Timecodes don't match from same clip?!

I'm trying to relink audio to a clip that I added to the timeline but deleted the audio track. But when I double click on the clip on the timeline copy the timecode and then load the original clip from the bin and paste the timecode. The times don't match. The two clips which are the same clip one just on the timeline with the audio unlinked, have different starting timecodes. I've attached a pic to show what I mean.

Without any 3rd party tools (except Word) you have three other options -
1. fastest - temporarily set up your track to match the timecode of your STL file.
You can do this by exporting a reference movie of your sequence with a modified starting time code. Bring in this asset to DVDSP and drop it in your track, import the STL, and then replace the reference movie with your encoded asset. The subtitles will stay put and should stay lined up.
This method can also be effective for compensating for smaller offsets casued by differences between the encode and tape master caused by trimming, encoding, etc. You can temporarily adjust the start trim of your asset if subtitles are coming up early, or add a still image to the beginning of the track if the subtitles are coming up late. Once the subtitles are imported to the track, they will stay in the same positions when assets are moved around or replaced.
2. re-encode your video with the correct starting time code - make sure whether the TC is supposed to DF or NDF. The advantage here is that if the subs need to be re-imported for any reason, you won't have to go through the flip-flopping of assets in option 1.
3. more complex, but still fast - change the timecodes in your file using find and replace. This will really only allow you to change the hour place in the timecodes, but may be all you need. Open the file in Word, and you should see comma-delimited data in a 3-column format:
[start time] , [end time} , "subtitle text"
00:00:00;00 , 00:00:00;05 , this subtitle is 5 seconds long
So, in Word, you can search for ^p00: and replace it with ^p01: (^p is the code for a paragraph break). This will change all the satrting times hour values from 00 to 01. Then do the end times by seraching for , 00: (space-comma-space-zero-zero-colon) and change to , 01:.

Similar Messages

Select dates that match from same table.

I wish to update a selection of records
where the order_date is the same, and the customer_id is the same.
The update simply need to be to change the order date on both to the lowest date of the two(or how ever many there are for that date).
e.g.
Ship_date / Order_date / customer_id
1-02-01 2-01-01 1
1-02-01 12-01-01 1
12-01-01 1-01-01 2
12-01-01 5-01-01 2
## So above the first 2 records would have the order_date set to the lowest date of the two records.
A self join ?
Not really sure about this, Thanks in advance!

You could try this (not tested):
UPDATE yourTable t1
SET t1.Order_Date = (SELECT min(t2.Order_date)
                           FROM yourTable t2
                           WHERE t2.ship_date = t1.ship_date
                           AND t2.customer_id = t1.customer_id)However this also updates columns that already have the minimum value. Maybe you would like to avoid it, then add some where clause to the Update statement.
Changed because order_date and ship_date needed to be switched.
Message was edited by:
Sven Weller

HT204406 Hello, I have songs that show they are "Waiting" for download from the cloud but they are greyed out. Some songs in one album are done others in the same album will not download. It is not a time function because i have been working on this for

Hello, I have songs that show they are "Waiting" for download from the cloud but they are greyed out. Some songs in one album are done others in the same album will not download. It is not a time function because i have been working on this for weeks. I have allowed my compter to run for days and the songs are still not accessible. I have a Match subscription and Match is working. If I click on the "Genre" link the greyed out songs show that they are ready for download from the cloud but I cannot download them. I have downloaded over 1500 other songs, so I am trying to understand what is going on here. I would appreciate any help anyone can give me.
Thanks

I did think about that and if I have to I will do that, however there are about 50 songs. I have closed and reopened iTunes several times and I am sure that I have the latest version. It fails right away but I can click on the cloud download icon and download the song that it failed on ... therefore it is not that song "or any one song" causing the issue. Any ideas?

Printing from InDesign and Photoshop - colors don't match

I'm printing the same CMYK image from Photoshop and from InDesign, to a HP desktop color printer. I'm using CS3, all the color settings are identical in both programs, but the printed colors don't match. Any suggestions would be greatly appreciated.
(cross-posted in InDesign forum)

I have had the same problem: an image printed from PS differs from the same image printed from ID. However, I can't very well print as bitmap from ID since the image is part of a spread, including text. I have tried various combinations of settings. I made the PS image to 100% of the ID final size (in the layout). I tried various print dialogue settings (high transparency flattener, medium transparency flattener, color managed, not color managed, CMYK output and leave unchanged ... every combination I could think of). ID does something on printer output. My understanding (at least from CS2) was that ID output to printer uses a PDF format of some sort. I had the idea maybe the ID output did some sort of resampling or re-rendering of the image, but have not prooved that out. I did get some slight improvement in the ID output when the image in the ID layout was put in at 100% (whereas it had been 88% (the original image being bigger than the ID layout size). What I am getting now in CS3 is a clean looking photo in PS, but in ID, skin tones look somewhat blotchy and a bit more saturated. The PS image is better than ID, and while ID is not bad, why is it not as clean as PS? I can definitely see the difference between PS and ID output and know it will show on press, too. Any suggestions?

