Thumbnails/Mouse Over's next to Description in report

Hi
can we have thumbnails and mouse overs for every report next to its description in portals?
Your help in this regard will be appreciated
Thanks
Sriman

Ben,
This is actually much easier that you are trying to make it.
Go to your List and edit it. Open any given list entry. Take the existing text in the List Entry Label section and put it inside the span tag. The List Entry Label is the actual text the users see in the list.
List Entry Label:
My list entry to Page XXnow becomes
<span title="My customized description of this list entry">My list entry to Page XX</span>Now when you mouse-over the text in the list entry, you will see the description in the title section appear. This works for ordered lists, tabbed page navigation lists, bulleted lists and more.

Similar Messages

Display comments on mouse over

Hi Gurus,
I need to display comments on mouse over on the cell in web report.
In a web report, when a user right click on a cell and click 'Goto' and 'create comment' and enters and saves a comment then I can view the comment using a 'List of documents' web item.
But I need to see the comments directly when the 2nd user mouse over on the same cell.
can any one please help me out to do this. we are in 3.5 environment.
Thanks
Prasad

Hi,
Check out this link mentioned below:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/1035ca90-0201-0010-13b7-9a35063d6a18
In this, when u goto page 20, there ia one SAP BW URL, which will help even to add a tooltip in WAD 3.5.
I havent tried it, but you can give a try.
Hope this helps you.!
-Pradnya

Display of IPTC description during mouse-over in filmstrip

Windows XP SP3, LR3
When you move your mouse over an image in the film strip, you get a temporary popup showing the IPTC title and description fields from the image.
Unless I have missed something, this behavior can not be changed.
This can be a problem when the description field is VERY long. It can cover up a significant portion of the screen and can be very annoying.
I have a number of pictures where I have a VERY long narative about that particular picture. It is annoying as I move over these images in the filmstrip and see huge popups momentarly appear.
There should be some way to either disable this feature, or at least limit the amount of description field that is shown.
Gary

Thank you! I should have thought of that myself. Now that I think about it, I knew that what was displayed there was controlled by what you have set in View options.
Gary

Premiere pro hangs on waving a mouse over a clip thumbnail

This problem has been going on for months. I cannot keep taking enforced 5 minute breaks.
Premiere hangs when waving a mouse over a thumbnail in a bin. The entire machine becomes unresponsive for up to five minutes. Hover Scrub is not switched on. The hang is codec independent. Happens on DPX files, Cineform, Pro Res and any other codec encoded clips.
Win 7, Premiere CC 2014 8.2.0 (65) Caravan. Dual Xeon machine, fast raid 48GB RAM, 4 GTX Titans. This machine is not short of horsepower and it runs Resolve flawlessly.
I have already uninstalled/reinstalled, deleted preferences and cache and all the other things that are suggested in the FAQ. I have also set Premiere to only use 1 of my GTX Titans (out of 4).
Wave a mouse over a clip thumbnail and the machine becomes very unresponsive. The mouse movements become jerky. Premiere windows all go white, then come back again. Task Manager shows over 90% System Idle, CPU usage as low as 3%. It's as if Premiere is waiting for something. Eventually I get control of the machine back and can continue unless I want to select another clip from a bin. Then I have another five minute wait, even if I click the same clip that I clicked on before. This is not increasing productivity.
I know there are thousands of people suffering from similar issues to this, either on PC or Mac. I don't even get a reply on Premiere's support 'chat' (case number 0186356023)
Adobe, what is going on?

Hi Kevin,
Thanks so much for your reply! I've reset the preferences in the past and did so again after your suggestion, but no luck. I even went into the AppData folder to remove the preferences sub-folder altogether. It still hangs and acts as "Not responding" for several minutes before startup.
I wonder if there's any connection between this issue and a second issue I'm having with CC not being able to play ProRes files. http://forums.adobe.com/message/5845690#5845690
In any case, I uninstalled every Adobe Product on my machine, ran the Adobe cleaner successfully, then re-installed Premiere Pro CC. Unfortunately, nothing seems to have changed.

