TimeMachine unable to change disk

Hi,
I'm trying to change my disk for Time Machine, but when I click on the Change Disk button, nothing happen.
What is going on here?

Thanks, that was exactly it.
But I do not see how it came to be, as it was working fine before...

Similar Messages

Unable to change default write disk of Lenovo K3 Note

I'm unable to change default write disk of Lenovo K3 Note to sd card. At first i was able to change later on the option shows only as phone storage as fixed. I tried to factory reset many times at first it works later the same issue persists. I tried the format the sd card, tried a new sd card, still no use. Please Help ...

Hello
How R U All ?
hope you all are fine
The problem that i put an 32GB SD in the mobile
and i went to the stourge options and make the default writeing is in the SD
and i move some apps to the sd
but sometimes the apps that in the sd did not open
even the photos and videos in the sd the mobile did not recognise it at all
its seems like the mobile didnt recognise the SD at all
and to solve this problem i forced to restart the device
have anyone have the same problem?
Admin note; threads merged, subjects edited

Unable to change text size

So I have been unable to change my text size in itunes. When i switch between "large" and "small" text sizes the size remains the same, however the size of the menus and the itunes stores is small. I theorize it was probably some program I installed but since I am nearly constantly adding and removing programs I can't pinpoint which one it was. If anyone can tell me how to fix it or point me in the right direction that would be great. I am including my system info as well as a screen of itune. Thanks.
System
Manufacturer Gateway
Model NX860XL
Total amount of system memory 2.00 GB RAM
System type 32-bit operating system
Number of processor cores 2
64-bit capable Yes
Storage
Total size of hard disk(s) 75 GB
Disk partition (C:) 16 GB Free (65 GB Total)
Disk partition (D:) 4 GB Free (10 GB Total)
Media drive (E:) CD/DVD
Graphics
Display adapter type NVIDIA GeForce Go 7900 GS
Total available graphics memory 527 MB
Dedicated graphics memory 256 MB
Dedicated system memory 0 MB
Shared system memory 271 MB
Display adapter driver version 7.15.10.9816
Primary monitor resolution 1920x1200
DirectX version DirectX 9.0 or better
<ahref="http://s152.photobucket.com/albums/s178/Snelk/?action=view&current=Scree n001.jpg" target="_blank">

"Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

HT3275 I continue to get the following error message: Unable to complete back up.an error occurred while creating backup folder. It's a brand new drive. When I attempt to repair it using disk utility I get:unable to repair disk cannot unmounted

I have been trying to use time machine on a new lacie 2tb usb 2 drive for back up. I continue to get: "unable to complete backup.An error occured while creating backup folder". When I use disk utility to repair I get another error message: unable to repair disk unmountable.
Help me Obie One Canobie you are my last hope

I have confused myself with the facts! Started out keeping track of every step and every variable but have sort of lost it as we progress here. First I quit all applications then swapped connections between mouse port and backup disk port to influence possible bad connections question. Changed power outlet receptacle for the backup disk. Disabled the put-the-HD-to-sleep option. Then powered down the computerator.
Next started up computerator. Turned Time Machine ON and experienced multiple successful backups! Then I started up a few applications, Mail and Text Edit (but not Safari so far). Had a few more successes. After each backup, I used Disk Utility to verify the backup disk is still OK. This because the error about unable to unmount the backup disk seems to go hand in hand with Disk Utility finding the backup disk to be bad.
Put computer to sleep for the night. Upon starting up in the morning, and before doing anything else, I did a backup disk verification... BAD! Did a restart and verified the backup disk... OK.
Did a few Sleep-bad, Restart -OK repetitions.
It seems consistent: Sleeping the computer apparently messes up the backup disk but doing a Restart "repairs" it.
=============================
Now then, I don't understand everything I know here. Methinks that maybe keeping the HD from sleeping during lulls in activity has allowed successful backups through the day but manually putting everything to sleep for the night causes a return to the problem of spinning-back-up-too-slowly (which was explained earlier). Is there any truth in this?
I may abandon this Seagate thing for something more compatible. What's out there that we know works reliably for us?