Problems importing the same clips from diferents cards IMAC and CS5

Hi, I'm having trouble importing my clips recorded in The ex1, I'm using CS5 with an imac, The problem is that when I import the same clips recorded in two cards, the second card comes exactly with what is inside the first card. It does not have what was originally in it, it just copies what was on the first card or vice versa. But the original folder in my drive is intact with the two cards intact. The problem is when I import it to CS5 on IMAC. When i import the video the imac makes a long file with all the clips an puts them together except the clips from the previous card, it shows but with the same video that is in the begining of the second card or the last clip recorded in the second card .I tried to import the clip again from the first card and it comes with the same video from the second card again.

1) Don't know why this is happening. It may have something to do with
I downloaded from iCloud the same library I was working with
I'm not clear what procedure you're using here. Using a cloud for storage might change some file tags. Generally users I think keep the library on the same drive as the media, keeping the library backups on the system. There is no real benefit in keeping the media in a separate location. Often users will keep the library in the same folder as the media. It makes backing up using tools like Carbon Copy Cloner very efficient.
1a) This can be difficult to find as there sometimes is no obvious indicator. It might be a missing element in a compound clip, a missing or altered layer in a graphics file, a missing font, a missing effect. These will show up inside the item involved, but may not be apparent in the browser. A missing transition for instance will not be seen until you skim over the project or try to export it.
2) The 43 MB is a small amount of optimized media. This never prevents relinking. The library is always looking for original media, or proxy media if you're in proxy playback. It never looks for optimized media. If it has it, it uses it, if it doesn't, it uses the original media. If you are using original/optimized playback, you must have the original files. The optimized files are not enough.

PP CS6 same settings as sequence created from source clip ...

If there is documentation on this one, let me know, I didn't see anything at a glance. I am trying to educate myself on PP CS6 and encoding when one selects same settings as sequence on export where the sequence was created from a clip. (And also just trying to understand the basics of encoding, codecs, formats, containers, etc. generally speaking.) Keep in mind I am coming from a consumer level of understanding and prior used another editor that had "smart rendering" whereby if you selected an output matching a clip it matched everything and encode only what changed. My source video in this case is from a Countour+ helmet camera unit: 1280x720, 59.94, progressive, .mov, "avc1" codec and H.264 reported by Gspot. Let me know if you need more information.
Ok so when I do an export as noted above I see PP selecting "MPEG Preview" for the format and "MPEG I-Frame" for the codec, both options grayed out. If I run gspot I get the same width, height, frame rate, etc. as the original source clips only gspot reports the format is mpeg-2. I was expecting to see the mpeg-4/h.264 like the source video. Is this result to be expected?
Secondarily, if your goal was to have a file that can play on your Sony PS3 (and a PC), what settings would you choose for export if you wanted to have the highest quality result?

Jim - you were spot-on. Here's the response from Dropcam, in case anyone else had the same issue:
You are actually correct in that the frame rate for Dropcam's video does vary depending on a few factors. The fps slows down for night vision to average out image noise and increase the image quality. The fps will also slow down when there is no motion going on in a scene to conserve bandwidth.
Thanks, Sean

How can I copy an audio effect from a clip and paste it to another clip in the same timiline...With FCPro 7 it was all so fast........

how can I copy an audio effect from a clip and paste it to another clip in the same timiline...With FCPro 7 it was all so fast........

Tom Wolsky wrote:
The advantage goes to FCP7 if you allow that it can copy and paste filters, audio and video, transformations, and other attributes separately.
You can do that in FCPX too, as all the things you cited are listed separately in the inspector.
Here's a little gotcha. Let's say you've color corrected a few clips and you've applied an effect to one and want to paste it the other clips. You switch off color correction and copy the clip. You select the other clips and paste effects. What do you think happens? The effect is applied, but the color correction is applied as well, only it's switched off as it was in the first clip, so all the color correction on the other clips is lost. Fun, eh?
I'll try to replicate your gotcha - but no, that doesn't sound like fun at all!

I updated my phone and my husbands to the 5.0 OS now everytime I enter a new contact he get's it. We don't want the same ones. How do I stop it from syncing our phones?

I updated my phone and my husbands to the 5.0 OS now everytime I enter a new contact he get's it. We don't want the same ones. How do I stop it from syncing our phones?

You linked them both to the same Apple ID and thence to the same iCloud account. Don't do that.

HT1766 I did 2 back ups on one date. how can I restore from first back up from same date? I don't see in my list of back ups as 2nd back up overtook first back up.

I was syncing my iphone with itune and there was a update which system started downloading then something happened and i had to restart my computer. when i restarted my computer, itune started backing up my iphone eventhought there was nothing left on it. now this second back up overtook my first back up
and in that process i can not back up to my first back up (as its from same date i guess) I have lost all my contacts. I did not have any icloud back up or my contacts are not being backed up locally on my computer either. if anyone knows how to find back up other than listed on back up lists, please help. Thanks

Can I add my existing, licensed apps to my list of 'Purchases' on the Mac App Store so I don't have to buy them twice?
No. Only apps purchased from the App Store can be re downloaded for free including updates.

