ToC stopped working on deadline day

I have an InDesign book project, over 300 pages, due at the printer today.
This morning my table of contents stopped working properly, it no longer references most of my chapters. I'm getting ToC references for 3 out of 37 chapters.
I've tried creating a new book file: no help.
I've tried removing and re-adding chapters to the book: no help.
I've tried rebuilding the ToC style: no help.
I've tried reapplying the paragraph styles which are supposed to be referenced: no help.
I've tried adding new text objects to the missing chapters, these do show up in the ToC.
If I copy the content out of a chapter and into a new document, it will be show up. But if I do this to all 34 missing chapters I will A) miss the deadline, B) lose all my see[also] index references, and C) go mad.
Has anyone seen this before?
Got any ideas or suggestions for a fix?
[panicking]

I'll try the .inx route. That's a good suggestion, thanks.
Yes, I do have 'Include Book Documents (bookName)' ticked and it is showing the correct book name. Definitely worth checking for the obvious mistake
[edited to add]
Ixnay on the .inx, eh?*
*That is to say: the InDesign Interchange format export-import tango did not help.

Similar Messages

My Timecapsule Stops Working every few days!

I have a 2TB Timecapsule that has worked flawlessly for about 18 months. Over the last month it has stopped working every few days. When I say it stops working the wirless networks go off and the wired router stops. The lights are green on the back where the cables connect and on front I have a green status light. But the devices stops functioning. I pull the power and wait a little while and plug it back in and everything works again for a few days (could be a week) could be 2-3 days.
It is running the latest firmware and I haven't changed its configuration in many months.
No idea what to do... Any sugestions?
Joe

The lockup is across all devices??
Are any still working when the computer say is unable to connect?
It could be the latest firmware that is the problem.. that changed about 1-2months ago.
You can try doing a factory reset and a new clean setup but more than likely the issue will continue.
To go back to earlier firmware hold down the option key when you choose firmware. It will then show older as well as new versions.. Select 7.6.1 or even 7.5.2
Factory reset after the firmware and do the setup again.

Zoom-in, zoom-out pinch gesture stopped working a few days ago for no apparent reason.

Zoom-in, zoom-out pinch gesture stopped working a few days ago for no apparent reason. I went to Preferences>Gestures, turned off the selection, turned it on again, rebooted, etc. HELP. Any suggestions?

Try Settings>General>Siri>Off. Restart the phone then go back and turn Siri on again. It can take a few minutes for Siri to totally activate again.

My skype number stopes working in 9 days

Hi,
My skype number says its going to stop working in 9 days and id like to keep the same number for another 3 months, how do i make that happend?
Thanks for your help

Sign into your Skype account page, look for Manage Features, select Skype Number tab, click "settings" below your number, check Billing info on right hand side.

I hve pop up from adobe that tell me they have problem with my paiement and billing information and to go in my account or my lisence will stop working in 25 days

I have pop up from adobe that tell me they have problem with my paiement and billing information and to go in my account or my lisence will stop working in 25 days again... I can't find anything wrong in my account infos. What do I need to check and change? Adobe takes the money directly on my credit card since almost 2 years and I haven't change anything sicne then. The expiration date is good. Also, I'm not able to contact the Adobe support, it's not available.

ImprimerieModerne, my response of about being unable to find the CC was for Kathy P. The issue that you are facing is being worked upon.
I am sorry for the confusion.
Regards
Rajshree

Acrobat Distiller has stopped working (not 30 day issue)

I've been running CS6 on my Windows 7, 64 bit machine since at least October. I had the 30 day issue at the 30 day mark, but resolved it and it's worked flawlessly for months after that. Now, I get an error message that says Acrobat Distiller has stopped working. My only option is to close that window. Acrobat continues to work to read, edit and save an already created PDFs. Here are where I experience errors.
I can create a new PDF within Acrobat. If I click "Create PDF" then choose a Word Doc, it gives me at least two times the error message that Acrobat Distiller has stopped working. If I keep closing that message, eventually the pdf will have been created and will be in the Acrobat window and the file will be saved.
I can't print to PDF at all. When I try from within Acrobat, I see a little window that says it's checking fonts, then the Distiller stopped working error message. When I try printing to pdf from other programs (have tried Word, Firefox), crashes. It could be a one page document with just text, or something with pictures - no go. I just tested it again - now Acrobat is not responding. I can't end the Acrobat process - have tried closing the window, and saying end process, tried ending Acrobat from within task manager, tried ending the acrobat and acrotray processes - multiple times in Task Manager and Acrobat won't close.
I don't know how to fix this. I've checked to make sure Acrobat was updated; I've updated my Windows; I've reinstalled Acrobat. Nothing fixes it.
When I run Acrobat Distiller, it freezes seemingly in the midst of checking fonts.   Here is the text of the problem details section of the error message I get:
Problem Event Name:    InPageError
Error Status Code:    c000009c
Faulting Media Type:    00000003
OS Version:    6.1.7601.2.1.0.256.1
Locale ID:    1033
Additional Information 1:    0a9e
Additional Information 2:    0a9e372d3b4ad19135b953a78882e789
Additional Information 3:    0a9e
Additional Information 4:    0a9e372d3b4ad19135b953a78882e789
Any advice?
Roxy

