Too much red after upgrade!

I am not sure if after updating either to Panther or Tiger or from iPhoto 4 to 5 all the photos in my iPhoto collection had an overly red tint! All photos taken after that look normal. I have not printed any of those photos so I can't tell if they come out in print that way. I thought at the time a future update would fix this problem. But till today I am stuck with many many photos that used to be perfect all have a red looks to them! Since I never checked up on this I don't know if this was something other people had? I would appreciate any suggestions on this very much. Thank you for your reply.
Walter

Walter,
You will have much better luck with the post you have in iPhoto 5 -- where the color management and color profile issues are being discussed near your topic.
If you edited those older pictures you can try one thing. pick one and see if you can revert to original. See how the original looks.
Peter

Similar Messages

Too much space after form

There is too much space after the form:
http://zooop.net/birch_center/
I can control the space by adding a height tag in this tag:
<iframe src="
http://www.birchcenter.com/OpenNewsletter/includethis.php"
frameborder="0" width="170" scrolling=no style="border:0px;
font:Verdana, Arial, Helvetica, sans-serif;
color:#666666"></iframe>
But when users enlarge their text either through their OS or
their browser, the "Subscribe" buttons sinks behind the text after
it, and is not functionlal.
Does anyone know why there is so much space after the form
and how I could get rid of it?
Thanks very much,
Emilie

> Does anyone know why there is so much space after the
form and how I could
> get
> rid of it?
Many HTML tags have inherent margins, and <form> is one
of them. Use CSS to
control it -
form { margin:0; padding:0; }
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"zzzeeep" <[email protected]> wrote in
message
news:f0900b$h4f$[email protected]..
> There is too much space after the form:
>
>
http://zooop.net/birch_center/
>
> I can control the space by adding a height tag in this
tag:
>
> <iframe src="
http://www.birchcenter.com/OpenNewsletter/includethis.php"
> frameborder="0" width="170" scrolling=no
style="border:0px; font:Verdana,
> Arial, Helvetica, sans-serif;
color:#666666"></iframe>
>
> But when users enlarge their text either through their
OS or their
> browser,
> the "Subscribe" buttons sinks behind the text after it,
and is not
> functionlal.
>
> Does anyone know why there is so much space after the
form and how I could
> get
> rid of it?
>
> Thanks very much,
> Emilie
>

My ipod touch getting much slower after upgrade to ISO 5.1.1

my ipod touch getting much slower after upgrade to ISO 5.1.1
could it be downgrade? or how to solve this problem.....

I checked settings-->general-->about-->diagnostics & usage --> diagoostics & usage data, finding that almost every time I use the ipod touch, it sufferred the low memory issue after upgrading to ISO 5.1.1
will ISO 6 help? or will it get the ipod slower even than ISO5.1.1.1?

Too much red when printing photo on e-All-in-One-C310. Color profile needed.

Hi.
I just bought e-All-in-One-C310 and tried to print some photos - every time there is too much red color. Inks (cartridge) are HP original, paper is also from HP (Advance HP photo paper). OS - Windows 7.
It seems that I need a color profile but I can't find one on HP web-site. Can anyone help me?
Thank you in advance.
Ugine.