How do I separate audio channels to edit them seperatly ... they are both in the same clip when I record from two diffrent mics on two diffrent channels

I have premier
elements 12
How do I separate audio channels to edit them seperatly ... they are both in the same clip when I record from two diffrent mics on two diffrent channels

timc
I do not see a way to separate audio channels to edit them separately in Premiere Elements (any version).
Premiere Elements does have audio effects including Balance, Fill Right/Fill Left, and Swap channels, but that is not what you are seeking.
I would refer you to an audio editor such as the free Audacity for what you want to do.
Splitting and Joining Stereo Tracks - Audacity Manual
I am not sure if this is close to what you seek
https://forums.creativecow.net/thread/3/883383
But, the opportunity seems to be in Premiere Pro, not Premiere Elements
Please review and consider and then let me your thinking on the matter relating to your Premiere Elements 12 (what operating system).
Thanks.
ATR

HT1918 I have been using the same credit card for about a year and now it's telling me my security code don't match so it won't let me buy anything.... Any ideas

I have been using the same credit card for about a year and now it's telling me my security code don't match so it won't let me buy anything.... Any ideas

Is the address on your iTunes account exactly the same (format and spacing etc) as on your credit card bill : http://support.apple.com/kb/TS1646 ? If it is then you could try what it says at the bottom of that page :
If the issue persists, contact your credit card company and verify that they and any company they use to process credit card authorisations have the correct information on file.
And/or try contacting iTunes support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

Help!! working on a movie on Imovie. I had to delete a music file from a clip section and now there are some clips that have no audio!!! don't know how to get the audio back to my clips!!!! Help!!!

Help!! working on a movie on Imovie. I had to delete a music file from a clip section and now there are some clips that have no audio!!! don't know how to get the audio back to my clips!!!! Help!!!

You can use some third party software to copy the music from your old iPod back to computer first, and then import the music into iTunes and re-sync them to yournew iPod. Here is a guide about how to transfer iPod music to computer. Hope it helps. Feel free to email me if you need further help.

How do you down load a previous purchase from iTunes. The help instructions don't match what is on the iTunes My Purchased list.

How can previous purchases be downloaded. The help instructions don't match what is on the page of the previous purchases.

What you can redownload will depend upon what country that you are in - music, films and TV programmes can't be redownloaded in all countries, audiobooks and ringtones are one-time only downloads. What you can redownload will show under the Purchased link under Quicklinks on the right-hand side of the iTunes store home page on your computer's iTunes (if content providers/rights-holder have removed items from the store then they also won't show for redownloading)

From and/or subject don't match msg body

Hello all. Two weeks ago I posted this problem under a different head, but got no replies, so let me try again as it is messing up maybe 5% of my email.
Every morning I collect email--from 40 to 70 messages, many forwarded from Gmail--and message filtering usually works efficiently to transfer from Inbox to folders. But somewhere along the line, 1 to 3 emails get muddled together: the from and/or subject don't match the text, and sometimes the displayed text includes the Msg Source, including text, from some other, unrelated email.
I've been using FF and TB for more than 10 years now, and believe this kind of email muddling dates only to the last couple months. I use the latest Thunderbird under Windows 7 on a Dell desktop. I have 4 hopefully innocent addons. Of course I can send screenshots and forward the message source for analysis.
Hoping this time to attract attention to the problem! Thanks!

This is an indication of file corruption. Lack of maintenance on your email folders is the usual cause of this.
You can try to repair the file tables and see if that helps. Be prepared to lose messages if the corruption is too bad.
Right click the problem folder. Select Properties and then Repair Folder.
Then read this article about best practices to help prevent this in the future.
http://kb.mozillazine.org/Keep_it_working_-_Thunderbird

TS3406 Twice call from same number if not done anything, the screen is locked

Iso 7.0.4 - Twice call from same number (within 3 minutes) if not done anything immediately after the first call, the screen is locked (the added photo of screen). Now no way to access the phone of home screen or something else.
iso 7.0.4 - Twice call from same number (within 3 minutes) if not done anything immediately after the first missed call, the screen is locked after second missed call bizzarly. Now no way to access the home screen or something else on the screen by any touch (Back seen on the screen also does not get touched) except force power off and on. Please find the solution for me.
and shot) m same number if not done anything, the screen is locked.

Ok, well I had the network support guy down, when I mentioned an "OD Server" he went into Directory Access and put some details in that seem to have fixed the problem! So thanks for that...
Unfortunately, it looks like some of the other machines in the room might need binding, but at least the network team is aware of it.
Whereabouts would I look for ARD crash logs on the affected iMac? I tried locking/unlocking the screen again after the other issue was fixed and had the same problem. Its almost instant - as soon as you hit "lock" the status immediately switches to "ARD Not Active".

Timecodes don't match from same clip?!

Similar Messages

Maybe you are looking for