Touchsmart Computer not recognizing Wireless N SSID at 5GHz

I have two HP Touchsmart 600-1105xt computers running Windows 7 x64. I have a 802.11n wireless LAN card with Bluetooth and according to system information it is Ethernet 802.3 PCI and the manufacturer is Rankin Technologies. I recently bought a Netgear WNDR 3300 dual band high performance router. The router setup was easy and I set SSID for 5GHz and 2.4GHz. So far, I can only see the 2.4GHz SSID on either computer and can connect just fine, but I cannot see the 5GHz SSID on either computer. I have gone through the Netgear manual and adjusted settings with no solution.
I checked Device Manager and the Network Adapter properties. The Advanced Tab has the following settings:
Adhoc Support 802.11n: disable
Country Region 2.4GHz: #0 (1-11)
Country Region 5GHz: #7 (36-165)
IEEE802.11H: Disable
Multimedia/Gaming Environment: Disable
Power Saving Mode: Max_PSP
Radio ON/OFF: Enable
This indicates to me that my wireless N adapters are capable of both 2.4 and 5GHz on wireless N.
Anything I can do to be able to see both the 5GHz and 2.4 GHz SSIDs?

I have the same exact problem , same wireless card and settings and have been trying to solve it. My PC is 3 weeks old and HP technical support said they can fix it but because it is a "network specialty" problem they want to charge me for their service. No way will I pay, 1. I have a 2 year warranty and 2. brand new out of the box should be 100% operable. Anyway if you find a solution, please email me at [email protected] and I will reciprocate if you forward me your email.
For now trying to get HP to honor their responsibility has been unsuccessful.
Freddy

Similar Messages

Not recognizing wireless keyboard/trackpad/mouse

Just installed windows 7 on new 2012 imac. loaded the support software. still not recognizing the mac's wireless keyboard, trackpad, or mouse. what should I try??

hi
the N70 mouse has a USB dongle to connect to
Spoiler (Highlight to read)
You may be able to connect the mouse but the Keyboard should be a pair SK8861
The SK8861 mouse and keyboard should be a pair because the USB dongle for both is in the SK8861 mouse.
Im not sure If you can pair the SK8861 keyboard with the n70 USB dongle.
But here's how to pair the keyboard. you can try this out with the N70 usb dongle.
Make sure that the keyboard is very close to the dongle when pairing
1. Unplug the dongle from the computer
2. Remove the battery
3. Hold the F2 F3 and F4 keys on the keyboard all throughout the process
4. Use your left had put the battery in but do not put the keyboard battery cover yet.
5. Left hand still, plug in the USB dongle then right away put the keyboard battery cover
Light will blink but once it stopped you can now let go of the F2 F3 and F4 keys and try the keyboard out.
If this does not work You might need to conatct where you bought it and ask about the keyboard and mouse, that it should come in pair" sk8861 mouse and keyboard.
Regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Ipod shows up in My Computer not recognized by ITunes

Video iPod was working then just stopped.
ipod shows up in My Computer, initializes iTunes but is not recognized by iTunes
Windows explorer will display file architecture of ipod but displays a "file corrupt" message if I attempt to view contents of folders on ipod.
Have tried all of the suggested reset, restore, reinstall, manage options and nothing is working.
any ideas?
video ipod itunes 7 Windows XP

See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Featurs appin the Window Control Panel. Then reinstall all the Apple software components
- New cable and different USB port
- Run this and see if the results help with determine the cause (after you do the above)
iTunes for Windows: Device Sync Tests
- Try on another computer to help determine if computer or iPod problem

Computer not recognizing second ipod

The first ipod i setup works fine. When i plug in the second ipod, the itunes does not recognize it. I have created a second account to my XP and installed itunes on it, but i am having the same trouble. the only difference between the 2 is the second ipod is "Product red" - 4G. The first is the 2G. I've done the 5 R's and scanned the messageboards for this, but have not found what works. Please help.

see if any of these articles help.
USB drivers are not installed properly or are out of date.
iTunes 7 doesn't recognize the iPod.
Your Windows PC doesn't recognize iPod</font color</a>.
iPod appears in Windows Explorer but does not appear in iTunes.
iPod does not appear in iTunes.
Fast user switching in Windows XP is not supported.
Windows confuses iPod with network drive
And if your computer is a laptop, see: iPod not recognized on a Windows laptop.

