTS system, the threshold value is calculated correctly.
But, after the GTS system get the sales order document from the ERP system the value is different from the value of the preference calculation excuted in GTS system.
And even I changed the rule's condition(%), the threshold value of the sales document in GTS system is not changed.
But, the threshold value of GTS's preference calculation transaction is changed whenever I changes the rule.
I want to know how to solve this issue.
The threshold values shouldn't be different from each other.
Thank you for reading.
Best regards,
Jong Hwan.
Edited by: Jong-Hwan Park on May 26, 2011 5:11 AM

Dear. Marc P. Gilomen.
I totally understand what you are written above.
The threshold value shouldn't be changed until I change the rule related to the product.
However, after I changed the rule, I have expected the threshold value should be changed according to the rule.
But, it's not.
This is the point.
After I change the rule, for example 35% to 45%, the threshold value of GTS preference determination transaction '/SAPSLL/PRECA01' is changed. But, The replicated sales order's threshold value is not changed. And delivery, billing is the same with salesorder also.
It's not changed whatever I do.
So, I want to solve this problem. But until now, I didn't find the answer.
Thank you for reading.
Best regards,
Jong Hwan

Similar Messages

  • Threshold value for creating invoice?

    Hi
    Does anyone know a way to set a threshold value that has to be meet before an invoice is created in the billing transactions.
    I would like to set a threshold at about EUR 10 and as long as the customeru2019s total billable amount does not reach the threshold the open sales orders should remain open. This way we can eliminate invoices with small (or even zero) amounts that cost us more to produce than they bring in.
    Iu2019ve searched the SAP Notes and Forums but no one seems to have this issue before.
    Best regards
    Patrik

    Hi,
    What you can do is you can have a user exit at invoice saving level, so that if the invoice value is less than the desired value system will not save the invoice.
    Hope this will solve the problem unless someone comes up with something really innovative.
    Regards,
    Shantanu

  • System status requirement in Threshold value formula

    Hi Pals,
    Kindly let me know how to use system status in the threshold values creation. just i will let u know what is my requirement
    System status = Created & (Planned date is less than 14 calender days).
    The problem is, i can't able to use this system status (Created) in threshold values formula

    Hi
    Check this out !!!
    Assuming that SYSTEM_STATUS field is availbale in the threshold Change Formula display.
    SYSTEM_STATUS = 'Created' AND SCHEDULED_START < 14
    Regards
    Senthil
    Award points if useful.

  • Average of all values between (first above and last above) a threshold value.

    Currently I have a VI which I programmed a year or more ago, which grabs any value out of a data set that is above a threshold value. This is used for capturing the average of all values over a threshold when there is one peak of values that go above that threshold. However, when there are two or more peaks that go above this threshold, only the values above that value are averaged, so the end result is the average of two or more averages.
    What I need is for every value that occurs after the threshold is reached and before the threshold is dropped below for the last time. Picturing a set of data whose graph looks like the letter "M," for example with the threshold being halfway up the M, I want to show the average of (the first hump, plus the dip below the humps, plus the last hump) but what I'm getting now is the average of (the first hump, plus the last hump). What I get now cuts out the data between the two peaks.
    Any assistance would of course be appreciated.
    Solved!
    Go to Solution.
    Attachments:
    AveAboveThresholdAll.vi ‏15 KB

    Actually I think that Tims solution has a little difference to the stated problem that both limits should be above a threshold value. Since the second array is inverted the rounding should be not towards +Infinity but towards -Infinity in order to really only go up to the last element that is above the threshold. The code as made by Tim takes one sample more, which could or couldn't have any significance.
    Nevermind, I take that back.
    Rolf Kalbermatter
    CIT Engineering Netherlands
    a division of Test & Measurement Solutions

  • CCMS threshold Value baseline calculation

    Hi Guys,
    I am looking CCMS threshold value baseline calculation for ECC, BW, XI, SRM, CRM, APO & Solman systems. Many portals are provided the description of each MTE class , but not provided baseline calculation.
    Please let us know some expertise advice
    Thanks.
    Manjunath

