Totally erased, now: use itunes to restore your ipod... ??!

Ok well, I just connected my ipod as usual to add some music. When I return to my PC after 2 hours, my ipod seems to be completly empty . I tried to connect it again, and it recognized it, ok well, no problem I think just put all your 2000 songs on it all over again. After some weird errors, the screen stays frozen on o not disconnect.
I solved it using the 2 button press thing. And now it all of the sudden sais: COnnect the ipod to your computer, use itunes to restore.
As I connect it to my computer, nothing happens. I see it as mass device (not Ipod anymore), and Itunes doesnt recognize it.
Itried using the updater and try to restore, but no, updater freezes up everytime I try.
I've tried a lot of things now, and it doesnt respond at all.. does anyone has a clue??
thanks in advance!
Marit

Disconnect the ipod and keep it in "DIsk Mode" for now.
In Windows, Goto control panel>add and remove and uninstall iTunes AND quicktime (You will not loose any music or playlist).
Scan the system for malware with ewido http://www.ewido.com
Now disable antivirus AND any other security programs and goto apple.com to download/install iTUnes again.
Reboot the PC, Disable your antivirus/security programs, Open the ipod updater THEN connect the ipod in disk mode to the PC and try restoring it

Similar Messages

Use iTunes to restore? iPod in recovery?

I just bought a nano today, my first ipod, and I don't know what's wrong with it.
On the display it says "use itunes to restore", but when I restore it using itunes, itunes says it has detected an ipod in recovery mode and the says I have to restore it before I can use itunes.
I've tried all the troubleshooting suggestions, although I'm not sure I did them properly.
Can anybody help?

Try here.
http://docs.info.apple.com/article.html?artnum=304503
If you are stuck in the recovery loop, try this.
Click on control panel/admin tools/computer management/disk management/right click on the iPod to re-assign the drive letter.
Choose something lower down the alphabet, say 'M' or something similar.
The iPod can be confused by any other storage devices assigned a similar drive letter even though they may not connected at the same time.

How to use itunes to restore my ipod classic

How to use itunes to resotre my ipod just got it and now i cant. please help it a classic ipod 30gb.

I'd try taking it to the nearest Apple Store and see what they have to say.

Made HDD, Battery and case upgrades to my ipod video 5th Gen and now I am told "Connect to your computer. Use iTunes to restore."

I have a 5th Gen iPod Video that I have had many years now. It has worked faithfully until about 2 weeks ago and the HDD totally died on me.
So I decided to upgrade from a 30 to 60 gb HDD, replaced the battery for the appropriate HDD and bought a new back shell for the unit. I made incremental installations as parts arrived. First the HDD itself and the next day the battery. Both went in with no problem and I have been running them in a jerry rigged case (basically the 30gb back case has been taped together to make sure it was going to work OK. I have been taking it to work with absolutely no issues, great response and great battery life. Synching is fabulous.
Here is the issue, I hope this makes sense...
Today I received my 60 GB silver back cover and moved all of my parts over. It seems to fit fine. Headphone jack is working fine. However, now the hold button is unresponsive (which is not a big loss to me but still just so you know). I can play music and I can sync. However, if I restart the unit, or I try synching a second time, I get screen saying "Connect to your computer. Use iTunes to restore." It does not matter if I snap it shut or leave the case loose, this happens.
I have this error until I open my case up again and do nothing else. At that time, the error goes away, and my ipod is fine again. Then, the screen comes back after restarting to a normal boot. But, if I sync or restart without doing anything else, we go through the motions again until I open the case back up.
I have disconnected the battery as well as the HDD, but still have the problem. I have also disconnected the cable coming from the hold button/earphone jack to the M/B,
Has anyone else ever experienced this issue or have any suggestions.

Shouldn't you contact the vendor or person who sold the back cover? At the very least, it has a Hold switch that doesn't work.
This web site has repair guides
http://www.ifixit.com/Device/iPod_Original
and they call it "Headphone Jack & Hold Switch"
http://www.ifixit.com/Guide/iPod+5th+Generation+%28Video%29+Headphone+Jack+%26+H old+Switch+Replacement/604
Under Relevant Parts, they seem to list separate parts for the thick and thin back cover.
On a side note, another way to fix your iPod is to use a compact flash card instead of a hard drive. This web page has details
http://www.instructables.com/id/Convert-your-5th-Gen-iPod-Video-to-use-Flash-Mem or/
Then, you can use your existing thin profile back cover that works. I replaced the hard drive in my 4th gen iPod with a CF card. Currently, it is only 8GB, but with lower prices these days, I may soon upgrade it with a 64GB CF card. But it works great with the 8GB card. The iPod is noticeably lighter. There is no hard drive spin-up delay. The battery lasts longer per charge. And it is no doubt more shock-resistant.

