Total budget 0.00 EUR in order 12412100 is less than the cumulative bud

Dear Sir,
In t.code KO22 it gives error while saving amount in original budget field for 2008,
"The total budget 0.00 EUR in order 15210080 is less than the cumulative budget 2.16 EUR.
The cumulative budget is the total of the annual budgets."
Can you pls guide.
Thanks
Edited by: Mukherjee S on Mar 31, 2008 1:47 PM

You might have distirbuted the values (2.16 EUR) over years. In this case you need to enter the value in Overall Budget also.
Regards
Sreenivas

Similar Messages

PO is getting released even if the total amount is less than the last PO am

Purchase Order is getting released even if the total amount is less than the last PO amount. The release strategy is only working for the first Purchase Order and if the PO amount is greater than the last PO amount.
Please let me know how to correct this scenario (release strategy).
Regards,
Prishu

Hi,
Release strategy has nothing do with the previous PO amount. May be, Co-incidently the amount in previous PO which you are referring and the characteristics value maintained in the release strategy is same.
1) Please go in release strategy by the path mentioned below
IMG u2013 Material Management u2013 Purchasing u2013 Purchase Requisition u2013 Release Procedure u2013 Procedure with Classification u2013 Set Up Procedure with Classification
2) Then go to release strategy. Here the total available release strategies would be displayed. Double click the strategy which is getting reflected in the PO you want and go the classifiction tab. There you will get the PO value. Based on this characteristic value the respective release streategy gets refelected.
I hope this clarifies.
Regards
sachin

Required delivery date in sales order shoud not be less than the inhouse pd

Customer Requested Dates (CRD) entered in orders are often shorter than Product form wise lead time.
Logic to be configured in SAP : SAP should capture the CRD as per the lead time of Products or Date entered by sales persons (whichever is later).
Required delivery date in sales order shoud not be less than the inhouse production lead time.
Please help.
Regards

IMG - Sales and Distribution - Basic Functions - Availability Check and Transfer of Requirements - Availability Check - Availability Check with ATP Logic or Against Planning - Carry Out Control For Availability Check
Here select the combination of your Availability Check & Checking Rule.
Under Replenishment Lead TIme, you need to put a Tick Mark in the Check Box of "Check without RLT"
This will make sure that system considers either the Requested Delivery Date or actual Material Availability Date, which ever is earlier.
Hope this helps.
Thanks,
Jignesh Mehta
Edited by: Jignesh Mehta on Nov 9, 2011 12:18 PM
Edited by: Jignesh Mehta on Nov 9, 2011 12:23 PM

Disable Booking if Reservable Quantity is less than the Ordered Quantity

Hi Everyone,
How can we disable booking of sales order if the quantity reservable for an item is less than the quantity ordered in the sales order?
Best regards,
Paul

You need to Modify WorkFlow . You can do something like this.
1) Add a custom node between Book-Eligible and Book Node
2) Write your logic Inside the proc, which will get called from newly created custom node.

How order got transmitted even if quantity is less than the minimum

Hi All,
We have an issue where an order has been transmitted for 23 cases where minimum is 25. This order came through even if this order is for that part of the region that should not be able to tranmit orders if under min..
Being a technical guy, I am not able to understand the issue itself.
Doubts :
1. How an order is supposed to be transmitted ?
2. What is this minimum below which an order should not be transmitted? Where this minimum value is defined ? Is it specific to customer or specific to area or specific to plant?
In which table or through T-Code I can check this minimum ....
Can you please guide how to explore the above....
Thanks in advance.
Regards,
Sanjeet

Hi Sanjeet
You can maintain "Minimum order quantity" in the Material master data.
Go to change mode of material master (MM02), enter your material number, click enter, select the "Sale org 1" tab and continue.
Now, in the "Sales org 1" tab , scrolled down and you will find a field "Minimum order quantity" as you required, save it.
Suppose, you have entered ,minimum order quantity as 10 pcs.
If you create an order for that item and if the quantity is below 10 pieces then system will give you "warning message". This is normal standard setting.
If you want that system should give "Error message" instead of "Warning message" , then go to transaction code "OVAH".
For combination "V4" and "082", change the sytem message to "E" (normally you will find here W).
NOW, SYSTEM WILL GIVE YOU ERROR MESSAGE IF YOU ENTER , in the Sale order, order quantity which is less than the minimum order quantity as specified in the material master data.

