Time based animation

Hello,
I'm looking for opinions on which is the best way to animate your game for andoid and/or iOS with time based code.
I have some knowledge of the subject, but have not tested the various methods on my mobile device.
Some options i know of would be using an ENTER_FRAME event ,calculate delta-time, and used either a fixed or variable time step. (Or perhaps variable but with a limmit) Others have mentioned doing the same, but with a Timer calling the function rather than ENTER_FRAME.
Also i have read of setInterval() as an option. Some reccomend to updateAfterEvent(), some dont.
I think i may remember it was reccomended not to use timers with flash mobile??? I might be wrong about that.
thanks for any input.

What's wrong with a tweening engine like TweenLite / TweenMax... it's what I use.

Similar Messages

Time based animation effects

I'm adding effects to images on a slide. Entrance effects. Yet the one image disappears after the 3 seconds. The text box goes back to its initial size before the zoom. How do I get them to stay at the position they are at at the end of the time-based animation effect? Thanks in advance!
Joy

Check the timing of the effect in the Effects panel. Most likely you don't have the effect timing set correctly there so that it remains in effect for the duration that the image is on screen.
Perhaps you can post a screenshot of your main timeline showing the image in question, and the same image's Effects timeline?

Tick vs. time -based animation

Hi. I'm a bit of a newbie and I was wondering if I could get some information/opinions on animation techniques. I've seen a few mentions (one very recently by Abuse) of tick-based animation being inferior to time-based animation. I'm pretty sure I get the two concepts -- I assume it's just a matter of defining when the environment is automatically updated.
On the one hand (tick-based) keep a tick count and after x ticks go by, move your elements.
On the other hand (time-based), update the environment, repaint (I assume this would have to be via active rendering) and then figure out how long to sleep until update/render next time, i.e. (SLEEP - timeThisCycleTook).
My first question is: Am I correct? :-) If not, please enlighten me on the two approaches.
My next question is: why is time-based so much better? It seems to me it would allow the frame rate to be more stable, though would the frames be drawn at more predictable intervals with tick-based?
Any information that would un-confuse me would be greatly appreciated! :)
-Eric

hehe, I love spawning contraversial topics :D
Your understanding of tick based V's time based appears to be correct - as for the advantages between the 2 - thats abit of a contraversial area.
Both techniques are useful, depending on the circumstances...
tick based
advantages:-
*easier collision detection
*more predictable simulation
disadvantages :-
* if used on a computer that is too slow to keep up with the tick rate,
your game will run at <100% speed. This may affect user input (if using polling),
and will also cause problems with game difficulty/balancing
(things are easier to control when they happen slower than they should)
* in multiplayer, the gamespeed will be limited by the slowest client
(which is ok for RTS type games, but very bad for FPS type games)
* on fast computers, your game will not be taking full advantage of the speed
time based
advantages :-
* networking synchronization is alot easier (and a constant speed can be maintained, even with slow clients)
* the speed of the computer is fully exploited
disadvantages :-
* collision detection is alot trickier
those are not the definitive adv/dis by any means -
just what I could come up with off the top of my head.
feel free to add/correct to them...
abu,

Set frame delay time for animated gif using ImageIO

I'm trying to change the delay time of each frame for an animated gif by changing the metadata for each frame as following but it doesn't change anything.
static private IIOMetadata setMetadata(IIOMetadata metadata, int delayMS) throws IOException
          Node root = metadata.getAsTree("javax_imageio_gif_image_1.0");
          for (Node c = root.getFirstChild(); c != null; c = c.getNextSibling())
               String name = c.getNodeName();
               if (c instanceof IIOMetadataNode)
                    IIOMetadataNode metaNode = (IIOMetadataNode) c;
                    if ("GraphicControlExtension".equals(name))
                         metaNode.setAttribute("delayTime", Integer.toString(delayMS));
     }Does anyone know how to set delay time for animated gif using ImageIO ?