I think I may have fixed my problem... I am no longer seeing the Distiller stopped working pop up and I am now able to print to PDF
Win 7 Ultimate 64 bit
My Fonts and program are all installed on the same drive thus preventing me from gaining access to Distiller to change the settings. Windows would not let me make any changes to the Default Font folder.
This is what I did...
Not knowing which font(s) where causing the problem, I moved all but protected fonts (automatically labelled) from the Window's Font folder and placed them in a temporary folder.
I restarted Distiller DC and great news...the program did not crash and I was able to change the settings to temporarily not include the Windows Fonts .No more pop ups and I can now print to PDF!
What I am going to do..
Through the process of elimination, I will gradually restore the fonts I removed from from the Window's folder to find the culprits(s)
Once I am satisfied that the problem Font(s) are found and no longer included in the Window's Font folder, I will change the settings in Distiller back (permanently) to include the Window's Font folder.
In closing, and because so many others are having the same issues, I really do think it would be prudent for Adobe to make the necessary adjustments to their program(s) to prevent this kind of issue.
Thanks
Kathy

ADFapplication stops working after few days of uptime : invalidobjname

We are currently doing uptime testing of our prodcut. We are using JDEVADF_11.1.1.7.0_GENERIC_130226.1400.6493. After 3 days uptime our application stops working and we are seeing following errors in the log :-
oracle.jbo.InvalidObjNameException: JBO-25005: Object name ViewDefMetadataManager4569314_-2147483397 of type View Row Set is invalid.
at oracle.jbo.server.ViewObjectImpl.getRowSetName(ViewObjectImpl.java:12683)
at oracle.jbo.server.ViewObjectImpl.createViewRowSet(ViewObjectImpl.java:12728)
at oracle.jbo.server.ViewObjectImpl.createViewRowSet(ViewObjectImpl.java:12718)
at oracle.jbo.server.ViewObjectImpl.getDefaultRowSet(ViewObjectImpl.java:2567)
at oracle.jbo.server.ViewObjectImpl.setIterMode(ViewObjectImpl.java:11165)
at oracle.adf.model.bean.DCDataVO.init(DCDataVO.java:148)
at oracle.adf.model.bean.DCBeanDataControl.executeIteratorBindingIfNeeded(DCBeanDataControl.java:996)
at oracle.adf.model.binding.DCIteratorBinding.executeQueryIfNeeded(DCIteratorBinding.java:2168)
at oracle.adf.model.binding.DCBindingContainer.internalRefreshControl(DCBindingContainer.java:3253)
at oracle.adf.controller.internal.binding.TaskFlowRegionController.doRegionRefresh(TaskFlowRegionController.java:253)
at oracle.adf.controller.internal.binding.TaskFlowRegionController.refreshRegion(TaskFlowRegionController.java:119)
at oracle.adf.model.binding.DCBindingContainer.internalRefreshControl(DCBindingContainer.java:3211)
at oracle.adf.controller.internal.binding.TaskFlowRegionController.doRegionRefresh(TaskFlowRegionController.java:253)
at oracle.adf.controller.internal.binding.TaskFlowRegionController.refreshRegion(TaskFlowRegionController.java:119)
at oracle.adf.model.binding.DCBindingContainer.internalRefreshControl(DCBindingContainer.java:3211)
at oracle.adf.controller.internal.binding.TaskFlowRegionController.doRegionRefresh(TaskFlowRegionController.java:253)
at oracle.adf.controller.internal.binding.TaskFlowRegionController.refreshRegion(TaskFlowRegionController.java:119)
at oracle.adf.model.binding.DCBindingContainer.internalRefreshControl(DCBindingContainer.java:3211)
at oracle.adf.model.binding.DCBindingContainer.refresh(DCBindingContainer.java:2889)
at oracle.adf.model.binding.DCBindingContainer.internalRefreshControl(DCBindingContainer.java:3202)
at oracle.adf.model.binding.DCBindingContainer.refresh(DCBindingContainer.java:2889)
at oracle.adf.controller.faces.lifecycle.FacesPageLifecycle.prepareRender(FacesPageLifecycle.java:82)
at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener$5.before(ADFPhaseListener.java:516)
at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener.beforePhase(ADFPhaseListener.java:77)
at oracle.adfinternal.controller.faces.lifecycle.ADFLifecyclePhaseListener.beforePhase(ADFLifecyclePhaseListener.java:45)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:237)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:266)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:131)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:447)
at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:447)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177)
at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.epm.fm.servlets.ExternalHfmSecurityServlet.doFilter(ExternalHfmSecurityServlet.java:60)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:181)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:163)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Looking at the trace it iloks weird that it is adding a -ve integer -2147483397 into the instance name.
Edited by: Abhishek on Apr 20, 2013 8:20 AM
Edited by: Abhishek on Apr 20, 2013 4:16 PM