"Connect to your computer. Use Itunes to restore" Help!

Happy Holidays!
I am a first time Ipod user and I now have a 30GB that I am trying to figure out.
I was messing with it last night and it kept flashing "Do Not Disconnect" so I left it overnight to charge. It wasn't recognized in my Itunes at all (but was by my computer) which I figured because I haven't downloaded the latest version. In the morning, my computer had a message saying "Device was disconnected" and now I have a permanent message "Connect to your computer. Use Itunes to restore" and I am having a hard time resetting it.
Sorry if this is a stupid question! I have never used one before! Just trying to figure it all out.

welcome to discussions!
Have you tried the five r's? (http://www.apple.com/support/ipod/five_rs/)
Also, to get rid of the Do Not Disconnect you have to eject your iPod. See the articles below for information on how to eject your iPod.
http://docs.info.apple.com/article.html?artnum=61135
http://docs.info.apple.com/article.html?artnum=93492

IPOD ERROR MESSAGE: Connect to your computer. Use Itunes to restore.

Whenever I turn my ipod on after its been off for a few hours the screen displays "Connect to your computer. Use Itunes to restore" and then goes blank. I turn the ipod back on again and it appears to work normally but the battery is showing close to zero even though it has been freshly charged!
I have restored the ipod several times as it suggests but this does not get rid of the error message. Is my ipod screwed? I'm surprised there are very few posts on this topic too...
I have a 30Gb ipod video running v1.2.1

I just found this support document which explains the issue exactly.
http://docs.info.apple.com/article.html?artnum=303915
Looks like a visit to Regent St is needed.
The reason why I am surprised about the lack of posts on this topic is that I can't believe my issue is so unique. Surely out of the millions of ipod users out there this exact same issue would have been reported more frequently.

My 5th gen Ipod won't do anything but show the " Connect to your computer, use itunes to restore" screen. However my computer nor anyone else's will recognize my ipod. What can I do?

My ipod will not do anything but show a screen that asks to "connect ipod to computer, use itunes to restore" My computer however will not recognize my ipod at all so there is no way to restore my ipod. I am not skilled in computers but if anyone has a step by step that would be great.

Did you try a hard reset with the iPod still connected to your PC? Have you tried multiple USB ports, preferably high powered USB 2.0 ports?
To do a hard reset, first make sure the hold switch is in the Off position, then press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
Have you also worked through each and every single troubleshooting suggestion in this Apple support document?
iPod not recognized in 'My Computer' and in iTunes for Windows
B-rock

My ipod says "connect to your computer. use itunes to restore."

My ipod says "connect to your computer. use itunes to restore."
So I plug it into the computer and itunes says it needs to restore, so I click restore, everything seems to go fine, and it says the ipod needs to restart, it does, has a lil progress bar go across the ipod screen, then itunes detects the ipod again and says it needs to be restored again. This is an endless loop, anyone have any idea how to solve this problem?

Have you had a chance to look at this troubleshooting page? Have a look at the bottom section that covers what to try if restoring doesn't work, it may be of some help: iTunes has detected an iPod in recovery mode - Use iTunes to restore

Updated iPod to 1.2 , now it tells 'use itunes to restore'. How ?

Hello, sorry my english.
I have just updated my iPod nano from firmware 1.1.1 to 1.2 using latest iPod Updater 2006-06-28. It went ok.
Then i entered iTunes 6.0.5 and made an eject.
The iPod showed "OK to disconnect". I disconnected.
But now when I turn it on, it shows this message:
"Use iTunes to restore"
How can I do that? When I open iTunes it behaves like there is nothing wrong with my iPod, it lets me add and remove music with no stress. Also I can't find any option on iTunes to 'restore' my iPod. I know how to do that using the iPod Updater (restoring to factory settings) but I can find any 'restore' option on iTunes like my iPod warns.
Can anyone help me? Thank you.

I am having the same exact problem!! like first my ipod nano wouldnt be recognized then finally my itunes said updating ipod dont disconnect..after updating 477 songs it said ok to disconnect so i did nd den it got stuck in this screen that said use itunes to restore nd also it said dat in two otha languages..but im new at this and i have had like every problem there is to have but still can you explain to me wad to do. thanks loves. nicc<33*

Connect to your computer.Use Itunes to restore!

Good Evening all,
I have the 30gig black video Ipod and I am having issues! All that its doing and nothing more is saying "Connect to your computer. Use Itunes to restore" Then it says the same thing in 3 other languages below. Hey that sound pretty simple but when I try and plug it in to my computer it says Do Not Disconnect in small writing. It was actually bigger earlier today. So I tried to run Ipod updater 2006-06-28 it just sits on the screen saying initializing... with absolutly no function. I tried the 5 r's to no avail. It seems I cant do a thing with it. Please help, someone!
30 gig Video Windows XP

Soory guys i just keep messing around and it finally started to work. Thanks.