Unable to purge disk buffers: Operation not permitted

I receive the follow prompt in Terminal when trying to purge.... what gives?
"Unable to purge disk buffers: Operation not permitted"

Restarting the computer purges RAM but, if you have OS 10.9 or 10.10, it won't change what you see.
We are starting to see a number of questions about purging/cleaning RAM. I suspect this is because people are using the obsolete methods of OS10.8 and older to see what RAM is used while running 10.9 and higher. They are assuming nothing about how RAM handling has changed as the Mac OS evolves.
Starting with Mavericks, a lot of free RAM is pre-reserved for maximum access speed. Example. My iMac (running 10.9.4) has 12 GB of RAM--That's a decent pile. My Activity Monitor Memory chart looks like this with Safari, Mail, Messages, and some other stuff running:
Note that almost all my 12GB is "used" but the computer runs at lightning speed. The new indicators are "Memory Pressure" and "Swap Used." Pressure should be green and Swap should be under about 100MB, and not shown in GB!
Here is an Apple article on what Activity Monitor reports for Memory since 10.9:
Activity Monitor: View memory usage
If you computer is running slow, then look a K Shaffer's comments--something other than Memory is much more likely the problem. I would expand his questions about third-party software to include the following questions:
1) Are you running any anti-virus/internet security applications?
2) Are you running any "cleaning/tune-up/optimizations" applications?
3) Any peer-to-peer or torrent downloading software?
4) Any third-party disk backup software that came bundled with an external hard drive?
5) Any online backup scheme other than iCloud or Dropbox (Carbonite; GoogleDrive; MS One Drive)?

Unable to read disk?

why do I keep getting an error message telling me I can't download movies from itunes because it is unable to read disk?

Did you change your media location or used a external hard drive to store your media, if not then try repairing your hard drive with disk utility also repair your permissions.

Unable to change the data in PSA

Hello All,
I have a delta failure because of invalid characters in one of the field and now i wanted to change the PSA. I have deleted the request from all data targets and started changing the error record, it is not showing all columns from PSA hence i am unable to change the data in required field.
Could you please let me know how will i see all columns from PSA. Thanks
Regards,Ashok

Hi Ashok,
To increase/decrease the number of columns that are displayed on the menu from the Settings option select Change display variants
Also if you want to see say all the failed records you can sort the order of the data using the Status column

Unable to change the data source of SAP system

Dear all,
We have install SAP netweaver EHP1 standalone java on oracle 10.2.0.5 on windows 2008 R2.
while installation i have given the central SLD system as solman,
By mistake i have deleted the system from SMSY.. now when i createed the system manually i am unable to change the data resource as SLD due to this i can start my SMD configuration
Request please let me know how to resolve this issue.
Thanks
Paresh

Hi Paresh,
You can proceed with deleting your SAP system from SMSY (along with connected technical content such as AS Java definition) and the run the LANDSCAPE FETCH through transaction SMSY_SETUP to have the correct definition of your SAP system in SMSY.
Following this, you could use the addon Landscape Verification (a new thing I learnt today!!!) to check the correctness of transaction SMSY. The following link details the Landscape verification 1.0 for SolMan:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e093b3ce-c034-2d10-01bc-b51f1691d3da?quicklink=index&overridelayout=true
Hope this helps sort out your issue.

Unable to change Profile picture in Windows 8

I recently upgraded to Windows 8. The upgrade imported a picture from my Windows 7 Skype, and now I am unable to change the profile picture. There is no menu at the top in Windows 8, which prevents me from changing the profile picture.
What are my options for correcting this, and also how does one sign out of Skype in Windows 8?
Thanks so much.