    Dear. Marc P. Gilomen.
    I totally understand what you are written above.
    The threshold value shouldn't be changed until I change the rule related to the product.
    However, after I changed the rule, I have expected the threshold value should be changed according to the rule.
    But, it's not.
    This is the point.
    After I change the rule, for example 35% to 45%, the threshold value of GTS preference determination transaction '/SAPSLL/PRECA01' is changed. But, The replicated sales order's threshold value is not changed. And delivery, billing is the same with salesorder also.
    It's not changed whatever I do.
    So, I want to solve this problem. But until now, I didn't find the answer.
    Thank you for reading.
    Best regards,
    Jong Hwan

  • DSWP threshold values all change

    Hi,
    I have a SolMan EHP1 system being used as a CEN . Now i would like to setup Email alert monitoring and to test it i change the threshold values on the filesystem and see if it triggers an email. Now problem is when i change the threshold value of a filesystem lets say sapreorg
    G->Y
    Y->R
    R->Y
    Y->G
    it seems that the top value populates the entire column with identical values for all the filesystem when i actually want them to have individual values. and these values do not get transferred to RZ20 on the CEN for that system. I would have expected the values set in DSWP system monitoring to be reflected in rz20 under filesystem and it seems the values do not change.
    is there a bug in this or is it s standard feature? I have trawled the marketplace for oss notes and found nothing. Checked forum but i cannot find exactly what i am trying to look for
    your help is much appreciated
    Thanks,
    Mani

    Hi Nibu,
    Yes all the threshold values have been set through this method and its quite easy to setup. in the CEN's rz20 i could see entries to the dev and test servers for "Filesystems" node so i could assign it 'z' auto reaction methods to send emails with specific messages. in RZ21 it seems i can only assign auto reaction methods with a generic message for, for example "Filesystems" but i cannot dig down further into Filesystems and select a specific alert like sapreorg or saparch or /usr/<SID> for a specific system has reached threshold levels so we could quickly respond to it rather than trawl through the alerts to see which is giving the issue.
    Anyone know how i can assign email auto reaction methods to specific alerts  in the CEN without setting this up locally in the monitored system?
    Mani

  • %SFF8472-5-THRESHOLD_VIOLATION: Te1/1: Tx power low alarm; Operating value: -40.0 dBm, Threshold value: -12.2 dBm