It says...connect to your computer, use itunes to restore..but it wont work

1st off: i own an ipod video. Ok, so when I turn on my ipod, this white screen comes up and it says connect to your computer, use itunes to restore. And then when I restore my ipod on itunes...it just keeps making me restore it over and over again. I dont no wat to do and I'm getting really frustrated. i need someone to tell me wat to do cause I just do the same thing over and over again, and it doesnt work. Please help me!!!

Have you had a chance to look at this troubleshooting page? Have a look at the bottom section that covers what to try if restoring doesn't work, it may be of some help: iTunes has detected an iPod in recovery mode - Use iTunes to restore

"Connect to your computer, use iTunes to restore" loop! Please help!!

Everytime I try to turn on my iPod, it gives me the "Connect to your computer, use iTunes to restore" message so I use iTunes to restore but once it's "done" restoring, it tells me the iPod is still in Recovery Mode and needs to be restored. Someone told me to change the file to a Fat32 file but it's already a Fat32. Someone else suggested to change the drive letter but , unless I'm not doing it right, that's not working either. Any other suggestions?? Thanks!

Yes, it does need to recognize the iPod in order for you to do something like this.
Have you first tried working through these troubleshooting steps to get your iPod recognized in iTunes?
The Five R's
-Kylene

HT1212 iPhone diabled, tried to use iTunes to restore, but iTunes gives error message (0XE8000084). Now what to try to reset iPhone?

iphone disabled, tried to use iTunes to restore, but iTunes gives error message (0XE8000084). How to restore iPhone?

Try here = http://support.apple.com/kb/TS3221

Ipod nano 4gb use itunes to restore востанавливаю все равно все тоже

ipod nano 4gb use itunes to restore востанавливаю все равно все тоже

restored my ipod and now it works but why does this happen? Is this a hardware problem, if it is, should i return my ipod. Or is this just a software problem that will be fixed in future updates?
I'm not sure why exactly an iPod will say "Use iTunes to restore", but probably just because of a regular internal software problem.
If you're iPod isn't displaying "Use iTunes to restore" anymore, and if it's acting fine, this was simply a isolated incident, which may occur now and then to a few iPods, if they're OS (operating system) gets messed up.
It's similar to if your iPod once apon a time your iPod froze up, then displayed this symbol (it means you need to restore your iPod):
You restored the iPod, and have never gotten that icon or any problems ever since.
Will the need to restore your iPod recurr? It would only be by chance, and not relating to that isolated incident; this is, if you're iPod isn't displaying any failure messages soon after, which indicates a recurring true hard drive problem, not just a temporary one.
If your iPod begins to display "Use iTunes to restore" or other failureful (that's my term for a symbol or behavior that indicates a failure) icons/messages soon after this, you can suspect that your iPod has a true problem with its hard drive/flash drive that a restore didn't fix.
In this case, you would probably send your iPod in to Apple to get it repaired or replaced.
I hope that explanation answers your question.
-Kylene

OMG. All people who get the message "use itunes to restore", click here!!!

ok, this may not work for you, but it worked for me!
by the way, i discovered this on my own, no thx to anyone else.:P
ok, when it says that use itunes to restore"uitr, as ill call it", plug it into ur comp.
ok, now, itll say to restor the ipod, blabla, then click restore, and the message that pops up, DONT CLICK OK YET!!!!!
it totally messes it uP!!!
instead, look at ur ipod screen. u should(hopefully), see a screen with the apple, and a little bar at the bottom that is filling up. wait till it fills up, then the screen will flash and whatnot, and then, when something happens, u will click ok. itll revert to factory settings and all, but u just have to sync ur ipod, and the music will go back in.
FOR THOSE OF U WHO R WORRIED ABOUT LOSING UR MUSIC, DONT WORRY, IT WONT BE LOST, U WILL STILL HAVE IT, TRUST ME COMPLETELY.
DO THIS B4 CALLING APPLE, THEY WILL NOT BE ABLE TO HELP U LIKE I AM, TRUST ME....I CALLED THEM:p LOL.
:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D
have a nice day!:)
Windows XP

Is this a recurring problem with you're iPod? I have a 2nd Gen. Nano, hardly used, maybe twice and this has happened 3 times to me already. I get it to work and then at some point it happens again. How are you handling it or are you just dealing with the problem?
Dell Windows XP

Totally erased, now: use itunes to restore your ipod... ??!

Similar Messages

Maybe you are looking for