Hi , I see by your post that the copies are coming out blank and the black is printing in gray. I will certainly do my best to help you. Please try the steps in these documents to see if it will help resolve this issue. Disregard the titles. Fixing Print Quality Problems for the HP Photosmart Premium Fax All-in-One Printer Series (C410a, C410b, C410c, C410d, C410e). An 'Incompatible Cartridge' or 'Ink Cartridge Problem' Message Displays for HP Photosmart Premium Fax e-All-in-One Printer Series (C410). HP Inkjet Printers - 'Ox...' or 'C2...' Error Code Displays. I have also provided some steps to resolve issues when trying to print from the Mac. Repair the Disk Permissions on the Mac:Close all applications.On the Apple menu bar, click Go, click Applications and then click Utilities.Double-click Disk Utility.Highlight your hard drive/partition on the left.Click Verify and then Repair Disk Permissions. Restart the computer.. Reset the Printing System: Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol. Click the Apple icon and then click System Preferences.Click Printers & Scanners.Right-click (or Ctrl +click) in the left white side panel, then click Reset printing system.Click OK to confirm the reset.Type the correct Name and Password.Click OK to reset the printing system.Then click the + sign to add the driver, highlight the printer.Then click on the Add button. Are you using Genuine HP Cartridges?
What are the ink levels?Let me know the results of the Print Quality Diagnostic Report? If you appreciate my efforts, please click the 'Thumbs up' button below. If there is anything else I can help you with, just let me know. Thank You.

External HD claims to be drawing too much power, after 2 months of working

I have a 2.5" external HD enclosure from Mad Dog Multimedia that uses two USB connections, one for data and one for power. It's been working fine with my new Macbook Pro since I bought it several months ago, and continues to work fine with other comptuers. Last night I got a message that it was drawing too much power and the ports would be shut off. I unplugged and replugged it, and it continued to work all evening. This morning however, no matter what I do, it continues to tell me that its drawing too much power. This is baffling to me, because it has worked for the last few months, and still works on other computers, leading me to believe that something is wrong with my USB ports. Unfortunately I don't have much in the way of other USB devices I can use to test this hypothesis. Has anyone else encountered similar problems, and have you been able to resolve them successfully?

In the event you haven't done this already, shut down the computer and remove the external drive. Wait at least one or two minutes. Restart the computer then reconnect the external drive. See if your problem is resolved.
Try repairing the hard drive and permissions:
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation complete. I also suggest you run Repair Disk on the external drive as well while you still have DU running. Now quit DU and return to the installer. Restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger, and 4.1 for Leopard) and/or TechTool Pro (4.6.1 for Leopard) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
If the above does not work, it is possible there's a problem with your OS X installation. It's difficult to know what that may be so you will need to experiment. First, restart the computer in safe mode. If this doesn't result in the problem ceasing, then try creating a new user account. Log out of your account and log into the new one. If this doesn't result in the problem going away, then more extreme measures are needed: reinstalling OS X. You might give this a try:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

Firefox using too much memory after an update

Since I updated to firefox 14, it started using WAY too much memory, which is 2GB+. This has never happened to me, and none of the solutions on the website have helped me. It starts off normally at about 80 MBs and then starts growing and growing. I have to restart firefox about twice an hour or more.

I also recently downgraded my flash player to a recommended version on this website since the latest version crashes too much, that was about the time when I updated firefox, not sure if that might be why this is happening
EDIT: Updated to latest version of flash again. Memory usage is still high

Max volume much quieter after upgrading to Mountain Lion.

After upgrading to Mountain Lion, the volume was noticably quieter. Setting the volume to max gave the sound equivalent of 3/4 full compared to Lion. Is anyone else experienceing this problem? Is there a way to fix it?

I am having the same problem! Any fix for it yet?

Slow system and too many details after upgrading to OS/Lion

This MacBook Pro is my right hand, I was doing so great with Snow Leopard, Now everything takes twice longer. I cleaned up, reseted, reinstalled softwares, etc. same.
Too many details that doesn't work correctly.
-Safari constantly needs to be loading. Some times Firefox.
The track pad cant keep open a display box with a long list, once you try to scroll down.
-Preview, i used this app a lot, safe me time, DUPLICATE? instead of SAVE, i don't see the purpose. After editing images and safe them, gamma, color patterns and light appear distortion.
-iTunes volume doesn't comeback after using Skype or another app, remains low.
-Airport takes a bit longer to find a local network.
-There is not an extra space for the left and right scroll bottom on the finder window, sometimes this one disappear but mostly remains which makes it pretty tricky to open the last file at the bottom of the list. because the scroller is on front.
-External Drives, takes longer to connect or disconnect them.
Suggestions before i reinstall Snow Leopard.