    Hi,
    I am facing a strange problem in one of my Cisco Catalyst 4900M switch. We have a ten gig WAN link which went down (error-disabled) couple of weeks back with logs suggesting Low TX power.
    Tried followingtroubleshooting approach, but it did not resolve the problem.
    SFP replaced
    Tried connecting the link on a different port.
    Fibers tested and found to be OK
    Performed loop test and was able to see the loop on both end of the P2P link.
    Replaced the Cables between PTT demarcation till switch patch panel.
    Switch Logs:
    IOS Version: bootflash:cat4500e-entservices-mz.150-2.SG1.bin
    Model: Cisco Catalyst 4900M
    *Jun 19 12:32:36.582: %PM-4-ERR_DISABLE: link-flap error detected on Te1/1, putting Te1/1 in err-disable state
    *Jun 19 12:34:04.154: %SFF8472-5-THRESHOLD_VIOLATION: Te1/1: Tx power low alarm; Operating value: -40.0 dBm, Threshold value: -12.2 dBm.
    *Jun 19 12:44:04.254: %SFF8472-5-THRESHOLD_VIOLATION: Te1/1: Tx power low alarm; Operating value: -40.0 dBm, Threshold value: -12.2 dBm.
    *Jun 19 12:54:04.354: %SFF8472-5-THRESHOLD_VIOLATION: Te1/1: Tx power low alarm; Operating value: -40.0 dBm, Threshold value: -12.2 dBm.
    *Jun 19 13:04:04.454: %SFF8472-5-THRESHOLD_VIOLATION: Te1/1: Tx power low alarm; Operating value: -40.0 dBm, Threshold value: -12.2 dBm.
    *Jun 19 13:14:04.558: %SFF8472-5-THRESHOLD_VIOLATION: Te1/1: Tx power low alarm; Operating value: -40.0 dBm, Threshold value: -12.2 dBm.
    *Jun 19 13:24:04.658: %SFF8472-5-THRESHOLD_VIOLATION: Te1/1: Tx power low alarm; Operating value: -40.0 dBm, Threshold value: -12.2 dBm.
    *Jun 19 13:34:04.761: %SFF8472-5-THRESHOLD_VIOLATION: Te1/1: Tx power low alarm; Operating value: -40.0 dBm, Threshold value: -12.2 dBm.
    *Jun 19 13:44:04.861: %SFF8472-5-THRESHOLD_VIOLATION: Te1/1: Tx power low alarm; Operating value: -40.0 dBm, Threshold value: -12.2 dBm.
    *Jun 19 13:54:04.961: %SFF8472-5-THRESHOLD_VIOLATION: Te1/1: Tx power low alarm; Operating value: -40.0 dBm, Threshold value: -12.2 dBm.
    *Jun 19 14:04:05.061: %SFF8472-5-THRESHOLD_VIOLATION: Te1/1: Tx power low alarm; Operating value: -40.0 dBm, Threshold value: -12.2 dBm.
    *Jun 19 14:14:05.161: %SFF8472-5-THRESHOLD_VIOLATION: Te1/1: Tx power low alarm; Operating value: -40.0 dBm, Threshold value: -12.2 dBm.
    *Jun 19 14:24:05.261: %SFF8472-5-THRESHOLD_VIOLATION: Te1/1: Tx power low alarm; Operating value: -40.0 dBm, Threshold value: -12.2 dBm.
    *Jun 19 14:34:05.361: %SFF8472-5-THRESHOLD_VIOLATION: Te1/1: Tx power low alarm; Operating value: -40.0 dBm, Threshold value: -12.2 dBm.
    *Jun 19 14:44:05.461: %SFF8472-5-THRESHOLD_VIOLATION: Te1/1: Tx power low alarm; Operating value: -40.0 dBm, Threshold value: -12.2 dBm.
    *Jun 19 14:54:05.561: %SFF8472-5-THRESHOLD_VIOLATION: Te1/1: Tx power low alarm; Operating value: -40.0 dBm, Threshold value: -12.2 dBm.
    *Jun 19 15:04:05.661: %SFF8472-5-THRESHOLD_VIOLATION: Te1/1: Tx power low alarm; Operating value: -40.0 dBm, Threshold value: -12.2 dBm.
    Switch1#
    Switch1#
    Switch1#
    Switch1#sh int te1/1
    TenGigabitEthernet1/1 is down, line protocol is down (err-disabled)
      Hardware is Ten Gigabit Ethernet Port, address is 2c54.2de6.5100 (bia 2c54.2de6.5100)
      Description: ***P2P ***
      MTU 1500 bytes, BW 10000000 Kbit, DLY 10 usec,
         reliability 255/255, txload 1/255, rxload 1/255
      Encapsulation ARPA, loopback not set
      Keepalive set (10 sec)
      Full-duplex, 10Gb/s, link type is auto, media type is 10GBase-LR
      input flow-control is off, output flow-control is off
      ARP type: ARPA, ARP Timeout 04:00:00
      Last input 02:39:04, output never, output hang never
      Last clearing of "show interface" counters 2w0d
      Input queue: 0/2000/0/0 (size/max/drops/flushes); Total output drops: 0
      Queueing strategy: fifo
      Output queue: 0/40 (size/max)
      5 minute input rate 0 bits/sec, 0 packets/sec
      5 minute output rate 0 bits/sec, 0 packets/sec
         2367 packets input, 199072 bytes, 0 no buffer
         Received 2367 broadcasts (2367 multicasts)
         1 runts, 0 giants, 0 throttles
         5 input errors, 4 CRC, 0 frame, 0 overrun, 0 ignored
         0 input packets with dribble condition detected
         5951 packets output, 453948 bytes, 0 underruns
         0 output errors, 0 collisions, 13 interface resets
         0 babbles, 0 late collision, 0 deferred
         0 lost carrier, 0 no carrier
         0 output buffer failures, 0 output buffers swapped out
    Switch1#
    Switch1#sh int te1/1 transceiver detail
    ITU Channel not available (Wavelength not available),
    Transceiver is internally calibrated.
    mA: milliamperes, dBm: decibels (milliwatts), NA or N/A: not applicable.
    ++ : high alarm, +  : high warning, -  : low warning, -- : low alarm.
    A2D readouts (if they differ), are reported in parentheses.
    The threshold values are calibrated.
                                  High Alarm  High Warn  Low Warn   Low Alarm
              Temperature         Threshold   Threshold  Threshold  Threshold
    Port       (Celsius)          (Celsius)   (Celsius)  (Celsius)  (Celsius)
    Te1/1       30.7                74.0        70.0         0.0       -4.0
                                  High Alarm  High Warn  Low Warn   Low Alarm
               Voltage            Threshold   Threshold  Threshold  Threshold
    Port       (Volts)            (Volts)     (Volts)    (Volts)    (Volts)
    Te1/1      0.00                   N/A         N/A         N/A        N/A
               Optical            High Alarm  High Warn  Low Warn   Low Alarm
               Transmit Power     Threshold   Threshold  Threshold  Threshold
    Port       (dBm)              (dBm)       (dBm)      (dBm)      (dBm)
    Te1/1      -40.0                 4.4         0.4        -8.2      -12.2
               Optical            High Alarm  High Warn  Low Warn   Low Alarm
               Receive Power      Threshold   Threshold  Threshold  Threshold
    Port       (dBm)              (dBm)       (dBm)      (dBm)      (dBm)
    Te1/1      -12.3                 4.4         0.4       -14.4      -18.4

