To Call an HTTPS webservice through Forms

Hi
I have followed http://st-curriculum.oracle.com/obe/forms/11g/sms_webservice/webservices_forms_11g.htm but this only covers HTTP connections. The java client that I am preparing uses HTTPS link.
Before importing the jar in Oracle Forms, we want to test if the jar works fine. So in the unix server, I try to execute the jar and I get java.net.UnknownHostException: wugateway2pi.westernunion.net..
This url will only allow access from the servers the third party has provided access to. So from the unix server we are able to ping and telnet this ip. We have installed the certificate they have provided local to the jar.
We did the same configuration in windows server when we used 10g and the connection went through successfully.
Can anyone please give steps on how to resolve this issue
thanks

Hi user10264958
>
I have followed http://st-curriculum.oracle.com/obe/forms/11g/sms_webservice/webservices_forms_11g.htm but this only covers HTTP connections. The java client that I am preparing uses HTTPS link.
Before importing the jar in Oracle Forms, we want to test if the jar works fine. So in the unix server, I try to execute the jar and I get java.net.UnknownHostException: wugateway2pi.westernunion.net..
>
That the jar is not running on Linux is your problem? The exception is probably coming from httpurlconnection because the host cannot be reached. This could because your Linux does not have the required network access.
But is this your problem?
>
This url will only allow access from the servers the third party has provided access to. So from the unix server we are able to ping and telnet this ip.
>
The server is trying to do mutual authentication and rightly so as this is a remittance system. Ping and telnet work for ip, but that does not mean you have access to the services. But is that your problem?
We have installed the certificate they have provided local to the jar.You installed in jar , but are you using it in your System.setProperty("javax.net.ssl.keyStore" or equivalent in Java?
Again, is this your problem?
>
We did the same configuration in windows server when we used 10g and the connection went through successfully.
Can anyone please give steps on how to resolve this issue
>
So Windows is not your issue. Then what is?
Articulating your problem accurately dramatically increases the chances of getting a resolution.
BTW, I have nothing against Java but why are you trying to use Java for calling a Webservice from Forms ? You have UTL_HTTP pacakage (Request and Response sub programs) that allow you to do this in PL/SQL. Of course you will need Wallet for HTTPS calls from PL.SQL.
More info here {thread:id=2396886}
Cheers,
PS : BTW the URL wugateway2pi.westernunion.net does not land on any web page. So no wonder you get unknown host exception.
Edited by: Prabodh on Jul 31, 2012 5:07 PM

Similar Messages

  • OSB 10.3.1 : Calling externall MTOM webservice through HTTPS

    Hi,
    We have OSB process that calls MTOM webservice via Business Service. It's works fine over HTTP connection.
    We secure the connection one-way ssl client, we imported public certificate to trusted keystore in wls.
    The business service calls the webservice over https, the Webservice receive the streaming and generates file.
    The problem is when the webservice returns result, the connection is froze and the wls where is the webservice generates this exception
    Couldn't create SOAP message due to exception: org.jvnet.mimepull.MIMEParsingException: Missing start boundary
    com.sun.xml.ws.protocol.soap.MessageCreationException: Couldn't create SOAP message due to exception: org.jvnet.mimepull.MIMEParsingException: Missing start boundary
    at com.sun.xml.ws.encoding.SOAPBindingCodec.decode(SOAPBindingCodec.java:292)
    at com.sun.xml.ws.transport.http.HttpAdapter.decodePacket(HttpAdapter.java:276)
    at com.sun.xml.ws.transport.http.HttpAdapter.access$500(HttpAdapter.java:93)
    at com.sun.xml.ws.transport.http.HttpAdapter$HttpToolkit.handle(HttpAdapter.java:432)
    at com.sun.xml.ws.transport.http.HttpAdapter.handle(HttpAdapter.java:244)
    at com.sun.xml.ws.transport.http.servlet.ServletAdapter.handle(ServletAdapter.java:134)
    at weblogic.wsee.jaxws.HttpServletAdapter$AuthorizedInvoke.run(HttpServletAdapter.java:272)
    at weblogic.wsee.jaxws.HttpServletAdapter.post(HttpServletAdapter.java:185)
    at weblogic.wsee.jaxws.JAXWSServlet.doPost(JAXWSServlet.java:180)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
    at weblogic.wsee.jaxws.JAXWSServlet.service(JAXWSServlet.java:64)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
    at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
    at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3498)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(Unknown Source)
    at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2180)
    at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2086)
    at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1406)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Caused by: org.jvnet.mimepull.MIMEParsingException: Missing start boundary
    at org.jvnet.mimepull.MIMEParser.skipPreamble(MIMEParser.java:290)
    at org.jvnet.mimepull.MIMEParser.access$200(MIMEParser.java:62)
    at org.jvnet.mimepull.MIMEParser$MIMEEventIterator.next(MIMEParser.java:130)
    at org.jvnet.mimepull.MIMEParser$MIMEEventIterator.next(MIMEParser.java:117)
    at org.jvnet.mimepull.MIMEMessage.makeProgress(MIMEMessage.java:186)
    at org.jvnet.mimepull.MIMEMessage.parseAll(MIMEMessage.java:168)
    at org.jvnet.mimepull.MIMEMessage.<init>(MIMEMessage.java:85)
    at com.sun.xml.ws.encoding.MimeMultipartParser.<init>(MimeMultipartParser.java:88)
    at com.sun.xml.ws.encoding.MimeCodec.decode(MimeCodec.java:180)
    at com.sun.xml.ws.encoding.SOAPBindingCodec.decode(SOAPBindingCodec.java:279)
    I tested over https the same webservice using java client WS (generated by jdeveloper) and that works fine.
    Any idea
    Thanks,
    Maroun