I'm trying to change the delay time of each frame for an animated gif by changing the metadata for each frame as following but it doesn't change anything.
static private IIOMetadata setMetadata(IIOMetadata metadata, int delayMS) throws IOException
          Node root = metadata.getAsTree("javax_imageio_gif_image_1.0");
          for (Node c = root.getFirstChild(); c != null; c = c.getNextSibling())
               String name = c.getNodeName();
               if (c instanceof IIOMetadataNode)
                    IIOMetadataNode metaNode = (IIOMetadataNode) c;
                    if ("GraphicControlExtension".equals(name))
                         metaNode.setAttribute("delayTime", Integer.toString(delayMS));
     }Does anyone know how to set delay time for animated gif using ImageIO ?

Sales orders in TDMS company/time based reduction are outside the scope

Guys,
I have had some issues with TDMS wheras it didn't handle company codes without plants very well. That was fixed by SAP. But I have another problem now. If I do a company code and time based reduction, It doesn't seem to affect my sales orders in VBAK/VBUK as I would have expected. I was hoping it would only copy sales orders across that have a plant which is assigned to a company code that was specified in the company code based reduction scenario. That doesn't seem to be the case.
VBAK is now about one third of the size of the original table (number of records). But I see no logic behind the reduction. I can clearly see plenty of sales documents that have a time stamp way back from what I specified in my copy procedure and I can see others that have plant entries that should have been excluded from the copy as they do belong to different company codes than the ones I specified.
I was under the impression that TDMS would sort out the correct sales orders for me but somehow that doesn't seem to be happening. I have to investigate further as to what exactly it did bring across but just by looking at what's in the target system I can see plenty of "wrong" entries in there either with a date outside the scope or with a plant outside the scope.
I can also see that at least the first 10'000 entries in VBAK in the target system have a valid from and to date of 00.00.0000 which could explain why the time based reduction didn't work?
Did you have similar experiences with your copies? Do I have to do a more detailed reduction such as specifying tables/fields and values?
Thanks for any suggestions
Stefan
Edited by: Stefan Sinzig on Oct 3, 2011 4:57 AM

The reduction itself is not based on the date when the order was created but the logic enhances it to invoices and offers, basically the complete update process.
If you see data that definitely shouldn't be there I'd open an OSS call and let the support check what's wrong.
Markus

Calculation of SLA times based on Service Organization

Is it possible to calculate the SLA times based only on Service org?
a) Using Service contracts i.e create SC with only org and assign the Service & Response profiles.
Else as mentioned below.
Please give your more thoughts.
I maintain the Service & response profiles at "Maintain Availability and Response Times" .
Can I access these values directly in the BADI ?
My scenario is
a) An agent belongs to a service org.
b) I define these Profiles seperately for each Org (Org1 Org2 etc) at the above tcode.This manual entry.I know we dont have org to profiles mapping in the above tcode.I just painly maintain.
c) In the BADI i check the org entered in the complaint.
d) for Ex if the Org1 is entered I want to access the profiles for Org1.If else ladder.
e) then use these profiles to calculate the SLA times.
f) then save the document.
g) Also trigger an e-mail saying the above time lines.
Is the above flow possible??
Let me know if you want me to post this onto another thread.
Thanks
amol

Shalini,
I will be just maintaining the service and response profiles in the "Maintain Availa..." tcode.
There wont be exact mapping stored in any table.
My logic would be ,i dunno whether this right or wrong..
1) Once i get the Org ,I would compare like ths
if( orgdata = org1)
then service profile 1 etc.
2) then apply the profiles to the cal of SLA times.
I think we can achieve what you said using CRM_ORDERADM_I_BADI
Or we need to use the BADI's specifically mentioned for serv contract det and calculation of SLA.
As you know in SAP for SLA times we need to have the service contract for a) customer b) org and many other parameters.then to this SC we need to associate the service and response profiles.When the SC is determined in a complaint ,the serv and resp profiles will be used to get the SLA times.
But my requirement is to have determine the SLA times based on the service organisations.Not based on the customer and any other parameters.
For ex : If my serv org is in India the times would be diff ..if my serv org is in US the times would be diff.
So let me know what approach would be best ?
Use BADI's as above or does this approach of having define different Service contracts (without having Partner functions customer etc) for diff orgs?
Thanks
Amol