Computer not recognizing new ipod nano.

My computer will not recognize my new ipod nano. It is a replacement for one that was broken.

Have you worked through each and every single suggestion in this Apple support document?
iPod not recognized in 'My Computer' and in iTunes for Windows
B-rock

Computer not recognizing my built in iSight

my computer is not recognizing its camera. I have tried restarting, forcing restart, and holding keys that apple care has previously told me to hold. I checked in my system profile and it does not even show my build in isight. Does anyone have a trick that has worked for them before, or a special way to restart my computer that may fix the problem? i am leaving for europe soon and don't want to mail in my computer if i don't have to!

I have reset the PMU twice and have reset PRAM (holding down apple-option-p-r at startup),I have also repaired disk permissions on my startup disk.
I can get access to the built-in isight for photobooth and other apple applications but as soon as I try to enable it in VMWare Fusion it stops the VMWare machine (Windows Vista) from booting until I disconnect the iSight from VMWare.
The iSight then disappears from the available hardware in VMWare Fusion (so I cannot reconnect it in Fusion) and I cannot access the iSight in any Apple application.
I have Applecare... I think I'll see if I can get any help there.

Computer not recognizing that my ipod is pluged in!!

I have recently reformatted my comeputer and got some new music put on my itunes and when i tried to plug in my ipod it just doesnt do anything...like the little screen on the ipod that usually sais "do not disconnect" doesnt come up...the computer doesnt even accnowladge that anything is pluged in...i tried downloading the newest ipod softwhare and that didnt work...i tried putting in the origional disk that came with it and that didnt do anything...also when i plug my ipod into the computer it drains the battery instead of charging it...suggestions??

I don't know if this might work for you guys but this is what got my problem solved. If you experience the following, the Ipod was working but suddenly it stops working (i.e. the ipod screen is totally blank no icons like battery low or whatever) and when you connect it to the computer the little sign that means do not disconnect does not appear (the pc does not recognized that the ipod is connected) then maybe this might solve your problem. Do not connect the Ipod to the computer for about 24 hours. Do not try to charge it or anything just leave it by itself let the battery drained then try it the next day and hopefully the icon of battery is low will appear then you can charge it by connecting to the pc.
This is what happened to me by accident i guess, i had given up and had realized that i had just spend two hundred dollars on something that didn't work but today i tried to turned it on and the battery is low icon appeared so i connected to the PC and now it works.
Good Luck.

New version of itunes and computer not recognizing ipod nano

I intalled Itunes - version 11 on my laptop. The computer and Itunes does not recognize my Ipod Nano. However it works perfectly find on another computer with Itunes Version 10. Help -- can't sync songs on my Ipod with Itunes.

Hi Glenfromtn,
If you are having issues with your iPod Shuffle not being recognized by iTunes on your Windows machine, you may find the following article helpful:
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/ts1369
Regards.
- Brenden

Computer not recognizing Shuffle

Hi,
I went to plug in my iPod shuffle to load songs and iTunes won't pop up, and it seems that the computer is just not recognizing it.
I also tried it in my Windows computer, and I'm experiencing the same problem. I took it to the Apple store closest to me (unfortunately I didn't make a "reservation" - the guy did look at it though, and confirmed that it was not working properly).
All of the lights come on and everything so it's not like the unit is dead. I just purchased it in June.
Instead of going back to the store, is there a place where I can ship it for repair? Will Apple send me a box to put it in postage-paid?
Has anyone experienced this problem with their Shuffle?
Thanks!

Hello, Adam.
Is this what you're looking for?
iPod Service
srb

Computer not recognizing itunes 7.0 download

After receiving thank you for downloading itunes 7.0 message,for some reason my computer is not recognizing the download and I am in a loop of downloading and thankyou for downloading messages....what gives? How do i launch itunes 7.0 after it has been downloaded?
HP vs17 Windows XP

[u]> After receiving thank you for downloading itunes
7.0 message,for some reason my computer is not
recognizing the download and I am in a loop of
downloading and thankyou for downloading
messages
does a dialog box come up asking if you want to run
or save the installer file? or do you just get the
thank you, with no sign that that the download has
even started?
I get the same problem. I click on the button to download the new itunes and a box comes up that asks to run or save this program. I click run and then another box comes up that says this program has no known publisher. It then asks me if i want to run the program or not run it. I click run and another box comes up that says it is not a win32.exe application. I click ok and the screen on the itunes website says "Thank you for downloading"
what do i do to make this run????
HELP!!!!!!!!!!