    Resolved
    The problem is coming from OSB it happens when Business Service invoke WS in HTTPS, BS sends twice the request the first one contains the right envelop and the second one contains in empty request.
    The Oracle Support helped me to resolve the problem; we changed the QoS (Quality Of Service) to Exactly once
    Maroun

  • Error while connecting to HTTPS WebService through Jdev

    I am having issues while trying to connect to a webservice that require SSL. Has anybody seen similar exception below or any suggestion/best practice docs of how to setup the cert?
    WARNING: Unable to connect to URL: https://itsolutions/AppIntegration/org/test/sendRequest.jpd due to java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target
    java.rmi.RemoteException: ; nested exception is:
         HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target

    Dear All,I am getting this error while connecting to ASDM Please help.Your ASA Image has a version number 8.2.1 which is not supported by ASDM 6.1(3)Show Version.....User Access VerificationPassword:
    Type help or '?' for a list of available commands.
    ASA-PT> en
    Password:ASA-PT# show verCisco Adaptive Security Appliance Software Version 8.2(1)
    Device Manager Version 6.1(3)Compiled on Tue 05-May-09 22:45 by builders
    System image file is "disk0:/asa821-k8.bin"
    Config file at boot was "startup-config"ASA-PT up 12 days 0 hoursHardware:   ASA5520, 512 MB RAM, CPU Pentium 4 Celeron 2000 MHz
    Internal ATA Compact Flash, 256MB
    BIOS Flash M50FW080 @ 0xffe00000, 1024KBEncryption hardware device : Cisco ASA-55x0 on-board accelerator (revision 0x0)
                                 Boot microcode   : CN1000-MC-BOOT-2.00
                                 SSL/IKE microcode: CNLite-MC-SSLm-PLUS-2.03
                                 IPSec microcode  : CNlite-MC-IPSECm-MAIN-2.04
    0: Ext: GigabitEthernet0/0  : address is 0024.14d2.1582, irq 9
    1: Ext: GigabitEthernet0/1  : address is 0024.14d2.1583, irq 9
    2: Ext: GigabitEthernet0/2  : address is 0024.14d2.1584, irq 9
    3: Ext: GigabitEthernet0/3  : address is 0024.14d2.1585, irq 9
    4: Ext: Management0/0       : address is 0024.14d2.1581, irq 11
    5: Int: Internal-Data0/0    : address is 0000.0001.0002, irq 11
    6: Int: Internal-Control0/0 : address is 0000.0001.0001, irq 5
    <--- More --->ThanksTabrez
    Hi Tabrez,
    ASA5520 version 8.2.1 is supported with  ASDM 6.2(1 and above). Recommended: 6.2(3).check out the below link hope that c;ear out your query !!
    http://www.cisco.com/en/US/docs/security/asa/compatibility/asamatrx.html
    If helpful do rate the post
    Ganesh.H

  • Calling oracle command window through forms

    I need to call oracle command window in the forms. in the sence when i clicked a button in forms then oracle window has to open.
    Is that possible to call a oracle command window in forms.
    Please help me in this.
    Thanks in advance,
    raju.