Problem in Time Based Publishing Content

Hi every1,
Im working with Time based publishing.
Using xml form builder i created 3 contents means 3 xmls.
Then i created one iView for reading the contents (KM Navigation iView) and i setup the properties like
layout set, layout set mode, root folder of contents.
After creation of iView i checked in the preview all 3 contents visible in my iView.
Now i want to show time based content in that iView.
Contents displayed as per time based
for that i enabled time based publishing and life time of particular content(xml)by using the given way
Time dependant publishing in Km. I clicked on the right hand side of the name of my folder-> go to details -> Settings -> Lifetime. there you have to enable the time dependant publishing. Then i opened the folder and click on the rt hand side of the document-> properties -> lifetime, here give the time span of the document.
After life time setup , again i seen in the iView for reading the contents (previous created) in the preview
again all 3 contents displayed including life time expired content also.
Please give me solution for this, or any more configurations required.
Note :
I required to display the contents in between time applicable only ( from time and until time).
Thanks in advaince
Vasu

I have waited more than 3 hours for settings to apply.
But i couldn't find any changes.
any other solution?
Thanks
Vasu

Time Based Workflow - how to make it work?

Hello,
Has anyone successfully built a Time Based Workflow? Could you share your examples?
For me it does not work properly.
I have tried to set up 2 workflows: on Opportunity Close Date and Account Contract Expiration Date.
- Account Contract Expiration Date: I want an Account Owner to get an email notification exactly 6 months before the contract with his client expires. However - the email is triggered each time the record is modified - so I have seen in the workflow monitor that users on the date of contract expiration - 180 days will receive as many emails as many times they modified the record! Is there a way to avoid this situation?
- Opportunity Close Date - I want to send an email to Opportunity Owner's Manager - 10 days after the opportunity was closed. However - there will be the same issue as above + the wait action is not working with a PRE function.
Please let me know what you think and if you have already built a Time Based Workflow that works correctly.
Edited by: MagdaR on May 18, 2010 1:57 AM

Let's start with the workflow for Opty Close Date.
There are a lot of ways to do this, so you'll need to evaluate which way is best for your case, but the basics are to check to ensure that the opty is closed for the first time, then set the flag. In order to accomodate for the opty being closed when it is created, you will have to consider a post default for the flag in addition to the workflow.
In this case, you could create a workflow on Opty using the before modified record saved trigger event. In the Rule Condition, have the workflow check for a closed opty and if the status changed to closed during this modification. There are a number of options to validate this, including sales stage = Closed/Won or Lost, Closed Date is populated for the first time, Status is closed. In any case, just validate that the opty was closed for the first time using the PRE Function (i.e., PRE(Closed Date) is null and PRE(Closed Date)<>Closed Date). When your condition is met, set a flag that will trigger the event. You could also add a date that the wf conditions were met the first time, to ensure that you track when the rule was originally triggered.
The next step is to have a workflow that unsets the flag if the conditions are not met. Set the order on this one to follow the rule above.
The last rule is the wait/email rule and it uses the when modified record saved event. This rule triggers on the flag being checked, then waits to send the email.
Test this and validate that it will work for your purposes. Based on this workflow, you should be able to create the other one, and I can help if you have any issues.
Good Luck,
Thom

Define Time-Based Fields for Cost Centers

Dear All!
I would like to know , how I'm abale to cahnge the setting
of business area for Time-Based Field of Cost Centers to period
Transaction is OKEG
Would be thankful

You can maintain master data for cost centers, cost elements, activity
types, and business processes with time dependencies. You can make
changes at any time for any given time interval. Data storage also takes
place with a time reference. In this way, a master data record can have
multiple database records storing different information.
The smallest interval is one day. To ensure data consistency, you
cannotchange each field daily. The timeframes in which you can change a
field depend on the field functions, which are fixed by the SAP R/3
System and cannot be changed. Master data maintenance includes an
automatic check for each field's time-based consistency, resulting in
individual time-based maintenance for each field.
Regards
Prabhu

Exclude a table from time-based reduction

Hi,
Iu2019d like to exclude a table from time-based reduction. How can I do this ? Is there any manual how to do customizing in TDMS ?
Regards
p121848

