Total of line items in line item file not the same as in statement file

Hi,
Can anyone give an idea about this error?
I analysed teh multicash file for the totals and line items total ties out with the statement total and formats of the file also seem to be fine.
not sure why the error persists?
Raj/

You should give the exact message, with message number.
If it is FB 777, "DTAUS: Number of line items not equal to control total; see long text", you should see the long text. I think it contains sufficient information:
Text
DTAUS: Number of line items not equal to control total; see long text
Diagnosis
data records of record type 'C' were handed over in the file you
    imported. There must be data records according to the control total
    from the fourth field of record type 'E'.
Processing was therefore terminated.
The DTAUS file was not imported into the bank data clipboard. No
    postings were generated.
Procedure
Inform your credit institution about the error which has occurred and
    let them give you a correct DTAUS file.
No actions are necessary in the SAP System.

Similar Messages

Line item Ship-to Info is not the same in Header Ship-to Party During Sales Order Creation via IDOC

We have observed that during creation of sales order using idoc, the line item ship-to party is not the same with header ship-to. The ship-to party info in line item is equivalent to the header's sold to party. To give you a quick background, Sold to party info is given in idoc and ship to party is being determined using table EDPAR. In this specific scenario, sold to customer is not the same with ship to customer.
Initial checking on the code leads us in function module VIEW_KUAGV. This FM populates partner details of sales order header and line item in program LVEDAF1Z
Below is the code for Sales order Header. Notice that WE_INPUT parameter which contains Ship to party is passed as exporting parameter in FM VIEW_KUAGV. This is the reason why Ship to Party is populated correctly in sales order header but not in sales order item.
Initially, it first set to Sold-To Party. However, if WE_INPUT is given or provided, partner details is set to Ship-To Party.
Please advise on how we can make the ship to party info in header and line item be consistent. This is SAP Standard program which why we are hesitant to make change on the program. If there is a configuration to make this happen, kindly advise.
Regards,
Rommel

Hi Jayesh,
If I understand you correctly, you want that when creating SO from Quoatation
the Ship to Party also follow/copy Ship to Party from Quotation, right?
Just to confirm with you, when you creating SO reference from Quotation, you
use copy/follow-up function, am I right?
You can do this by setting in configuration of Copy Control (like mentioned by Hui).
Step as follow :
1. Go to IMG->CRM->Transactions->Basic Settings->Copying Control for
    Business Transactions
2. Create your BAdi (Business Add-In for Copying Control), such as get Ship to
    Party value from source document and use it in current document
3. Use this Rule you have created in BAdi (no. 2), in copy control transaction type
    IMG->CRM->Transactions->Basic Settings->Copying Control for
    Business Transactions-> Define Copying Control for Transaction Types
4. Here you set Copying Routine for your transaction types (put name of your Badi
    created in step no. 2)
Or alternatively, you can set it on access sequence in Partner Function
Ship to Party in configuration. You can define access sequence the Ship
to Party is taken from Preceeding Document -> Ship To Party
1. Go to Partner Function access sequence :
    IMG->CRM->Basic Functions->Partner Processing->Define Access Sequence
2. Create new access sequence with following entry :
    - Source COM_PARTNER_A (PrecedingPartner)
    - Check Mapping for Partner Being search
    - Partner Function in Source = Ship To Party
3. Assign this Access Sequence in you Partner Function used in Sales Order Transaction
   Type.
Tell me if this is what you looking for
Gun.

Data Guard: standby archivelog files not the same as the primary archivelog

From reading the Data Guard doco, one gets the impression that that the standby redo archive logs are just a mirror of those from the primary, that the shipped and applied archived redo logs from the primary are what end up in the standby archive directories.
However I have noted that the files are not the same (md5sum is different), which is concerning as using Oracle's archive log naming recommendation, the files have identical names.
Does this mean that the Standbys redologs can not be used as a source of redo logs if one had to restore using a backup of the primary database?
i.e. Can you recover using an RMAN backup of the primary, and redo logs from the standby?

Hi MSK, I agree, that's exactly what I thought. I'm confused though why the logs do not match. Perhaps it is just metadata in the log that has changed, not redo data.
Anyone have any knowledge on why the archivelogs are different on the standby to those on the primary?

Library file not the same when inserted.

Hello all.
In Dreamweaver 8.0, I have a library item. When I insert it
into a page, I thought Dreamweaver kept inserting an older version.
I open the library file from the Assets panel, make sure it is
correct, save it, hit the refresh button in the Assets panel, and
I'm still getting an older version on my page.
I've also tried recreating the site cache.
However, I'm wondering if I'm getting a different problem.
My library item is a set of navigation links, and the whole
site is a subdomain. Not so unusual in itself. But because this
file is in the folder 'library', all of the links are pointing to
the library folder instead of the (sub) root folder. So I added the
folder name to the links. Would Dreamweaver be automatically
stripping the information, thinking it's redundant?
This is my library item, a drop-down menu.