    I need to call oracle command window in the forms. in
    the sence when i clicked a button in forms then
    oracle window has to open.
    Is that possible to call a oracle command window in
    forms.
    Please help me in this.
    Thanks in advance,
    raju.What do you mean by "Oracle command window"???

  • How to call a particular Customer through form Personalization

    Hi,
    Environment :- R12
    I have a requirement, to search a Customer info based on Sales Order form.
    Requirement:
    1. Open the Sales Order form, Query any order
    Now the user wants to pull the XBC Cusotmer information which was in the Customer Field.
    Naturally we can do by form personalization but here the Customer window is web based one. Can anybody have a hands-on on this. Please let me know.
    Thanks,
    ABR

    Pl see if the steps in MOS Doc 856139.1 ((Pics) How To Create Personalized Views For All Users In Professional Buyer Work Center) can help.
    HTH
    Srini

  • Calling HTTPS webservice from BPEL

    Hi All,
    We have enable SSL on soa 11g and its working fine.
    We have developed and deployed a process on same soa server, Now we are trying to invoke this service (process) in another BPEL process.
    While developing the second BPEL process in jdev we are not getting any error but while deploying (on the same server) its throwing error.
    The second process gets deployed without any error if we dont call the HTTPS webservice(first BPEL process).
    Please help.
    Error desc:
    Error during deployment: Deployment Failed: Unable to find a WSDL that has a definition for service {http://oracle.com/sca/soapservice/TSystemOrderProcessing/TSystemOrderProcessing/receivePO}receivePO and port execute_pt. Please make sure that the port attribute for the binding defined in the composite file is correct by checking the namespace, service name, and port name. In addition, check that the WSDL associated with the binding namespace is imported and currently reachable (check the import nodes at the top of the composite file). Finally, validate the HTTP proxy settings for the server..
    [05:30:06 PM] Check server log for more details.
    Regards,
    Surendra

    Hi Surendra,
    It seems that WSDL for service receivePO is not available at the deployment time.
    Below threads should help you out -
    Partner Link in 11g
    SOA 11g FOD Demo Deploy Issue
    Regards,
    Anuj

  • OSB inbound http webservice integration with OAM

    Hi,
    I have a requirment where I need to protect OSB inbound http webservice with OAM. So that OAM can fetch the user details from webservice SOAP header & authenticate the user against LDAP.
    Can someone tell me if this is a feasible approach. If yes, please share the details as to what configuration changes need to be done at OAM & OSB end.
    If not, is there any alternative approach to secure webservice with OAM.
    This webservice is not called from any web application. External sources dirctly make a call to this webservice through some java client.

    The solution to this issue is to put following line in mod_wl_ohs.conf file
    MatchExpression /imaging WebLogicHost=test-ipm.atfoods.com|WebLogicPort=16000
    The complete element will look like this.
    <IfModule weblogic_module>
    WebLogicHost test-ipm.atfoods.com
    WebLogicPort 7001
    Debug ALL
    WLLogFile e:/logs/weblogic_ohs.log
    MatchExpression /imaging WebLogicHost=test-ipm.domain.com|WebLogicPort=16000
    </IfModule>
    <Location /imaging>
    SetHandler weblogic-handler
    WebLogicHost 192.168.140.74
    WeblogicPort 16000
    Debug ALL
    WLLogFile f:/log/wlipm.log
    </Location>
    Make sure that you use IP for Weblogic host in 2nd element and not the host name.
    Thanks & Regards,
    Vikrant Korde