    I did replace the SFP with a new one.
    Interface Te1/2 is up and working.
    SESK_P2P10G-4900MSOD-SW1#sh int te1/2 transceiver de
    ITU Channel not available (Wavelength not available),
    Transceiver is internally calibrated.
    mA: milliamperes, dBm: decibels (milliwatts), NA or N/A: not applicable.
    ++ : high alarm, +  : high warning, -  : low warning, -- : low alarm.
    A2D readouts (if they differ), are reported in parentheses.
    The threshold values are calibrated.
                                  High Alarm  High Warn  Low Warn   Low Alarm
              Temperature         Threshold   Threshold  Threshold  Threshold
    Port       (Celsius)          (Celsius)   (Celsius)  (Celsius)  (Celsius)
    Te1/2       34.6                74.0        70.0         0.0       -4.0
                                  High Alarm  High Warn  Low Warn   Low Alarm
               Voltage            Threshold   Threshold  Threshold  Threshold
    Port       (Volts)            (Volts)     (Volts)    (Volts)    (Volts)
    Te1/2      3.22                   N/A         N/A         N/A        N/A
               Optical            High Alarm  High Warn  Low Warn   Low Alarm
               Transmit Power     Threshold   Threshold  Threshold  Threshold
    Port       (dBm)              (dBm)       (dBm)      (dBm)      (dBm)
    Te1/2       -1.5                 4.4         0.4        -8.2      -12.2
               Optical            High Alarm  High Warn  Low Warn   Low Alarm
               Receive Power      Threshold   Threshold  Threshold  Threshold
    Port       (dBm)              (dBm)       (dBm)      (dBm)      (dBm)
    Te1/2       -3.6                 4.4         0.4       -14.4      -18.4

  • How to set threshold value for single tablespace in grid control 11g

    Hi,
    I want to set the threshold value for a single tablespace in grid control 11g,
    please provide me a navigation path.

