ToolTip for each node of the Tree in JTreeTable?

Hello! I have the problem that a ToolTip i have set in the TreeCellRenderer would not been displayed! Only one ToolTip will pop up over the JTreeTable with the ToolTipText that was set in the first CellRenderer. Does everybody have an idea?

OK! Its done! The solution does not help exact, but it gives my the way! With the coordinates of the MouseEvent I can get the Value of the current table row and set the ToolTip text new. Teh ToolTipManager automatically repaints the ToolTip whit the new text and position.

Similar Messages

JTree- seperate tooltip for each node

hi,
i would like to have different tooltips for different nodes. in all tutorials they have given the method of assinging tooltip in a general class i.e. setting a tooltip for all leaf nodes etc.. But i would like to have seperate tooltip for each node.
thanx

hi,
Doing both of the above tasks will lead to have a tooltip same for all nodes. But i need all the toltips to be different for different leafs.
However i solved that problem using mouseListeners and getPath() method..
Now i have another problem. when i move my mouse over any leaf node(not necessarily selecting just on moving over the text) i would like to change the color of the text of that particular node to another color. If i use renderer to do this then it may change the color of all the nodes.
how it could be done for only a particular node and not for all. Aren't there any renderers for nodes.
thanx

How to let the user define the colors for each plots in the graph (I use LabVIEW 7)?

How to let the user define the colors for each plots in the graph (I
use LabVIEW 7)?

Hi,
Take a look at this example, it uses property nodes to select tha
active plot and then changes the color of that plot.
If you want to make the number of plots dynamic you could use a for
loop and an array of color boxes.
I hope this helps.
Regards,
Juan Carlos
N.I.
Attachments:
Changing_plot_color.vi ‏38 KB

Create single message in receiving side for each record in the sender file

Dear Experts,
My Interface is from FILE to MQ (JMS)..
I have a specific requirement in my project, I have multiple files in sender directory ( /tmp)
Ex: FILE_20090202.TXT
FILE_20090203.TXT
FILE_20090204.TXT
FILE_20090205.TXT
And each file has couple of records just shown below:
ABC   123     WER    SER
BCD   345     WEDR    SER
CDE   567     GHTE   DDGG u2026. Etc..
I have to process all the files at a time ( may be I can use file masking by FILE*.txt) , one message has to be created in MQ for each record of the file..
Ex:
Message 1: ABC   123     WER    SER
Message 2: BCD   345     WEDR    SER
Message 3: CDE   567     GHTE   DDGG
Valuable inputs are appiciated !!
Cheers,
Kumar

As already suggested, multi-mapping can be used
You need to set target root node occurrence to unbounded and map root node accordingly
you will have to use enhanced interface determinaion
For detail refer:
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible

Displaying the entire text of a tree node when the tree isn�t wide enough

Hi,
I have a JTree displayed in a JScrollPane, so there is a chance that some of the tree data may be hidden if the tree's width is insufficient, so when the user moves the cursor over a tree node whose text is not completely visible (cut off by the right edge of the scroll pane and/or window), a tooltip is displayed to show the entire node text. So far so good!
If the user double click a node in the tree a new window is supposed to be opened. This works fine if the tooltip hasn�t been displayed jet, but if it has then the user has to click 3 times to open the window.
The first time to remove the tooltip and the next 2 opens the window.
How can I awoid this?
Thanks!!!!
:-)Lisa

Any ideas, please?

How can we call a jar files(seperate projects jars) to each link of the tre

how can we call a jar OR WAR files(seperate projects jars OR War) to each link of the tree.

i want have home page that have this menu
========================
-- Sale
--- Customer
--- Reader
-- Energy
--- Calc
-- Service
--- Chnage Name
--- Change Code
=======================
For example
--- Change Name
---- Page Reister
---- Page Confirm
---- Page Anoc
---- Page Save
======================
i want user to access to every page From Each Case(Change Name) .
i create for change name one project in my fushion web app and for other case
How to I Can Call Page register From change name in Menu of The home page ????
Edited by: user13151366 on Feb 4, 2013 4:44 AM

XPath expression for each node name

<DATABASE>
   <TITLE>
      <LANGUAGES>SGML<LANGUAGES>
   <TITLE>
</DATABASE>Is there a direct way of retrieving xpath expression for each node name other than iterating through each node and identifying the parent node.
Ex:
DATABASE
DATABASE/TITLE
DATABASE/TITLE/LANGUAGES

If you set an element ID using the DOM parser you can then look it up using the ID.
private void setElementIDNode(String tag, String IDAttribute){
        NodeList nodes = doc.getElementsByTagNameNS(docNS, tag);
        for (int i = 0; i < nodes.getLength(); i++){
            Element node = (Element)nodes.item(i);
            node.setIdAttribute(IDAttribute, true);
Element e = doc.getElementById(elementID);But at some point you still have to iterate through the document. I believe XML Pull Parsers are a little different but I don't have experience with them.