Use a server-side include instead....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Murray *ACE*" <[email protected]> wrote
in message
news:[email protected]...
> This isn't going to work in a subdomain.
>
> --
> Murray --- ICQ 71997575
> Adobe Community Expert
> (If you *MUST* email me, don't LAUGH when you do so!)
> ==================
>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
> ==================
>
>
> "Virginia Oh My" <[email protected]>
wrote in message
> news:[email protected]...
>> Hello all.
>> In Dreamweaver 8.0, I have a library item. When I
insert it into a page,
>> I
>> thought Dreamweaver kept inserting an older version.
I open the library
>> file
>> from the Assets panel, make sure it is correct, save
it, hit the refresh
>> button
>> in the Assets panel, and I'm still getting an older
version on my page.
>> I've also tried recreating the site cache.
>>
>> However, I'm wondering if I'm getting a different
problem.
>> My library item is a set of navigation links, and
the whole site is a
>> subdomain. Not so unusual in itself. But because
this file is in the
>> folder
>> 'library', all of the links are pointing to the
library folder instead of
>> the
>> (sub) root folder. So I added the folder name to the
links. Would
>> Dreamweaver
>> be automatically stripping the information, thinking
it's redundant?
>> This is my library item, a drop-down menu.
>>
>>
>>
>>
>>
>> <div style="position:absolute; width:288px;
height:23px; z-index:11;
>> left:
>> 607px; top: 238px;">
>> <div align="right">
>> <select name="name"
onchange="MM_jumpMenu('parent',this,0)">
>> <option selected="selected">Quick pick
Menu</option>
>> <option value="../subdomain/page1.htm">Page
1</option>
>> <option value="../subdomain/page2.htm">Page
2</option>
>> <input type="button" name="Button1" value="Go"
>> onclick="MM_jumpMenuGo('name','parent',0)" />
>> </div>
>> </div>
>>
>>
>> When I insert it into my page, it is all the same
except for the links,
>> which
>> are changed to this:
>>
>> <option value="../page1.htm">Page
1</option>
>>
>> This is telling the link it's in the Library folder,
which it's not.
>>
>> Thanks for your help.
>>
>> Virginia
>>
>

Target file of the same name as source file

Hi,
    I am working on a file to file scenario. I need the target file name to be same as the source file name.
    I checked the adapter specific message attributes in the sender as well as receiver file adapter,and also checked the file name.
    Now am using variable substitution for the file name in the receiver file adapter.
    I defined the variable value as :
    message:FileName
   But no file is getting created in the destination folder.
   Can anyone help me out with this.
Thanks and regards,
Pravesh Puria.

Pravesh,
If you have selected File adapter --> Adapter Specfic Attribuest --> File name in the sender and receiver file adapter , then do not go for variable name substittutuion.
Just make a dummy file name in the receiver file adapter for the file name field and XI will automatically use the same file name as the source when creating the file.
Regards,
Bhavesh

I just downloaded a few tv show and the 'info' / 'description' section has not downloaded for the episodes...on previous items it has downloaded just not the recent few? Any ideas why?

I just downloaded a few tv show and the 'info' / 'description' section has not downloaded for the episodes...on previous items it has downloaded just not the recent few? Any ideas why?

Check permissions and ownership of the files. Maybe this helps....
How to Take Ownership and Grant Permissions in Windows Vista

The screen resolution in 1920x1200 dropped on my MacBook Pro 17". Seems like I have not the same pixels. There are also vertical, thin lines on the screen. Makes the screen look milky. Anybody knows what's going on and how to fix it?

The screen resolution in 1920x1200 dropped on my MacBook Pro 17". Seems like I have not the same pixels. There are also vertical, thin lines on the screen. Makes the screen look milky. Anybody knows what's going on and how to fix it?

Take it to an Apple Store or other service provider for testing.

VBAP is hving 3 items, while VEDA only 1 for the same VBELN ????