After looking at ADF source code, ApplicationModuleImpl.doCreateViewObject() is referring to JboNameUtil.getInstNameFromDefName() which is using a static counter (int value) as suffix. The counter being an int value is reaching the upper limit and then turning out to negative when incremented and then leading to above exception.
In above stack trace the instance name is ViewDefMetadataManager4569314_-2147483397 , has a negative number at the end. So JboNameUtil.isNameValid(rsName) is returning false and the exception InvalidObjNameException is thrown at that point.
If this is the case, it appeared to be ADF bug.
Have you tested the application with application module pooling turned off? It might be an activation/passivation problem.
We use bean data control, no pooling configuration set.
Do you work in a cluster environment?
Yes but ADF is installed on a single server (Weblogic)
Do you see any more nested errors in the log?
This was the first error . After that we see same error whenever any of the UI is opened but with different VO name
Is it always three days before the error does up?
This is the first time uptime test is spawned to 3 days for this release
Does the application work after a refers or new login?
No, on new login , we see same error whenever any of the UIs is opened but with different VO name with -ve number at the end
Which operating system does the server run on? How much memory is installed?
Windows server 2008 , 16GB
Was there a high cpu usage at the time of the error?
We are testing it using load runner and multiple users

Illustrator CS6 Workspace Stops Working within a day or 2

Hi,
I'm starting to get very aggravated with Illustrator CS6 (Mac) -- every day or 2, it stops working after opening 1 file. I clear the prefs, cache, etc. and it will work again for another day or 2.
It seems to be the Workspace I've created, but that's just a guess.
As of today, I won't create another workspace and see if that really is the issue -- everything was working well up until about a week ago and then nothing but problems -- and I have been using the same Workspace for at least a year.
Anyone else have any other suggestions?
Oh, and I've also re-installed Illustrator CS6, which didn't help.
Many thanks for any and all suggestions!
- B

Thanks for replying, Scott.
1) File > Open = nothing happens. No file opens and no error message.
2) Dragging a fle to the AI icon = same as above.
3) Files are local.
4) I haven't tried booting into Safe Mode because that would mean I'd have to work in Safe Mode for days on end. This weird problem occurs either same day or, when using Essentials now, 5 days later. It would be impossible to get any work done in Safe Mode.
5) I'm logged in as admin and will certainly try logging out the next time it happens.
I really don't want to trash my prefs every day or clear the cache so frequently -- it will take me three times as long to work on any files as you can hopefully appreciate.
I also tried removing the internet connection which seemed to work as well, or it was a coincidence -- I am a fully registered customer and have been since Aldus! I'll have to try it again the next time. But again, doing this every time I need to work on files is going to get old very quickly.
- B

Adobe Acrobat x (as a component of the CS6 web premium package) has stopped working after 30 days

Acrobat x (as a component of design and web premiun CS6) has stopped working30 days after installation. I am not running a trial version of CS6 - I have a valid licensed copy.
What is going on?