Add a button after each node of my tree

Hi !
I would like to add a button after each node of my tree. I think I have to create a new TreeCelleRenderer but I really don't know how to make it. Can someone help me and give me an idea (or an example !) about the code.
When I click the button, I must know from which node the event comes.
thanks.
delph

Hi, how did you resolve the problem. Well it's long time from your posting, but maybe someone else can help me...
I'm creating similar JTree where's print and save buttons in some of the nodes. I created custom cell renderer which extends JPanel and holds images, text and the buttons inside it. Is it possible to link buttons' actionlisteners somehow to the nodes. I tried it customizing cell editor, but I can't get button events fired. I also tried to catch "button clicked" action using mouse listener in my tree and that worked somehow and can be used as quick and dirty solution. Still I want to do it better way.
-e

JTree - How to Expand all Nodes in the Tree

I have a tree that has one primary node, two sub-nodes, and multiple sub-sub-nodes under those. I want to expand (show) all these nodes in the tree when the tree first loads. I tried expandRow() but that only seems to expand one row at a time by entering a single integer for the row. Is there any way to expand all rows/nodes when loading the tree?

see
http://forum.java.sun.com/thread.jsp?forum=57&thread=148793

How to get multiple output formats for each execution of the report?

Hi,
Is it possible to get multiple output formats for each execution of the report? If so can you provide some details?
Thanks

In Reports 6i, Reports Distribution was introduced. This allows you to run the report once and output to a number of destinations with a different format. It also allows you to distribute individual sections within a report to different destinations in different formats.
The Destinations for a Report to distribute to are defined either in a distribution file and passed on the command line or inside of the report definition.
To add a destination to the the report definition, bring up the property palette against the report object and then select the "Distribution" property under the "Report" node. This will bring up a dialog that allows you to create a distribution list. You can then test this list by selecting "file->distribute" from the menu.
To run a report that is to be distributed through rwrun60, you need to add "distribute=yes" to the command line. It will pick up the destinations from the report definition. If you add "destination=<filename>" then it will pick up the destinations from the specified "<filename>" and ignore the destinations in the report definition.
Note: if "distribute=yes" is specified on the command line then the destype/desname/desformat parameters will be used to format the report (ie: which printer/display to use during formatting for sizing objects) but will be ignored when the report is sent to the destinations.

Set up Virtual IP and Private IP for each node in RAC installation

I am new to Oracle 10G RAC installation, based on the documentation, I need to assign a public IP, Virtual IP, private IP for each node, I know how to assign public IP for each node, I can assign the IP from the router, but I don't know how to assign the Virtual IP and private IP, since the private network is only connected by a switch, the switch is not able to assign IP to server, should I just go to the host file
%SystemRoot%\system32\drivers\etc\hosts
of each node to put IP in the file? what else should I do? I already read through the document from Oracle "Oracle Real Application Clusters, Quick Installation Guide for Oracle Database Standard Edition 10g Release 1 for window".

I am still keep thinking why each node need a virtual IP address? if each mode has a virtual IP, which IP address the client can be specified? I have multiple application servers work as clients.

Yone Tooltip for each item of select-list

Could an

To set the tooltip for each value selected from Drop Down list - means value is selected in drop down list and the mouse over on the field (i thought this way, if its not correct ignore the same.
For the above case check the selected drop down value on change event and set the desired text as tooltip.
For example
if(xfa.event.newText == "One")
this.assist.toolTip.value = "You Selected Choice " +xfa.event.newText;
Thanks,
Raghu.

FillBy always fills in the same row in data grid view. How to make it fill in a new row for each click of the Fillby Button? VB 2010 EXPRESS?

Hi there,
I am a beginner in Visual Basic Express 2010. I have a Point of Sale program that uses DataGridView to display records from an external microsoft access
database using the fillby query.
It works, but it repopulates the same row each time, but i want to be able to display multiple records at the same time, a new row should be filled for
each click of the fillby button.
also I want to be able to delete any records if the customer suddenly decides to not buy an item after it has already been entered.
so actually 2 questions here:
1. how to populate a new row for each click of the fillby button
2. how to delete records from data grid view after an item has been entered
Thanks
Vishwas