guizz,
it sounds like you have come across the mother of all problems but i would like to help as much as i can.
first of all, i noticed that it took a few days after installing lion before my system was back to the full stride it had while running snow leopard give it some time and a few updates and lion should speed up because components such as ram take time to adjust.
the duplicate thing in preview is a new thing that came out with versions, one of the many new features in lion. i think it takes the place of the SAVE AS... command and you should still be able to save using the old command-s keystroke however part of lion includes an autosave feature so you really never have to worry about saving your work.
i personally cannot speak for safari or firefox even though i have both because i use google chrome as my web browser you can always give that a try.
in the system preferences under the general settings option you can change how the scroll bar is displayed on the screen.
i would suggest searching for other people who have had similar problems with itunes to try and find an answer
as for everything else your system may just need time to adjust to lion
good luck hope this helped a little

Too Much Red/Magenta in Pictures

I am using:
Adobe Pro Extended Version 9.3.2 (in default mode, out-of-the-box mode)
Vista 32 bit
Dell desktop PC with lots of ram
NVidia GEForce 8800 GTX
I am reviewing a draft copy of a friend's PDF e-book. In his e-book are lots of pictures, of which many are strikingly too red or magenta in color.
Is there some setting that I should set so that my software properly picks up the color space and applies it? Is there some other setting that I should be aware of?
I am not sure what software or settings he used to create his PDF e-book. I will ask. He did, mention, however that the pictures look fine on his and his friend's pcs. So whatever the problem might be, I'd like to find out so that, when the e-book is released, others don't suffer the same image degradation problem.
Again, are there switches or setting or general advice that I should be aware of?
Thank you for your advice.

Much to my surprise, I had altered the out-of-the-box settings. In Preferences | Color Management, I had set ProPhoto RGB rather than the traditional sRGB.
I see other documents and the pictures look fine. But in the document that I am reviewing, the pictures look much too red when using ProPhoto RGB. I suspect, though I am not sure, is that some documents have their pictures with the color space profile embedded in each picture. In the document that I am reviewing, I am *guessing* that the color space is not embedded in each picture.

Imported Photo colors are purplish/pink/red after upgrade to 3.4

I've recently upgraded to LR 3.4 on Windows. After the upgrade, all photos that I view (new photos and photos taken prior to the upgrade) appear to have a purplish/pink/red tint. If I export the RAW file to a JPG and view it outside of LR, it appears normal. The photos appear like this in at least the library and develop windows. Why is this and how do I fix it? A search of the LR FAQ's didn't yield anything useful.
I didn't change any develop settings, I didn't change any import options, and I didn't apply any auto filters (that I know of). I've tried upgrading to 3.4.1 to fix this issue, but that didn't solve it.
Please note I'm a relative novice with both lightroom and color management, so please don't assume I have prior knowledge when suggesting a fix for this issue!
Thank you in advance,
Wabi

I got it working myself
Maybe others are dealing with the same problem, so here is what I did:
At Corel's support website I found no information about similar problems, just a description how to set back the current workspace to factory defaults.
This is done by clicking at the program icon to start the software and then holding down the shift key immediately after clicking. Then a message box opens asking for confirmation.
Although I had done some custom settings to the workspace I had nothing to lose and gave it a try. Voila
Not sure what the reason behind is; I think that there are old configuration files existing or settings got mixed up for whatever reason.
Before I did so, I renamed the matching *.plist file at my user's library/preferences folder to *.plist.old - but this did not bring any improvement (in fact, even no new plist file became created).

Kernel_task taking up too much CPU after Mavericks update.