  • Problem Calling WebService in Form

    Hi,
    I created a form to call a WebService and works fine in forms builder. When i passed the form to the application server i have a error "FRM-40735: ORA-105100". The Webservice is running on localhost, and the application server is installed in the same machine.
    The Java code used to create the connection is:
    m_httpConnection = new OracleSOAPHTTPConnection();
    Or Should I use the next code?
    Properties prop = new Properties();
    prop.setProperty(OracleSOAPHTTPConnection.PROXY_HOST, MYHOST");
    prop.setProperty(OracleSOAPHTTPConnection.PROXY_PORT,"MYPORT");
    m_httpConnection = new OracleSOAPHTTPConnection(prop);
    What values should have Myhost and MyPort ?
    Please help!
    best regards,
    TT

    I don't have a proxy. I have DevSuite10gr2 installed and have a webservice running on http://LX_PPORT:8988/TheService-WebService-context-root/GecaClipServiceSoap
    and the proxy running in the same machine. My machine name is LX_PPORT.
    When running from Forms Builder works fine.
    When i run from the internet explorer http://localhost:8889/forms/frmservlet?config=gettoken have that error.
    what configuration should i use?
    Thanks for your help.
    best regards, TT

  • Issues in calling Sql Loader through forms developer (10g)

    Hi,
    I am developing a form(in 10g) ,in which I am calling sql loader for loading data onto a oracle database table from external source (e.g. data file is a .CSV file).
    But , somehow the sql loader is not getting executed.
    Here , I am giving the environment settings , approach i am taking;
    This is a distributed system , both the application server,and database server are mounted on two different servers.
    The form is delpoyed on the application server.
    The database table , and the sql loader are configured on the databse side.
    I am using host(<sql loader command>) command to invoke the Operating System command through forms.
    The sql loader is working ok , and the data is getting loaded successfully onto the required database table when I am executing the sql loader command on Unix prompt , but through the forms , it's not working.
    Do I need to change some environmental setting to make this work...
    Any quick help in this regard is highly appreciated.
    Thanks.

    Hi Craig,
    I have already tried out the option of calling sql loader through stored procedure,but this is not working ...
    could you please share any examples to do so ...
    code snippet i am using in forms:
    declare
    usid get_application_property(userid);
    pwd get_application_property(password);
    db get_application_property(host);
    msqlldr varchar2(250);
    begin
    msqlldr:='/u01/oracle/formss/bin/sqlldr' username=<uid/pwd@db> control=<control file name> data=<data file name> log=<log file name>
    hosts(msqlldr);
    end;
    Note that sqlldr command ,for that matter any unix shell command is not working through the hosts() command ...
    could you please suggest any way out ...
    Thanks.

  • Calling SQL Loader through Forms using webutils

    hi all,
    Can anyone tell me how can i call a sqlldr through forms 9i using webutils?Let me know if anyone have a sample script.
    Thanks
    Best Regards,
    Abrar
    [email protected]

    If your middle tier and database server are both unix boxes you could use host(rsh...)
    Are you suggesting webutil because your data to be loaded is on the PC ? If so you probably want to move it then load it as two seperate operations.
    If there isn't too much data you also have the option of using text_io to load it into a forms database block, which has the advantage that the user can see what is happening, and validation rules could be added if required.

  • Retrieve Data from the Webservice through Data connection in Adobe Form

    hi
                                            i done Student ejb application
    i.e, Create,Update,Retrieve,Delete operation. I create the WebServices to these operations. Present  i connect the webservice through data connection . create operation is done successfully, but i dont know how to retrieve the the student details through data connection. how i can bind the retrieve values to the table in adobe form .how to bind from webservices to adobe form without context node.

    I had the same problem in SAP B1 2007. Report worked fine except when it was open from B1. Generally there may be different problems. In my case the same problem was caused by using some procedure which was in a specific schema. Changing the schema into "dbo" solved the problem.
    Radoslaw Blaniarz

  • OSB - call HTTPS webservice

    Hi!
    I have to call a HTTPS (external) webservice from OSB. I created a business service with the HTTPS webservice wsdl, but I don't know how I should configure the business service. I have a client and a server certificate.
    Could anyone help me?
    Thank You very much!
    Viktor