Hello,
The FillBy method loads data according to what the results are from the SELECT statement, so if there is one row then you get one row in the DataGridView, have two rows then two rows show up.
Some examples
Form load populates our dataset with all data as it was defined with a plain SELECT statement. Button1 loads via a query I created after the fact to filter on a column, the next button adds a new row to the existing data. When adding a new row it is appended
to the current data displayed and the primary key is a negative value but the new key is shown after pressing the save button on the BindingNavigator or there are other ways to get the new key by manually adding the row to the backend table bypassing the Adapter.
The following article with code shows this but does not address adapters.
Conceptually speaking the code in the second code block shows how to get the new key
Public Class Form1
Private Sub StudentsBindingNavigatorSaveItem_Click(
sender As Object, e As EventArgs) Handles StudentsBindingNavigatorSaveItem.Click
Me.Validate()
Me.StudentsBindingSource.EndEdit()
Me.TableAdapterManager.UpdateAll(Me.MyDataSet)
End Sub
Private Sub Form1_Load(sender As Object, e As EventArgs) Handles MyBase.Load
'TODO: This line of code loads data into the 'MyDataSet.Students' table. You can move, or remove it, as needed.
Me.StudentsTableAdapter.Fill(Me.MyDataSet.Students)
End Sub
Private Sub Button1_Click(sender As Object, e As EventArgs) Handles Button1.Click
Me.StudentsTableAdapter.FillBy(Me.MyDataSet.Students, ComboBox1.Text)
End Sub
Private Sub Button2_Click(sender As Object, e As EventArgs) Handles Button2.Click
Me.MyDataSet.Students.AddStudentsRow("Jane", "Adams", "Female")
End Sub
End Class
Get new key taken from
this article.
Public Function AddNewRow(ByVal sender As Customer, ByRef Identfier As Integer) As Boolean
Dim Success As Boolean = True
Try
Using cn As New OleDb.OleDbConnection With {.ConnectionString = Builder.ConnectionString}
Using cmd As New OleDb.OleDbCommand With {.Connection = cn}
cmd.CommandText = InsertStatement
cmd.Parameters.AddWithValue("@CompanyName", sender.CompanyName)
cmd.Parameters.AddWithValue("@ContactName", sender.ContactName)
cmd.Parameters.AddWithValue("@ContactTitle", sender.ContactTitle)
cn.Open()
cmd.ExecuteNonQuery()
cmd.CommandText = "Select @@Identity"
Identfier = CInt(cmd.ExecuteScalar)
End Using
End Using
Catch ex As Exception
Success = False
End Try
Return Success
End Function
In closing I have not given you a solution but hopefully given you some stuff/logic to assist with this issue, if not perhaps I missed what you want conceptually speaking.
Additional resources
http://msdn.microsoft.com/en-us/library/fxsa23t6.aspx
Please remember to mark the replies as answers if they help and unmark them if they provide no help, this will help others who are looking for solutions to the same or similar problem.

I have several recuring alarms set up on my calendar for each day of the week. In the past few weeks, an alarm will occasionaly notify me roughly 15 minutes to an hour and a half late. These daily alarms are identical and repeat every day.

I have several recuring alarms set up on iCal for each day of the week. In the past few weeks, an alarm will occasionaly notify me roughly 15 minutes to an hour and a half late. These daily alarms are identical and repeat every day and there seems to be no apparent pattern to why or when an alarm happens after the event is past.

I assume you meant iCal rather than iTunes? Yes, iCal the time zone is correct. The delayed alarms only happen sporadically. Since I posted this message, the problem stopped happening every day at the same time, but it still happens occasionally with no rhyme or reason as to when. It's gotten so that I can't depend on my iCal alarms anymore.

How to activate a different sub-report for each row in the data set as main report page breaks on each row of data in the main dataset

I am going to try asking this same question a different way as I have yet to find a working solution to my problem. I have a main report and then 8 sub reports. My main report has one data set and returns one row of data per account number. One
of the fields in the main data set is called AccountProf. My main report displays one page per Account number and then calls a different sub report based on that account's AccountProf value. The sub reports take in the account number as a parameter
and get multiple rows of data to display that accounts usage formatted differntly for each AccountProf (hence the 8 different sub report.
So far I can figure out how to do everything but setting the visibility property of each sub-reports when I have multiple accounts. If I use the following expression for the visibility property on each sub report, it makes all the applicable sub report
for all the accounts requested visible at once:
=IIF(Fields!AccountProf.Value= "USE_PLUS_DMD",False,True)
*The value in bold USE_PLUS_DMD is different for each sub report.
Here is a look at what the main report look like:
Here is the main reports data set:

Hi JasonDWilson77,
According to your description, there is a main report and 8 sub reports in the report, you want to set visibility of sub reports, if no value is passed to the parameter of sub report, the sub report will not be displayed. If that is the case, please refer
to the following steps:
1. Create a new parameter named NewAccountNumber, set its data type the same as @AccountNumber, select Allow multiple values, set Visibility to be hidden, then set all available values to default values.
2. Right-click the first sub report and open Subreport Properties dialog box, click Parameters in left pane, set name to AccountNumber, then click (fx) button, type the expression like below:
=Parameters! NewAccountNumber(0)
3. Click Visibility in left pane, select Show or hide based on an expression, then click (fx) button and type the expression like below:
=IIF(InStr(Join(Parameters! AccountNumber.Value), Parameters!NewAccountNumber.Value(0))>0 , false,true)
4. Modify parameter of other sub reports like step2.
5. Set visibility of other sub reports like step3.
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
If you have any feedback on our support, please click
here.
Wendy Fu
TechNet Community Support

ToolTip for each node of the Tree in JTreeTable?

Similar Messages

Maybe you are looking for