Thank you Markus for your annotation.
AUFK is technically declared as an Master Data Table, but stores orders. Standard
TDMS provides a reduction of this file and in the client copies we did via TDMS a lot of records disappeared when we selected time-reduction.
Now we fond out that some Transactions as OKB9 or KA03 refer to old internal orders. So we would like to maintain the customizing, to exclude AUFK from reduction. But this is not possible in activity TD02P_TABLEINFO, because no changes can be done to the tables, which have got the transfer_status 1 = Reduce.
You can manipulate the Transfer-Status in file CNVTDMS_02_STEMP before getting to activity TD02P_TABLEINFO, but I wonder whether this is the way one should do.
Any idea ?
Regards p121848

Error in computing time based on TimeZones on a server

I have a piece of code that generates timestamps based on US TimeZones such as Pacific, Central and Eastern. I get correct results when I run this code locally (EST) but get results an hour off when I run the same code on a server running in US central time. See the results below and the code that I run.
Results from running the code on Dev Server:
ts: 2007-11-05 10:39:03.19 �� (Default time)
tsEST: 2007-11-05 10:39:03.019� �� (EST based on TimeZone String America/New_York, should be 11:39)
tsCST: 2007-11-05 09:39:03.019� �� (Central time based on TimeZone String US/Central, should be 10:39)
tsPST: 2007-11-05 07:39:03.019� �� (Pacific time based on TimeZone String America/Los_Angeles, should be 8:39)
Results from running the same code on Local machine:
tsEST: 2007-11-05 11:39:01.272� (Eastern Time based on TimeZone String America/New_York)
tsCST: 2007-11-05 10:39:01.272� (Central time based on TimeZone String US/Central)
tsPST: 2007-11-05 08:39:01.272� (Pacific time based on TimeZone String America/Los_Angeles)
Below is the code that I ran.
Timestamp ts = new Timestamp(Calendar.getInstance().getTime().getTime());
DateFormat df1 = new SimpleDateFormat( "yyyy-MM-dd HH:mm:ss.SS" );
GregorianCalendar cal1 = new GregorianCalendar();
Timestamp tsNow = new Timestamp(cal1.getTimeInMillis());
TimeZone tsEST = TimeZone.getTimeZone("America/New_York");
String inPattern = "yyyy-MM-dd HH:mm:ss.SS";
DateFormat df = new SimpleDateFormat(inPattern);
df.setTimeZone(tsEST);
Date date = df.parse(tsNow.toString());
df.setTimeZone(tsEST);
ts = new Timestamp( df1.parse( df.format(date) ).getTime() );
System.out.println("tsEST: " + ts.toString());
DateFormat df2 = new SimpleDateFormat(inPattern);
TimeZone tsCST = TimeZone.getTimeZone("US/Central");
df2.setTimeZone(tsCST);
ts = new Timestamp( df1.parse( df2.format(date) ).getTime() );
System.out.println("tsCST: " + ts.toString());
TimeZone tsPST = TimeZone.getTimeZone("America/Los_Angeles");
df.setTimeZone(tsPST);
ts = new Timestamp( df1.parse( df.format(date) ).getTime() );
System.out.println("tsPST: " + ts.toString());

Actually, I did try a complete removal and re-install with the same results. On the desktop machine on which the Ctime client is working, Ctime was installed on an earlier system version and was working before the upgrade to the current system. The client continued to work. This at least indicates an initial setup problem on 10.2.4 and may indeed relate to the product not yet being ready for the latest system.

Repository Services - Time based publishing missing

Hi,
We are running NW07, and want to configure time based publishing.
I can't find the Repository Services for this it is suppose to be under
System administratoin -> Content Management -> Repository Services
But it is not,
can anyone help?

After that, you have to define the real lifetime
http://help.sap.com/saphelp_nw70/helpdata/en/e8/a9a76828b8dc469969ff450ec81ced/frameset.htm
An keep in mind that only users with not more than read permissions will see the document only during its lifetime. Users with write additional permissions can always see it
Kind regards
Karin