    Sandy wrote:
    Can you please provide me the full navigation path?go to Targets --> Databases
    Select the Database you like to set this alert for
    Select link Metrics and Policy Settings

  • Rounding off value problem in sales order

    Hi All,
    This is related to a rounding off value problem in sales order.
    The problem is described by an example which is as follows -
    Selling Price of Material A = Rs. 176.76
    Excise charged = Rs. 21.80
    Total Price = Rs.176.76 + Rs.21.80 = Rs. 198.56
    On this total Trade Discount (ZDTD) having access sequence,is calculated  at the rate of 4% = Rs. 7.94
    But the condition base value after the discount is showing Rs.198.60 instead of Rs.198.56
    I want the system to reflect the value as Rs.198.56 intact and it should not round up to the nearest value i.e. Rs. 198.60
    Why is this happening? Is it possible to reflect the exact value? If yes what is needed to be done?
    The commercial round off is activated for the DIFF Condition Type.
    Looking forward to some valuable suggestions.
    Thanks & Regards
    Priyanka Mitra

    Hi Ramesh,
    Thanks for your suggestion but the problem has been solved by me.
    Regards
    Priyanka Mitra

  • Managing threshold value of document library

    Hi,
    We are managing below stuff through .net application
    1)Uploading the document  to current Month folder in a document library , While uploading a document check for the current month folder , if it does not exists create a new folder with month and year format.
    2) After uploading a document, storing the file URL in SQL table i.e. through stored procedure.
    3) While retrieving we are using the DB link to display the pdf in application.
    Now have migrated this to SharePoint 2010
    We are using share point 2010 document library, with multiple folders. The library has now exceeded 5,000 items.
    As a result it is not allowing the users to update the documents to a document library, now we are receiving a list view threshold error.
    So now my question is if I increase the threshold value, will it be proper solution?
    After increasing the threshold value, will the performance be affected?
    Please share your ideas/thoughts on the same.
    Regards,
    Sudheer
    Thanks & Regards, Sudheer

    Hi,
    Instead of increasing the threshold limit,finally i felt folder structure would be good enough i.e
    1) Generally for the bulk documents if pretty good enough i.e.
    Uploading the documents in the folder week wise of the document library.
    So in case if there are 1000 documents in the folder, count would be 1 only.
    So this is a good practice for the large number of documents to upload in document library.
    2) Coming to file path,
    After uploading the document, file path can be saved under column of type hyperlink in the list.
    Same folder structure can be followed to save file path in the list
    3) We can fetch the file path from the list to display the pdf.
    Please correct me if i am wrong.
    Regards,
    Naga Sudheer M
    Thanks & Regards, Sudheer

  • Configuration of FP-Modules. In the catalog is something written about sending data on data change. There is a checkbox in the FP-Explorer but I can�t find a configuration menu in FP-Explorer to set the threshold value at which the data will be send.

    Configuration of FP-Modules. In the catalog is something written about sending data on data change. There is a checkbox in the FP-Explorer but I can�t find a configuration menu in FP-Explorer to set the threshold value at which the data will be send.

    : Configuration of FP-Modules. In the catalog is something written about sending data on data change. There is a checkbox in the FP-Explorer but I can�t find a configuration menu in FP-Explorer to set the threshold value at which the data will be send.The FP-1600 modules automatically send data on-change only. The change threshold is by default 0%. Any change, even a single least significant bit change, is sent back to the computer. If the FP-1600 firmware revision supports deadbanding (firmware revision 3.0.x and later, can be downloaded from ftp://ftp.ni.com/support/fieldpoint/Update/FPEthernet0320.zip ). Then on each analog channel or count channel you can specify a percentage change for deadbanding in FieldPoint Explorer. This is done on a channel by channel basis, by right-clicking on the particular IO module and choosing Edit this Device, then choosing Channel Configuration. Each channel (if it supports deadbanding) will have a deadband entry box on the middle right side of the screen).
    The FP-1000/1001 seri
    al network modules do not support deadbanding. The checkbox in FieldPoint Explorer is simply for how FieldPoint Explorer displays the data to the user and does not effect client programs nor the behavior of the network module itself.
    Regards,
    Aaron