Hello!
I am running a Mac Book Pro 2.66 Ghz Intel Core i7. 8gb 1067MHz DDR3. OS X 10.9.1
Having just installed Mavericks, I've had a bunch of problems. One of them has been a new thing called kernel_task which can take up most my CPU from time to time.
I read a previous discussion and it seemed that some audio software had been the issue for a few people. However I do not recall installing or uninstalling any audio software. @linc_davis kindly offered up a diagnostics check, am hoping he or some other kind soul can make sense of the following terminal dumps please so I can find out which app is bringing me down!
Looking at the below, I certainly havent used or wanted the BB Rim software for a long time. Will try and download that and uninstall it again. Little snitch I know and use. and same with the mouse driver Evoluent, backblaze, peer guardian, macKeeper, and google. The others I don't recognise.
Thank you very much!
com.rim.driver.BlackBerryUSBDriverInt (0.0.74)
at.obdev.nke.LittleSnitch (4052)
com.avatron.AVExVideo (1.7)
com.nomadesk.driver.VnodeWatcher (5.0.8fc1)
com.avatron.AVExFramebuffer (1.7)
com.regularrateandrhythm.driver.RowmoteIREmu (1.0)
com.evoluent.driver.VerticalMouseDriver (1.0.2f1)
com.backblaze.bzbmenu
xxx.qnation.PeerGuardian.kextload
com.zeobit.MacKeeper.AntiVirus
com.trusteer.rooks.rooksd
com.rim.BBDaemon
com.regularrateandrhythm.rowmotehelperaide
com.google.keystone.daemon
com.backblaze.bzserv
com.adobe.versioncueCS4
com.adobe.SwitchBoard
com.adobe.fpsaud
at.obdev.littlesnitchd
com.Growl.GrowlHelperApp.56528
com.google.Chrome.38400
jp.co.canon.cijscannerregister.61632
com.wacom.TabletDriver.58112
com.wacom.Consumer_TouchDriver.57936
com.regularrateandrhythm.rowmotehelper.30128
xxx.qnation.pplogger.58640
xxx.qnation.pploader.58464
com.blacktree.Quicksilver.29952
com.wacom.pentablet
com.trusteer.rapport.rapportd
com.rim.BBLaunchAgent
com.rim.RimAlbumArtDaemon
com.hp.help.tocgenerator
com.google.keystone.system.agent
com.evoluent.agent
com.adobe.CS4ServiceManager
at.obdev.LittleSnitchUIAgent
com.zeobit.MacKeeper.Helper
com.spotify.webhelper
com.backblaze.bzbmenu
com.adobe.ARM.df0ab5bbe6f698196fcc21e3c1e66dcb758bd911f4d637272d9d8109
com.adobe.AAM.Scheduler-1.0
/Library/Components:
/Library/Extensions:
ATTOCelerityFC8.kext
ATTOExpressSASHBA2.kext
ATTOExpressSASRAID2.kext
ArcMSR.kext
CalDigitHDProDrv.kext
HighPointIOP.kext
HighPointRR.kext
LittleSnitch.kext
PeerGuardian.kext
PromiseSTEX.kext
SoftRAID.kext
/Library/Frameworks:
AEProfiling.framework
AERegistration.framework
Adobe AIR.framework
AudioMixEngine.framework
DivX Toolkit.framework