Although I'd love to provide a proper response, unfortunately I too have only questions, which I'd hope someone could answer. "Opening Skype and clicking on the picture" isn't as helpful as one would hope. With Windows 8 -- in either mode, through either Google Chrome or IE10 -- there is not only no menu or options with either right or left clicking, but no clear way to change a profile picture through any other means. I've tried everything I could think of -- literally wasting HOURS trying to change this thing. Googling the question gets me only fixes that don't appear to apply. In fact, the lack of coherent help regarding anything having to do with Windows 8 is nothing short of mindboggling -- and I consider myself a pretty good finder-of-information normally!!! I read elsewhere in these forums (unfortunately lost to me now that I have signed in) that it may be a problem relating to whether my browser is 32 or 64 bit (if I read it right). I have since tried to load Chrome in 64 bit.... probably unsuccessfully, given I still can't seem to do much differently. Being a bit of a techno-dud I don't know how to check which version I now have as even with the "about:version" function, the reply isn't definitive to my untrained eye (unless WOW64 means something?). I need things somewhat dummied down. I'm totally new to both Windows 8 and Skype (and for that matter Google Chrome, having always been a Firefox fan, which apparently is not working properly for Windows . ANY help that might be available would be greatly appreciated in making this experience less frustrating. Thank you for whatever you can do!!!

Unable to change "Your name" in BIS

I have my Gmail account set up in BIS and everything is working perfectly, however, I am unable to change the "Your name:" field to anything other than what's already there. I've tried deleting the account and re-adding it in there from the web site as well as from my BB to no avail. When I change the field, I don't get an error and I receive a message saying "Email account successfully updated." but it doesn't stay. For some reason, just my last name is in there (i.e. Smith) but I would like to change the "Your name:" field to my full name: John Smith.
Is there something I'm doing wrong? TIA!

What did your mobile operator have to say about it? This seems to be a problem specific to them. They can disable most of the fields your BIS account.
WhackBerry_

Unable to change setings, was in Siri, got 'jammed'

This 'Senior' got jammed-up. Unable to change settings, settings unresponsive and am stuck in Siri. Problem happened IN SIRI, now can't change settings to even access the Siri option.
SETTINGS WON'T LET ME ACCESS OPTIONS 'below level of Wallpaper'. Swipe won'r allow to go to any other screen in settings.
This happened in SIRI and I can't even disable 'turn-off' Siri
Unable to close applications on bottom of screen as well, as usually done.
The 'voice mode' is on, and that is what jammed everything up.
The only appications which show 'open on screen are' Messages,Phone, Settings and Safari, Mail, Music, and I am prevented from 'closing them'.
I did a turn-off, began again with the apple logo but can't reset.
Can't get past the first screen in my apps.
I BELIEVE it is a SIRI problem but can't change settings other than 'Airplane Mode through Wallpaper.'
I bet there is someone who would help a 'Grandma'!
What on Earth IS wrong?!!! and how can I get 'out of it' without going to the Apple Store.
Tiny store ,International Record as "Smallest Apple Store in the World", Santa Rosa, California..and they aren't much interested in giving-up that claim to fame!
it's usually like the 'final boarding of Noah's Ark in there" and NOT a fun place to be!!!
Sue,
Superwhiff

User's Group,
Immediate help from randers4 got me 'back in business'. I would have not beieved I could have done this without a trip to the store and a distant appointment date.
Things seemed messed-up beyond my ability to affect any change!
Alone, this would not have been possible. I feel I learned a great deal about the IOS 5 system's Siri quirks.
This is what it is all about.
People helping others who know less than they do!
Gratitude is such a small word,
this was monumental for me to have done even with the assistance of another person.
Superwhiff,
Sue from Santa Rosa

Unable to change Date Created in Metadata

Please help with my first post...
Unable to change Date Created field in Metadata.
I am a newspaper photographer sending .jpg pics with captions to my office from my iMac. They are viewed at the office on Windows PCs using SCC MediaGrid.
When changing Date Created in Metadata Invalid Format warning appears "Format should be ISO 8601 XML compliant, that is YYYY-MM-DDThh:mm[:ss][tz] (eg 2006-07-11T13:14:30-07:00)"
If 2009-09-26, for example, is entered then exported pictures opened up in Photoshop or shown on SCC MediaGrid do not display the date.
To get dates to show up I first have to open a pic in Photoshop, go to File Info, enter 26/9/09 in Date Created and Save As.
Next I have to Import this into Aperture where the Date Created shows as "20090926".
Using Lift Metadata and Stamp Metadata the date can be transferred to other pics.
Now when I export these pics the date does show up in Photoshop and SCC MediaGrid.
Can Date Created be typed straight into field in Aperture?...Very important when pics go into archive on a server.
Also if I hit Return key in a Metadata Caption, to type on the next line, both lines will appear as one with a small square in-between them when viewed on SCC MediaGrid on a Windows PC.
Thanks in anticipation.