Time-based publishing stopped working

Hi,
We currently have a problem with time-based publishing in KM. Since a few days ago, documents stopped becoming visible once they reach their "valid from" date. We have not been able to publish documents with TBP since then on that system.
These errors keep appearing in the knowledgemanagement.#.log files, which seem related to this issue :
#1.5#C000AC10005900130000012D00000B3400040F325EE040B8#1142608921379#com.sapportals.wcm.WcmException#irj#com.sapportals.wcm.WcmException.WcmException(62)#System#0#####ThreadPool.Worker1##0#0#Error##Plain###application property service not found com.sapportals.wcm.repository.service.timebasedpublish.wcm.TimebasedPublishException: application property service not found
     at com.sapportals.wcm.repository.service.timebasedpublish.wcm.TimebasedPublishServiceManager.getApplicationPropertyService(TimebasedPublishServiceManager.java:589)
     at com.sapportals.wcm.repository.service.timebasedpublish.wcm.TimebasedPublishServiceManager.setValidEventSent(TimebasedPublishServiceManager.java:540)
     at com.sapportals.wcm.repository.service.timebasedpublish.wcm.TimebasedPublishServiceManager.handleVisibleResources(TimebasedPublishServiceManager.java:327)
     at com.sapportals.wcm.repository.service.timebasedpublish.wcm.CheckValidFromSchedulerTask.run(CheckValidFromSchedulerTask.java:65)
     at com.sapportals.wcm.service.scheduler.SchedulerEntry.run(SchedulerEntry.java:128)
     at com.sapportals.wcm.service.scheduler.crt.PoolWorker.run(PoolWorker.java:107)
     at java.lang.Thread.run(Thread.java:479)
The KMC version is SP2 with Patch level 29 hotfix 1, and is running on Windows Server 2003 with an Oracle database. We have opened an OSS message but while we are waiting I thought I would post this here in case anyone ever experienced this.
Best regards,
Olivier

Hi,
1. Have you checked that tbl service continue assigned to your repository ?
2. If you create a new repository and assign these service, does it work ?
Enables users to define a time frame during which documents are published (visible).
Note that the time-dependent publishing service requires the application property service.
This service cannot be configured.
Patricio.

Time Based publishing on taxonomy

Hi there,
we have built a news application where everyone can post it's own news items. Location of the user is a personal folder created by using a userhome filter. The folder has time based publishing activated, the lifetime can be entered in the edit form or directly on the news item through 'details'.
To display all items for all users, a taxonomy is used. However, the lifetime is ignored and all items are visible to all users.
I have activated the tbp service on the /taxonomies repository, as well as enabled 'lifetime' on my 'news' subfolder (everyone has read permissions on this one). Unfortunately, still all items are visible to all users.
Is TBP possible on a taxonomy?
Thanks,
Kevin

Hi Kevin,
we have kind of the same scenario here.
We have a KM Folder where editors are editing news. This folder has a taxonomy to display different views on this news folder. TBP is activated in the folder.
It works like that:
Endusers only see valid news in the taxonomy folders. BUT editors are seeing even the expired ones, nevertheless that they only have Read permissions in the Taxonomy and /taxdata repository. So it seems to us that the "Full control" permission from the Source KM Folder is kind of overwriting the Read only permission in the Taxonomy. (Maybe you have the same problem)
Our solution might be that we are programming a "KM Resource List Filter" to filter out the unwanted expired news out of the taxonomy folder for the editors as well.
Cheers
Christoph

Time Based workflow not working

Hi,
I am facing issue in time based workflow. I designed a worflow with two actions. Wait action is the first action and second action is send email. For send email the from address is current user and TO is owner of the record. One thing I noticed is that its working fine when "I" triggered the workflow and assign owner as "me". Its not trigerring the mail when owner is somebody else. I can see the instance with the following error message in the workflow monitor. "The buscomp Service Request is no longer valid for workflow name ********. The workflow instance ******* has terminated."
Edited by: user11100286 on Oct 1, 2010 4:33 PM

Hi,
I am facing issue in time based workflow. I designed a worflow with two actions. Wait action is the first action and second action is send email. For send email the from address is current user and TO is owner of the record. One thing I noticed is that its working fine when "I" triggered the workflow and assign owner as "me". Its not trigerring the mail when owner is somebody else. I can see the instance with the following error message in the workflow monitor. "The buscomp Service Request is no longer valid for workflow name ********. The workflow instance ******* has terminated."
Edited by: user11100286 on Oct 1, 2010 4:33 PM

Time based animation

Similar Messages

Maybe you are looking for