MacFUSE.framework
Mono.framework
NyxAudioAnalysis.framework
OSXFUSE.framework
PluginManager.framework
RIM_VSP.framework
RimBlackBerryUSB.framework
Snapfish.framework
WacomMultiTouch.framework
iLifeFaceRecognition.framework
iLifeKit.framework
iLifePageLayout.framework
iLifeSQLAccess.framework
iLifeSlideshow.framework
iTunesLibrary.framework
/Library/Input Methods:
/Library/InputManagers:
Ecamm
/Library/Internet Plug-Ins:
AdobePDFViewer.plugin
Default Browser.plugin
DivXBrowserPlugin.plugin
EPPEX Plugin.plugin
Flash Player.plugin
JavaAppletPlugin.plugin
OVSHelper.plugin
OfficeLiveBrowserPlugin.plugin
Quartz Composer.webplugin
QuickTime Plugin.plugin
WacomNetscape.plugin
WacomTabletPlugin.plugin
flashplayer.xpt
iPhotoPhotocast.plugin
nsIQTScriptablePlugin.xpt
/Library/Internet Plug-Ins (Disabled):
Flash Player.plugin
/Library/Keyboard Layouts:
/Library/LaunchAgents:
at.obdev.LittleSnitchUIAgent.plist
com.adobe.AAM.Updater-1.0.plist
com.adobe.CS4ServiceManager.plist
com.evoluent.agent.plist
com.google.keystone.agent.plist
com.hp.help.tocgenerator.plist
com.rim.BBAlbumArtCacher.plist
com.rim.BBLaunchAgent.plist
com.trusteer.rapport.rapportd.plist
com.wacom.pentablet.plist
/Library/LaunchDaemons:
at.obdev.littlesnitchd.plist
com.adobe.SwitchBoard.plist
com.adobe.fpsaud.plist
com.adobe.versioncueCS4.plist
com.backblaze.bzserv.plist
com.google.keystone.daemon.plist
com.regularrateandrhythm.rowmotehelperaide.plist
com.rim.BBDaemon.plist
com.trusteer.rooks.rooksd.plist
com.zeobit.MacKeeper.AntiVirus.plist
xxx.qnation.PeerGuardian.kextload.plist
/Library/PreferencePanes:
BackblazeBackup.prefPane
DivX.prefPane
Evoluent.prefPane
Flash Player.prefPane
Growl.prefPane
OSXFUSE.prefPane
PenTablet.prefPane
RapportPreferences.prefPane
VersionCueCS4.prefPane
/Library/PrivilegedHelperTools:
com.regularrateandrhythm.rowmotehelperaide
com.regularrateandrhythm.rowmotehelperaide-kext
/Library/QuickLook:
GBQLGenerator.qlgenerator
iBooksAuthor.qlgenerator
iWork.qlgenerator
/Library/QuickTime:
AppleIntermediateCodec.component
AppleMPEG2Codec.component
/Library/QuickTime 19-36-32:
AC3 Codec.component
AppleIntermediateCodec.component
AppleMPEG2Codec.component
DivX Decoder.component
DivX Encoder.component
SoundboothScoreCodec.component
/Library/ScriptingAdditions:
Adobe Unit Types.osax
/Library/Spotlight:
GBSpotlightImporter.mdimporter
LogicPro.mdimporter
Microsoft Office.mdimporter
iBooksAuthor.mdimporter
iWork.mdimporter
/Library/StartupItems:
/etc/mach_init.d:
/etc/mach_init_per_login_session.d:
/etc/mach_init_per_user.d:
Library/Address Book Plug-Ins:
SkypeABDialer.bundle
SkypeABSMS.bundle