Hi Experts,
1 - Why the Item # is 000 in VEDA (Contract Data)table, while its (item #) is 10 in VBAP for the same VBELN and for the (very first) same item?
And in some cases,
2 -The VBAP is hving (say) 3 items, while in VEDA only 1 item for the same VBELN?
thanq.
Message was edited by:
Srikhar

ThaQ sESHU;
UR STATEMENT:
<i>In my system i have 000,010 Items ,this table will not have many items ,maximum one item,while selecting data btw VEDA and VBAP ( Keep VBELN is common field ,do not keep item number )</i>
but, in my case, the STKEY differs based on Item #.
say, Item 10----> stkey = A
while, say, Item 20----> stkey = B
So, I forced to mention the POSNR too! So, my SQL is,
IF WA_VBAP-POSNR = 10.
SELECT SINGLE VLAUFK
FROM VEDA
INTO WA_VLAUFK
WHERE VBELN = WA_VBAP-VBELN
AND ( VPOSN = 000 OR VPOSN = WA_VBAP-POSNR ).
endif.
Any comments?
thanq.

Is it possible to upload multiple files at the same time?

Hi folks,
It seems pretty trivial to implement a file upload item, but is there some way to allow selection (upload) of multiple files at the same time? Seems like this has probably come up before, but I didn't find much for solutions in my search. Any links or insight would be appreciated.
Thanks!
-Adam vonNieda

Thank you both for your replies.
@Manish - That does allow for multiple file uploads without refreshing the page, but does not allow for multiple file uploads at the same time.
@Tony - That might be the way I end up going, although I probably should have been more specific. It would be really nice it there was a way to do a mutli-file select using the control or shift button like you can with a standard file selection dialog (if you want to copy multiple files, for example). Having a separate line for each file browser means there has to be a limit on the number that can be selected at the same time.
Has anyone implemented a method of selecting multiple files at once, and hitting an upload button once to get them into the database?
Thanks again Manish and Tony, very helpful.
-Adam

How can I overwrite a file with the same name in Content DB?

Hi All,
In Content DB if I upload a file with the same name as a previous one, the application shows the warning message:
" ...You cannot upload "XXXXXX.doc" to "Test 1" because an item with the same name already exists ..."
And the alternatives are "Create Version" or "Cancel" the operation. Is there any way to overwrite a previous file as we can do it in Oracle Files ?
Regards
Harvey

Hi All,
Can anybody from the Content DB product development answer this question?
Regards
Harvey

2 different files in the same location?

When we upload files they go all in one folder.
The first editor calls his graphic "Picture 1.png" (wonder where that came from..)
Sure sometimes before the item gets deleted another one will upload an completly different picture with the same filename.
The thing that it different between the 2 would be the Asset ID. So I was wondering if there is a way to make folders with asset IDs in the location where everybody uploads there stuff to.
To tidy up on the long run I guess we just would need to delete the empty folders (as the content has been archived).
How would I do this? How do other people deal with the same filenames for different files? It even happens within the same production so the solution to create an subfolder for each production (read this a while ago) does not work for us.
I know that for future projects we will tell people to use more describing filenames (but even there: there might be two different kitchens called the same..) but I also talk about a huge, messy archive to migrate..
thanks
tobi

Let me rephrase things a bit as I used the term Excel chart to literally. We create charts in SSRS. We then use a query string that includes "rs:command=render&rs:format=Excel" to get the chart into Excel. The "chart" in Excel is really just an
image and the associated data table is the cells filled in with the data. We then "select" the area that encompasses all of these objects and paste that into the PowerPoint slide.
Our source folder structure is as follows (note that I while I am being generic, the Ecel file names are the same between folders:
Folder A: File1.xls, File2.xls, File3.xls ..... File40.xls
Folder B: File1.xls, File2.xls, File3.xls .....File40.xls
This goes on for 8 folders but can be as many as 30
The routine we use to create the xls file from the SSRS chart names the xls file and puts it in the correct folder.
The idea was we would create a template chart set in PPT for folder A and then create copies of the PPT and change the links to point to Folder B, etc.
We have ensured that all Excel Documents are closed when we try to do an update.
We are also getting the following error and I'm paraphrasing: Cannot open multiple instances of a file of the same name even if it is in a different location. This occurs when doing an update links when we don't get the initial error message I listed first.
If we change the names of the files in each folder: i.e. FolderAFile1.xls, FolderAFile2.xls, etc then we can do the update links. This is time consuming as the SSRS exports are done by the end users and we are the developers trying to create a reusable solution.
One other issue we are seeing which I hope you can address is that when we are getting the update links to work, the process opens up each Excel file THREE times. It takes almost 15 minutes to update a PPT with 18 linked xls files.

How do I make Applescript to compress 2 filez with the same name?

Hello guys and thank you for reading this!
I don't know a lot about programming, but i believe applescript can save my life. What I need is.
Detecting 2 files with the same name, but differnt extension. (song 1.jpg, song 1.mp3)
Compressing those 2 files into a single .zip (In the end I would have song 1.jpg, song 1.mp3 and song 1.zip
And that's it! I know its pretty simple, and I've seen the "Create Archive" in automator, but I don't really know how to tell him which files to Compress.
Thanks again!