How Order was transmitted even if the quantity was less than the minimum

Hi All,
We have an issue where an order has been transmitted for 23 cases where minimum is 25. This order came through even if this order is for that part of the region that should not be able to tranmit orders if under min..
Being a technical guy, I am not able to understand the issue itself.
Doubts :
1. How an order is supposed to be transmitted ?
2. What is this minimum below which an order should not be transmitted? Where this minimum value is defined ? Is it specific to customer or specific to area or specific to plant?
In which table or through T-Code I can check this minimum ....
Can you please guide how to explore the above....
Thanks in advance.
Regards

Sanjeet,
Check the table MVKE
MVKE~AUMNG
MVKE~LFMNG
thanks\
Mahesh

Purchase order to Asset non imposed the Internal Order.

I'm entering a purchase order of an asset tied to an internal order of investment. The order has a budget X. If I enter a purchase order with value greater than the amount budgeted in the internal order, the system allows me to create the request and not imposed the internal order. In the report S_ALR_87013019, the order has no value released.
How can the system do not allow the purchase of assets with values greater than estimated and how to make that encumbers the purchase order and appear in the report S_ALR_87013019?
This only happens in the purchases of assets!
Thanks in advanced!
GLMacedo

My friend, see my answer to witch point.
1. Your Asset APC account should be Category 90 (Statistical) Cost element
The Internal Order is Statistical (I see in KO03). Should I verify in another place?
2. your Internal Order must be of category "Investment" and not "Overhead"
OK
3. Assign this Internal order in your Asset Master in the field "Investment Order"and not "Internal Order"....
OK
if Investment Order is not visible in Asset Master, change your screen layout of the asset and plug it in (IMG > AA > Master Data > Screen layouts)
4. Do settings in T code ACSET - Allow EAUFN for Trn Type = *, Acct Assign Type = APC Postings, and check the Acct Assgn check box
I don´t know how can I do this. How Can I Do?
Allow commitment management in your contr area OKKP and in your Internal order type (KOT2_OPA)
My type Order (investment) in KOT2_OPA is OK (commitment management was allowed). But in OKKP it is not! It is a critical setting. Should I flag this field?
6. Feield Status Group of Asset must allow CO/PP Order in OBC4
OK
Thank you very much!

Confirmed quantity is less than open quantity in sales order

when i create a sales order the Cumm ATP quantity was less than the amount specified in the sales order, i checked my stock and i have enough stock yet my delivery quantity is less than my sales order quantity and if i maually try to increase the amount in the delivery to what i have in the sales order it gives a message only xxxxx available . what can i do?

Date               MRP e                                                             Reqd Qty     Confmd    *** ATP
01.09.2011    Stock                                                                    457
15.08.2011    CusOrd Totals record                                           20 -               0             0
19.08.2011    CusOrd    Totals record                                       3,780-         3,780         0
30.08.2011    CusOrd    Totals record                                       975-           300        3,323-
31.08.2011    CusOrd   Totals record                                       150-            150         3,773-
01.09.2011    SLocSt                                                                 0401           378         378-
01.09.2011    SLocSt                                                                 0402            79            79
I have put the text above for your use, so you can now help me out, i hope to hear from you soon.

Budget control - Assigned funds are less than payment budget for fiscal year in document item

Dear Experts,
We are using Former budgeting, when ever we run the transaction FMBV getting the following message to a particular user.
Budgeting
Assigned funds are xxxx BHD less than payment budget for fiscal year
2014 in document item XXXX /XXXXX .
And also when purchasing creates the PO getting similar message to a particular user.
Purchase order 450000XXXX
Assigned funds are XXXX BHD less than the commitment budget for
fiscal year 2014 in document item 010 XXXX /XXXXX .
How to know where these users were maintained.
Thanks for the help

Hello Itai,
Sorry for my late reply. Have you been able to find a solution for this?
If not, please update, otherwise please make this thread as answered.
Sorry for the delay...
Kind regards, Mar.