No mouse over descriptions pse7

Installed pse7 after uninsalling pse3. Is there a setting so when I place the cursor over the symbols on the left side, it gives adescription of what it is? i.e. when I place the mouse over spot healing the word "spot healing" be made to appear.
Also, when I'm using ereaser, in pse3, when I outlined what I wanted in to do, it would complete the ereasing after releasing the mouse button. Now, in pse7, it leaves a gray splotch of whatever size outline I made. Is there some sort of preference or setting I need to change?
thanks.
Markie

For your gray splotch, is gray in your background color square? If so, the problem is that you are erasing on a background layer. Background layers can't be transparent, so instead you get the background color. Double click the layer in the layers palette to turn it to a regular layer and erasing should give you transparency (if you use the background or magic erasers, they do this automatically. The regular eraser doesn't.)

Behaving erratically when mousing over the text

Hi all,
I have a very strange problem. I am trying to do a simple photo-gallery using edge animate without using the timeline as much as possible.
Let's say I have a thumbnail, and I want to mouse over the thumbnail and it goes semitransparent and a text pops up.
Now, what I had done is I have gone to the compositionready and set the codes to sym.$("caption1_txt").hide(); to hide the text. Next, I have gone to the mouseOver and set the codes to
sym.$("thumb1").animate(
"opacity":"0.2"
}, 500
to set the opacity to 20% for the thumbnail. And then I set the text caption to show like so :
sym.$("caption1_txt").show();
Conversely, I have gone to mouseOut and do the reverse as shown :
sym.$("thumb1").animate(
"opacity":"1"
}, 500
sym.$("caption1_txt").hide();
The strange thing happens when I mouseover the text, it seems to flicker repetitively. May I know how to solve this? It seems the program is trying to execute an event for the text block but there is none. Is there a way to nullify or 'ignore' the mouseover effect for the text?
Thanks, greatly appreciate!

Thanks for the prompt response again!
Yes, I realised I have to go to the symbols and then set that to %. Didn't know that can be done
Thanks heaps! It is working!
Another question, which I have posted in another post, I do have problems working with the jQuery animate() function. I have tred to implement CSS3 filters using the animate() function in jQuery but it does not seem to be working. I know presently only Chrome supports this sets of filter. An example of what I had done for the mouseOver handler :
sym.$("thumb1").animate(
"-webkit-filter":"sepia(100%)"
}, 250
Is there anything that is missing?
Thanks and greatly appreciate!

How do you create the 'cream pop-up info text boxes' that appear when you hover mouse over?

Hi people,
I really need to know how you create the 'cream pop-up info text boxes' that appear when you hover your mouse over an object on a webpage (and often in any program e.g. Photoshop) for more than a second. I need to know because the logo on my website is the navigation tool used to return to the homepage. It is always found in the top left so the user can always click it to return.
The only problem is im the only one who knows that when you click my logo, you return to the homepage. I need one of these 'cream info boxes' (forgive my lack of knowledge) to appear so the user will figure it out.
Thanks for taking the time to read my question...

Using your code it should look like this where title attribute is in red:
<div id="apDiv2"><a href="index.html"><img src="divs_dw/jtgd_logo_trans.png" alt="jtgd_logo" title="your description goes here" width="176" height="163" /></a></div>
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb

One more nugget: Chart zoom with the "Mouse Over" effect

Hello all.
Just read my signature first, it might explain a lot. I do not intend to compete with Darren and I don't think this "nugget" (at least it supposed to be one) will amaze any of the LV veterans and this forum is rich of them. But maybe it will bring some new ideas to some of you or maybe it will be useful for some LV beginners (like me). It is very likely, my code will have some lapses, but please be gentle pointing that out to me. If you feel a need, you can always optimize the code and develope it further. Just don't forget to share!
So back to the point.
I am developing a project using LV. In my program there is a waveform chart which has to show 4 plots. Depending on the length of the X Scale, it sometimes gets hard to see the plots clearly because of their density.So I decided that I need a tool, which would zoom the chart in. And this is what I have came up with after a few "Google" searches to check which part of the bike is already invented and also a bit of programming by myself.
Maybe you guys (at least the veterans) know the BetterVIEW Consulting LV example where they have implemented the Mouse Over effect. So a part of their example has been used in this tool and part of the credit must go to them. I thank them a lot
This tool uses a cluster and its property of visibility to show/hide the cluster depending on if the current position of the mouse cursor is in the desired range or not. The program also gets the image of the chart and returns the subset of the image. The subset is taken for the area arounf the mouse cursor. So if you move the mouse, the zoomed in area will also chage in response. After that, the subset of the image is zoomed in for better view.
The user might chage the zoom factor during the execution. Also it is possible to turn the zoom option On or Off if you don't wish to see it for the moment.
This is how the front panel looks like:
And this is the image of the block diagram (see the attached files for the vi, the VI Snippet tool distorts the code too much, so I haven't added it):
I haven't found anything the same in the forum. Yet I'm a newbie here and I don't have that much experience surfing it. If it wouldn't be something new (in the forum, not necessarily to some of you personally), just ignore the thread. I hope this was worth your time and your attention.
Good coding
Message Edited by Giedrius.S on 02-11-2010 12:46 PM
While evaluating my code please have in mind that I am a LV novice. Therefore sometimes my code might violate some coding rules that I have to learn about myself. But how else could I do that...
Chart zoom with "Mouse Over" effect
Attachments:
Zoom.vi ‏198 KB
Mouse_pos.vi ‏20 KB
Check_pos.vi ‏18 KB