    Hi Manoj!
    Thanks for help! Yes, you are right, I missed some configuration. I got a new error, which I cannot solve. I tested the call of secure webservice in the test console but I cannot get back the control, because the console just prints 'Executing requests...' and it waits...
    There is an error at the end of log, but i think the SSL handshake is successful, doesn't it?
    Could You help me please?
    Thanks!
    <May 10, 2010 2:36:05 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <Use Certicom SSL with Domestic strength>
    <May 10, 2010 2:36:05 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <Empty CA List is enabled :false>
    <May 10, 2010 2:36:05 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <Ignoring not supported JCE Mac: SunJCE version 1.6 for algorithm HmacSHA1>
    <May 10, 2010 2:36:05 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <Will use default Mac for algorithm HmacSHA1>
    <May 10, 2010 2:36:05 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <Ignoring not supported JCE Mac: SunJCE version 1.6 for algorithm HmacMD5>
    <May 10, 2010 2:36:05 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <Will use default Mac for algorithm HmacMD5>
    <May 10, 2010 2:36:05 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <Ignoring not supported JCE KeyAgreement: SunJCE version 1.6 for algorithm DiffieHellman>
    <May 10, 2010 2:36:05 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <Will use default KeyAgreement for algorithm DiffieHellman>
    <May 10, 2010 2:36:05 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <Will use default KeyAgreement for algorithm ECDH>
    <May 10, 2010 2:36:05 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <Using JCE Cipher: SunJCE version 1.6 for algorithm DESede/CBC/NoPadding>
    <May 10, 2010 2:36:05 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <Using JCE Cipher: SunJCE version 1.6 for algorithm DES/CBC/NoPadding>
    <May 10, 2010 2:36:05 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <Using JCE Cipher: SunJCE version 1.6 for algorithm AES/CBC/NoPadding>
    <May 10, 2010 2:36:05 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <Using JCE Cipher: SunJCE version 1.6 for algorithm RC4>
    <May 10, 2010 2:36:05 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <Using JCE Cipher: SunJCE version 1.6 for algorithm RSA>
    <May 10, 2010 2:36:05 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <Using JCE Cipher: SunJCE version 1.6 for algorithm RSA/ECB/NoPadding>
    <May 10, 2010 2:36:05 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <SSL Session TTL :90000>
    <May 10, 2010 2:36:05 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <DefaultHostnameVerifier: allowReverseDNS=false>
    <May 10, 2010 2:36:05 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <SSLSetup: loading trusted CA certificates>
    <May 10, 2010 2:36:05 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <SSL enableUnencryptedNullCipher= false>
    <May 10, 2010 2:36:05 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <SSLContextManager: loading server SSL identity>
    <May 10, 2010 2:36:05 PM CEST> <Notice> <Security> <BEA-090171> <Loading the identity certificate and private key stored under the alias mavir from the JKS keystore file /opt/oracle/osb_home/user_projects/domains/osb_domain/security/mavir.jks.>
    <May 10, 2010 2:36:05 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <Loaded public identity certificate chain:>
    <May 10, 2010 2:36:05 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <Subject: CN=kapalk1.mavir.hu, OU=FIO, O=MAVIR ZRt., L=Budapest, ST=Budapest, C=HU; Issuer: CN=NetLock Uzleti (Class B) Tanusitvanykiado, OU=Tanusitvanykiadok, O=NetLock Halozatbiztonsagi Kft., L=Budapest, C=HU>
    <May 10, 2010 2:36:05 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <Subject: CN=NetLock Uzleti (Class B) Tanusitvanykiado, OU=Tanusitvanykiadok, O=NetLock Halozatbiztonsagi Kft., L=Budapest, C=HU; Issuer: CN=NetLock Uzleti (Class B) Tanusitvanykiado, OU=Tanusitvanykiadok, O=NetLock Halozatbiztonsagi Kft., L=Budapest, C=HU>
    <May 10, 2010 2:36:05 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <Using JCE Cipher: SunJCE version 1.6 for algorithm RSA/ECB/NoPadding>
    <May 10, 2010 2:36:29 PM CEST> <Info> <Health> <BEA-310002> <32% of the total memory in the server is free>
    <May 10, 2010 2:36:41 PM CEST> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the JKS keystore file /opt/oracle/osb_home/user_projects/domains/osb_domain/security/mavir.jks.>
    <May 10, 2010 2:36:41 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <SSLContextManager: loaded 2 trusted CAs from /opt/oracle/osb_home/user_projects/domains/osb_domain/security/mavir.jks>
    <May 10, 2010 2:36:41 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <Subject: SERIALNUMBER=ICA - 595029, OU=Damas Energy, O="Slovenska elektrizacna prenosova sustava, a.s.", L=Bratislava, ST=Slovakia, CN=damas.sepsas.sk, C=SK; Issuer: O=Prvni certifikacni autorita a.s., CN=I.CA - Standard root certificate, C=CZ>
    <May 10, 2010 2:36:41 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <Subject: CN=NetLock Uzleti (Class B) Tanusitvanykiado, OU=Tanusitvanykiadok, O=NetLock Halozatbiztonsagi Kft., L=Budapest, C=HU; Issuer: CN=NetLock Uzleti (Class B) Tanusitvanykiado, OU=Tanusitvanykiadok, O=NetLock Halozatbiztonsagi Kft., L=Budapest, C=HU>