Surcharge should be automated in pricing when order value is less

Dear all,
There is a client requirement where in if the order value is less than 1000 Rs. then a min surcharge of 2% has to be calculated in the pricing procedure automatically.
Right now they are giving this condition manually.
There is a cond type : SURG this has to automatically flow into the system say 2% or 3% or Fixed amount say 200 or 300 ( client is yet to decide on the amount ) when the order value that is when the user input PR00 which is lesser than 1000 then this surcharge condition type with whatever percentage or fixed amount kept in the condition record   should come automatically.
Valuable inputs required.

Hi, ram
The thing is I dont want the system to replace the PR00 price. when ever the PMIn condition type comes.
The senarion is
When ever the sales order value is less than 1000, say that PR00 is manually entered for 800 or 900 or 999 then there should be surcharge calculated say for 2% on basic price and the basic price should be there. and this surcharge condition type should come automatically when the price is gettng inputed for 800 through PR00.
And then finally total value will be displayed.
Hope this above   example is clear , will the above logic which you have mentioned will work on this case.?

SRM and SRM-MDM: Error when ordering less than Price Base Quantity

Hi!
We face the following issue:
We have an item without material master in the MDM-catalog. The price is scaled, and 5.00 EUR up to 100 items, and 4.80 EUR for more than 100 items
If we order 90 items, the price is calculated to 5.00 EUR in MDM, BUT the price is displayed as 0.00 EUR per 100 items when transferred to SRM. The price is also 0.00 when transferring to SAP ERP backend.
If we order 100 items or more, the price is calculated correctly in MDM, and also transferred correctly to SRM and ERP. This also applies if we order e.g. 110 items - everyting looks correct (price for 110 is 5.28 EUR).
AND: in both cases, we can observe the price is correct in the OCI !
So, something happens in SRM if we order less than the Price Base Quantoty
SRM5.0, SRM-MDM 2.0
Since the price is correct in the OCI we would suspect the error to be somewhere in SRM? Any ideas?
brgs ziggy
Edited by: ziggy ziggy on Oct 27, 2009 10:35 AM

Hello Ziggy,
Could you please check OSS notes 1311046 and 1296024.
We found OSS note 1339905 and in the correction instructions were quite a few notes relating to a '0' price issue.
Obviously I don't know on which support pack level you're on.
Good luck,
Franz

Overall budget less than cumulative budget

Hi,
I have try to return the budget amount in im52, im38 but i am receiving the error message like
Message no. BQ155
Diagnosis
The overall budget        14,678,166.00 GBP in operative element NATIONS
& REGIONS - ENGLAND is less than the accumulated budget
98,388,500.00 GBP.
The accumulated budget is the total of the annual budgets.
Please help us to solve the above issue with steps.
With regards,
v.k

Hi,
Thanks for your reply. I am receiving same error as mention above. CJ 30
Budget amount 1325100
current budget 1325100
Distributed      1294917
Distributable     30883.
But when go to im 38 or im 52 before doing any transaction if do checking i am error message is like above .
At Project level
Current budget 1325100
Distributed      1294917
Distributable     30883
At Position Id Level
Current budget 14,678,166
Distributed        14,678,166
Distributable       nil
Cumulative      98,388,500
Remainder     -83,710,334
Carry forward 22,081,288
There problem is at Possition ID level. There is mis match between Current budget and Cumulative.
I have applied sap note 1230375 also.
Kindly do the needful.
Thanks.
With regards,
V.K

SALE ORDER QUANTITY LESS THAN DELIVERY QUANTITY ? NO CECK IN SAP ??