Very nice Giedrius.
It takes guts to "step up to the chalk board" so I will do what i can to give you some ideas to think about. This is similar to the type of feedback I offer durring our in-house code reviews.
1) The floating property nodes outside the loop are not sequenced by wires so they could execute after the loop starts. Sometimes this could cause weird errors. Seq with the error cluster.
2) Property nodes can be re-sized so you can apply more than one property setting in the same call. Property node have to execute in the UI thread (which is single threaded) so using a single nodes will force a single context switch rather than one for each.
3) Setting the same property repeatedly in a loop just burns CPU. THe Scale min for both X an Y can be moved outside the loop ?
4) THe Wait Until Next ms" function does not get used in any of my code. It is not a way to get a fixed wait but rather a random wait. If you code completes 1 ms after the next multiple, the delay is double less 1 ms. If you have multiple loops using them and it f the delay for each are not unique prime numbers, then the "Wait until next ms multiple" is a good (cough cough) way of getting them all to wake up at the same time and fight for the CPU.
5)An Event Struture to monitor mouse enter/leave and mouse move (this would have to be a sepearte loop) is easier on the CPU than polling.
6) Is that math in the case to handle the Chart position on the FP? If so then using the property nodes for the chart to find its postion will let you code adapt to GUI changes.
7) Right to left wires are not well recieved.
8) A Bundle by Name is prefered over a "Bundle" since it is self documenting. I know the Picture function so I can see that is the rectangle you are specifying but reader not famliar with that function would not be able to "READ" the code without poking at it.
9) THe event structure would also help with setting the Zoom factor. Only poke it when you have to.
That is all that comes to mind at the moment.
Again thank you!
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Mouse Over Graphs and Legend

Could this feature be included in next release?
Allow to select separate mouse over values from the legend. If I have long definitions for the bars in a graph - I do not want to display these same bars in the legend (there isn't room) I would rather display numbers in the legend which refer to the bars and then have the longer text shown only when I mouse over the bars.
Right now the legend shows the same text as the Mouse Over Values. If I turn off the legend and only have the Mouse over Bars, then I can't use the Enable Hide/Show Chart Series at run-time feature - so I need to have both - the legend and the mouse over values.
Thank you

Hi Marya,
You can submit an Enhancement Request on the below URL:
https://ideas.sap.com/index.jspa
Thanks,
Amit

The "text in a yellow box" that appears when I hover the mouse over a selection or help tag.

The "help tag" (Or in most cases the unwanted tag) often is in the way of what I want to look at.
This is especially true when you are looking at an item that has it's own pop up giving you a description or information.
When you hold the mouse over say.... a movie icon in XFinity, the icon of the movie expands and gives a brief synopsis, date and actors of said movie.
Unfortunately, I cannot read the synopsis for the "Help Tag" blocks all the content forcing you to try different ways of pointing to the movie icon so you can read parts of the discretion from every angle of approach then piece it altogether in your mind.
I DO NOT want "help tag". It is extremely annoying and time consuming ergo it des not "help" it hinders.
Can it not be disabled (Like balloon help in OS 9) so you do not have to feel anger and frustration every time you see that yellow tag?

Ooo, I did not notice the article was from 2007. Thansk for pointing that out. I don't think I am going to try it. It seems that with all the "little" apps the seem to keep growing in numbers, someone will come up with a solid program that would wok through system prefs. I would pay the normal $20.00 for an app like that.

Link not showing hand icon when mouse over

I am creating an image gallery and have thumbnails that open
in a separate window to a larger version of the image.
The links are working, but when you put the mouse over the
image the little hand does not appear to show it is a link, if you
click it works and the image opens, but the hand does not show,
what have I done wrong.