    <May 10, 2010 2:36:41 PM CEST> <Info> <WebLogicServer> <BEA-000307> <Exportable key maximum lifespan set to 500 uses.>
    <May 10, 2010 2:36:41 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <clientInfo has new style certificate and key>
    <May 10, 2010 2:36:43 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <Filtering JSSE SSLSocket>
    <May 10, 2010 2:36:43 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <SSLIOContextTable.addContext(ctx): 24258873>
    <May 10, 2010 2:36:43 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <SSLSocket will be Muxing>
    <May 10, 2010 2:36:43 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <write SSL_20_RECORD>
    <May 10, 2010 2:36:43 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <isMuxerActivated: false>
    <May 10, 2010 2:36:43 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <2219121 SSL3/TLS MAC>
    <May 10, 2010 2:36:43 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <2219121 received HANDSHAKE>
    <May 10, 2010 2:36:43 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <HANDSHAKEMESSAGE: ServerHello>
    <May 10, 2010 2:36:43 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <HANDSHAKEMESSAGE: Certificate>
    <May 10, 2010 2:36:43 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <Validating certificate 0 in the chain: Serial number: 1398096
    Issuer:C=CZ, CN=I.CA - Standard root certificate, O=Prvni certifikacni autorita a.s.
    Subject:C=SK, CN=damas.sepsas.sk, ST=Slovakia, L=Bratislava, O=Slovenska elektrizacna prenosova sustava, a.s., OU=Damas Energy, ?=ICA - 595029
    Not Valid Before:Tue Aug 11 12:07:51 CEST 2009
    Not Valid After:Wed Aug 11 12:07:51 CEST 2010
    Signature Algorithm:SHA1withRSA
    >
    <May 10, 2010 2:36:43 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <validationCallback: validateErr = 0>
    <May 10, 2010 2:36:43 PM CEST> <Debug> <SecuritySSL> <BEA-000000> < cert[0] = Serial number: 1398096
    Issuer:C=CZ, CN=I.CA - Standard root certificate, O=Prvni certifikacni autorita a.s.
    Subject:C=SK, CN=damas.sepsas.sk, ST=Slovakia, L=Bratislava, O=Slovenska elektrizacna prenosova sustava, a.s., OU=Damas Energy, ?=ICA - 595029
    Not Valid Before:Tue Aug 11 12:07:51 CEST 2009
    Not Valid After:Wed Aug 11 12:07:51 CEST 2010
    Signature Algorithm:SHA1withRSA
    >
    <May 10, 2010 2:36:43 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <weblogic user specified trustmanager validation status 0>
    <May 10, 2010 2:36:43 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <SSLTrustValidator returns: 0>
    <May 10, 2010 2:36:43 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <Trust status (0): NONE>
    <May 10, 2010 2:36:43 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <Performing hostname validation checks: damas.sepsas.sk>
    <May 10, 2010 2:36:43 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <HANDSHAKEMESSAGE: ServerHelloDone>
    <May 10, 2010 2:36:43 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <Ignoring not supported JCE Mac: SunJCE version 1.6 for algorithm HmacMD5>
    <May 10, 2010 2:36:43 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <Will use default Mac for algorithm HmacMD5>
    <May 10, 2010 2:36:43 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <Ignoring not supported JCE Mac: SunJCE version 1.6 for algorithm HmacSHA1>
    <May 10, 2010 2:36:43 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <Will use default Mac for algorithm HmacSHA1>
    <May 10, 2010 2:36:43 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <Will use default Mac for algorithm MD5>
    <May 10, 2010 2:36:43 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <Using JCE Cipher: SunJCE version 1.6 for algorithm RC4>
    <May 10, 2010 2:36:43 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <Ignoring not supported JCE Mac: SunJCE version 1.6 for algorithm HmacMD5>
    <May 10, 2010 2:36:43 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <Will use default Mac for algorithm HmacMD5>
    <May 10, 2010 2:36:43 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <Ignoring not supported JCE Mac: SunJCE version 1.6 for algorithm HmacSHA1>
    <May 10, 2010 2:36:43 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <Will use default Mac for algorithm HmacSHA1>
    <May 10, 2010 2:36:43 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <Using JCE Cipher: SunJCE version 1.6 for algorithm RSA>
    <May 10, 2010 2:36:43 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <write HANDSHAKE, offset = 0, length = 134>
    <May 10, 2010 2:36:43 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <write CHANGE_CIPHER_SPEC, offset = 0, length = 1>
    <May 10, 2010 2:36:43 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <Using JCE Cipher: SunJCE version 1.6 for algorithm RC4>
    <May 10, 2010 2:36:43 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <Ignoring not supported JCE Mac: SunJCE version 1.6 for algorithm HMACMD5>
    <May 10, 2010 2:36:43 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <Will use default Mac for algorithm HMACMD5>
    <May 10, 2010 2:36:43 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <Ignoring not supported JCE Mac: SunJCE version 1.6 for algorithm HmacMD5>
    <May 10, 2010 2:36:43 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <Will use default Mac for algorithm HmacMD5>
    <May 10, 2010 2:36:43 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <Ignoring not supported JCE Mac: SunJCE version 1.6 for algorithm HmacSHA1>