More details
The software Design and Web Premium CS6 was purchased / installed / and activated just over 30 days ago
All components worked fine after install
30 days after install Acrobat X just stopped working - it will not startup - no error message seen - just does not starup (not even the hour glass). All other components still work fine.
Beta CS6 Software and prerelease CS6 Software had previously been deactivated and uninstalled prior to install.
System is 64 bit Windows 7, CS6 64 bit - 8GB RAM, Duo Core 3GHZ Intel, AMD 6870 1GB GPU.
Google the same issue and you'll find there are numerous people who have the same problem - current recommendation from Adobe is to deactivate and activate again. This sounds like another 30 day workaround
IvanG

Touch gestures feature stopped working/disappeared two days ago

I use Photoshop CC on a Surface Pro, and actively use touch gestures experimental feature as part of my workflow. Two days ago, the feature all of the sudden stopped working. I went into Settings, and it's no longer even listed under experimental settings, only the screen scaling and the printing features, two instead of the three that should be there.
Is this something that went away with a recent update (I hope not!), or am I dealing with another issue? How do I get it back? This is seriously impairing my workflow.
Thanks for any help!

Seili010 - Adobe has mentioned that the Touch features are now part of the base Photoshop CC 2014 so no need to turn them on.
HOWEVER
I am running the same setup on my Surface Pro 2 (Win 8.1) and my touch features have stopped working as well. I also have a Surface Pro 1 (Win 8.1) that my backup copy of Photoshop CC 2014 is installed on and the touch features work fine.

Email on my iphone 3 stops working almost every day.

My email stops working on my iphone 3 almost every day, and I have to reset the passwords, power on and off. Then it works again. Any suggestions?

Then you didn't read it carefully enough. Here is the applicable part of that page:
If you're running software update 1.1.3, please note that tapping the 'Gmail' button will automatically configure Gmail IMAP. Here's how to set up POP:
Tap Mail from your iPhone's Home screen.
Tap Other.
Select POP from the tab menu.
Enter your name, email address, and password in the appropriate fields. The Address field should be your full email address ([email protected]). Google Apps users, enter your full address in the format 'username@your_domain.com.'
Under Incoming Mail Server, fill in the Host Name field as 'pop.gmail.com.' Google Apps users, enter the server names provided, don't add your domain name in this step.
Under Outgoing Mail Server (SMTP), fill in the Host Name field as 'smtp.gmail.com.'
Tap Save. Now you're done!
If you notice that POP access isn't working properly, please ensure that all your settings are correct by following these instructions:
From the Home menu, tap Settings.
Select your Gmail address.
Scroll to the bottom of the page and tap Advanced.
Ensure that your settings are as follows:
Incoming Uses SSL: ON
Outgoing Uses SSL: ON
Authentication: Password
If you're accessing your Gmail from multiple POP clients, we recommend setting Use Recent Mode to ON.

Toshiba-Satellite Laptop Model C655-55225 stopped working after 90 days

I purchased a Toshiba - Satellite Laptop on 9/30/2011, it completely stopped working on 1/5/12. The laptop was not even used until 12/25/11, as it was a Christmas present for my husband. I called Customer Service at Best Buy because Toshiba Customer Service has been of no help, only to be told to call Toshiba. When I called Toshiba the first time they had us run some diagnostics on the laptop, which did not help at all. The computer will not even power up. Please keep in mind this laptop was gently used and well taken care of for the two weeks it was in use. There were no bumps, drops, virus or spills. I have spent a small fortune on products at Best Buy this holiday season and this is how they treat their customers? They offered no suggestions or help at all with a product they sold or offered to intercede with Toshiba. I can tell you with all certainty I will never buy another Toshiba product nor darken a BestBuy entryway. The customer service is equally awful with both companies.

Did they give you any other reason why they wouldn't send it out? It is a pretty common procedure to send it out under manufacturers warranty and I am surprised they would shoot you down. Did you talk to geeksquad or just customer service?
Crystal
Superuser
Forum Guidelines | Terms & Conditions | Community Guidelines | What is a Superuser?
*Remember to mark your questions solved and click the star to give kudos to show your thanks!*
While I used to be a Best Buy Employee, I no longer have any affiliation with Best Buy.
My opinions do not in any way shape or form represent Best Buy's Official decisions.

Network connection stops working after 3 days

My Mini is never switched off, but is often put to sleep. After near-faultless operation since new, it has recently (possibly coinciding with the upgrade to 10.4.10) started having a recurring networking issue.
After a small number of days, the network connection becomes unusable - neither Safari or Mail will work. Strangely other tools appear OK (e.g. traceroute www.whereiwork.com worked fine). Rebooting always temporarily fixes the issue.
The time interval may vary, but on this most recent occassion I checked the uptime before rebooting, and it was just 3 days.
Next time it occurs, what can I do to identify the cause of the problem?