Why is my computer not recognizing my phone as a device?

My computer is not recognizing that my phone is plugged in... It will charge it, but it won't download my pictures or show that it is even connected on my devices. I have updated all my itunes stuff and restarted my computed. What do I do?

Sometimes, your Apple ID is actually "username" instead of "[email protected]" Try putting the username of your email instead of the actual address, and see if that works?

HT1386 Computer not recognizing my iPod

My iPod will not sync with my iTunes account. Please advise.

See:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
or
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
Run this to help if it identifies the cause
iTunes for Windows: Device Sync Tests
Have you tried on another computer to help determine if you have a computer or iPod problem?

Computer not recognizing phone but iTunes does

I know there have been several issues with Windows 7 not recognizing iPhones. iTunes does recognize my phone but when I try to sync it my computer does not recognize it. I went to the Device Manager which does show the Apple Mobile Device USB Driver. It says I have the most current driver installed but yet when I go to My Computer it does not show my phone as being connected. Please let me know what I am doing wrong!!!!

Why do you want to see it in "My Computer"?
Have you taken pics with the iphone that you are trying to import?

Computer not recognizing either my nano or shuffle

I have both the nano 2nd gen and shuffle,neither units are being recognized by my computer,in the same instance my girlfriends 4gb nano works perfectly.I have tried multiple suggestions,installed,uninstalled,reset etc.Could they both be junk?

Have you had a chance to look at these troubleshooting pages? They may be of some help:
iPod missing in My Computer and in iTunes
iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
If you are using a laptop, this page might help: iPod not recognized when connected to Windows laptop over USB

New computer not recognizing iPod

My laptop hard-drive crashed, but I had all my iTunes on an external hard drive. My iPod (30GB, noncolor, flywheel) had been synching with the ailing laptop and was not working right (showing the folder/exclamation point sign; when I hard reset it now I just get the Apple symbol and clicking sounds), so I'm assuming my iPod problems are just a reflection of an aborted synch attempt with the dying compueter.
So now I've successfully reset iTunes on my work desktop PC with Windows XP via the external hard drive. I downloaded the latest iPod version onto the new computer but it is not "recognizing" my iPod...it says to plug in my iPod when it is already plugged in. The plugged in iPod seems to alternate between "Do Not Disconnect" and "OK to Disconnect" (with a giant checkmark) messages. Regardless, the iTunes page is not "recognizing" the iPod...
Once I do figure out how to get my iPod "recognized", should I choose to RESTORE or UPDATE it? I don't have playlists or ratings to worry about, just ~3500 preciously selected songs I enjoy shuffling at random.
Thanks!

I cannot "See" the iPod. I have tried it on different computers that worked before with my iPod. On a laptop computer, there is some humming and clicking as if it is about to be recognized, but my iPod never shows up on the iTunes list (under Library, playlists, etc). When I go to "My Computer", there is nothing listed under the appropriate E drive (USB port). On a desktop computer, the iPod actually changes to the "Do Not Disconnect" sign and again there is the expected humming and clicking that suggests it is going to be "recognized", but it never comes up on the iTunes list. Under My Computer, there is a transient picture of something like a hard-drive with a big red questionmark, as if the computer is in the process of "recognizing" something at the USB port, but this fades and then there is intermittently this "removable storage" listed under drive F. As if it is only transiently being "recognized". When I manage to right click on the transient icon under My Computer, I get the list pulled down and left click on "Format..." but nothing happens. Then the iPod screen changes from "Do Not DIsconnect" (which again was an improvement from the other computer where there was no sign the iPod was even attempting to engage with the computer) to the giant checkmark and "OK to Disconnect" sign OR goes back to the "File Folder/! icon". Tried several times....
What do you think?

Touchsmart Computer not recognizing Wireless N SSID at 5GHz

Similar Messages

Maybe you are looking for