    <May 10, 2010 2:36:43 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <Will use default Mac for algorithm HmacSHA1>
    <May 10, 2010 2:36:43 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <write HANDSHAKE, offset = 0, length = 16>
    <May 10, 2010 2:36:43 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <isMuxerActivated: false>
    <May 10, 2010 2:36:44 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <2219121 SSL3/TLS MAC>
    <May 10, 2010 2:36:44 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <2219121 received CHANGE_CIPHER_SPEC>
    <May 10, 2010 2:36:44 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <Using JCE Cipher: SunJCE version 1.6 for algorithm RC4>
    <May 10, 2010 2:36:44 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <Ignoring not supported JCE Mac: SunJCE version 1.6 for algorithm HMACMD5>
    <May 10, 2010 2:36:44 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <Will use default Mac for algorithm HMACMD5>
    <May 10, 2010 2:36:44 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <isMuxerActivated: false>
    <May 10, 2010 2:36:44 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <2219121 SSL3/TLS MAC>
    <May 10, 2010 2:36:44 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <2219121 received HANDSHAKE>
    <May 10, 2010 2:36:44 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <HANDSHAKEMESSAGE: Finished>
    <May 10, 2010 2:36:44 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <Ignoring not supported JCE Mac: SunJCE version 1.6 for algorithm HmacMD5>
    <May 10, 2010 2:36:44 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <Will use default Mac for algorithm HmacMD5>
    <May 10, 2010 2:36:44 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <Ignoring not supported JCE Mac: SunJCE version 1.6 for algorithm HmacSHA1>
    <May 10, 2010 2:36:44 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <Will use default Mac for algorithm HmacSHA1>
    <May 10, 2010 2:36:44 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <write APPLICATION_DATA, offset = 0, length = 293>
    <May 10, 2010 2:36:44 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <write APPLICATION_DATA, offset = 0, length = 360>
    <May 10, 2010 2:36:44 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <write APPLICATION_DATA, offset = 0, length = 8>
    <May 10, 2010 2:36:44 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <SSLIOContextTable.findContext(sock): 668702>
    <May 10, 2010 2:36:44 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <SSLIOContextTable.findContext(sock): 668702>
    <May 10, 2010 2:36:44 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <activateNoRegister()>
    <May 10, 2010 2:36:44 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <SSLFilterImpl.activate(): activated: 19707054 5292918>
    <May 10, 2010 2:36:50 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <15246932 read(offset=0, length=4080)>
    <May 10, 2010 2:36:50 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <isMuxerActivated: true>
    <May 10, 2010 2:36:50 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <hasSSLRecord()>
    <May 10, 2010 2:36:50 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <hasSSLRecord returns true>
    <May 10, 2010 2:36:50 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <2219121 SSL3/TLS MAC>
    <May 10, 2010 2:36:50 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <2219121 received HANDSHAKE>
    <May 10, 2010 2:36:50 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <NEW ALERT with Severity: WARNING, Type: 100
    java.lang.Exception: New alert stack
    at com.certicom.tls.record.alert.Alert.<init>(Unknown Source)
    at com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessages(Unknown Source)
    at com.certicom.tls.record.MessageInterpreter.interpretContent(Unknown Source)
    at com.certicom.tls.record.MessageInterpreter.decryptMessage(Unknown Source)
    at com.certicom.tls.record.ReadHandler.processRecord(Unknown Source)
    at com.certicom.tls.record.ReadHandler.readRecord(Unknown Source)
    at com.certicom.tls.record.ReadHandler.read(Unknown Source)
    at com.certicom.io.InputSSLIOStreamWrapper.read(Unknown Source)
    at weblogic.socket.SSLFilterImpl.isMessageComplete(SSLFilterImpl.java:202)
    at weblogic.socket.SocketMuxer.readReadySocketOnce(SocketMuxer.java:896)
    at weblogic.socket.SocketMuxer.readReadySocket(SocketMuxer.java:840)
    at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:130)
    at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
    at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
    >
    <May 10, 2010 2:36:50 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <write ALERT, offset = 0, length = 2>
    <May 10, 2010 2:36:50 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <isMuxerActivated: true>
    <May 10, 2010 2:36:50 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <hasSSLRecord()>
    <May 10, 2010 2:36:50 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <hasSSLRecord returns false 1>
    <May 10, 2010 2:36:50 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <15246932 Rethrowing InterruptedIOException>
    <May 10, 2010 2:36:50 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <15246932 read(offset=0, length=8192)>
    <May 10, 2010 2:36:50 PM CEST> <Debug> <SecuritySSL> <BEA-000000> <isMuxerActivated: false>