Nick I don't generallt use the IPTC metadata, so I'm not sure I will be too much help.
What version of Aperture are you using? I tried both things and I didn't have any problems with the latest version of Aperture on my Mac.
I was able to enter a date into "Date Created" both with and without the time-zone adjustment. Can you tell us the exact string you tried to enter into the "Date Created" and exactly when you get the error? I tried to enter my time zone (eastern US) as "-5:00", but Aperture wouldn't let me enter the 5 and popped up the error message when I typed that key. I had to use "-05:00".
As for the caption, when I hit return, Aperture ends my edit. I cannot reproduce your described behavior of actually getting a new-line into the field. I suspect your problem (although I don't know how you get to your problem) is one of the following:
1) The IPTC standard doesn't tell if the software should use a Unix-style end-of-line (which is a line-feed), or a DOS/Windows style end-of-line (which is carriage-return followed by line-feed). Aperture may put in the Unix-style and your Windows programs don't know what to do with it.
2) The IPTC standard does indicate the end-of-line style, but either Aperture or your other programs don't follow it.
or
3) IPTC Metadata doesn't actually support end-of-line, so Aperture should not allow you to enter multiple lines, but it has a bug so it does allow you to do that.
Can you tell us where exactly you are editing the caption? I tried it in the inspector pane (on the left) in the "Metadata" tab, and then I hit the "IPTC" button at the bottom of the tab.
nathan

Unable to change font color from white

In any new or previously saved Pages documents, I am unable to view the font. I know the text is there, because when highlighted, the text shows as white, but I am unable to change it to any other color. This has never been a problem before. Ideas? Would this have something to do with not updating to iWork'09?

Welcome to Apple Discussions
If you're not running the latest versions & Software Update says your software is up to date, make sure the applications are where the installer initially put them. The updaters are very picky. If the location is not where the updater is programmed to look or if the folder doesn't have the name the updater looks for, it will not work. The applications cannot be renamed or moved. They must be in the iWork '08 or iWork '09 folder in Applications. That iWork folder must be named iWork '08 or iWork '09. If it doesn't have the '08 or '09 Software Update won't find them & the updaters won't work.

Unable to change status in messages

Hey guys,
Okay, so I am unable to change my status in messages or do anything for that matter.
My friends messages app looks different then mine and she actually has more options then me. It will not let me set to online status or anything, it's like disabled and I cannot figure it out. Also when I send a message from my mac, it will say my email when my friend recieves the message but then if I send it from my iphone it says my number, so it starts two different conversations.
This is annoying and when I called tech support they had no idea what I was talking about.
Any smart apple users out there

The new Messages app in Mountain Lion has two aspects. It integrates most of the features of the old iChat program (using AOL and Jabber transport mechanisms among others, which include the concept of on/offline status) with Apple's new iMessage transport mechanism (which doesn't).
Your phone-to-phone message are probably going through yet a third transport mechanism, SMS. You can set your phone to use iMessage transport to eligible recipients by going to Settings > Messages, turning iMessage to "ON", and including your AppleID (~email address) in "Receive At" along with your phone number.
We are told that when iOS6 is released this fall it may help combine the multiple conversations. It is not yet clear how.

Unable to change group text name or add person to some group texts in iOS 8

I really like the ability to change group text names as it helps me separate work group texts from personal especially when I have coworkers that have separate business phones. I'm unable to change the name of some group texts as the option is not there when I go into details. I'm also unable to add contact to the same group texts that I'm unable to change the name on. Is this a glitch or am I missing something?

Hi CaliWingsFan,
If you are having issues with renaming and adding users to group texts, you may want to try some things to troubleshoot.
First, quit all running applications and test again -
iOS: Force an app to close
Next, I would try restarting the iPhone -
Turn your iOS device off and on (restart) and reset
If the issue is still present, you may want to restore the iPhone as a new device -
iOS: How to back up your data and set up your device as a new device
Thanks for using Apple Support Communities.
Best,
Brett L

TimeMachine unable to change disk

Similar Messages

Maybe you are looking for