Hi,
Try this script :
set sourceFolder to choose folder
tell application "System Events"
      {name, name extension} of (files of sourceFolder whose name extension is not "zip")
      my compress2FilesSameName(the result, sourceFolder as string)
      repeat with i in (get folders of sourceFolder) --check in subfolders
            {name, name extension} of (files of i whose name extension is not "zip")
            my compress2FilesSameName(the result, path of i)
      end repeat
end tell
on compress2FilesSameName(tList, tFolder)
      set tnames to item 1 of tList
      set tExtensions to item 2 of tList
      set tc to count tnames
      set j to 1
      repeat while j < tc
            tell (item j of tExtensions) to if it is not missing value or it is not "" then
                  set n1 to (count) + 2
            else
                  set n1 to 1
            end if
            tell (item (j + 1) of tExtensions) to if it is not missing value or it is not "" then
                  set n2 to (count) + 2
            else
                  set n2 to 1
            end if
            set name1 to item j of tnames
            set name2 to item (j + 1) of tnames
            if (text 1 thru -n1 of name1) = (text 1 thru -n2 of name2) then -- same name
                  set tFile1 to quoted form of POSIX path of (tFolder & name1)
                  set tFile2 to quoted form of POSIX path of (tFolder & name2)
                  set zipFile to quoted form of POSIX path of (tFolder & (text 1 thru -n1 of name1) & ".zip")
                  do shell script "/usr/bin/zip -j " & zipFile & " " & tFile1 & " " & tFile2
                  set j to j + 2
            else
                  set j to j + 1
            end if
      end repeat
end compress2FilesSameName
if an archive already exists with the same name (in the parent folder of the files to compress) , the ZIP command overwrite this ".zip" file.
Example with "song 1.jpg", "song 1.mp3" and "song 1.zip" :
If "song 1.zip" doesn't exist, the ZIP command create the "song 1.zip" file.
If "song 1.zip" exist, the ZIP command overwrite the "song 1.zip" file (it will not create a new archive).

How to open a file with the same name?

Hi, now I practicing making web pages where I put sample codes in one directory and I copy them to edit.
The probrem is, I couldn't open one file while I'm opening another file with the same name.
Is it possible to open a file with the same name in Dreamweaver?

That could be a very error prone practice.
May I suggest you take advantage of DW "Snippets" feature instead.
Simply save any blocks of code you will reuse regularly as snippets,
and give each one a descriptive name you like.
Then you can simply place your cursor in code view where you wish the code,
and click insert on the selected item from the snippet panel.

How to put two files with the same name into the same folder?

How can I put two files with the same name and the same extention into the same directory?
Is this even possible?
Thanks in advance.

Are you sure? I would be very surprised if that was the case.
How does the computer/filing system differentiate the files, if not by their names?
How do you tell the computer which one you want? (On the command line.)

In search results, Summary sometimes shows the top of file, not the text I searched for

I'm searching lots of html files, it's a web site that's not imported into Sharepoint. Search is returning the correct files, but about half the time the Summary contains the text at the top of the html file, not the text surrounding the text I searched
for. It's a big problem, users have to open the file then find the search text to see if it's useful.
If I search for 'potato' here's an example Summary which is ok:
All pages in issue FTDA-1983-0409:
00010002000300040005000600070008000900100011001200130014001500160017001800190020
… today's dieticians, the potato … most of us enjoy a
potato cooked …
Here's a Summary just showing text from the top of the file, 'potato' is present, but lower in the file:
0001000200030004000500060007000800090010001100120013001400150016001700180019002000210022002300240025002600270028
… issue: date: January 19, 1980, page …
Could anyone help me get it to consistently show the text around the search text please?

You can't attach a screenshot to the first post that starts a thread, but you can do that in subsequent replies.
Does this only happen on one specific website?
Can you post a link to a publicly accessible page (i.e. no authentication or signing on required)?
It is possible that there is a problem with that web page and that there is a clear:both CSS rule missing that causes Firefox to start the next line at the horizontal position where the previous line ended.
If you have made changes to Advanced font settings like increasing the minimum/default font size then try the default minimum setting "none" and the default font size 16 in case the current setting is causing problems.
*Firefox > Preferences > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
Make sure that you allow pages to choose their own fonts.
*Firefox > Preferences > Content : Fonts & Colors > Advanced: [X] "Allow pages to choose their own fonts, instead of my selections above"

Total of line items in line item file not the same as in statement file

Similar Messages

Maybe you are looking for