This implies that you have applied the behavior directly to
the <img> tag,
when you should have applied it to an anchor tag surrounding
the <img> tag,
e.g.,
this - <a href="javascript:;"
onclick="whatever"><img src="whatever"...></a>
rather than this - <img onclick="whatever"
src="whatever"...>
You can get this by manually creating it, or by selecting the
image,
removing the behavior, then entering "javascript:;" (without
the quotes) in
the Link field of the Property inspector. This will wrap the
<img> tag with
the anchor. Now select the <a> on the Tag selector, and
apply your
behavior.
As you can see, familiarity with HTML (and CSS) will come in
quite handy
when working with DW.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"PosterP" <[email protected]> wrote in
message
news:g49sdk$gtp$[email protected]..
>I am creating an image gallery and have thumbnails that
open in a separate
> window to a larger version of the image.
>
> The links are working, but when you put the mouse over
the image the
> little
> hand does not appear to show it is a link, if you click
it works and the
> image
> opens, but the hand does not show, what have I done
wrong.
>

Mouse over images not resizing correctly in Safari

I have a series of thumbnail images of different sizes that, by using MouseOver, cause a larger image to appear. Safari only seems to resize "larger" and doesn't resize "smaller" resulting in distorted images. This site works fine in every other browser I can lay my hands on. I have managed to get a similar site to work fine but I don't really see the difference between the two. Any ideas on what I need to do? Site that doesn't work www.IllustriousPlay.com/test/Portfolio.html Site that does work www.IllustriousPlay.com/Page1.html Run your mouse over the various images. (Be warned I'm tinkering with the site, so it may have other things wrong with it.)

Kowhai,
Welcome to Apple Discussions.
I see the distortions.
I am not involved in Web Site design, but will W3C Markup Validation Service help answer your question?
I see Failed validation, 16 errors when I enter your URL.
BTW, I like your colorful illustrations.
;~)

Line chart and Bar char Mouse Over

Hi All,
I have to plot Bar chart with Material is on X-axis and Cost is on Y-axis, I am able to do that.
But when mouse put over the bar in the chart it should be showing the Material Description .
Could you please any one help me.
Material   Material Desc    Cost($)
10000      xxxxxxxxx       10,000
10001     xxxxxyyyyy      10,000
Thanks
Muvva

Hi,
I think, there is no direct solution.
There is a workaround.
1. Disable mouse over Test.
2. Enable drildown on mouse over and use that index to identify column which user selected.
3. Display Material Description and Value using label components.
But the issue is ,we have to identify a placeholder in graph to display these values.
Regards
Baby

Meta text not showing on mouse over

Certain sites (such as [http://xkcd.com/789/]) use meta text to add more information, etc. when you run the mouse over the picture. This feature isn't working for me.

Do those image have a title attribute?
Firefox only displays a tooltip with the ''title'' attribute and not with the ''alt'' attribute that is meant to show descriptive text in case the image can't be displayed.
Popup ALT Attribute: https://addons.mozilla.org/firefox/addon/1933
Tooltip Plus: https://addons.mozilla.org/firefox/addon/11481

How to respond to mouse over link inside textarea component?

I want to respond to the content of a link inside htmlText
propery of textarea, when the user move the mouse over the link,
without clicking on it. is there a simple way to do so with flex?

I found a solution to this.
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=60&catid=582&threadid =1325639&enterthread=y
What you do is use
itemRollOver and the event.itemRenderer.data.name together.
I used it so when I roll over an item in the dataGrid it
changes the text area I have in my application with the description
of the current rolled over item. When I mouse over another entry
then the description changes to that description and on and on.
Here is the full code I used.
itemRollOver="NAME_OF_TEXT_AREA.text =
event.itemRenderer.data.description"
you would change the description to whatever the field is you
want, such as name, author, temp, books or whatever the data is.
I am actually bringing in data on videos from a database. XML
is created from the database using the XML plugin from Dreamweaver
Developer ToolBox. A PHP file is used to output the desired table
information then it is brought into Flex 2 application and the data
is propigated into the Data Grid I have setup. The Text Area is
updated with the description of the video both when one is selected
but also, now, when any of the items in the list are moused over,
or rolled over.
It works great. You can easily change this to work for your
app or at least give you a direction to go if it isn't exactly what
you need.
I have been trying to get this to work for a couple days now,
just found my solution and wanted to come post to let others know
about it.

Thumbnails/Mouse Over's next to Description in report

Similar Messages

Maybe you are looking for