Start by following these instructions to uninstall MacKeeper. They have been tested with the most recent version of MacKeeper (v 2.8). Earlier versions than the one released in 2012 require more extensive work to uninstall all its components.
Then, uninstall Trusteer Rapport. Your Mac cannot operate properly with it installed.
The fastest way to take an exquisitely designed and painstakingly engineered Mac and make it run like a steaming pile of dung is to install and use "cleaning" or "security" products like MacKeeper. Never install such junk on a Mac.
If you used MacKeeper to encrypt any files or folders, use MacKeeper to un-encrypt them first.
Quit the MacKeeper app if it is running.
Open your Applications folder: Using the Finder's Go menu, select Applications.
Drag the MacKeeper icon from your Applications folder (not the Dock) to the Trash.
You will be asked to authenticate (twice):
You do not need to provide a reason for uninstalling it:
Just click the Uninstall MacKeeper button. You will be asked to authenticate again.
After it uninstalls you may empty the Trash and restart your Mac. All that will remain is an inert log file that does nothing but occupy space on your hard disk.

Too much red in photos

Hello all,
I sometimes use iPhoto 08 and import my photos (which I have processed in Adobe Photoshop CS 3), and then send them to iDVD so that I can have a slideshow. I then add some music and then burn the disc to be played in a set-top dvd player on my TV.
The problem that I am having is that although my photos look great when I'm done processing them...it seems like iPhoto is adding red to a lot of them. My faces on people seem really red.
Is there something that is causing this?
Thanks,
Norm

Are you having trouble only with the photos you've edited with PS? If so how do you have PSCS3 setup to manage color? Here's how I've set it up:
Click to view full size
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There's now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

Battery running low much faster after upgrade

Ever since I upgraded the software, my battery life has seriously degraded. Is anyone else experiencing the same issue? And is there a solution? I've already turned off location services - which is upsetting because prior to the upgrade, I had it turned on and my battery did not run low this quickly.

Perhaps these suggestions will help:
http://www.apple.com/batteries/iphone.html
also
http://theweek.com/article/index/250098/ios-7-battery-life-6-simple-ways-to-keep -your-iphone-powered-up
http://www.tuaw.com/2013/09/18/how-to-stop-ios-7-from-destroying-your-iphones-ba ttery-life/
Regards.

HDB Name server red after upgrade

Hi Hana gurus
We did Hana box upgrade from Sp06 tp Sp7.4, process itself was ok - no error messages, but when system is ttrying to start itself then nothing happens. and i get error "process hdbnameserver HDB Nameserver not running"
Any ideas what to do? Luckily this is our sandbox, so no impact on prod environment

I upgraded today and had the same issue. I took following steps to fix my computer.
Boot into Recovery Partition (Hold Option Button while booting)
Open Terminal.
Type resetpassword
Select your hard drive
Select the user account (Administrator)
Enter a new password for the user
Reenter password
Save
Restart
Boot normally, Login as Adminstrator with the new password and add "Admin" permission to your account.
Restart
Everything should be working as expected

Too many errors after upgrading the firmware to 1.0.3.10 on Cisco RV180W wireless router

My company purchased one Cisco RV180W wireless router few days ago and it worked normal with default firmware version of 1.0.0.30. Today I upgraded the firmware to version 1.0.3.10, the users can still access this router via wired and wireless devices, but on the dashboard I observed two major problems, one is the CPU utilization always shows 100%, another is the more and more errors appearing, on the Syslog Summary panel "Error" log has been up to 625 and is still increasing, there is one message repeatedly displaying in the log, see in below:
Wed Nov 13 13:55:25 2013(GMT+0800) [rv180w][System][PLATFORM] /pfrm2.0/bin/bwLimitConfig /tmp/system.db 18 dot11STA 100 failed. status=-1
Who can tell me what does this error message mean and how to elinate this error message ? also how to deal with 100% CPU utilization ?
Thanks.

Hello,
i have been looking at different VPN routers over the last few weeks and i was very close to buying the RV180W, but then i stumbled across many posts reffering to firmware issues, one issue is that the cpu sits at 100% useage, i just wondered if this is a bug in GUI or is the CPU actually max'd out? has anyone had any resolution into this?
also the firmware on the emulator is a newer version than is listed on the support page, does anyone know when 1.0.3.14 will be released for download?
when i buy a new product i like to ensure that the system is fully upto date before its put into use but i obviously dont want to add any performance issues from the ofset due to the CPU useage.
i also have a could of questions if anyone can help
the Ipsec VPN, will this work with the Built-in VPN client for apple devices? (New IOS7), i am unable to find a quickvpn application for apple IOS.
is the site-to-site IPSec VPN also compatible with the Cisco Wvrs4400n router?
thanks in advance.

Too much red after upgrade!

Similar Messages

Maybe you are looking for