  • Call webservices through asp do net page

    Anyone got an example of ASP.NET that will call a webservices configure for Oracle Weblogic 12c
    I can install the web services on weblogic now need to test through a web page before handing off to the developers.
    Can anyone help provide an example how to run the webservices through ASP.NET page?
    Cheers

    I believe you are at the wrong forum. However as far as I know like in Jdeveloper ASP has webservice proxy class so you can show wsdl and this will be your starting point.

  • Call WebService through EJB

    Hi friends,
    I have created one web service , how can i call that web service through ejb . Is this possible ?.. can anybody help me....
    Thanks and Regards,
    Krish

    Hi Krish,
    This recent [thread|How to Call webservice by another webservice; deals with the same question. See the answers / links there.
    Hope it helps!
    -- Vladimir

  • Calling HTTPS Webservice error

    Hello friends,
    I am trying to call https Webservice SSL on ADS. However, it still did not work. I am getting error like "Error attempting to read from file".
    If you have experience on configuring Webservice SSL, please advise. Your advice is much appreciated.
    Best Regards,
    Fatih

    Hello,
    I am no basis guy, but maybe one of these could help:
    ADS Installation and configuration:
    http://help.sap.com/saphelp_nwmobile71/helpdata/en/37/504b8cbc2848a494facfdc09a359b1/frameset.htm
    Troubleshooting for ADS configuration:
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30ec0508-9438-2c10-f393-a41fb255698d?quicklink=index&overridelayout=true
    ADS tests
    http://help.sap.com/saphelp_nwmobile71/helpdata/en/43/f31e3082221595e10000000a1553f7/content.htm
    Regards Otto

Maybe you are looking for