Hello friends,
        I created a sales order of quantity 10 , having two material codes each having quantity 4 and 6 . i created delivery for the one by putting delivered quantity 4 and save , then i created delivery for second and put delivered quantity 8 which was greater than the sale order quantity left ,system saved the delivery and didn't popped any error message.
                                 Does SAP have options to over come this mistake by end users.
regards

Dear Joshi,
                  Please get in touch with your abap er as there user exits which can be written to avoid this situation.
                  Let me explain you further one more situation.
First one, Your query is if for item A ord qty is 6 the system saved the delivery with 8 qty which is greater than ordered quantity. I know the gives a warning doing this.
Second Situation :
Say item A ordered qty is 5, and i made a delivery for 3 and saved it. Now the open quantity on the order is only 2. (5 -3 =2). But one of our users reduced the ordered quantity to 2 despite saving a delivery with quantity 3.
so the situation is ord qty is 2 and delivered is 3 qty. which is again wrong. But while reducing the ordered quantity less than the delivered quantity the system gives a warning message telling " ORDERED QUANTITY IS LESS THAN DELIVERED QUANTITY ".
Also just imagine we made delivery for qty 5 and invoiced it.After which you reduced the delivered quantity to say 3. So delivered is 3 but invoiced is 5.
Hence for these kinds of practical problems we have addressed them through user exits with the help of our ABAP'ers by turning those warning messages into error messages by selecting the suitable message class.
Hope the explanation helps you. And thanks for all your patient reading.
Reward points if useful.
Thanks & Regards
Sadhu Kishore

Stop new planned order when process order GR qty less then sales order qty

Hi All,
How should SAP be configured so that when a process order is GRu2019ed, the sales order requirement is fulfilled regardless of the quantity difference between the sales order and process order?
The system behavior we are currently experiencing is MRP will generate another planned order for the fixed lot size if the GRu2019ed quantity is less than the sales order quantity.
Additional background information:
                Make to order scenario
                Process industries
                Batch control
                Warehouse management
                Fixed lot size
Any comments or suggestion are welcome.
Thanks.

Brahmaji,
Thanks for the reply.
I agree that changing from FX to EX will produce a planned order for the quantity difference (SO qty less the GR qty). So this would be an improvement to our present situation, but not quite what we are looking for.
The system behavior we want is MRP to ignore the requirement for the difference, in other words, when the GR is done for the entire batch quantity, we won't be producing any addition product. The sales order would be considered complete.

Budget Exceed Issue in work Order (P.O) in Production Server.

Hi Friends,
I am getting different type of budget exceed issue, that to only in Production server.
Here the issue is when I am creating the work order P.O (Acc.As. Cat.P, Itm Cat. D) with different service line items with respective WBSe with in the budget limit, then I am doing SES for some quantity, now when I am changing (I am decreasing not increasing) the same P.O line item available quantity and creating the new version now system is calculating the old version line item quantity + new version quantity (nothing but double) then giving budget exceed error.
One more strange thing is, if I change quantity for one line item then system is giving budget exceed error for another line item which is having the different WBSe which was saved with out giving any error at the time of P.O creation.
This issue is happening only in Production server ....same scenario I have run with the same values in both Dev. and Qau. (Where the config. is same in all 3 clients) but in both the clients it is working fine...but in production why the system is behaving in such a way I am not getting.
In the below I have given the test scenario...
Service P.O Creation
Line Item
P.O Quanity
Value
WBS
Budget
Commitment
SES. Quatity
Actual cost
1
10
100
WBS 1
2000
1000
5
500
2
20
200
Wbs 2
4000
2000
10.00
1000
3
30
300
WBS 3
6000
3000
15
1500
4
40
400
Wbs 4
8000
4000
20.00
2000
Service P.O change with new version
Line Item
P.O Quanity
Value
WBS
Budget
Commitment
SES. Quatity
Actual cost
1
6
100
WBS 1
1000
1000
5
500
2
20
200
Wbs 2
2000
2000
10.00
1000
Budget exceed with the double value
3
30
300
WBS 3
3000
3000
15
1500
4
40
400
Wbs 4
4000
4000
20.00
2000
If any one has come across with this type of issue and solved ...please suggest me ..
Regards,
Srikanth

Hi,
I have face similar issue in deleting PO line items.
Even though I delete items, system check budget for deleted qty with the currency conversion + value & gives budget exceed error.
In some cases we have asked user to deactivated AVAC asked to do the transaction, which is not recommended.
You can try running CJBN & CJBV in sequence for affected WBS.
Thanks & reg,
Sam

Total budget 0.00 EUR in order 12412100 is less than the cumulative bud

Similar Messages

Maybe you are looking for