  • Adding threshold values in an existing query

    Hi All,
    I have to update an existing query.
    The original query gives me the value of Debtors to sales ratio for each division (DTR value).
    Now, I want that for each division, there be a threshold value which should be compared with the debtor's value and if found higher than the threshold, the result should be in red.
    The result being in red can be done at the front end, which in my case is Cognos.
    But to store different threshold values for diffrerent divisions and then compare them with the debtor's values of the query, do I need to have a separate cube wherein I should store the divisions and their threshold values?
    Or how can I go about it?
    Thanks and best regards,
    Sharmishtha

    Hi Nagesh,
    I do not have those values in the system but will be getting as external data only.
    Divisions and debtors are separate info objects.
    I have 12 debtors KFs (for 12 months) which get filled by an APD (data source is a query).
    So, my final query has divisions in the rows and 12 debtors in the colm.
    So, now i'll be given some threshold debtor value for each division which I need to bring in the query as a KF which can be compared in the query output.
    So, what you suggested will it work in this requirement?
    Also, can you elaborate on the method I need to follow?
    Thanks a lot,
    Sharmishtha

  • Consideration of factory calender in threshold values

    Hi,
    I need to consider the factory calender in the threshold values to check the due date of a task or a checklist item.
    For example:
    The task/or checklist item is due in 11 days (and the factory calender should be condsidered)
    Does anybody know how to implement these checks in the threshold values of cprojects?
    Thanks for your help!
    Isabella

    Dear Friend,
    Ideally you should not change anything on Production server directly.
    The normal & universally acceptable way is to transport the changes from Development or Quality to Production.
    Still if you want to make changes on Production Server Directly (which even i dont recomend) you need to make Production Server in change mode thru T-Codes SCC4 & SE03 & make necessary changes.
    Let me know if you need to know how to use T-Codes SCC4 & SE03.
    Thanks,
    Jignesh Mehta

  • Threshold value for price changes

    hello,
    We are trying to change the price for material and getting error Threshold value for price changes was exceeded
    msg no is CKPRCH 032
    Being Sd guy I'm not able to understand where we need to check and what changes to be done
    Please guide
    Regards
    Vishal Jajoo

    Dear friend
    For that u check the following path
    spro>> material management>> logistics invoice verification>>invoice block>>> stochastic block
    please check here for your plant your activated, if you activated then this error will appear
    regards
    Pramod

  • Solman Setup system Monitoring alert threshold value for Filesystem issue

    Hi,
    Our solman system is SAP EHP 1 for SAP Solution Manager 7.0 sp level 0024.
    We have setup the alerts System Monitoring alerts from DSWP in solman system for our target production system .
    But while assigning individual threshold values of filesystem freespace in MB for windows operating system disks C:,D:..all the values are getting changed after saving  to same value.(i.e if I update C:\ disk value and click on save rest of disks are also getting updated to this value).
    The same works fine for filessytems if target system OS is unix.
    I have tried the examples suggested in note:522453 but it nothing changed.Please suggest.

    Hi Sonal
    when you want to save the thresholds for only the one MTE you set
    you need to click on
    EDIT
    -> PROPERTIES
       -> USE FOR INDIVIDUAL MTE
    Kind Regards
    Marius

Maybe you are looking for

  • No movie playback with video adaptor

    OK, here's a poser... Setting up my Macbook as a temporary AppleTV. Front Row is working perfectly, streaming shared content from my desktop. So long as I am viewing on the Macbook's screen, everything is as it should be. Here's the problem. I connec

  • Unable to deploy a WAR file in Linux

    Hi Every one I am trying to deploy the war file from a remote machine.If server is running in windows environment it deploying properlly. If i tried to deploy the war file Server is running in Linux machine i am getting foilloeing error while deployi

  • Upgrade cS5 to 6 how do I?

    I have the old Adobe Creative Suite 5 Design Premium Student edition how do I upgrade to 6 and whats the cost?

  • Changing currency in PO ?

    Can I change currency in PO after saving once ?

  • ITunes adding artist to song title

    Library of about 10,000 songs tagged satisfactorily. For some reason, iTunes likes to add the artist before the song title. For instance in iTunes: B.B. King - The Thrill is Gone | B.B. King | Capitol Gold Blues Legends and when I add library to my i