Well, just under 4 days since the last reboot and it's done the same again...
It seems it's not entirely failed, but certainly doesn't work well enough to be useful.
e.g. if I start a ChickenOfTheVNC session to another machine on the LAN it appears to make a successful connection and creates a window of the right size but never fills it in. The server machine agrees that a connection has been made, but disconnects the client after a long-ish timeout.
Some other semi-random things I've tried:
/etc/resolv.conf has an entry in it referring to my router.
ifconfig en0 down
ifconfig en0 up
...makes no difference
Unplugging, then replugging the Cat5 makes no difference.
Rebooting the router makes no difference.
Not knowing enough about the inner workings of OS X, I'm going to have to resort to a machine reboot again. If anybody has any bright ideas for debugging this, it's due to go again sometime on Saturday afternoon.
(The procedure for "rolling back to .9" seems more disruptive than the problem itself, for now at least...)

A new phone which stopped working on 10th day itse...

Hi,
I bought a new Nokia 3250 phone on June 1, 2006. Within a week, it started giving problem regarding Network.
I submitted it for repair to authorized service center. I submitted it Brighpoint (on Hosur Road, Bangalore). Job No : BAN0089491. They took about a month to repair it. After I got it back, within a day it again started giving problems. I submitted the phone to then again. Job No : BAN0008452. Now they say we can not give end date for repair!!!
I called Nokia Care center - 30303838 on 30th Aug. They called back on 4th to tell me that my phone will be repaired by 12th sep. 12th Sep has come and gone. Service center still says that they do not know when will my phone get repaired. I talked at 30303838 again. They said that they can not do anything else then forwarding my complaint to concerned department. They promised that Ill get a call back in 24 hrs. I did not.
What should I do? Should I buy a new phone as the phone which I bought does not work at all!!!??
Does this also mean that if I buy a product and if it starts giving problems right away, it becomes headache of customer to keep on contacting service centers to the product repaired?? Is the liability of the company limited only to provide repair?

I'll try the .inx route. That's a good suggestion, thanks.
Yes, I do have 'Include Book Documents (bookName)' ticked and it is showing the correct book name. Definitely worth checking for the obvious mistake
[edited to add]
Ixnay on the .inx, eh?*
*That is to say: the InDesign Interchange format export-import tango did not help.

Mail sending stops working after a day

I have a strange behaviour with my email accounts. I noticed the problem first when I updated to the new 2.0 software. After restoring the phone, I set up my two email accounts (one MobileMe and one "other" from my university). Both receiving and sending from the two accounts works perfectly. After usually a day or so, emails suddenly won't send anymore. When I hit "send", it says "Sending..." on the bottom of the screen but nothing happens anymore.
I can get rid of this "blocking" email by turning off the phone, but that doesn't solve the problem. The next email I try to send again stalls and does not go out. The only way of fixing it is a full Restore and setting it up as a new phone (not using any previous backups).
Does anyone here have the same problem? I read about many users who get error messages when they try to send emails, but this seems to be a different problem. It is also unrelated to the account settings, since I tried it with two different mail accounts.
Any help is appreciated!

Yep - I got this yesterday, and twice again today ...
yesterday, I dropped a line to my ISP (using web-mail from our iMac), and later, with no word from them, I found I could send e-mails again ... no idea whether they did anything or not, but from a previous thread somewhere else on Discussions, I'd heard that ISPs have various automated ways to deal with spams & viruses & the like, and that sometimes individuals get caught up in this & get blocked (and that ISP tech' help generally don't see this, blame the customer's set-up in some way, and so don't resolve ... )
then, today, when it happened again, instead I went straight to Settings, Mail ... , Account ... and found the Outgoing Mail Server / Advanced / Server Port number had changed from what it had been yesterday (after editing it, and backing out, I could send again)
and when it happened yet again, I did the same & found the Incoming Mail Server Password had disappeared (typed it in, backed-out, and ... still couldn't send, so repeated the excercise & this time it worked - my typing or what, no idea)
HTH - no idea if it's a bug in Mail or the OS (we're on 2.0.2), just coincidence, or ... whatever !!

ToC stopped working on deadline day

Similar Messages

Maybe you are looking for